Abstract The demands for dental materials continue to grow, driven by the desire to reach a better performance than currently achieved by the available materials. In the dental restorative ceramic field, the structures evolved from the metal-ceramic systems to highly translucent multilayered zirconia, aiming not only for tailored mechanical properties but also for the aesthetics to mimic natural teeth. Ceramics are widely used in prosthetic dentistry due to their attractive clinical properties, including high strength, biocompatibility, chemical stability, and a good combination of optical properties. Metal-ceramics type has always been the golden standard of dental reconstruction. However, this system lacks aesthetic aspects. For this reason, efforts are made to develop materials that met both the mechanical features necessary for the safe performance of the restoration as well as the aesthetic aspects, aiming for a beautiful smile. In this field, glass and high-strength core ceramics have been highly investigated for applications in dental restoration due to their excellent combination of mechanical properties and translucency. However, since these are recent materials when compared with the metal-ceramic system, many studies are still required to guarantee the quality and longevity of these systems. Therefore, a background on available dental materials properties is a starting point to provoke a discussion on the development of potential alternatives to rehabilitate lost hard and soft tissue structures with ceramic-based tooth and implant-supported reconstructions. This review aims to bring the most recent materials research of the two major categories of ceramic restorations: ceramic-metal system and all-ceramic restorations. The practical aspects are herein presented regarding the evolution and development of materials, technologies applications, strength, color, and aesthetics. A trend was observed to use high-strength core ceramics type due to their ability to be manufactured by CAD/CAM technology. In addition, the impacts of COVID-19 on the market of dental restorative ceramics are presented.

ABSTRACT Lately, nanomaterials have been largely studied as reinforcements for epoxy resin. Although their usage is highly promising, the literature has reported some drawbacks regarding the improvement of mechanical properties in nanocomposites. These difficulties are usually due to dispersion of nanomaterials and its adhesion to the polymeric matrix. One approach to this problem is the functionalization of nanomaterials such as carbon nanotubes (CNTs) and graphene. In this work, we have studied the synthesis and functionalization process of CNTs and graphene oxide (GO) to be used as reinforcements for epoxy resin nanocomposites. CNTs were synthesized at 850 °C in a quartz furnace, from hexane and ferrocene vapor, and functionalized by acids and ethylenediamine treatments. GO was obtained by graphite exfoliation through a modified Hummer's method. The nanomaterials were characterized by Raman spectrum, FT-IR, XRD, and SEM images. Nanocomposites were prepared using these nanomaterials and evaluated by DMA. While both nanomaterials showed an improvement in mechanical properties, suggesting a chemical bond between nanomaterial and the epoxy matrix, it was clear that GO reinforced samples presented a higher storage modulus.

Abstract This paper investigates the application of the luminescence spectroscopy technique in steady–state to study the moisture influence in glass fiber/epoxy prepreg and their laminates. The studies were monitored by intrinsic luminescence comparing the results with gravimetric analysis and near infrared with Fourier transform. Samples are cured and submitted to humidity controlled at 60 and 80 °C until 90 days. It is verified that the decrease in the maximum emission of the samples is directly related to the material moisture content. However, for very short periods, there is an increase in the relative intensity and blue shift of the emission band for all samples treated at 60 °C, which is related to an increase of the rigidity of the polymeric matrix. The results in this paper have a great significance because it brings a wide discussion on the interaction of water in epoxy composites materials.

Nanostructures based on ZnO have been widely studied due to their electronic and piezoelectric properties. Experimental studies have shown that thin films based on ZnO can be used as chemical and optoelectronic sensors. The great goal of this work is to study of the role of the number of graphene-like layers in the physical properties of the ZnO. Therefore, the geometrical and electronic properties of graphene-like structures will be compared with the wurtzite one. In this work, the pn-type semiconducting behavior of the graphene-like structures and its relationship with the number of layers will be also analyzed.

ABSTRACT: The focus of this study is to evaluate the effect of carboxyl and amino functionalization of multiwalled carbon nanotubes on the mechanical property of the epoxy resin filled with modified carbon nanotubes. The carbon nanotubes were treated with sulfuric and nitric acids and also with hexamethylenediamine. The presence of acid and amine chemical groups on the carbon nanotube surface was confirmed by X-ray photoelectron spectroscopy. The composites were produced with epoxy resin and modified carbon nanotubes. Vickers hardness tests were carried out on the composites and neat resin. The results showed an increase of hardness in the composite prepared with functionalized carbon nanotubes. This phenomenon is due to the fact that the chemical interaction between modified carbon nanotube and epoxy resin is much stronger than between pristine carbon nanotube and epoxy resin. This stronger interaction is related to the presence of functionalized carbon nanotubes.

ABSTRACT: Mullite is an excellent structural material due to its high temperature stability, high electrical insulation capabilities and creep resistance. This material has a number of technological applications, such as rocket nozzles used in the aerospace industry. In this work, mullite was obtained by sol-gel process, using silicic sol, aluminum nitrate and ethylene glycol, besides the following volume ratios of silica sol dispersion to ethylene glycol: 1/0; 1/1; 1/2; and 1/3. After drying, the samples were thermal treated at temperatures of 1,000; 1,100; 1,200 and 1,250°C. The samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and specific surface area (Bruner-Emmett-Teller - BET). SEM showed that mullite particles are fine and nearly equiaxed. The sample without ethylene glycol showed 3/2 mullite after heat treatment at 1,250°C. The sample with intermediate ethylene glycol concentration presented two crystallization processes: the first at 1,000°C forming mullite and spinel phases, and the second at 1,250°C forming only 3/2 mullite. However, the sample with the highest ethylene glycol concentration crystallized directly to mullite at 1,000°C with the highest yield. There is a strong dependence on the specific surface area with temperature. The Rietveld refinement showed that the a cell lattice of mullite and the Al/Si molar ratio in the mullite formula depend on the ethylene glycol presence and on the calcination temperature. The lattice parameters b and c are not dependent on the alumina content, but the parameter a increases with the increase in the alumina content. Samples prepared with higher ethylene glycol concentrations reached higher mullite yields at lower temperatures.

The crystallization kinetics of ceramics composed by Bi2O3-ZnO-Nb2O5 (BZN) was studied using non-isothermal method. The BZN samples were prepared by the polymeric precursors method. Phase evolution was evaluated by X ray diffraction and the thermal events were evaluated by differential scanning calorimetry (DSC). The crystallization of BZN occurs from 500 to 700 °C, which corresponds to a secondary event in DSC curves. The principal exothermic event in these curves is related to the decomposition of organic material and was isolated from the crystallization peak by deconvolution into two Gaussian curves. Those related to crystallization processes were evaluated in terms of crystallized fraction. Kinetic parameters were determined from Ligero (E = 242 ± 7) kJ.mol-1 and Kissinger (E = 241 ± 24) kJ.mol-1 methodologies and they are very close. The activation energy Ea = (241 ± 24) kJ.mol-1 and (242 ± 7) kJ.mol-1 (by the Kissinger and Ligero methodology, respectively), frequency factor k0 =10(13).s-1 and exponent of Avrami n = (1.3 ± 0.1) were determined. The n value indicates that the crystallization is diffusion controlled, with decreasing nucleation rate. Scanning electronic microscopy showed the presence of nanoparticulated powder.

Multicomponent ceramics are mainly synthesized by conventional solid-state reaction route and sol-gel routes. In the sol-gel route, colloidal or polymeric gel are envolved. In this work, some principles of the chemistry of theses routes are discused and it is ilustrated a variety of strategies for obtaining a homogeneous multicomponent precursors.