Abstract Jambolan (Syzygium cumini (L.) Skeels) is an under-explored fruit rich in polyphenols, which are associated with health benefits, such as increasing resistance to oxidative stress, inflammatory processes and cardiovascular, and platelet functions. These polyphenols can be obtained by extraction, but an efficient standard method remains a challenge. In this context, this work evaluated the impact of different pretreatments on jambolans to obtain bioactive compounds by aqueous extraction. An Air Circulation Oven (ACO) and Lyophilization (LYO) were used as pretreatments. In addition, the influence of mass, temperature, cycle, and time parameters were studied in the extraction methods used: Percolated Solid-Liquid (PSL), Conventional Solid-Liquid (CSL), and solid-liquid assisted by ultrasound (USL). The extraction yield was from 7.3% (ACO) to 46.3% (LYO), both using the PSL method. In addition, eleven phenolic compounds and six anthocyanins were detected by High Performance Liquid Chromatography-Diode Array Detector (HPLC-DAD), in expressive amounts of catechin and cyaniding in the LYO sample and, these extracts showed higher concentrations of bioactive compounds. The CSL method was more efficient on ACO samples and PSL on LYO samples. LYO extracts showed higher concentrations of bioactive compounds. Therefore, the use of a drying pretreatment results in extracts with a high antioxidant potential for application in the food, cosmetic, and pharmaceutical markets.

Resumo O jambolão é uma fruta pouco explorada e rica em polifenóis, que estão associados a benefícios para a saúde, como aumento da resistência ao estresse oxidativo e aos processos inflamatórios, bem como mostram-se benéficos para as funções cardiovasculares e plaquetárias. Para obtê-los, pode-se fazer por extração, mas um método padrão eficiente permanece um desafio. Nesse contexto, este trabalho avalia o impacto de diferentes pré-tratamentos no jambolão para a obtenção de compostos bioativos por extração aquosa. Estufa com circulação de ar (ACO) e liofilização (LYO) foram usados como pré-tratamentos. Além disso, estudou-se a influência dos parâmetros de massa, temperatura, ciclo e tempo nos métodos de extração utilizados: sólido-líquido percolado (PSL), sólido-líquido convencional (CSL) e sólido-líquido assistido por ultrassom (USL). O rendimento de extração foi de 7,3% (ACO) a 46,3% (LYO), ambos pelo método sólido-líquido percolado (PSL). Além disso, 11 compostos fenólicos e seis antocianinas foram detectados por HPLC-DAD, em quantidades expressivas de catequina e cianidina, na amostra LYO, e esses extratos apresentaram maiores concentrações de compostos bioativos. O método CSL foi mais eficiente em amostras de ACO e o método PSL, em amostras de LYO. Os extratos LYO apresentaram maiores concentrações de compostos bioativos. Portanto, a utilização de um pré-tratamento de secagem resulta em extratos com alto potencial antioxidante para aplicação nos mercados alimentício, cosmético e farmacêutico.

ABSTRACT N-Acetylcysteine (NAC) is a thiol (-SH) with a strong antioxidant activity. This compound has demonstrated positive effects on chronic kidney disease, cancer, pulmonary insufficiency and other diseases. The aim of this work was to investigate the application of the Solution Enhanced Dispersion by Supercritical Fluids (SEDS) technique in the micronization of NAC using a 23 Central Composite Design (CCD) with 3 central points, as well as to assess the influence of active compound concentration, temperature and pressure on the particle size produced. The average size of the drug before SEDS processing was verified to be 709.82 µm while the best result led to a particle size of 2.86 µm, which means a reduction of about 248 fold. It was also observed that a reduction in particle size led to an increase in the dissolution rate with 100% dissolution.

ABSTRACT Transesterification of non-edible oils using immobilized lipase is a promising process for biodiesel production. Thus, this study aimed to evaluate the enzymatic transesterification of the non-edible Jatropha curcas oil for FAEE production under ultrasound irradiation in a solvent-free system. The effects of enzyme concentration, water concentration, molar ratio of ethanol to oil and ultrasound power on the FAEE conversion have been evaluated. The results show that enzyme concentration and irradiation power have a positive significant effect on FAEE conversion, where an increase in these variables leads to higher conversions. Conversion above 54% of FAEE was achieved with 1.5 hours of reaction time using ultrasound irradiation, reducing reaction time by at least 3 times, when compared with the same experimental conditions without ultrasound irradiation. Results showed that ultrasound can improve reaction conversion mainly by enhancing the mass transfer between the constituents of the reactions.

The inconveniences of the conventional method for biodiesel production by alkaline catalysis suggests research towards alternative methods, with the non-catalytic transesterification using an alcohol at supercritical conditions proposed as a promising technique for biodiesel production. The so-called supercritical method (SCM) has powerful advantages over conventional techniques, such as fast reaction rates, feedstock flexibility, production efficiency and environmentally friendly benefits. However, application of this methodology has some limitations, like operating conditions (elevated temperature and pressure and higher amounts of alcohol), which result in high energy costs and degradation of the products generated. In this review paper the state of the art in relation to the use of the SCM for biodiesel production is reported and discussed, describing the characteristics of the method, the influence of operational parameters on the ester yield, patents available in the field and the perspectives for application of the technique.

Lipases produced by a newly isolated Sporidiobolus pararoseus strain have potential catalytic ability for esterification reactions. After production, the enzymatic extracts (conventional crude and precipitated, 'CC' and 'CP', and industrial crude and precipitated, 'IC' e 'IP') were partially characterized. The enzymes presented, in general, higher specificity for short chain alcohols and fatty acids. The precipitated extract showed a good thermal stability, higher than that for crude enzymatic extracts. The 'CC' and 'CP' enzymes presented high activities after exposure to pH 6.5 and 40 ºC. On the other hand, the 'IC' and 'IP' extracts kept their activities in a wide range of pH memory but presented preference for higher reaction temperatures. Preliminary studies of application of the crude lipase extract in the enzymatic production of geranyl propionate using geraniol and propionic acid as substrates in solvent-free system led to a reaction conversion of 42 ± 1.5%.

Neste experimento foram comparados os métodos de coleta total de fezes (CT) e de indicadores internos (cinza insolúvel em ácido - CIA, fibra bruta - FB e fibra em detergente ácido - FDA) na determinação dos coeficientes de digestibilidade aparente (CDA) da matéria seca (MS), proteína bruta (PB), extrato etéreo (EE), extrativo não nitrogenado (ENN) e energia bruta (EB) de uma ração comercial de gatos-domésticos para jaguatiricas (Leopardus pardalis). Seis animais adultos com peso de 12,45 ± 1,37kg receberam gradativamente a ração experimental na dieta habitual até o início do experimento e foram submetidos a um período de adaptação de 10 dias anteriores ao período de coleta. Os CDA obtidos pela CT, CIA, FB e FDA foram, respectivamente de 73,70; 76,83; 62,01 e 46,03% para matéria seca, 81,9; 84,8; 75,8 e 63,8% para proteína bruta, 85,0; 86,7; 78,5 e 69,1% para extrato etéreo, 78,52; 79,55; 69,11 e 53,04% para extrativo não nitrogenado e de 80,5; 82,2; 71,4 e 58,4% para energia bruta. O método de CIA mostrou-se eficiente na determinação dos coeficientes de digestibilidade aparente e pode contribuir com as investigações sobre a digestibilidade em dietas com felídeos selvagens. A ração utilizada permitiu aos animais um adequado aporte nutricional e apresentou menores custos/animal/dia em comparação aos itens que compunham a dieta habitual.

In this experiment, methods of total fecal collection (TFC) and internal markers (acid-insoluble ash - AIA, crude fiber - CF, and acid-detergent fiber - ADF) were compared for determination of the coefficients of apparent digestibility (CAD) for dry matter (DM), crude protein (CP), ether extract (EE), nitrogen-free extracts (NFE), and gross energy (GE) of commercial feline dry kibble for ocelots (Leopardus pardalis). Six adult animals, weighing 12.45±1.37 kg, gradually received experimental kibble in their usual diet until the beginning of the experiment and were submitted to an adaptation period ten days prior to the collection period. CAD obtained by TFC, AIA, CF, and ADF were, respectively, 73.7, 76.83, 62.01, and 46.03% for dry matter; 81.9, 84.8, 75.8, and 63.8% for crude protein; 85, 86.7, 78.5, and 69.1% for ether extract; 78.52, 79.55, 69.11, and 53.04% for nitrogen-free extracts; and 80.5, 82.2, 71.4, and 58.4% for gross energy. The AIA method showed to be efficient in determining coefficients of apparent digestibility and may contribute to investigations on the digestibility of diets for wild felines. In comparison to the items of ocelot's usual diet, the kibble used in this paper provided an adequate nutritional supply with reduced daily costs per animal.

This work is focused on the determination of liquid-liquid equilibrium data for systems containing methyl and ethyl fatty acid esters, water, glycerol and ethanol at temperatures of 303.15 K and 318.15 K using a near-infrared spectroscopy technique (NIR). The NIR method used in this investigation provided quite satisfactory results when compared to conventional analytical techniques and hence can be used as an advantageous tool to quantify the compounds involved in the liquid-liquid equilibrium systems: i) without previous preparation of the samples; ii) with less waste generation; iii) at low cost; and iv) via a non-destructive technique, as sample analyses are made directly, showing good reproducibility and reliability of the data. The NIR method was effective in the use of different temperatures for calibration and validation of the systems under study. Besides, it is shown that extrapolation with the technique may be possible, making LLE predictions feasible for other conditions not used in the calibration procedure.

In Brazil, the species Maytenus aquifolia and Maytenus ilicifolia are widely used in popular medicine in the form of teas for stomach and ulcer illness treatment. Despite the great interest in Maytenus aquifolia therapeutic properties and the fact that it is an abundant and native plant growing in Brazil, there is a lack of information in the literature concerning the extraction at high pressures. In this context, this work is focused on the mathematical modelling of the packed-bed extraction of Maytenus aquifolia with compressed CO2. Three mathematical models were used to represent the experimental data. The experiments were performed in a laboratory-scale unit, evaluating the effects of temperature (293 to 323 K), pressure (100 to 250 bar), and extraction time on the yield of the extracts. Results show that the extraction temperature and solvent density exerted a pronounced effect on yield. The mathematical model of Sovová was the most suitable to represent the experimental extraction data of M. aquifolia.

The lipase produced by a newly isolate Sporidiobolus pararoseus strain has potential catalysis ability for esterification reactions. In order to improve its synthetic activity, this work aimed at optimizing 'synthetic lipase' production by submerged fermentation of a conventional media based on peptone, yeast extract, NaCl and olive oil using experimental design technique. According to the results obtained in the first experimental design (2(4-1)), yeast extract and NaCl concentrations were tested to further optimization by response surface methodology. The maximum 'synthetic lipase' activity obtained was 26.9 U/mL in the optimized media (5.0, 6.8, 7.0 and 1.0% (wt/v) of peptone, yeast extract, NaCl and olive oil, respectively), representing a 6.36-fold increase compared to the initial medium. The time course of 'synthetic lipase' production in the optimized condition was evaluated in terms of synthetic activity, protease activity, biomass and total carbon and the maximum synthetic activity was observed during the stationary phase of growth.

The aim of this work is to report the performance of different supports for the immobilization of commercial porcine pancreatic lipase. The immobilization tests were carried out in several types of Accurel, activated alumina, kaolin, montmorillonite, ion exchange resins and zeolites. The characterization of the supports showed differences in terms of specific area and morphology. The characteristics of the supports influenced the amount of enzyme adsorbed, yield of immobilization and esterification activity of the resulting immobilized catalyst. The clays KSF and natural and pillared montmorillonites presented potential for use as support for lipase immobilization in terms of yield and esterification activity. Yields of immobilization of 76.32 and 52.01% were achieved for clays KSF and natural montmorillonite, respectively. Esterification activities of 754.03, 595.51, 591.88 and 515.71 U.g-1 were obtained for lipases immobilized in Accurel MP-100, Amberlite XAD-2, mordenite and pillared montmorillonite, respectively.

The main focus of this work was to investigate the residual esterification activity and the product conversion after 10 successive cycles of utilization of a commercial lipase in three systems: esterification of 2-ethyl hexanol and palmitic acid in a solvent-free system; esterification of ascorbic acid and palmitic acid in tert-butanol; and transesterification of glycerol and methyl benzoate in 2-propanol. These systems were chosen based on previous results by our research group in terms of product conversion. Before scale-up, there is a need for evaluating several cycles of utilization of the biocatalyst. The esterification of 2-ethyl hexanol showed that after 10 cycles the enzyme retained 90% of its activity. The system consisting of ascorbic acid, palmitic acid, Novozym 435 and tert-butanol showed that a reduction in enzyme activity was accompanied by a reduction in reaction conversion; the same behavior was not observed for the third system.

As condições termodinâmicas do desenvolvimento de nuvens Cumulunimbus (Cb) e Nimbustratus (Ns) e formação de precipitações na cidade de Pelotas são estudadas utilizando-se dados do NCEP (National Center for Environmental Prediction, Washington) para os níveis padrões e dados meteorológicos convencionais. Analisou-se a freqüência das nuvens Cb e Ns durante três anos, para as quatro estações do ano, e calcularam- se os índices de instabilidade (Showalter, lifted, K and standard totals-totals) e a energia potencial de convecção. Foram identificados cinco tipos de perfis verticais de temperatura e umidade para os dias em que foram verificadas nuvens Cb e Ns, através de dados de radiossondagens de Porto Alegre, e das análises do NCEP. Apresentam-se os resultados da análise da instabilidade atmosférica e são discutidos os problemas da previsão de nuvens Cb e Ns, utilizando os índices de instabilidade.

The thermodynamic conditions of Cumulunimbus (Cb) and Nimbustratus (Ns) cloudiness development and precipitation formation in Pelotas city were studied using NCEP (National Centers for Environmental Prediction, Washington) data for standard levels and conventional meteorological data. The frequency of the Cb and Ns cloudiness during three years and for each seasons was analyzed. Stability indexes (Showalter, lifted, K and standard totals-totals) and the convective available potential energy were calculated. Five types of vertical profiles of temperature and humidity for days with Cb and Ns clouds were identified through radiosonde data over Porto Alegre and NCEP analysis. The results of the atmospheric instability analysis are presented and problems envolving the Cb and Ns cloudiness forecasting, using the stability indexes, are discussed.

This work reports high-pressure cloud point data for the quaternary system glycerol + olive oil + n-butane + AOT surfactant. The static synthetic method, using a variable-volume view cell, was employed for obtaining the experimental data at pressures up to 27 MPa. The effects of glycerol/olive oil concentration and surfactant addition on the pressure transition values were evaluated in the temperature range from 303 K to 343 K. For the system investigated, vapor-liquid (VLE), liquid-liquid (LLE) and vapor-liquid-liquid (VLLE) equilibrium were recorded. It was experimentally observed that, at a given temperature and surfactant content, an increase in the concentration of glycerol/oil ratio led to a pronounced increase in the slope of the liquid-liquid coexistence curve. A comparison with results reported for the same system but using propane as solvent showed that much lower pressure transition values are obtained when using n-butane.

Minimization of Gibbs free energy using activity coefficient models and nonlinear equation solution techniques is commonly applied to phase stability problems. However, when conventional techniques, such as the Newton-Raphson method, are employed, serious convergence problems may arise. Due to the existence of multiple solutions, several problems can be found in modeling liquid-liquid equilibrium of multicomponent systems, which are highly dependent on the initial guess. In this work phase stability analysis of liquid-liquid equilibrium is investigated using the NRTL model. For this purpose, two distinct stochastic numerical algorithms are employed to minimize the tangent plane distance of Gibbs free energy: a subdivision algorithm that can find all roots of nonlinear equations for liquid-liquid stability analysis and the Simulated Annealing method. Results obtained in this work for the two stochastic algorithms are compared with those of the Interval Newton method from the literature. Several different binary and multicomponent systems from the literature were successfully investigated.

This work reports the effects of temperature (20 to 50ºC) and pressure (100 to 250 bar) on the extraction yield, chemical characteristics and antimicrobial activity of extracts of Peumus boldus Molina obtained by compressed carbon dioxide extraction. Results showed that the extraction variables affect the extraction yield and the chemical distribution of the major compounds present in the extracts. The extracts were chemically analyzed with regard to 1,8-cineole, trans-sabinene, pinocarveol, pinocarvone, 4-terpineol, ascaridole, piperitone oxide, limonene dioxide and n-eicosane in a GC/MSD. Antimicrobial tests demonstrated that the high-pressure CO2 extracts had activity against 13 bacteria and that better action was verified with extracts obtained at a lower CO2 extraction density and a higher temperature.