ABSTRACT The meta-analysis data were obtained from a survey of published articles over 15 years. The data were selected to classify the factors that impact broiler production and separated by influence aspects of animal production (thermal environment and other factors). The relevant data for each study were systematized, grouped and later tabulated and inserted into a database prepared in a spreadsheet. The variables used to analyze the thermal environment were temperature (comfort, high and low) and performance data (weight gain, feed intake, and feed conversion). The variables used for other features were ventilation (TER = tunnel + evaporative cooling, PP = positive pressure, NV = natural ventilation) and performance (feed conversion, live weight, mortality, and weight gain). The factors that may influence the production of broilers were tested by covariance analysis, Pearson correlation coefficient and divergence analysis, about the Cobb®, Ross® and Hubbard® strains. The results showed that the factors that most influenced the performance of broilers were temperature, ventilation rate, and genetic strain.

ABSTRACT The objective of the present study was to characterize the scientific production regarding the factors that influence broiler chicken production, and that were published from 2000 to 2015 in journals indexed in the database of Google Scholar, Scielo, and ScienceDirect. The research was done in the Thermal Comfort Laboratory at FEAGRI- UNICAMP, and the concept of the systematic review was applied. The research criterion was initially defined (the keywords) aiming to identify and evaluate the variables that describe the experimental characteristics and the animals. The primary keywords identified were: broiler chicken from commercial strains, broiler production, rearing conditions, thermal environment, air quality, acoustic environment, light intensity, management, and heat stress. Those were the key words searched in the database of the online libraries. The selected articles were registered into an electronic spreadsheet with the title, the name of the authors, year of publication, language, the journal where it was published, the keyword, the period when the research was done, source/ database, and the abstract. A total of 167 articles were selected, and only 34 were added to the review. The use of the systematic review of the literature allowed identifying the main variables that positively influence the broiler performance, such as the temperature near the thermal comfort, the use of roof lining, besides the use of adiabatic cooling and cast bricks in the laterals. The presence of positive ventilation, as well as the use of yellow curtains and constant lighting, has also influenced a better performance to broilers.

ABSTRACT Rearing environmental conditions are important for turkey production, because this bird is particularly sensitive to heat stress. This study aimed at measuring the wattle temperature response of turkeys of three different ages (61, 96, and 131 days old) exposed to different combinations of dry bulb temperature, relative humidity, and wind speed ranges, as an indication of their physiological responses. The experiment was conducted with 42 male birds housed in a controlled environment chamber and exposed to different combinations of two air speed (WS) ranges (WS1 = 0.3-0.6 ms-1, considered low, and WS2 = 1.2-1.6 ms-1, considered high), dry bulb temperature (DBT) between 22 and 34 °C, and relative humidity (RH) between 40 to 90 %. The statistical analysis showed that WS, DBT, and RH significantly influenced wattle temperature of 61-d-old turkeys, while only WS and DBT influenced this response when turkeys were 96 days old. Furthermore, DBT was highly correlated with both low and high WS. In 131-day-old turkeys, WT response was virtually the same at both wind speed ranges when high DBT was applied. Turkey wattle temperature was influenced by wind speed, and was dependent on both environmental dry bulb temperature and relative humidity, as well as bird age.

Brazilian poultry production is prospering, and negative-pressure broiler houses are increasingly used to improve environmental control. One important issue is the color of the side curtains used in such houses due to the influence of colors on broiler behavior. This study aimed at evaluating the influence of different curtain color on the welfare of 7-day-old broilers, considering luminosity and other environmental parameters. Chicks were housed in three different negative-pressure broiler houses either with black (T1), blue (T2), or yellow (T3) side curtains. House environment (luminosity, dry-bulb temperature, air relative humidity, air velocity, and gas emissions) and the behavior of chicks on day 7 after housing were evaluated in three consecutive flocks in the morning and in the afternoon. Data were submitted to multivariate analysis, Kruskal-Wallis' test, and Pearson's correlation test. Luminosity and ITU were influenced by curtain color, and some of the evaluated behaviors were associated with luminosity or other environmental parameter.

This study aimed at evaluating the live performance of turkeys during the initial stage of production (1-26 days of age) and to map the environmental variables inside turkey houses, such as temperature, relative humidity, CO2 concentration, at two distinct minimum ventilation systems. House 1 (H1) was equipped with a negative-pressure ventilation system and House 2 (H2) was equipped with a positive-pressure ventilation system. This study was performed in commercial poultry houses, located in Francisco Beltrão, Paraná, Brazil, in June, 2008. A number of 14,000 turkeys toms at the same age, provided by the same local hatchery and were housed at a stocking density of 23 birds m-2. Three 13 m² boxes with 300 turkeys each were placed inside the poultry houses. All treatments were assigned for the birds inside each of the three boxes. The poultry barns were virtually divided in eight equally distributed in areas where the environmental variables were recorded. The performance parameters measured were weight gain, feed conversion and mortality rate, recorded weekly. Analysis of variance and F-tests were performed to compare results within different environmental conditions, using MINITAB 14 statistical software. The ventilation systems did not significantly influence CO2 concentrations (p = 0.489), whereas temperature (p = 0.016) and relative humidity (p = 0.0001) and feed conversion (p = 0.001) were significantly affected by ventilation system. Temperature and relative humidity in H2 (positive pressure ventilation system) was found to be less aversive than those in H1 (negative pressure system). Also, bids in H2 presented lower feed conversions than those in H1.

Morphological asymmetry has been described as a potential broiler welfare indicator, for interpreting the birds' ability to cope with the challenges that may affect its growth. The objective of this study was to evaluate the use of morphological asymmetry data to estimate broiler walking ability and welfare.dBroilers werefed diets supplemented or not with vitamin D. Toes were measured when birds were 42 and 49 days old using digital caliper.the left and right sides of the following four bilateral traits (tarsometatarsus length, outer toe length, mid toe length, and back toe length) were measured twice on intact alive birds by two different researcherh. Data from right and left sides were compared in the two treatments using the Student t-test, and Pearson's correlation was used to analyze the total asymmetry found as a result of the total sum of the differences in the measurements. Asymmetry data were comparedwith the total numberof leg lesions. Mid toe and tarsometatarsus asymmetry resultswere considered as actual fluctuating asymmetry, and presented normal distribution (Test of Kolmogorov-Smirnov, p >0.05). However, back toe and outer toe measurements were not normally distributed, as determined by the test of Kolmogorov-Smirnov (p <0.05), indicating anti-asymmetry; when comparing right with left limb,results were significantly different fron zero (t-Student, p <0.05) indicating directional fluctuating asymmetry.The welfare of broilers withwalking difficulty due to the presence of severe asymmetry in limbs is poor.

Broiler litter reutilization consists in using the same bedding material to cover the house floor for several broiler flocks. This requires the litter to be treated in order to reduce the amount of microorganisms, according to international recommendations. The aim of this study was to evaluate two methods of broiler litter fermentation based on composting concepts and their effect on litter and the air quality during fermentation in small-scale broiler houses. The experiment was carried out in the Environmental Laboratory I of the School of Agricultural Engineering of the State University of Campinas, utilizing six small-scale houses. Litter from the same grow-out (one, two or three) was distributed in two experimental houses, where it was either piled or spread. Before beginning the treatment, six litter samples were collected from each house and analyzed for total nitrogen content, humidity, pH and microbial counts. Litter humidity, gas emission (NH3 and CO2), environmental temperature, air relative humidity, and air velocity were determined during and after composting. Bacterial population, especially of Salmonella sp, was higher when the litter was piled compared with spread litter. However, fungi population showed a different pattern, decreasing after composting. Nevertheless, both treatments were not able to significantly reduce bacterial counts, specifically Salmonella sp, when the population before and after fermentation were compared

In tropical poultry-producing countries, poultry houses usually have little environmental control. This study investigated the effect of dietary vitamin D on the incidence of leg abnormalities of a fast-growing broiler strain reared under harsh conditions. In this study, 300 one-day-old male broilers were distributed in two treatments with three replicates of 50 birds each. One group was fed a placebo and the other group was fed 25-hydroxycholecalciferol (25-OH-D3) in a soluble form. The environmental variables were weekly recorded during until birds were 49 days old. Birds were weekly gait scored, and their walking speed and vertical force while walking were assessed. Post-mortem examination was performed and skeletal lesions were assessed. Control birds presented more leg problems than those that ingested 25-OH-D3. These results suggest that dietary vitamin D is effective in decreasing the severity of lameness by reducing tibial dyschondroplasia and other leg abnormalities.

Gas production in broiler houses and their emissions are closely related to the microclimate established inside the house according to air temperature, humidity, and velocity. Therefore, the internal house environment is influenced by building typology and ventilation system. The objective of the present study was to evaluate ammonia emission rates in broiler houses equipped with different ventilation systems (negative or positive pressure) and litter conditions (new or built-up). The environment of six commercial broiler houses was evaluated internal and external NH3 concentrations. Ventilation rates were recorded to estimate ammonia emission rates. The efficiency of circulation and exhaust fans was assessed, and higher ventilation rates were determined in negative-pressure houses due to the higher flow of the fans. Houses with new litter increased ammonia emission rates along the rearing period, indicating the relationship between gas emissions, bird age and ventilation rates, and presented a typical curve of NH3 emission increase. Negative-pressure houses with built-up litter presented higher emission rates during the first rearing week due to the high NH3 concentration during the brooding period, when the ventilation rates required to maintain chick thermal comfort are low. Although the results of the present study indicate an advantage of the positive-pressure systems as to gas emissions, further research is needed reduce gas emissions in broiler houses with negative-pressure systems.

This experiment was carried out in a 104 m² poultry house located between the geographical coordinates 25°45'00" south latitude and 53°03'25" west longitude and an average altitude of 550 m, from September to November, 2008. The chickens were placed in 12 pens measuring 2 m² each at a stocking density of 12 chickens m-2. This study aimed at evaluating the effect of two different initial weights (chick weight on first day of experiment) and two types of litter material on broiler production parameters, litter humidity, as well as on breast and footpad lesions. A total of 240 female Cobb® chickens, derived from the same flock of breeders, was distributed in a completely randomized experimental design with a 2 (initial weight) by 2 (litter material) factorial arrangement with three replicates per treatment. Initial weights were classified as light (34.40 - 35.22 g) or heavy (39.29 - 41.30 g), whereas wood shavings and sawdust were used as litter material. Data were analyzed by ANOVA and means were compared by Tukey's test at 95% confidence level. Initial weight significantly influenced bird performance, as chickens with heavy initial weight presented higher feed intake and body weight. Type of litter did not have any effect on breast injuries and litter humidity. However, the wood shavings litter significantly influenced footpad lesions.

Climate may affect broiler production, especially where there are heat waves, which may cause high mortality rates due to the heat stress. Heat wave prediction and characterization may allow early mitigation actions to be taken. Data Mining is one of the tools used for such a characterization, particularly when a large number of variables is involved. The objective of this study was to classify heat waves that promote broiler chicken mortality in poultry houses equipped with minimal environmental control. A single day of heat, a heat-shock day, is capable of producing high broiler mortality. In poultry houses equipped with fans and evaporative cooling, the characterization of heat waves affecting broiler mortality between 29 days of age and market age presented 89.34% Model Accuracy and 0.73 Class Precision for high mortality. There was no influence on high mortality (HM) of birds between 29 and 31 days of age. Maximum temperature humidity index (THI) above 30.6 ºC was the main characteristic of days when there was a heat wave, causing high mortality in broilers older than 31 days. The high mortality of broilers between 31 and 40 days of age occurred when maximum THI was above 30.6 ºC and maximum temperature of the day was above 34.4 ºC. There were two main causes of high mortality of broilers older than 40 days: 1) maximum THI above 30.6 ºC and minimum THI equal or lower than 15.5 ºC; 2) maximum THI above 30.6 ºC, minimum THI lower than 15.5 ºC, and the time of maximum temperature later than 15:00h. The heat wave influence on broiler mortality lasted an average of 2.7 days.

This study compared three types of feeders for broilers: Fênix, Tube and Automatic feeders. Bird's feeding behavior and preference were considered in this the evaluation. Preference was assessed by examining birds' behavioral activities, such as eating, standing and lying around the equipments, and meal duration as function of the environmental variables. Data on the behavioral activities and meal size were collected in a broiler commercial farm using a portable video camera, and the direct footages were analyzed. The time spent in each activity, feeding bout duration and time spent near the trough were statistically analyzed using the test of means and medians. Pearson's correlation test was used to evaluate the relationship between ambient environmental data and the time of feeding. A prospective scenario was established and data were pair wised compared to it. There were interactions between environmental characteristics and feeding and lying down activities during the experiment. Eating behavior was more frequent in the area around the Tube feeder. The duration of feeding time was higher when the birds used the Tube feeder (214 ± 28s), followed by the use of the Fênix feeder (123 ± 17s) and the Automatic feeder (77 ± 29s). Birds preferred eating from the Tube feeder probably due to the absence of the partition grid above the feeder plate.

Health status, feed conversion ratio, and mortality are long known broiler chicken production indicators. However, further parameters are required by today's demanding meat markets, as these indicators are not sufficiently accurate to determine flock overall welfare. Morphological asymmetry has been pointed as an alternative welfare indicator as it reflects the ability of the bird to cope with the challenges that rearing conditions may impose. This study aimed at evaluating the possibility of using morphological asymmetry as a welfare indicator. Broilers from 28 to 42 days of age were used in the trial. Birds were randomly selected in a commercial poultry farm and transported to the laboratory. They walked over the force measurement platform in order to determined their feet force as a percentage of body weight. The following body parts of the live birds were measured by two different operators using a digital caliper: tarsometatarsus length, outertoe length, midtoe length, and backtoe length. In the corresponding carcasses, the following traits were measured: wattle width, eye length, and first secondary feather length. Data were submitted to statistical analyses and no correlation was found between specific feet trait measurements and walking ability. Considering the time budget involved in measuring morphological asymmetry, this procedure did not appear to be a practically feasible welfare indicator.

Poultry meat quality has been widely studied, and has become a growing demand of the international market. Parameters that affect meat quality are complex, and occur throughout the production chain. The constant concern with meat quality by the exporting sectors is a response to consumers' demands, and is achieved by increasing efficiency, and investments in personnel training on quality. Understanding where critical points are in the poultry meat production chain, and investing in solving critical problems may lead to better control and management, and consequent reduction of losses. Production and management practices, from farm to processing plant, play an important role in meat quality, and the use of technologies to reduce risk factors throughout the production chain will allow the production of better quality poultry meat not only for exports, but also for the domestic market. This review describes the main factors that influence poultry meat quality in the production chain.

Well being of animals had been historically a public concern, since the beginning of human kind history. As world's population grows there is a need for food including meat. In the last decades there has been a great improvement in poultry production based on the careful control of several aspects, among which nutrition and management (environment, health and rearing systems). Nowadays, the search for good welfare conditions is a global tendency in animal production; however issues surrounding farm animal welfare or well-being, such as definitions, measurements, interpretation, and perception, continue to be controversial. It is known that the result of a broiler not adequately housed is a direct loss in production which leads towards a thought that health, welfare and productivity are intimately connected. In the other hand hints are found in the observation of behavioral responses as well as vocalization, which may provide more precise assessment to welfare. This has been possible due to the use of information technology applied to the field of ethology as well as the multidisciplinary view of the problem. This text provides a review on broiler's welfare issues since its definition to several way of trying to assess it adequately.