ABSTRACT Objective: To investigate the association between DH and Health (HRQoL) or Oral Health-Related Quality of Life (OHRQoL). Material and Methods: PubMed, Web of Science, Scopus, EMBASE, Cochrane, Scielo, LILACS/BBO, Biblioteca Digital de Teses e Dissertações (BDTD), Open Grey, and Google Scholar databases were screened in September 2019 (updated in October 2022). Observational studies were selected to compare HRQoL/OHRQoL(outcome) according to DH(exposure) or evaluate the association among these variables. Standardized Joanna Briggs Institute critical appraisal tool for analytical cross-sectional studies was used to analyze the risk of bias. A random-effects meta-analysis was conducted to synthesize evidence for the association between DH and OHRQoL. Results: 10 papers met inclusion criteria and were evaluated. In most studies, presenting or having a greater intensity of DH was associated with a negative impact on one's quality of life. However, most of these studies showed a moderate to high risk of methodological bias. The consistent finding from studies with a low risk of bias suggests a significant association between DH and OHRQoL. Meta-analysis was feasible for three studies with substantial heterogeneity. The pooled Odds Ratio was 2.14 (95%CI 1.15-3.99; I2= 57,44%). Conclusion: Many studies presented a high risk of bias; therefore, the actual effect of DH on one's quality of life remains uncertain.

Aim To evaluate the prevalence of untreated caries and its association with biological, individual, and environmental variables in independently-living elderly people. Methods This cross-sectional study included 72 elderly (≥60 years) patients of a university dental clinic in Belo Horizonte, Brazil. Sociodemographic data, systemic diseases, medications, and free sugar intake were collected. Visible plaque, Decayed, Missing, and Filled Teeth (DMFT), and Decayed and Filled Root (DFR) indexes were assessed through clinical examination. Unstimulated saliva was collected to determine salivary flow, pH, and buffering capacity. Descriptive analysis and multilevel logistic regression analysis were performed following a dental caries theoretical model ( p <0.05, 95% CI). Results The mean DMFT and DFR were 24.44 (SD=4.59) and 3.21 (SD=2.93), respectively. The prevalence of untreated caries was 61.11%. In the adjusted multilevel regression model involving 1639 teeth, untreated dental caries was significantly associated with the presence of biofilm (OR = 1.84; 95% CI: 1.24–2.74), salivary buffering capacity (OR = 0.87; 95% CI: 0.77–0.99) and per capita income (OR = 0.06; 95% CI: 0.004–0.74). Conclusion The experience of dental caries was widespread among independently-living elderly patients, and its variability was best explained by the presence of biofilm, reduced salivary buffering capacity, and low per capita income. A comprehensive assessment is needed of the biological, individual, and environmental factors related to the presence of dental caries in independently-living elderly people.

Abstract The topical glucocorticoid budesonide has been prescribed before and after sinus lift surgery as adjuvant drug treatment for maxillary sinus membrane inflammation. However, there is no study on the effects of budesonide on the regenerative process of bone grafting biomaterials. We investigated the effect of the association of budesonide with some biomaterials on the growth and differentiation capacity of pre-osteoblastic cells (MC3T3-E1 subclone 4). Xenogeneic (Bio-Oss and Bio-Gen) and synthetic hydroxyapatites (Osteogen, Bonesynth, and HAP-91) were tested in conditioned medium (1% w/v). The conditioned medium was then supplemented with budesonide (0.5% v/v). Cell viability was assessed using the MTT assay (48, 96, and 144 h), and mineralized nodules were quantified after 14 days of culture using the Alizarin Red Staining. Alkaline phosphatase activity was assessed through the release of thymolphthalein at day seven. All biomaterials showed little or no cytotoxicity. The Bio-Gen allowed significantly less growth than the control group regardless of the experimental time. Regarding differentiation potential of MC3T3-E1, the HAP-91-conditioned medium showed remarkable osteoinductive properties. In osteodifferentiation, the addition of budesonide favored the formation of mineral nodules when cells were cultured in medium conditioned with synthetic materials, whereas it weakened the mineralization potential of cells cultured in xenogeneic medium. Regardless of whether budesonide was added or not, Osteogen and Bio-Oss showed higher alkaline phosphatase activity than the other groups. Budesonide may improve bone formation when associated with synthetic biomaterials. Conversely, the presence of this glucocorticoid weakens the mineralization potential of pre-osteoblastic cells cultured with xenogeneic hydroxyapatites.

Abstract Objective: To evaluate the efficacy of desensitizing agents for the obliteration of dentinal tubules subjected or not to a simulated oral environment. Material and Methods: Dentinal discs (n=8) treated with Riva-Star (RS) or PRG-Barrier-Coat (PRG) were submitted (cycled) or not submitted (control) to erosive-abrasive-thermal cycles and evaluated using scanning electron microscopy/energy dispersive spectroscopic analysis. The variables analyzed were tubule obliteration and dentin surface chemical composition. Data were analyzed by non-parametric tests (p<0.05). Results: The cycled and control groups did not differ significantly for the responses in each material. The PRG control and cycled groups had fewer visible tubules and a higher proportion of totally obliterated tubules than the RS groups. The percentages of silver coverage were higher in the RS-control than in the RS-cycled. There was a significant inverse correlation between the presence of silver and non-obliterated tubules (R=-0.791; p<0.001). The percentages of carbon, aluminum, strontium, and potassium were significantly higher in the PRG-control and PRG-cycled compared to the RS control. The percentages of calcium, phosphorus, and silver were significantly higher in the RS compared to the PRG groups. PRG-control showed a higher percentage of boron than RS-control. Conclusion: PRG promoted greater tubule obliteration than SR. Simulated stress did not affect the obliterating effect of each agent. Greater silver coverage corresponded to a lower proportion of non-obliterated tubules in RS. Carbon, aluminum, strontium, boron, and potassium predominated in the dentin surface treated with PRG, while calcium, phosphorus, and silver prevailed in RS groups.

Abstract: This in vitro study aimed to assess the effects of different pretreatments used to adapt glass-fiber posts cemented to root canals with different resin cements, regarding porosity percentage and bond strength. Twelve bovine incisor roots were prepared with Largo drills. After post space preparation, the specimens were randomized into two types of pretreatment groups (n = 3): water-wet bonding and ethanol-wet bonding. After the post were cemented, the roots were stored in 100% humidity at room temperature for 7 days. The samples were scanned by microcomputed tomography (micro-CT). Images were reconstructed by NRecon software, and CTAn software was used to analyze the porosity percentage (%) at the luting interface. Evaluation of the push-out bond strength was performed by serially cutting the roots, and submitting the slices to testing. Additionally, the resin cement post-gel shrinkage values (%) were measured using the strain-gauge method (n = 10). Data were analyzed by two-way ANOVA, Tukey's test and Student's t test (a = 0.05). The roots prepared with ethanol-wet bonding using RelyX™ U200 had significantly lower porosity in the coronal and apical thirds (p < 0.05). The group prepared with ethanol-wet bonding using RelyX™ ARC presented better bond strength results in the coronal and apical thirds (p < 0.05). RelyX™ ARC (0.97%) produced a higher post-gel shrinkage value than RelyX™ U200 (0.77%). Canals pretreated with ethanol-wet bonding presented better outcomes in regard to porosity percentage and push-out bond strength.

The goal of this study is to test photoelastic resins for manufacturing models with teeth and/or implants under chewing load. Four commercial brands have been chosen: Araldite (Ciba Chemicals), Flexible GIV-Rigid GIV (Polipox) and PL2 (Measurements Group). Nine discs were manufactured, four of them from each of the photoelastic resin brands and five from different proportions of mixture between Flexible GIV and Rigid GIV. All the models were subjected to the diametral compression test, and observed in a circular polariscope. The first order fringe has always been adopted as a benchmark to calculate the photoelastic constant. To the load of interest (150 Newtons), Flexible GIV resin showed areas that followed the elastic regime. Residual stresses for the resin PL2 and persistence of bubbles within the model were observed. Rigid GIV Resin generated the first fringe order only at 280 Newtons load. Araldite resin behaved within the elastic regime and there were no areas with excessive concentration of fringes. The models generated from the manual mixing generated non-homogeneous photoelastic images. The Araldite resin showed to be the most suitable material for manufacturing birefringent models with teeth and/or implants under chewing load.

Resumo Objetivo Avaliar e comparar a rugosidade superficial e a atividade dos osteoblastos em contato com uma nova superfície bioativa e nanoestruturada de titânio grau 4 revestida com vidro bioativo contendo fosfato de cálcio, sintetizada pelo método sol-gel. Material e método Sessenta e três discos de titânio, medindo 4 mm de diâmetro por 2 mm de altura, foram preparados e divididos em três grupos: microtexturizado (Ticp - controle); revestido com vidro bioativo e seco a vácuo a 37 °C por 10 dias (BGTi37), e revestido com vidro bioativo e aquecido a 600 °C por cinco horas (BGTi600). Três espécimes de cada grupo foram utilizados para avaliação da topografia superficial e 18 espécimes, para cultura celular. Resultado O revestimento de vidro bioativo diminuiu a rugosidade média quando comparado ao titânio microtexturizado. A proporção de células viáveis, a produção de fosfatase alcalina e o grau de mineralização da matriz óssea em contato com os espécimes de titânio do grupo BGTi600 foram significativamente menores em relação aos grupos controle e do titânio microtexturizado. Conclusão Apesar de sua marcante menor rugosidade, a superfície BGTi37 apresentou comportamento biológico semelhante a uma superfície de titânio microtexturizada e moderadamente rugosa. A outra superfície experimental (BGTi600), a de menor rugosidade entre todas as testadas, apresentou os piores resultados de ativação dos osteoblastos.

Abstract Objective To evaluate and compare the surface roughness and the activity of the osteoblasts in contact with a new bioactive and nanostructured surface of grade 4 titanium coated with bioactive glass containing calcium phosphate synthesized by the sol-gel method. Material and method Sixty-three titanium disks, measuring 4 × 2 mm, were prepared and divided into three groups: rough surface, obtained by sandblasted, large-grit, acid-etched (SLA) treatment (Ticp); SLA surface coated with bioglass and dried in a vacuum at 37 °C for 10 days (BGTi37) and SLA surface coated with bioglass and dried in air at 600 °C for 5 hours (BGTi600). Three specimens of each group were used for evaluation of surface topography and 18 for cell cultures. Result The bioactive glass coating decreased the average roughness when compared to rough titanium surface. The proportion of viable cells, the production of alkaline phosphatase and the degree of mineralization of the bone matrix in contact with the titanium specimens of the BGTi600 group was significantly lower in relation to the control and rough titanium surface groups. Conclusion Despite its marked lower roughness, BGTi37 surface presented a similar biological behavior to a titanium rough surface obtained by SLA treatment. The other experimental surface (BGTi600), the one with the least roughness among all tested, presented the worst results of osteoblast activation.

ABSTRACT The lipid accumulation product (LAP) index is an emerging cardiovascular risk marker. We aimed to assess the accuracy of this index as a marker of cardiovascular risk in HIV-infected patients. A cross-sectional study of 133 HIV-infected patients on antiretroviral drugs and 20 non-infected controls was conducted at the outpatient clinic of a referral center of infectious and parasitic diseases. Evaluations included LAP index, homeostasis model assessment (HOMA) index, anthropometric measurements, blood pressure, glucose tolerance test, and cholesterol and triglyceride levels. Body mass index (BMI) was similar in both groups; however, waist circumference was greater in the HIV-infected patients. Triglyceride levels were significantly higher (p < 0.001) and HDL cholesterol levels were lower in HIV-infected patients (p < 0.001). Plasma glucose (p = 0.01) and insulin (p = 0.005) levels two hours after a glucose load, HOMA-IR index (p < 0.001) and LAP index (p < 0.001) were higher in the HIV-infected patients. A positive and significant correlation was found between HOMA-IR index and LAP (r = 0.615; p < 0.01), BMI (r = 0.334; p < 0.01) and waist circumference (r = 0.452; p < 0.01) in the HIV-infected patients. In male HIV-infected patients and controls, ROC curve analyses revealed that the best cut-off value of LAP to define the presence of insulin resistance was 64.8 (sensitivity 86%, specificity 77% and area under the curve 0.824). These results confirm that insulin resistance is more common in HIV-patients on antiretroviral drugs than in HIV-negative controls. A positive and significant correlation was found between the LAP index and the HOMA index, with LAP ≥ 64.8 constituting an additional risk factor for cardiovascular disease in male HIV patients.

Resumo Introdução Restaurações estéticas indiretas são preferencialmente cimentadas utilizando-se cimentos resinosos convencionais e sistema adesivo de condicionamento total ou cimentos resinosos autoadesivos. Estes últimos são tecnicamente menos sensíveis e aderem aos tecidos dentários sem tratamento prévio ou aplicação de adesivo, com um único passo para sua aplicação aos tecidos dentários. Objetivo Comparar qualitativamente as interfaces adesivas de dois cimentos resinosos autoadesivos e um cimento resinoso convencional, sob microscopia eletrônica de varredura. Material e método 42 coroas de incisivos bovinos foram seccionadas e as faces vestibulares planificadas expondo esmalte (E) ou dentina (D). Os subgrupos foram definidos de acordo com o tipo e tempo de condicionamento: E1-sem tratamento, E2-37% de ácido fosfórico por 15 segundos, E3-37% de ácido fosfórico por 30 segundos; D1-sem tratamento, D2-37% de ácido fosfórico durante 5 segundos; D3-11,5% de ácido poliacrílico durante 15 segundos. Um bloco de resina foi unido a cada substrato usando os cimentos resinosos autoadesivos RelyX U100 e RelyX U200 (3M ESPE) (n=3). Como referência de camada híbrida, foram cimentados seis blocos de resina com RelyX ARC e o sistema adesivo Scotchbond Multi-Purpose(esmalte-EA, dentina-DA). Após armazenamento (7 dias, umidade, 37±1°C), as amostras foram preparadas para análise microscópica. Resultado Nos espécimes ARC, houve formação de camada híbrida em EA e DA. U100 E1 mostrou lacunas na interface adesiva, enquanto E2 e E3 apresentaram boa interação para ambos os cimentos autoadesivos. Houve interação superficial com U100 e U200 em D1, enquanto em D2 e D3, foram observadas tags de resina apenas para U100. Conclusão Concluiu-se que o condicionamento do substrato pode aumentar a interação entre cimentos resinosos autoadesivos e os tecidos dentários, embora este não seja o caso do RelyX U200 e da dentina.

Abstract Introduction Convencional resin cements can be used in combination with a total-etch system in a conventional mode or as self-adhesive resin cements. The latter are less technique sensitive and able to bond to dental tissues without previous treatment or adhesive layer and requires only a single step to be applied to dental structures. Objective To compare qualitatively the adhesive interfaces of two self-adhesive resin cements and one conventional resin cement after different tooth surface treatments under scanning electron microscopy. Material and method 42 crowns of bovine incisors were sectioned and flattened exposing enamel (E) or dentine (D) substrate. Subgroups were defined according to conditioning type and time: E1—no treatment, E2—37% phosphoric acid for 15 seconds, E3—37% phosphoric acid for 30 seconds; D1—no treatment, D2—37% phosphoric acid for 5 seconds; D3—11.5% polyacrylic acid for 15 seconds. A resin block was bonded to each substrate using the self-adhesive resin cements RelyX U100 (3M ESPE) and RelyX U200 (3M ESPE). As a reference hybrid layer, six resin blocks were luted with RelyX ARC and Scotchbond Multi-Purpose adhesive system (3M ESPE) (enamel—EA; dentine—DA). After aging for 7 days in a moist environment at 37±1°C, samples were prepared for microscopy analysis. Result and Discussion In the ARC specimens, there was hybrid layer formation in both EA and DA. U100 E1 showed gaps at the adhesive interface, while E2 and E3 showed interaction for both self-adhesive cements. There was superficial interaction with bothU100 and U200 in D1, while in D2 and D3, resin tags were only observed in the case of U100. Conclusion It was concluded that substrate conditioning may enhance the interaction between self-adhesive resin cements and dental tissues, although this is not the case for RelyX U200 and dentine.

Resumo Avaliou-se o efeito da espessura, cor e translucidez de uma cerâmica vítrea a base de dissilicato de lítio para CAD / CAM sobre a transmissão da luz de unidades de diodos emissores de luz (LED) e de quartzo-tungstênio-halogênio (QTH). Cerâmica IPS e.max CAD nas cores A1, A2, A3, A3.5 de translucidez alta (HT) e baixa (LT) foram cortadas (1, 2, 3, 4, 5 mm). Os espectros de emissão das fontes de luz foram determinados. A intensidade da luz incidente e transmitida através de cada espécime de cerâmica foi medida para determinar a percentagem de transmissão de luz (TP). Um modelo de regressão linear foi utilizado para a análise estatística. Houve interação significativa entre a fonte de luz e translucidez cerâmica (p = 0.008) e forte correlação negativa (r = -0.845, p <0.001) entre a espessura da cerâmica e TP. O aumento da espessura em uma unidade levou a uma redução média de 3.17 em TP. Não houve diferença significativa em TP (p = 0.124) entre as cores A1 (ß1 = 0) e A2 (ß1 = -0.45), mas ocorreu redução significativa para as cores A3 (ß1 = -0.83) e A3.5 (ß1 = -2.18). A interação QTH/HT proporcionou maior TP (ß1 = 0) do que LED/HT (ß1 = -2.92), QTH/LT (ß1 = -3.75) e LED/LT (ß1 = -5.58). A transmissão de luz foi mais eficaz utilizando QTH e cerâmica de alta translucidez, diminuiu à medida que a espessura de cerâmica aumentou, e foi maior para as cores A1 e A2. A partir do modelo de regressão (R2 = 0.85), obteve-se uma equação para estimar o valor de TP utilizando os valores de ß1 encontrado. Foi observada TP máxima de 25% para QTH e 20% para LED, sugerindo que a atenuação promovida pela cerâmica pode comprometer a ativação de um cimento resinoso fotoativado e de ativação dupla.

The effect of thickness, shade and translucency of CAD/CAM lithium disilicate glass-ceramic on light transmission of light-emitting diode (LED) and quartz-tungsten-halogen units (QTH) were evaluated. Ceramic IPS e.max CAD shades A1, A2, A3, A3.5, high (HT) and low (LT) translucency were cut (1, 2, 3, 4 and 5 mm). Light sources emission spectra were determined. Light intensity incident and transmitted through each ceramic sample was measured to determine light transmission percentage (TP). Statistical analysis used a linear regression model. There was significant interaction between light source and ceramic translucency (p=0.008) and strong negative correlation (R=-0.845, p<0.001) between ceramic thickness and TP. Increasing one unit in thickness led to 3.17 reduction in TP. There was no significant difference in TP (p=0.124) between shades A1 (ß1=0) and A2 (ß1=-0.45) but significant reduction occurred for A3 (ß1=-0.83) and A3.5 (ß1=-2.18). The interaction QTH/HT provided higher TP (ß1=0) than LED/HT (ß1=-2.92), QTH/LT (ß1=-3.75) and LED/LT (ß1=-5.58). Light transmission was more effective using halogen source and high-translucency ceramics, decreased as the ceramic thickness increased and was higher for the lighter shades, A1 and A2. From the regression model (R2=0.85), an equation was obtained to estimate TP value using each variable ß1 found. A maximum TP of 25% for QTH and 20% for LED was found, suggesting that ceramic light attenuation could compromise light cured and dual cure resin cements polymerization.

Resumo Este relato descreve o fluxo de trabalho digital desde tomografia de feixes cônicos até a instalação de uma coroa unitária pré cirúrgica definitiva em zircônia em uma mulher de 19 anos que necessitava de reabilitação com implante do incisivo lateral superior direito. A paciente apresentava agenesia deste dente e tinha finalizado o tratamento ortodôntico. Foi realizada a tomografia e os modelos diagnósticos foram digitalizados. O planejamento virtual do implante foi definido pelo planejamento protético virtual e em seguida um guia cirúrgico foi produzido pelo método da esteriolitografia. Foi verificada a boa adaptação deste guia cirúrgico sobre o modelo de trabalho. O implante e o pilar foram instalados neste modelo de trabalho usando o guia cirúrgico e confeccionada coroa pré cirúrgica definitiva em zircônia pela técnica de CAD / CAM. A cirurgia guiada de instalação do implante foi realizada sem deslocamento de retalho. O pilar selecionado foi instalado e coroa pré cirúrgica definitiva em zircônia foi cimentada com cimento resinoso. O fluxo de trabalho digital apresentado mostrou grande precisão para instalação guiada do implante em uma área estética, permitindo a instalação de uma coroa pré cirúrgica definitiva em zircônia em uma única sessão clínica. A paciente foi reavaliada e apresentou excelentes resultados do tratamento após um ano em função.

This paper describes the digital workflow from cone beam computer tomography (CBCT) to the installation of a definitive presurgical zirconium individual crown in a 19-year-old woman requiring implant replacement of a maxillary right lateral incisor. The patient had agenesis of this tooth and had completed the orthodontic treatment. CBCT was conducted and diagnostic casts were digitized. Virtual planning was completed by defining a prosthetically driven implant and a stereolithographic surgical template was produced. Good adaptation of a stereolithographic surgical template was verified in the working cast. Implant and abutment were installed in this cast using a stereolithographic surgical template, and a CAD/CAM definitive zirconium crown was produced. Flapless computer-guided implant surgery was performed. The abutment was connected, and a definitive zirconium crown was cemented using resin cement. The digital workflow presented herein shows high accuracy for a virtually planned implant with flapless guided placement, allowing the successful delivery of a definitive presurgical zirconium single crown in an esthetic area in a single visit. The patient was revaluated after 1 year of function with an excellent outcome of the treatment.

Introdução: pacientes com aparelhos ortodônticos fixos sofrem limitações no controle efetivo de biofilme por métodos mecânicos, trazendo a necessidade de um coadjuvante no controle na inflamação e melhora na saúde bucal.Objetivo:esse estudo cruzado prospectivo randomizado teve como objetivo analisar o efeito do verniz de clorexidina (CHX) a 40% no crescimento gengival de pacientes com aparelhos ortodônticos fixos.Métodos:indivíduos adolescentes com aparelhos ortodônticos fixos e aumento de volume gengival foram recrutados para a pesquisa (n = 30). Cada participante atuou como seu próprio controle, tendo, na maxila, um lado controle e um tratamento. No lado controle, aplicou-se verniz placebo e no lado experimental, o verniz EC40(r) Biodentic CHX, ambos na face vestibular das coroas dos pré-molares e primeiro molar superiores. Os vernizes e lados foram escolhidos de forma aleatória e a identificação deles e a que grupo pertenciam foi mantida por um terceiro observador, não sendo revelada aos pesquisadores nem aos participantes até o final do estudo. Fotografias digitais foram tiradas por um fotógrafo treinado, antes da aplicação do verniz no tempo inicial (T0), bem como 14 dias (T14) e 56 dias (T56) após a aplicação. O volume gengival foi calculado indiretamente, por meio das áreas vestibulares (mm2) das coroas dos segundos pré-molares superiores, com o softwareRapidSketch(r), em todos os tempos de estudo. Os dados foram analisados usando ANOVA e teste de Turkey-Krammer.Resultados:na amostra final de 30 indivíduos, observou-se que, em T0, os grupos controle e tratamento foram semelhantes. Já em T14 e T56, foi observada uma progressiva redução na área da coroa clínica no grupo controle, e um aumento na área média do grupo experimental (p< 0,05).Conclusão:o uso do verniz de CHX a 40% diminui o excessivo crescimento gengival em pacientes sob tratamento ortodôntico. Estudos futuros são necessários para se determinar o tempo de ação e a frequência de aplicação.

Introduction: Fixed orthodontic appliances patients suffer limitations on the effective control of biofilm by mechanical methods, bringing the need of a coadjutant in the control of inflammation and oral health improvement.Objective: The aim of this prospective split-mouth blind study was to analyze the effect of a 40% chlorhexidine (CHX) varnish on gingival growth of patients with orthodontic fixed appliances. Methods: Healthy teenage patients with fixed orthodontic appliances and increased gingival volume were recruited (n = 30). Each individual was his own control, having in the maxilla one control side and one treatment side. An application of varnishes occurred on the vestibular area of the upper premolars and first molar crowns, on the control side (placebo varnish) and on the experimental side (EC40(r) Biodentic CHX varnish). The varnishes and sides were randomly chosen and its identification and group was kept by a third party observer and it was not revealed to the researchers and participants until the end of study. In order to establish a baseline registration, digital photographs were taken by a trained photographer before varnish application at baseline (T0), as well as 14 days (T14) and 56 days (T56) after the application. The gingival volume was calculated indirectly using the vestibular areas (mm2) of the upper second premolars' clinical crowns by RapidSketch(r) software, at all study times. The data were analyzed using ANOVA and the Turkey-Krammer test.Results:It was observed, in the final sample of 30 individuals, that at T0, the control and treatment groups were similar. At T14 and T56, a progressive reduction of the clinical crown area was seen in the control group, and an increase in the average area was detected in the experimental group (p < 0,05).Conclusions: The use of 40% CHX varnish decreases the gingival overgrowth in patients undergoing orthodontic treatment. Further studies are necessary to set the action time and frequency of application.

OBJETIVO: Avaliar o índice de sucesso clínico dos implantes pilares de próteses totais implantossuportadas. As próteses implantossuportadas vêm sendo utilizadas como uma alternativa viável ao planejamento de reabilitação oral. O protocolo de dois estágios cirúrgicos, ao passar dos anos, vem sendo cada vez mais substituídos pelos procedimentos de carga imediata, principalmente na região anterior inferior, nos casos de reabilitação de pacientes totalmente desdentados. Tal procedimento torna-se viável devido ao alto índice de sucesso da técnica com resultados bastante satisfatórios. MÉTODOS: Por meio de uma revisão de literatura focada em trabalhos publicados com acompanhamento clínico entre 8 e 15 anos. RESULTADOS: Os implantes instalados em mandíbula apresentaram índices de sucesso maiores que os instalados em maxila. Os casos com acompanhamento mais longos, com 15 anos, apresentaram índices de sucesso maiores do que quando comparados aos acompanhamentos de 8 e 10 anos. CONCLUSÃO: O índice de sucesso dos implantes pilares de prótese total é bastante alto.

OBJECTIVE: The aim of this study was to assess the clinical success rate of implant-supported complete dental prostheses, which are being used as a feasible alternative in planning of oral rehabilitation. Over the years, the two-stage surgical protocol has increasingly been replaced by immediate loading procedures, especially in the mandibular anterior region in cases of rehabilitation of completely edentulous patients. This procedure has become feasible due to the high success rate of the technique with very satisfactory results. METHODS: By means of a literature review focused on published articles with clinical follow-up between 8 and 15 years. RESULTS: Implants placed in the mandible had higher success rates than those inserted in the maxilla. Cases with longer follow-up periods, 15 years, showed higher success rates in comparison with follow-up periods of 8 and 10 years. CONCLUSION: Success rates of implant-supported complete dental prostheses are very high.

OBJECTIVE: The occlusal patterns are key requirements for the clinical success of oral rehabilitation supported by implants. This study compared the stresses generated by the disocclusion in the canine guide occlusion (CGO) and bilateral balanced occlusion (BBO) on the implants and metallic infrastructure of a complete Brånemark protocol-type denture modified with the inclusion of one posterior short implant on each side. MATERIAL AND METHODS: A three-dimensional model simulated a mandible with seven titanium implants as pillars, five of them installed between the mental foramen and the two posterior implants, located at the midpoint of the occlusal surface of the first molar. A load of 15 N with an angle of 45° was applied to a tooth or distributed across three teeth to simulate the CGO or BBO, respectively. The commercial program ABAQUS® was used for the model development, before and after the processing of the data. The results were based on a linear static analysis and were used to compare the magnitude of the equivalent stress for each of the simulations. RESULTS: The results showed that the disocclusion in CGO generated higher stresses concentrated on the working side in the region of the short implant. In BBO, the stresses were less intense and more evenly distributed on the prosthesis. The maximum stress found in the simulation of the disocclusion in CGO was two times higher than that found in the simulation of the BBO. The point of maximum stress was located in the neck of the short implant on the working side. CONCLUSIONS: Under the conditions of this study, it was concluded that the BBO pattern was more suitable than CGO for the lower complete denture supported by implants without free distal ends.

Este trabalho teve como objetivo relatar o tratamento de complicações bucais numa paciente hospitalizada com diagnóstico de paralisia supranuclear progressiva (PSP), causa mais comum de parkinsonismo degenerativo. A paciente fazia uso de vários medicamentos, tinha 70 anos de idade, sem acompanhamento odontológico durante a hospitalização, com edentulismo total na arcada superior e usuária de prótese parcial na região inferior, mas em função do quadro clínico sistêmico não fazia uso da mesma. No exame bucal, constatou-se uma lesão na mucosa e lábio superior em decorrência de trauma dos dentes inferiores. Planejou-se inicialmente o tratamento da lesão com laserterapia e exodontias dos dentes que provocaram a lesão traumática. Após a cicatrização da lesão, os dentes inferiores remanescentes foram extraídos. Os resultados obtidos da terapêutica aplicada foram eficazes na melhora clínica da paciente. Conclui-se, assim, que é marcante a necessidade de um cirurgião-dentista como membro permanente da equipe multidisciplinar para o tratamento dessa e de outras patologias, a fim de permitir melhor qualidade de vida aos pacientes.

This study aimed to report the treatment of oral complications in hospitalized patients diagnosed with progressive supranuclear palsy (PSP), the most common cause of degenerative parkinsonism. The patient was taking several medications, was 70 years old, without dental monitoring during hospitalization, with partial edentulism (without natural teeth in upper arch) and used a lower partial denture, but due to clinical history she was not using it. On examination, there was an oral mucosal damage and upper lip due to trauma of the lower teeth. It was planned to initially treat the lesion with laser therapy and extractions of teeth that caused the traumatic injury. After healing of the injury, the remaining lower teeth were extracted. The results of the treatment applied were effective in improving the clinical condition of the patient. This case report showed the need for a dentist as permanent member of the multidisciplinary team to treat this type and other conditions to allow better quality of life for patients.