ABSTRACT The present study had the objective of analysing the impact of the use of environmental enrichment (music and light stimuli), broiler sex, and age in broiler chickens’ weight during growth. The observational study was carried out on a commercial farm. The environmental enrichment consisted of broilers’ stimulation by sound and light, and a house was kept without stimulus (control). The music stimuli consisted of different music styles and was played during the experiment to promote motivation for the birds. The light stimuli came from a coloured (red and green) LED strobe projector. Both stimuli were applied once a day for about 6 minutes, for five weeks. The broilers were weighed at the end of each week of growth. Throughout the growth period, broiler behaviours were analysed weekly through videos, and the leg disorders of the birds were put into score evaluations. The effects of the environmental enrichment type, gender, and age, and the probable interactions of these variables, on the weight of the broiler chickens were analysed by the comparative analysis of means, analysis of variance (ANOVA), and Tukey test of multiple comparisons. 7, 14, and 21 day old broiler chickens did not differ on body weight when compared with age, gender, and environmental enrichment (broiler house) (p>0.05). Males from 21 days of age had an increase in body weight when compared with females. Light enrichment presented the lowest body weight when compared with all studied houses, while the absence of enrichment presented the highest broiler weight.

ABSTRACT The meta-analysis data were obtained from a survey of published articles over 15 years. The data were selected to classify the factors that impact broiler production and separated by influence aspects of animal production (thermal environment and other factors). The relevant data for each study were systematized, grouped and later tabulated and inserted into a database prepared in a spreadsheet. The variables used to analyze the thermal environment were temperature (comfort, high and low) and performance data (weight gain, feed intake, and feed conversion). The variables used for other features were ventilation (TER = tunnel + evaporative cooling, PP = positive pressure, NV = natural ventilation) and performance (feed conversion, live weight, mortality, and weight gain). The factors that may influence the production of broilers were tested by covariance analysis, Pearson correlation coefficient and divergence analysis, about the Cobb®, Ross® and Hubbard® strains. The results showed that the factors that most influenced the performance of broilers were temperature, ventilation rate, and genetic strain.

ABSTRACT The objective of the present study was to characterize the scientific production regarding the factors that influence broiler chicken production, and that were published from 2000 to 2015 in journals indexed in the database of Google Scholar, Scielo, and ScienceDirect. The research was done in the Thermal Comfort Laboratory at FEAGRI- UNICAMP, and the concept of the systematic review was applied. The research criterion was initially defined (the keywords) aiming to identify and evaluate the variables that describe the experimental characteristics and the animals. The primary keywords identified were: broiler chicken from commercial strains, broiler production, rearing conditions, thermal environment, air quality, acoustic environment, light intensity, management, and heat stress. Those were the key words searched in the database of the online libraries. The selected articles were registered into an electronic spreadsheet with the title, the name of the authors, year of publication, language, the journal where it was published, the keyword, the period when the research was done, source/ database, and the abstract. A total of 167 articles were selected, and only 34 were added to the review. The use of the systematic review of the literature allowed identifying the main variables that positively influence the broiler performance, such as the temperature near the thermal comfort, the use of roof lining, besides the use of adiabatic cooling and cast bricks in the laterals. The presence of positive ventilation, as well as the use of yellow curtains and constant lighting, has also influenced a better performance to broilers.

ABSTRACT The most common lesions observed in commercial broiler farms are hock burns and pododermatitis, defined as necrotic lesions on the plantar surface of the footpads and in the hock of growing broilers, causing pain and compromising broiler welfare. The present study aimed at identifying the risks of hock burns and pododermatitis in broilers reared under commercial conditions on new or reused litter. Twenty-four 40-d-old broilers reared in two houses in a commercial broiler farm. The plantar surface of the footpads and the hocks of broiler were recorded using infrared thermal images. The incidence of hock burns in broilers reared on new litter was 0.72 times lower than those on reused litter. Broilers reared on new litter presented lower risk (0.75, RR<1) of presenting pododermatitis when compared to those reared on reused litter. When simulating the risk using a larger sample, the simulated risk of broilers presenting footpad and hock lesions when reared on new litter was 38% higher those reared on reused litter.

ABSTRACT Housing environment is essential to achieve good broiler performance and to prevent diseases, including footpad dermatitis (FPD). The objective of this study was to determine the incidence of footpad dermatitis in broilers chickens according to housing type. The study was carried out with broilers reared for 5, 12, 19, 29 and 40 days. Four houses were used in this observational study. House 1 (A1) had positive pressure and reused litter; house 2 (A2) had positive pressure and new litter (sawdust); house 3 (A3) had positive pressure and new litter (rice husks); and house 4 (A4) had negative pressure and reused litter. During the entire experiment, air environmental and litter surface temperatures, and litter compaction were recorded. Pododermatitis was assessed by visual scoring of the footpads. Footpads were scored as function of the severity of the lesion. The comparison of means by the test of Bonferroni at 95% confidence interval showed higher incidence of footpad dermatitis in A3, probably due to the particle size of litter substrate. The lowest footpad dermatitis incidence was found in A1, with reused sawdust litter.

Morphological asymmetry has been described as a potential broiler welfare indicator, for interpreting the birds' ability to cope with the challenges that may affect its growth. The objective of this study was to evaluate the use of morphological asymmetry data to estimate broiler walking ability and welfare.dBroilers werefed diets supplemented or not with vitamin D. Toes were measured when birds were 42 and 49 days old using digital caliper.the left and right sides of the following four bilateral traits (tarsometatarsus length, outer toe length, mid toe length, and back toe length) were measured twice on intact alive birds by two different researcherh. Data from right and left sides were compared in the two treatments using the Student t-test, and Pearson's correlation was used to analyze the total asymmetry found as a result of the total sum of the differences in the measurements. Asymmetry data were comparedwith the total numberof leg lesions. Mid toe and tarsometatarsus asymmetry resultswere considered as actual fluctuating asymmetry, and presented normal distribution (Test of Kolmogorov-Smirnov, p >0.05). However, back toe and outer toe measurements were not normally distributed, as determined by the test of Kolmogorov-Smirnov (p <0.05), indicating anti-asymmetry; when comparing right with left limb,results were significantly different fron zero (t-Student, p <0.05) indicating directional fluctuating asymmetry.The welfare of broilers withwalking difficulty due to the presence of severe asymmetry in limbs is poor.

This study was conducted to determine the effect of the air temperature variation on the mean surface temperature (MST) of 7- to 35-day-old broiler chickens using infrared thermometry to estimate MST, and to study surface temperature variation of the wings, head, legs, back and comb as affected by air temperature and broiler age. One hundred Cobb® broilers were used in the experiment. Starting on day 7, 10 birds were weekly selected at random, housed in an environmental chamber and reared under three distinct temperatures (18, 25 and 32 ºC) to record their thermal profile using an infrared thermal camera. The recorded images were processed to estimate MST by selecting the whole area of the bird within the picture and comparing it with the values obtained using selected equations in literature, and to record the surface temperatures of the body parts. The MST estimated by infrared images were not statistically different (p > 0.05) from the values obtained by the equations. MST values significantly increased (p < 0.05) when the air temperature increased, but were not affected by bird age. However, age influenced the difference between MST and air temperature, which was highest on day 14. The technique of infrared thermal image analysis was useful to estimate the mean surface temperature of broiler chickens.

In the Brazilian meat production scenario broiler production is the most dynamic segment. Despite of the knowledge generated in the poultry production chain, there are still important gaps on Brazilian rearing conditions as housing is different from other countries. This research study aimed at analyzing the variation in bird skin surface as function of heat distribution inside broiler houses. A broiler house was virtually divided into nine sectors and measurements were made during the first four weeks of the grow-out in a commercial broiler farm in the region of Rio Claro, São Paulo, Brazil. Rearing ambient temperature and relative humidity, as well as light intensity and air velocity, were recorded in the geometric center of each virtual sector to evaluate the homogeneity of these parameters. Broiler surface temperatures were recorded using infrared thermography. Differences both in surface temperature (Ts) and dry bulb temperature (DBT) were significant (p<0.05) as a function of week of rearing. Ts was different between the first and fourth weeks (p<0.05) in both flocks. Results showed important variations in rearing environment parameters (temperature and relative humidity) and in skin surface temperature as a function of week and house sector. Air velocity data were outside the limits in the first and third weeks in several sectors. Average light intensity values presented low variation relative to week and house sector. The obtained values were outside the recommended ranges, indicating that broilers suffered thermal distress. This study points out the need to record rearing environment data in order to provide better environmental control during broiler grow-out.

This paper describes an exploratory study carried out to determine critical control points and possible risks in hatcheries and broiler farms. The study was based in the identification of the potential hazards existing in broiler production, from the hatchery to the broiler farm, identifying critical control points and defining critical limits. The following rooms were analyzed in the hatchery: egg cold storage, pre-heating, incubator, and hatcher rooms. Two broiler houses were studied in two different farms. The following data were collected in the hatchery and broiler houses: temperature (ºC) and relative humidity (%), air velocity (m s-1), ammonia levels, and light intensity (lx). In the broiler house study, a questionnaire using information of the Broiler Production Good Practices (BPGP) manual was applied, and workers were interviewed. Risk analysis matrices were build to determine Critical Control Points (CCP). After data collection, Statistical Process Control (SPC) was applied through the analysis of the Process Capacity Index, using the software program Minitab15®. Environmental temperature and relative humidity were the critical points identified in the hatchery and in both farms. The classes determined as critical control points in the broiler houses were poultry litter, feeding, drinking water, workers' hygiene and health, management and biosecurity, norms and legislation, facilities, and activity planning. It was concluded that CCP analysis, associated with SPC control tools and guidelines of good production practices, may contribute to improve quality control in poultry production.

Hatching results are directly related to environmental and biological surroundings. This research study aimed at evaluating the influence of incubation environmental conditions on hatchability and one-day-old chickling quality of five production flocks using multivariable analysis tool. The experiment was carried out in a commercial hatchery located in the state of São Paulo, Brazil. Environmental variables such as dry bulb temperature, relative humidity, carbon dioxide concentration, and number of colony forming units of fungi were recorded inside a broiler multi-stage setter, a hatcher after eggs transference, and a chick-processing room. The homogeneity of parameter distribution among quadrants inside the setter, the hatcher, and the chick room was tested using the non-parametric test of Kruskal-Wallis, and the fit analysis was applied. The multivariate analysis was applied using the Main Component Technique in order to identify possible correlations between environmental and production parameters. Three different groups were identified: the first group is represented by temperature, which was positively correlated both with good hatchability and good chick quality; the second group indicates that poor chick quality was positively correlated with air velocity and relative humidity increase. The third group, represented by carbon dioxide concentration and fungi colonies forming units, presented strong positive association with embryo mortality increase.

Health status, feed conversion ratio, and mortality are long known broiler chicken production indicators. However, further parameters are required by today's demanding meat markets, as these indicators are not sufficiently accurate to determine flock overall welfare. Morphological asymmetry has been pointed as an alternative welfare indicator as it reflects the ability of the bird to cope with the challenges that rearing conditions may impose. This study aimed at evaluating the possibility of using morphological asymmetry as a welfare indicator. Broilers from 28 to 42 days of age were used in the trial. Birds were randomly selected in a commercial poultry farm and transported to the laboratory. They walked over the force measurement platform in order to determined their feet force as a percentage of body weight. The following body parts of the live birds were measured by two different operators using a digital caliper: tarsometatarsus length, outertoe length, midtoe length, and backtoe length. In the corresponding carcasses, the following traits were measured: wattle width, eye length, and first secondary feather length. Data were submitted to statistical analyses and no correlation was found between specific feet trait measurements and walking ability. Considering the time budget involved in measuring morphological asymmetry, this procedure did not appear to be a practically feasible welfare indicator.

Poultry meat quality has been widely studied, and has become a growing demand of the international market. Parameters that affect meat quality are complex, and occur throughout the production chain. The constant concern with meat quality by the exporting sectors is a response to consumers' demands, and is achieved by increasing efficiency, and investments in personnel training on quality. Understanding where critical points are in the poultry meat production chain, and investing in solving critical problems may lead to better control and management, and consequent reduction of losses. Production and management practices, from farm to processing plant, play an important role in meat quality, and the use of technologies to reduce risk factors throughout the production chain will allow the production of better quality poultry meat not only for exports, but also for the domestic market. This review describes the main factors that influence poultry meat quality in the production chain.

Intensive broiler production in tropical climates requires adequate air circulation to control heat stress. Excess of air speed may lead to dust production and reduction of air quality and, consequently, production parameters. Brazilian regulations prohibit the presence of pathogens that may deteriorate air quality, and the presence of fungi in the air inside the poultry houses is limited to 750CFU/m³. The aim of this study was to evaluate the presence of fungi in two distinct types of broiler houses. The research compared two types of air ventilation: conventional (G1) and positive tunnel ventilation (G2). The fungi were collected using a dust sampling pump, with the air flow calibrated to 1.5 L/min. The filter impregnated with dust was submitted to growth for two days using five Petri dishes. Microbiology analysis showed that there were 1,239 CFU and 2,011 CFU in G1 and G2, respectively. The different genera of fungi found and their percentages were: Penicillium 29.16%, Aspergillus 37.5% and Fusarium 29.16% in G1 and Penicillium 33.34%, Aspergillus 26.64%, Fusarium 23.34% and Neurospora 3.34% in G2.

O setor econômico de produção de matrizes pesadas emprega um grande número de pessoas que permanecem cerca de 44 horas semanais dentro tanto das granjas de recria e produção, como nas salas adjacentes à câmara incubatória. O trabalho levantou os dados de níveis de ruídos em um sistema de produção de matrizes pesadas e de ovos férteis, nos galpões de recria do tipo Dark House, e produção de ovos nas salas de vacinação de pintinhos e de acondicionamento de ovos férteis, em dois dias consecutivos, por um período de 8 horas, durante as horas em que os trabalhadores se encontravam dentro dos locais. Os registros de nível de ruídos foram efetuados utilizando-se um equipamento nível sonoro marca Lutron SL 4001. Foram coletados os dados médios de nível normal e de intensidade alta intermitente. Os resultados obtidos mostram que, no galpão de produção e na sala de vacinação de pintinhos, é recomendado o uso de protetores auriculares para que se atenda à legislação vigente brasileira sobre salubridade, com relação a níveis de ruídos.

The economical sector of broiler breeder production employs a large number of workers who stay around 44 hours per week within the buildings for both growing and production, as well as the areas surrounding the incubator chamber. This research evaluated the sound level in the broiler breeder production system , in the Dark House and in the egg production housing, in the chickling vaccination room and inside the room where the fertile eggs are conditioned for both transportation or to go inside the incubator chamber. The trial took place during two consecutive days, during 8 hours while the workers where in side the buildings. The level of noise was registered using the sound level equipment Lutron SL 4001. The results showed that inside the egg production housing, as well as the room where the vaccination of chickling takes place, there are levels of critical values where ear protection is needed in order to attend the current Brazilian legislation.