Heterostructures constructed with mesoporous silica and layered double hydroxides are interesting for catalytic and drug delivery applications. Different arrangements between these phases are possible. In this study, we prepared heterostructures by embedding layered double hydroxides phases [M4Al2(OH)12](CO3) (M = Mg2+ or Zn2+) within the MCM41 mesoporous silica type phase. According to our results, the most critical step of this preparation is the removal of the organic template used to create the mesopores in the silica phase, which can be done by calcination or extraction with solvent, normally a mixture of ethanol and a mineral acid. The results reported in this study demonstrate that both can cause structural changes in the components of the heterostructure at different extensions. Calcination promoted the collapse of the layered hydroxide phases. Attempts made for their reconstruction through rehydration, which is a quite known process, were not completely effective and also dependent on the chemical composition of the layered phase. The complete template removal with preservation of the layered phases was possible using the extraction method but by replacing the mineral acid with NH4Cl. However, some discrete structural changes were identified possibly due to a partial lixiviation of Al3+ from the double hydroxide layers.

Nanocompósitos à base de amido de mandioca, argila sintética hectorita e açúcar invertido (plastificante) foram preparados por processo em meio aquoso (casting) produzindo filmes transparentes e homogêneos. Pequenas quantidades de argila (5-15% em massa) produzem principalmente nanocompósitos esfoliados, enquanto grandes quantidades (30% em massa) promovem a formação de nanocompósitos intercalados. Os espectros FT-Raman mostram que bandas sensíveis à ligação de hidrogênio em grânulos de amido são progressivamente deslocadas para frequências menores quando o teor de argila é aumentado. Os nanocompósitos mostram um comportamento térmico semelhante até 320 ºC, enquanto a decomposição da biomolécula em cerca de 500 ºC é dependente do teor de argila. A liberação de CO2 em aproximadamente 300 ºC (decomposição não oxidativa das cadeias poliméricas) diminui se comparada com o desprendimento desse gás em 500 ºC quando a quantidade de argila é aumentada. Filmes com teor de argila maior que 10% não mostram melhora substancial nas propriedades de alongamento ou resistência.

Polymer-clay nanocomposites (PCN) based on cassava starch, synthetic hectorite clay and inverted sugar cane syrup (plasticizer) were prepared by solvent-assisted (casting) process producing transparent and homogeneous films. Small amounts of clay (5-15 wt.%) resulted mainly in exfoliated nanocomposites while large amounts (30 wt.%) promote the intercalated nanocomposites formation. FT-Raman bands sensitive to hydrogen bonding in starch granules are progressively shifted to lower wavenumbers as the clay content is raised. Nanocomposites show a similar thermal behavior up to 320 ºC while the biomolecule decomposition at about 500 ºC is dependent on the clay content. CO2 release at about 300 ºC (non-oxidative decomposition of polymeric chains) decreases if compared to the gas delivery at ca. 500 ºC, as the clay content is increased. Films with clay content higher than 10 wt.% show no substantial benefit for either elongation or resistance properties.

A modificação química do material lamelar K4Nb6O17 foi investigada sistematicamente através da reação de sua forma protônica (H2K2Nb6O17) em soluções alcalinas contendo os cátions tetrametilamônio (tma+), tetraetilamônio (tea+) ou tetrapropilamônio (tpa+). A quantidade intercalada corresponde a 50% (para tma+), 25% (para tea+) e 15% (para tpa+) da carga negativa do H2K2Nb6O17 (considerando a troca iônica na região interlamelar I). As amostras de hexaniobato apresentam reflexões basais (020) de 23,0, 26,3 e 26,5 Å quando intercaladas, respectivamente, com tma+, tea+ e tpa+. Aquecendo-se as amostras acima de 200-250 ºC, observa-se a liberação de CO2; a reação de eliminação de Hofmann também é observada para as amostras de hexaniobato-tpa+. As imagens de microscopia eletrônica de varredura mostram a presença predominante de partículas em forma de placas; partículas em forma de bastões também são observadas nas amostras contendo íons volumosos. A reação de intercalação é promovida na ordem tma+ > tea+ > tpa+, enquanto a formação de uma dispersão de partículas coloidais é facilitada na ordem inversa.

Chemical modification of the layered K4Nb6O17 material was systematically investigated through the reaction of its proton-exchanged form (H2K2Nb6O17) in alkaline solutions containing tetramethylammonium (tma+), tetraethylammonium (tea+) or tetrapropylammonium (tpa+) cations. The intercalated amount reaches 50% (for tma+), 25% (for tea+) and 15% (for tpa+) of the H2K2Nb6O17 negative charge (concerning the exchange at interlayer I) due to the steric hindrance of larger cations. Hexaniobate samples present (020) basal reflections equal to 23.0, 26.3 and 26.5 Å once intercalated respectively with tma+, tea+ and tpa+. When samples are heated above 200-250 ºC, CO2 evolution is observed; Hofmann elimination reaction is also detected for hexaniobate-tpa+ samples. Scanning electron microscopy images show the predominance of plate-like particles; stick-like particles are also observed for samples containing bulky ions. The intercalation reaction is promoted in the order tma+ > tea+ > tpa+, while the formation of a dispersion of colloidal particles is facilitated in the inverse order.

Little is known about airway inflammatory markers in chronic obstructive pulmonary disease (COPD). The objective of the present study was to identify and try to correlate pulmonary and peripheral blood inflammatory markers in COPD. In a cross-sectional study on patients with stable COPD, induced sputum and blood samples were collected for the determination of C-reactive protein, eosinophilic cationic protein, serum amyloid A protein, a-1 antitrypsin (a-1AT), and neutrophil elastase. Twenty-two patients were divided into two groups according to post-bronchodilator forced expiratory volume in the first second (%FEV1): group 1 (N = 12, FEV1 <40%) and group 2 (N = 10, FEV1 ³40%). An increase in serum elastase, eosinophilic cationic protein and a-1AT was observed in serum markers in both groups. Cytology revealed the same total number of cells in groups 1 and 2. There was a significantly higher number of neutrophils in group 1 compared to group 2 (P < 0.05). No difference in eosinophils or macrophages was observed between groups. Serum elastase was positively correlated with serum a-1AT (group 1, r = 0.81, P < 0.002 and group 2, r = 0.83, P < 0.17) and negatively correlated with FEV1 (r = -0.85, P < 0.03 and -0.14, P < 0.85, respectively). The results indicate the presence of chronic and persistent pulmonary inflammation in stable patients with COPD. Induced sputum permitted the demonstration of the existence of a subpopulation of cells in which neutrophils predominated. The serum concentration of all inflammatory markers did not correlate with the pulmonary functional impairment.

The niobate with formula K4Nb6O17 has a layered structure formed by stacked negative sheets and exchangeable cations in the interlayer region. In this study we discuss some structural aspects related to the ion exchange in layered hexaniobate based on X-ray diffractometry and vibrational Raman spectroscopy data. Hexaniobate has two distinct interlayer regions and the potassium ions of one interlayer in particular are preferably exchanged by other cations, leading to an interstratified material.

Two-dimensional inorganic networks can shown intracrystalline reactivity, i.e., simple ions, large species as Keggin ions, organic species, coordination compounds or organometallics can be incorporated in the interlayer region. The host-guest interaction usually causes changes in their chemical, catalytic, electronic and optical properties. The isolation of materials with interesting properties and making use of soft chemistry routes have given rise the possibility of industrial and technological applications of these compounds. We have been using several synthetic approaches to intercalate porphyrins and phthalocyanines into inorganic materials: smectite clays, layered double hydroxides and layered niobates. The isolated materials have been characterized by elemental and thermal analysis, X-ray diffraction, surface area measurements, scanning electronic microscopy, electronic and resonance Raman spectroscopies and EPR. The degree of layer stacking and the charge density of the matrices as well their acid-base nature were considered in our studies on the interaction between the macrocycles and inorganic hosts.