RESUMO: A microencapsulação é utilizada para a proteção de compostos bioativos e controle de sua liberação. A combinação de métodos de encapsulação permite a obtenção de matrizes com melhores propriedades tecnológicas em relação às técnicas utilizadas individualmente. Na gelificação iônica são produzidas micropartículas porosas, e o recobrimento por interação eletrostática com uma proteína permite a obtenção de micropartículas mais protetivas. O objetivo do trabalho foi produzir micropartículas de alginato (AG) através da gelificação iônica e recobri-las com proteínas solúveis de concentrado proteico de soja. Dois fatores foram estudados, o teor de cálcio utilizado na gelificação iônica (0,8,1,6 e 2,4% m/m) e o pH (3,5 e 7,0) para o recobrimento eletrostático com uma camada proteica. Os potenciais zeta (PZ) dos biopolímeros e das micropartículas foram determinados. As micropartículas foram caracterizadas quanto a morfologia, tamanho médio e sua distribuição e quanto ao teor de proteína adsorvida nas situações estudadas. As micropartículas obtidas apresentaram-se (154-334μm) com recheio distribuído de forma multinuclear, com superfície continua e visualmente lisas, porém com variação grande no tamanho médio. A variação do teor de cálcio não foi significativa na adsorção proteica. O pH utilizado na adsorção proteica foi significativo, com adsorções muito maiores em pH 3,5 (6,5 - 6,7% m/m de proteína adsorvida, base seca) comparado ao pH 7,0 (<2,0% m/m de adsorção proteica, base seca), indicando que a interação eletrostática foi determinante no recobrimento proteico. Nesta situação, micropartículas AG e a proteína apresentam PZ com cargas opostas (pH>pKa AG<ponto isoeletrico, PI).

ABSTRACT: Microencapsulation is used for protection and release of bioactive compounds. Combination of encapsulation methods allows the production of matrices with better technological properties compared to the application of one of the methods alone. Use of ionic gelation produces porous microparticles, and coating it with a protein, by electrostatic interaction, may contribute to a better protection of the active compound. The objective of the research was to produce alginate microparticles (AG) through ionic gelation and to coat them with soluble protein from soy protein concentrate. Two factors were studied, calcium concentration during ionic gelation (0.8, 1.6 and 2.4% w/w) and pH (3.5 and 7.0) of the protein solution for electrostatic interaction. Zeta potential (ZP) of biopolymers and microparticles were determined. Microparticles were characterized according to its morphology, average size and size distribution, as well as protein adsorption. Microparticles presented (154-334μm) multinuclear distribution of active compound, continuous and smooth surface, with a great standard deviation considering average size. The calcium concentration did not influence the protein adsorption on microparticles.The pH used in protein adsorption showed significant effect, with higher adsorption occurring at pH 3.5 (6.5 to 6.7% w/w, dry basis,db, of adsorbed protein) compared to pH 7.0 (<2.0% w/w, db, of adsorbed protein) indicating that electrostatic interaction was determinant for the protein coating. At this situation, ionic gelation microparticles and proteins presented ZP with opposite charges (pH>pKa AG<Isoelectric point, IP).

Abstract Films and sheets composed by poly (lactic acid) (PLA)/thermoplastic starch (TPS) and TPS/gelatin blends have already been produced and characterized in the literature. However, materials produced with these three biopolymers have not been clearly investigated. In this work, extruded sheets were produced with PLA, TPS (glycerol as plasticizer) and different amounts of gelatin (0, 1, 3 and 5 wt%) in a pilot scale co-rotating twin-screw extruder coupled with a calender. The extruded sheets were characterized in regards to their water solubility, thickness, density, water vapor permeability (WVP), moisture sorption isotherms, mechanical properties and microstructure. The results showed an increase in solubility and WVP besides a decrease of about 30% in tensile strength, Young's modulus and elongation at break. Extruded sheets microstructure revealed smother surfaces and homogeneous morphology with the addition of gelatin. The experiments demonstrated that extrusion and calendering process is a viable way to produce PLA/TPS/gelatin sheets with interesting properties.

Abstract The aim of the work was to study the mechanical properties of extruded starch/polyvinyl alcohol (PVA)/glycerol biodegradable blends using multivariate analysis. The blends were produced as cylindrical strands by extrusion using PVAs with different hydrolysis degrees and viscosities, at two extrusion temperature profiles (90/170/170/170/170 °C and 90/170/200/200/200 °C) and three conditioning relative humidities of the samples (33, 53, and 75%). The mechanical properties showed a great variability according to PVA type, as well as the extrusion temperature profile and the conditioning relative humidity; the tensile strength ranged from 0.42 to 5.40 MPa, elongation at break ranged from 10 to 404% and Young’s modulus ranged from 0.93 to 13.81 MPa. The multivariate analysis was a useful methodology to study the mechanical properties behavior of starch/PVA/glycerol blends, and it can be used as an exploratory technique to select of the more suitable PVA type and extrusion temperature to produce biodegradable materials.

Abstract Blends of poly(lactic acid) (PLA) and thermoplastic starch (TPS) plasticized with adipate esters (diisodecyl adipate and diethyl adipate) having different molecular weight were used to produce sheets. The calendering-extrusion process at a pilot scale was used, and the mechanical, barrier, and morphological characterization of the obtained materials were performed. The increase in the TPS content affected the mechanical properties of the sheets by increasing the elongation and decreasing the rigidity. TPS conferred a more hydrophilic character to the sheets, as observed from the water vapor permeability results. The sheets plasticized with diisodecyl adipate (DIA), having a higher molecular weight, had better mechanical and barrier properties than diethyl adipate (DEA) plasticized sheets, indicating that DIA was more effective as plasticizer. Micrographs obtained by confocal laser microscopy and scanning electron microscopy showed different morphologies when different proportions of PLA and TPS were used (dispersed or co-continuous structures), which were strongly associated with the mechanical and barrier properties.

Amidos oxidados em elevadas concentrações produzem pastas fluidas, são estáveis à retrogradação e aplicados em indústrias de papel, têxtil e de alimentos. Esta propriedade é atribuída à presença de carboxilas, com cargas negativas e mais volumosas que as hidroxilas. Neste trabalho, amidos de batata, batata doce, mandioca, mandioquinha salsa, milho e milho ceroso foram modificados com KMnO4/ácido lático e NaOCl/ácido lático e caracterizados quanto ao teor de carboxilas, poder redutor, coloração diferencial, propriedade de expansão e propriedades viscoamilográficas, em água e tampões acetato (pH 4,0) e fosfato (pH 7,0). Amidos de milho ceroso e de mandioca modificados com KMnO4/ácido lático apresentaram elevadas expansões (25,8 e 24,1 mL.g-1, respectivamente). As pastas de amido de milho ceroso resistiram a ciclos de congelamento/descongelamento. A coloração diferencial e o teor de carboxilas não permitiram diferenciar as amostras; apenas o amido de batata reagiu com azul de metileno devido aos grupos fosfato. Quanto ao pH e acidez, as amostras apresentaram valores próximos da neutralidade, exceto o amido de milho e milho ceroso modificados com NaOCl. Amidos oxidados com KMnO4/ácido lático apresentaram picos de viscosidade inferiores aos tratados com NaOCl. Os picos de viscosidade em tampão fosfato foram inferiores aos em água e em tampão acetato.

Oxidized starches produce low-viscosity pastes even in high concentrations, are stable to retrogradation and are used in the paper, textile and food industries. This property is attributed to the presence of carboxyl groups, which have negative charges and are bulkier than hydroxyls. In this work, potato, sweet potato, Peruvian carrot, cassava, corn and waxy corn starches were modified with oxidative reagents and characterized with respect to their carboxyl content, reducing power, differential dyeing, expansion power and viscographic properties, in water, acetate buffer (pH 4.0) and phosphate buffer (pH 7.0). The results showed that waxy corn and cassava starches presented high expansions, when modified with KMNO4/lactic acid (25.8 and 24.1 mL.g-1, respectively). The starch pastes of waxy corn showed freeze-thaw stability in all treatments. Differential dyeing and carboxyl content did not vary between the native and modified samples; only potato starch reacted with methylene blue, due to the presence of phosphate groups. With respect to pH and acidity, almost all samples presented values next to neutrality, except corn and waxy corn starch modified with NaOCl/lactic acid. The starches oxidized with KMnO4/lactic acid presented lower viscosity peaks than those oxidized with NaOCl. The viscosity peaks of starches analyzed in phosphate buffer were lower than in water and acetate buffer.

A utilização de amidos modificados em alimentos tem sido uma alternativa para melhorar as características que os amidos nativos não podem conferir. Os objetivos deste trabalho foram: avaliar características físico-químicas de amidos modificados com peróxido de hidrogênio, utilizar os amidos obtidos para a elaboração de doce de leite e bala de goma americana e verificar a aceitação sensorial destes produtos. Para obtenção das amostras modificadas, os amidos foram suspensos em solução de Fe2SO4.7H2O 0,01% e, em seguida, adicionou-se peróxido de hidrogênio 1,25%, ajustou-se o pH para 3,0, deixou-se reagir a 45 °C/15 minutos, lavou-se e secou-se a amostra em estufa de ventilação forçada a 45 °C/24 horas. Os amidos modificados apresentaram maior expansão, conteúdo de carboxilas, poder redutor e susceptibilidade à sinérese. Em relação à viscosidade aparente, verificou-se que com a modificação química houve diminuição no pico de viscosidade, especialmente quando as amostras foram analisadas em pH 7,0. A análise sensorial do doce de leite revelou que houve preferência pelas amostras elaboradas com amido de mandioquinha-salsa modificado e com o amido de milho regular ácido-modificado. A bala de goma produzida com amido de mandioquinha-salsa modificado ocupou o segundo lugar entre a preferência dos julgadores.

The use of modified starches in foods is made to improve characteristics that the native cannot confer. The objective of this work was to evaluate physicochemical characteristics of starches from several botanical sources after chemical modification with H2O2 considering technological properties of interest to the food industry. The modified starches were used in dulce de leche and starch gum and the sensorial acceptance of these products was verified. The chemical treatment included the suspension of the native starches in a 0.01% Fe2SO4, followed by addition of 1.25% H2O2 at pH 3.0 and reaction time of 15 min at 45 °C. After this period the starch was recovered by filtration, washed and oven-dried at 45 °C for 24 hours. The modified starches had higher expansion, carboxyl content, reducing power and susceptibility to syneresis. There was a decrease in the viscosity peak of the modified starches especially when the samples were analyzed in pH 7.0. The sensorial evaluation indicated that dulce de leche produced with addition of Peruvian carrot modified starch and regular corn acid-modified starch were the preferred samples. The starch gum made with modified starch of Peruvian carrot reached the second position on global preference between the panelists.