Abstract A fibrinolytic enzyme from the microalga Dunaliella tertiolecta was produced under mixotrophic conditions using different corn steep liquor (CSL) concentrations ( 0 ≤ CLS ≤ 0.75%), purified using a combination of salting out and ion-exchange chromatography, and then biochemical characterized. Cultivation of this microalga using 0.5% CSL led to the highest maximum cell concentration (1.960±0.010 mg L-1) and cell productivity (0.140g L-1 day-1), besides a high fibrinolytic activity of the extract obtained by the homogenization method (102 ±1 U mL-1). The enzyme extracted from the microalgal biomass was 5-fold purified with a 20% yield and was found to have a specific activity of 670 U mg-1. The enzyme, whose molecular weight determined by fibrin zymography was 10 kDa, was shown to be stable at pH 3.0–9.0 and up to 70°C with optimal pH and temperature values of 8.0 and 50°C, respectively. When compared to other fibrinolytic enzymes, this protease stood out for its high fibrinolytic activity, which was enhanced by Fe2+, inhibited by Zn2+, Cu2+, Mg2+, and Ca2+, and strongly inhibited by phenylmethylsulfonyl fluoride, suggesting that it belongs to the serine metalloprotease family. Moreover, thanks to its thermal stability, the enzyme may be easily preserved and activated under high-temperature conditions.

Abstract Hypertension is a factor that contributes to the risk of chronic diseases. The inhibition of angiotensin-I converting enzyme (ACE) is a useful therapeutic approach to the hypertension treatment. The algae have been an alternative for the production of ACE inhibitory (ACEi) peptides from enzymatic hydrolysis due to their protein-rich biomass. The aim of this study was to systematically review the literature regarding the production, composition and activity of ACEi peptides derived from algae proteins. Systematic database searches identified 648 related articles. Among these, only 14 were selected according to the eligibility criteria to this review. Macroalgae are more studied than microalgae as sources of ACEi peptides. Furthermore, hydrolysates by thermolysin or bromelain exhibited the highest ACEi activity compared to other enzymes. The main features of the peptides with high ACE inhibition are low molecular weight, short amino acids sequence and non-competitive inhibition pattern. In vivo studies using hydrolysates and peptides derived from algae proteins showed antihypertensive activity in spontaneously hypertensive rats (SHR). Thus, it is suggested that ACEi peptides derived from algae can be considered as potential antihypertensive.

Abstract This work aimed to compare the production of collagenolytic proteases produced by M. subtilissimus UCP1262 in submerged fermentation (SF) and solid-state fermentation (SSF) as well as extracting in aqueous two-phase system (ATPS). Collagenolytic protease production was performed in using MS-2 culture medium (SF) and soybean bran as substrate (SSF). Subsequently, the fermented liquid from both fermentations were used for the extraction of enzyme by ATPS, it was verified the influence of different variables from a factorial design 23. In SSF the highest protease and collagenolytic activities were achieved with 362.66 U/mL and 179.81 U/mL, respectively. When compared with SF (26.33 and 18.70 U/mL) higher values were obtained in the activities. The protease partitioning from SF and SSF in ATPS showed a similar profile showing higher affinity for the polymer rich phase. The highest value for the response variable purification factor (3.49) was obtained in the system using SSF. Thus, SSF shows promise as a bioprocess for extracellular production of collagenolytic proteases, using of soybean bran as substrate had used sustainable raw material, aiming application this possible enzyme in the treatment of burns and postoperative scarring.

Abstract This study aims to evaluate the in silico genomic characteristics of Streptococcus infantarius subsp. infantarius, isolated from Coalho cheese from Paraíba, Brazil, with a view to application in lactic fermentations. rRNA sequences from the 16S ribosomal region were used as input to GenBank, in the search for patterns that could reveal a non-pathogenic behavior of S. infantarius subsp. infantarius, comparing mobile genetic elements, antibiotic resistance genes, pan-genome analysis and multi-genome alignment among related species. S. infantarius subsp. infantarius CJ18 was the only complete genome reported by BLAST/NCBI with high similarity and after comparative genetics with complete genomes of Streptococcus agalactiae (SAG153, NJ1606) and Streptococcus thermophilus (ST106, CS18, IDCC2201, APC151) revealed that CJ18 showed a low number of transposases and integrases, infection by phage bacteria of the Streptococcus genus, absence of antibiotic resistance genes and presence of bacteriocin, folate and riboflavin producing genes. The genome alignment revealed that the collinear blocks of S. thermophilus ST106 and S. agalactiae SAG153 have inverted blocks when compared to the CJ18 genome due to gene positioning, insertions and deletions. Therefore, the strains of S. infantarius subsp. infantarius isolated from Coalho cheese from Paraíba showed genomic similarity with CJ18 and the mobility of genes analyzed in silico showed absence of pathogenicity throughout the genome of CJ18, indicating the potential of these strains for the dairy industry.

Abstract Solid state fermentation is a promising technology largely used in biotechnology process and is a suitable strategy for producing low-cost enzymatic products. At the present study, a novel enzyme obtained through solid state fermentation using Aspergillus sydowii was herein purified and characterized. The fermentations used coffee ground residue as substrate and the crude enzyme was submitted through further purification steps of: acetonic precipitation, DEAE-Sephadex and Superdex G-75 column. Both crude and purified enzymes were submitted to biochemical characterization of their thermostability, optimal temperature and pH, effects of inhibitors and metal ions. A purified protease was obtained with yield of 5.9-fold and 53% recovery, with maximal proteolytic activity of 352.0 U/mL. SDS-PAGE revealed a band of protein at 47.0 kDa. The enzyme activity was abolished in the presence of phenyl-methyl sulfonyl fluoride and partially inhibited against Triton X-100 (78.0%). The optimal activity was found in pH 8.0 at 45°C of temperature. Besides, the enzyme showed stability between 35°C and 50°C. It was possible to determine appropriate conditions to the obtainment of thermostable proteases with biotechnological interest associated with a method that concomitantly shows excellent production levels and recovery waste raw material in a very profitable process.

Abstract Fibrinolytic proteases are a promising alternative in the pharmaceutical industry, they are used in the treatment of cardiovascular diseases, especially thrombosis. Microorganisms are the most interesting source of fibrinolytic proteases. The aim of this study was the production of fibrinolytic protease from Streptomyces parvulus DPUA 1573, the recovery of the protease by aqueous two-phase system and partial biochemical characterization of the enzyme. The aqueous two-phase system was performed according to a 24-full factorial design using polyethylene glycol molar mass, polyethylene glycol concentration, citrate concentration and pH as independent variables. It was analyzed the effect of different ions, surfactants, inhibitors, pH and temperature on enzyme activity. The best conditions for purifying the enzyme were 17.5% polyethylene glycol 8,000, 15% Phosphate and pH 8.0, it was obtained a partition coefficient of 7.33, a yield of 57.49% and a purification factor of 2.10-fold. There was an increase in enzyme activity in the presence of Fe2+ and a decrease in the presence of $\beta$-Mercaptoethanol, phenylmethylsulfonyl fluoride and Iodoacetic acid. The optimum pH was 7.0 and the optimum temperature was 40 ºC. The purified protease exhibited a molecular mass of 41 kDa. The fibrinolytic protease from Streptomyces parvulus proved to be a viable option for the development of a possible drug with fibrinolytic action.

Abstract The industrial demand for proteolytic enzymes is stimulating the search for new enzyme sources. Fungal enzymes are preferred over bacterial enzymes, and more effective and easier to extract. The aim of this work was to evaluate the potential of protease production by solid state fermentation (SSF) of Mucor subtilissimus UCP 1262, evaluate different specific activities, purify and partially characterize the enzyme in terms of biochemical as to the optimal pH and temperature. Initially, the enzyme crude extract was screened for 3 different proteolytic activities, collagenolytic (161.4 U/mL), keratinolytic (39.6 U/mL) and fibrinolytic (26.1 U/mL) in addition to conventional proteinase activity. After ammonium sulfate precipitation, the active fractions with fibrinolytic activity were dialyzed in 15 mM Tris-HCl buffer, pH 8, loaded onto DEAE-Sephadex A50 ion-exchange column and gel filtrated through Superdex 75 HR10/300. The enzyme showed a fibrinolytic maximum activity at 40 C and pH 9,0. The purified enzyme showed activity against a chromogenic chymotrypsin substrate, SDS-PAGE showing a molecular mass of approximately 70 kDa and, the specific activity of 25.93 U/mg. These characteristics suggest that the enzyme could be and efficiently produced in a simple and low-cost way using Mucor subtilissimus UCP 1262 in SSF.

Abstract Copaiba oil is a natural product used by Amazonian populations and recognized for its medicinal properties because it has significant antimicrobial activity for several pathogenic microorganisms. The present work aimed to evaluate and characterize the effect of natural oil produced by copaiba – Copaifera multijuga against multiresistant isolates of bubaline mastitis. The nitrocefin test was performed with isolates of Staphylococcus aureus from bubaline mastitis, which were 100% positive for beta-lactamase enzyme detection. Minimum Bactericidal Concentration (MBC) of 25% to 3.12% was obtained for Enterococcus faecalis and Escherichia coli and 50% and 25% for S. aureus, but Klebsiella pneumoniae and Bacillus subtilis were resistant. MBC with 12.5% and 6.25% oil were obtained for most multiresistant bubaline mastitis isolates from the states of Pernambuco, Ceará, Bahia and Alagoas. The results demonstrated the great potential of using copaiba natural oil in the treatment of buffalo mastitis.

Quitina e quitosana foram extraídas a partir da massa micelial de Cunninghamella elegans (IFM 46109) e avaliou-se a aplicação destes polissacarídeos na remoção dos metais pesados cobre, chumbo e ferro preparados em solução aquosa. O crescimento de C. elegans foi acompanhado através da determinação de biomassa, pH, consumo de glicose e de nitrogênio. A extração de quitina e quitosana realizou-se através de tratamento álcali-ácido e a produção dos polissacarídeos foi de 23,8 e 7,8 %, respectivamente. A avaliação do processo de remoção dos metais pesados foi realizada utilizando-se os polissacarídeos em solução a 1% (p/v). Os níveis de biossorção de metais foram dependentes da concentração e do pH das soluções. Os melhores resultados foram obtidos em pH 4,0. A quitosana mostrou maior índice de biossorção para o íon cobre e a quitina para o ferro. Os resultados sugerem que C.elegans pode ser considerada uma fonte atrativa para a produção alternativa de quitina e quitosana, e que demonstra grande potencial de biossorção de metais pesados em ambientes poluídos.

Chitin and chitosan were extracted from mycelial biomass of Cunninghamella elegans and the performance for copper, lead and iron biosorption in aqueous solution was evaluated. The growth curve of C. elegans was accomplished by determination of biomass, pH, glucose and nitrogen consumption. Chitin and chitosan were extracted by alkali-acid treatment and the yields were 23.8 and 7.8%, respectively. For the adsorption analysis, the process of heavy uptake metal sorption was evaluated using polysaccharides solutions (1% w/v). The rate of metallic biosorption was dependent upon the concentration and pH of metal solutions, and the best results were observed with pH 4.0. Chitosan showed the highest affinity for copper and chitin for iron adsorption. The results suggest that C. elegans (IFM 46109) is an attractive source of production of chitin and chitosan, with a great potential of heavy metals bioremediation in polluted environments.