Catalyst performance is a relevant factor in biodiesel production because it can affect the efficiency of the process. This work provides a study of the performance of heterogeneous catalysts for biodiesel production derived from thermal-treated hydrocalumite-type compounds. This work aimed to synthesize and characterize hydrocalumite-type compounds intercalated with chloride and nitrate, evaluate the effect of thermal treatments at different temperatures (500, 600, and 750 °C) on these materials, and assess the performance of these materials as catalysts in the transesterification reactions using soybean oil and methanol. The materials were characterized by X-ray diffraction (XRD), vibrational spectroscopy (Fourier transform infrared with attenuated total reflectance (FTIR-ATR)), thermogravimetric analysis coupled to mass spectrometry (TGA DSC-MS), specific surface area, and X-ray photoelectron spectroscopy (XPS). The results of the transesterification reactions showed that the thermal-treated materials from the hydrocalumite intercalated with chloride presented high catalytic activity, among them, the thermal-treated material at 750 °C presented the highest conversion to methyl esters.

Synthetic conditions were evaluated to intercalate norbixin into layered double hydroxides (LDH). Norbixin was isolated from a hydrosoluble commercial annatto extract. LDH samples comprising M2+/Al3+ (M = Mg, Zn) were synthesized by coprecipitation and characterized by X-ray diffraction, thermal analysis coupled to mass spectrometry, vibrational spectroscopies, and solid-state 13C nuclear magnetic resonance. Radical scavenging activity of LDH hybrids was monitored by electron paramagnetic resonance towards the stable radical DPPH (1,1-diphenyl-2-picrylhydrazyl). LDH hosts presented more than 50 wt.% of norbixin and d-spacing (003) values of about 2.5 or 3.0 nm depending of the cation LDH composition. Vibrational spectra assignment (supported by density functional theory calculations) confirmed the chemical integrity of norbixin after intercalation into LDH. The inorganic layers were found to enhance the thermal stability of norbixin upon intercalation. The free radical scavenging capacity of norbixin was retained when immobilized into LDH. Considering that zinc and magnesium-LDH matrices are biocompatible and that norbixin presents biological activity, the hybrid materials appear as promising systems for biomedical assessment.

Celulose bacteriana (BC) foi utilizada nesse estudo como molde na preparação de compostos do tipo hidrotalcita ou hidróxidos duplos lamelares (LDHs) pelo método da co-precipitação e submetida a três tempos de envelhecimento distintos. Os compósitos isolados contendo LDH suportado na BC (BC-LDH) foram calcinados para remoção da matriz orgânica. Os óxidos metálicos mistos formados após a decomposição térmica sofreram reação de reconstrução na presença de uma solução de Na2CO3 para produzirem novamente materiais do tipo hidrotalcita (RBC-LDH). Para avaliar a influência da BC na formação do LDH, também foram analisadas as frações de LDH que não aderiram às fibras da BC e, também, o LDH sintetizado na ausência da membrana polimérica. Os difratogramas de raios X dos compósitos BC-LDH exibem picos alargados relacionados com a matriz orgânica semi-cristalina, indicando um grande nível de interação entre as fases orgânica e inorgânica. A interação também é evidenciada pelas mudanças nos perfis de decomposição dos compósitos com relação ao polímero prístino. As imagens de microscopia eletrônica de varredura mostraram a formação de partículas arredondadas submicrométricas de LDH após a remoção da membrana (RBC-LDH), diferentemente do hábito de rosetas exibido pelo LDH prístino. O envelhecimento é uma componente chave no processo de crescimento de todas as amostras de LDH produzidas, resultando na formação de partículas inorgânicas maiores à medida que o tempo aumenta. O compósito RBC-LDH envelhecido por três dias apresenta um aumento significativo na área superficial (mais do que três vezes) se comparado ao LDH preparado na ausência de BC.

Bacterial cellulose (BC) was used as a template for preparation of Hydrotalcite-type compounds or layered double hydroxides (LDHs) by co-precipitation method, and submitted to three aging times. Isolated composites containing LDH supported on BC (BC-LDH) were calcined to remove the organic matrix. Mixed metal oxides formed after thermal decomposition underwent reconstruction reaction in Na2CO3 solution producing again hydrotalcite-like materials (RBC-LDH). To evaluate the influence of BC on the LDH formation, it was also analyzed LDH fractions not attached to the BC fibers and LDH synthesized in absence of the polymeric membrane. XRD pattern of BC-LDH composites show broadened peaks related to the organic semi-crystalline matrix, indicating a deep level of interaction between organic and inorganic phases. Interaction is also evidenced by changes in the composites thermal decomposition profiles compared to pristine polymer. SEM images revealed formation of submicrometrical round-shaped LDH particles after removal of membrane (RBC-LDH), differently from the plate-habit exhibited by pristine LDH. Aging plays a key role in growth of all LDHs samples, leading to the formation of larger inorganic particles as time is increased. RBC-LDH aging for three days shows significant improvement in the surface area (more than three times) if contrasted to LDH prepared in BC absence.

Nanocompósitos à base de amido de mandioca, argila sintética hectorita e açúcar invertido (plastificante) foram preparados por processo em meio aquoso (casting) produzindo filmes transparentes e homogêneos. Pequenas quantidades de argila (5-15% em massa) produzem principalmente nanocompósitos esfoliados, enquanto grandes quantidades (30% em massa) promovem a formação de nanocompósitos intercalados. Os espectros FT-Raman mostram que bandas sensíveis à ligação de hidrogênio em grânulos de amido são progressivamente deslocadas para frequências menores quando o teor de argila é aumentado. Os nanocompósitos mostram um comportamento térmico semelhante até 320 ºC, enquanto a decomposição da biomolécula em cerca de 500 ºC é dependente do teor de argila. A liberação de CO2 em aproximadamente 300 ºC (decomposição não oxidativa das cadeias poliméricas) diminui se comparada com o desprendimento desse gás em 500 ºC quando a quantidade de argila é aumentada. Filmes com teor de argila maior que 10% não mostram melhora substancial nas propriedades de alongamento ou resistência.

Polymer-clay nanocomposites (PCN) based on cassava starch, synthetic hectorite clay and inverted sugar cane syrup (plasticizer) were prepared by solvent-assisted (casting) process producing transparent and homogeneous films. Small amounts of clay (5-15 wt.%) resulted mainly in exfoliated nanocomposites while large amounts (30 wt.%) promote the intercalated nanocomposites formation. FT-Raman bands sensitive to hydrogen bonding in starch granules are progressively shifted to lower wavenumbers as the clay content is raised. Nanocomposites show a similar thermal behavior up to 320 ºC while the biomolecule decomposition at about 500 ºC is dependent on the clay content. CO2 release at about 300 ºC (non-oxidative decomposition of polymeric chains) decreases if compared to the gas delivery at ca. 500 ºC, as the clay content is increased. Films with clay content higher than 10 wt.% show no substantial benefit for either elongation or resistance properties.

Herein, the immobilization of some Schiff base-copper(II) complexes in smectite clays is described as a strategy for the heterogenization of homogeneous catalysts. The obtained materials were characterized by spectroscopic techniques, mostly UV/Vis, EPR, XANES and luminescence spectroscopy. SWy-2 and synthetic Laponite clays were used for the immobilization of two different complexes that have previously shown catalytic activity in the dismutation of superoxide radicals, and disproportionation of hydrogen peroxide. The obtained results indicated the occurrence of an intriguing intramolecular redox process involving copper and the imine ligand at the surface of the clays. These studies are supported by computational calculations.

Studies about the inorganic nanoparticles applying for non-viral release of biological and therapeutic species have been intensified nowadays. This work reviews the preparation strategies and application of layered double hydroxides (LDH) as carriers for storing, carrying and control delivery of intercalated species as drugs and DNA for gene therapy. LDH show low toxicity, biocompatibility, high anion exchange capacity, surface sites for functionalization, and a suitable equilibrium between chemical stability and biodegradability. LDH can increase the intercalated species stability and promote its sub-cellular uptake for biomedical purposes. Concerning the healthy field, LDH have been evaluated for clinical diagnosis as a biosensor component.

A modificação química do material lamelar K4Nb6O17 foi investigada sistematicamente através da reação de sua forma protônica (H2K2Nb6O17) em soluções alcalinas contendo os cátions tetrametilamônio (tma+), tetraetilamônio (tea+) ou tetrapropilamônio (tpa+). A quantidade intercalada corresponde a 50% (para tma+), 25% (para tea+) e 15% (para tpa+) da carga negativa do H2K2Nb6O17 (considerando a troca iônica na região interlamelar I). As amostras de hexaniobato apresentam reflexões basais (020) de 23,0, 26,3 e 26,5 Å quando intercaladas, respectivamente, com tma+, tea+ e tpa+. Aquecendo-se as amostras acima de 200-250 ºC, observa-se a liberação de CO2; a reação de eliminação de Hofmann também é observada para as amostras de hexaniobato-tpa+. As imagens de microscopia eletrônica de varredura mostram a presença predominante de partículas em forma de placas; partículas em forma de bastões também são observadas nas amostras contendo íons volumosos. A reação de intercalação é promovida na ordem tma+ > tea+ > tpa+, enquanto a formação de uma dispersão de partículas coloidais é facilitada na ordem inversa.

Chemical modification of the layered K4Nb6O17 material was systematically investigated through the reaction of its proton-exchanged form (H2K2Nb6O17) in alkaline solutions containing tetramethylammonium (tma+), tetraethylammonium (tea+) or tetrapropylammonium (tpa+) cations. The intercalated amount reaches 50% (for tma+), 25% (for tea+) and 15% (for tpa+) of the H2K2Nb6O17 negative charge (concerning the exchange at interlayer I) due to the steric hindrance of larger cations. Hexaniobate samples present (020) basal reflections equal to 23.0, 26.3 and 26.5 Å once intercalated respectively with tma+, tea+ and tpa+. When samples are heated above 200-250 ºC, CO2 evolution is observed; Hofmann elimination reaction is also detected for hexaniobate-tpa+ samples. Scanning electron microscopy images show the predominance of plate-like particles; stick-like particles are also observed for samples containing bulky ions. The intercalation reaction is promoted in the order tma+ > tea+ > tpa+, while the formation of a dispersion of colloidal particles is facilitated in the inverse order.

The niobate with formula K4Nb6O17 has a layered structure formed by stacked negative sheets and exchangeable cations in the interlayer region. In this study we discuss some structural aspects related to the ion exchange in layered hexaniobate based on X-ray diffractometry and vibrational Raman spectroscopy data. Hexaniobate has two distinct interlayer regions and the potassium ions of one interlayer in particular are preferably exchanged by other cations, leading to an interstratified material.

Hidroxo-sais lamelares de composição Cu2(OH)3X (X = NO3-, CH3COO- e ClO4-) foram sintetizados através da coprecipitação (sais básicos de nitrato e acetato) e da troca iônica (sal básico de perclorato). Os sólidos cristalinos foram caracterizados por difratometria de raios X, análise termogravimétrica e espectroscopia vibracional. Bandas fracas em 336 e 345 cm-1 (espectro Raman) dos sais de nitrato e perclorato, respectivamente, foram tentativamente atribuídas ao niCu-O (ânion). Os ions nitrato possuem simetria C2v no composto Cu2(OH)3NO3 e, consequentemente, observa-se o desdobramento dos modos E'. A quebra da degenerescência também é observada nos modos F2 do íon ClO4- livre, ocasionando o desdobramento das bandas em 630 e 1100 cm-1 no espectro do hidroxo-perclorato de cobre(II). A pequena diferença de energia entre os modos niasC-O e nisC-O (delta=143 cm-1) do sal de acetato sugere a presença de ligação de hidrogênio entre o oxigênio não coordenado do grupo carboxilato e um íon hidroxila adjacente. Os íons nitrato, acetato e perclorato estão coordenados ao cobre(II) de modo monodentado.

Copper hydroxy salts with a layer-type structure and general composition Cu2(OH)3X (X = NO3-, CH3COO- and ClO4-) were synthesized by co-precipitation (nitrate and acetate salts) and ion exchange (perchlorate salt) methods. The isolated polycrystalline solids were characterized by X-ray diffractometry, thermogravimetric analysis and vibrational spectroscopy. A weak band at 336 and 345 cm-1 (Raman spectrum) of the nitrate and perchlorate salts, respectively, was tentatively assigned to the nCu-O (anion). In Cu2(OH)3NO3 the nitrate ion has a C2v symmetry and, accordingly, a splitting in the E' modes is observed. The same happens to the hydroxy perchlorate salt with the degeneracy breakdown of the F2 modes (free ClO4-) at 630 and 1100 cm-1 leading to band splitting. For the carboxylate salt, the small difference in the energy of nuasC-O and nusC-O (delta=143 cm-1) suggests that hydrogen bonding with neighbor OH group may be present. Nitrate, carboxylate and perchlorate are monocoordinated to copper(II) in the investigated salts.

Two-dimensional inorganic networks can shown intracrystalline reactivity, i.e., simple ions, large species as Keggin ions, organic species, coordination compounds or organometallics can be incorporated in the interlayer region. The host-guest interaction usually causes changes in their chemical, catalytic, electronic and optical properties. The isolation of materials with interesting properties and making use of soft chemistry routes have given rise the possibility of industrial and technological applications of these compounds. We have been using several synthetic approaches to intercalate porphyrins and phthalocyanines into inorganic materials: smectite clays, layered double hydroxides and layered niobates. The isolated materials have been characterized by elemental and thermal analysis, X-ray diffraction, surface area measurements, scanning electronic microscopy, electronic and resonance Raman spectroscopies and EPR. The degree of layer stacking and the charge density of the matrices as well their acid-base nature were considered in our studies on the interaction between the macrocycles and inorganic hosts.