The purpose of this study is to prepare a new ion imprinted polymer for MoVI with high selectivity. Ion-imprinted polymer (IIP) particles were synthesized by thermally copolymerization. For the synthesis of the ion imprinted polymer, the ion pair of (MoVI-thiocyanate) and NR4+ was used. The ion pair was precipitated in an aqueous phase and then dissolved in acetonitrile as a porogen. The imprinted ion was removed using 10% (v/v) methanol in HCl (0.5 mol L-1). The unleached and leached IIP particles were characterized by infrared spectroscopy, thermogravimetric analysis, surface area analysis, scanning electron microscopy and energy dispersive X-ray analysis. The use of the new MoVI-IIP in solid phase extraction revealed a maximum adsorption capacity of 3.77 mg MoVIper gram of MoVI-IIP in optimum conditions of extraction. The selectivity coefficients of the IIP for Mo in comparison with other metal ions were also evaluated. The proposed Mo-IIP was successfully applied for MoVI determination in different types of water samples.

A furan-triazole derivative has been explored as an ionophore for preparation of a highly selective Pr(III) membrane sensor. The proposed sensor exhibits a Nernstian response for Pr(III) activity over a wide concentration range with a detection limit of 5.2×10-8 M. Its response is independent of pH of the solution in the range 3.0-8.8 and offers the advantages of fast response time. To investigate the analytical applicability of the sensor, it was applied successfully as an indicator electrode in potentiometric titration of Pr(III) solution and also in the direct and indirect determination of trace Pr(III) ions in some samples.

Ultra-trace amounts of Cu(II) were separated and preconcentrated by solid phase extraction on octadecyl-bonded silica membrane disks modified with a new Schiff,s base (Bis- (2-Hydroxyacetophenone) -2,2-dimethyl-1,3-propanediimine) (SBTD) followed by elution and inductively coupled plasma atomic emission spectrometric detection. The method was applied as a separation and detection method for copper(II) in environmental and biological samples. Extraction efficiency and the influence of sample matrix, flow rate, pH, and type and minimum amount of stripping acid were investigated. The concentration factor and detection limit of the proposed method are 500 and 12.5 pg mL-1, respectively.