RESUMO: A displasia coxofemoral (DCF) é afecção comum na clínica cirúrgica de pequenos animais. Entre as técnicas cirúrgicas para controle da DCF, a osteotomia pélvica tripla (OPT) e a cunha sacroilíaca (CSI), promovem rotação lateral acetabular no eixo axial (ventroversão), aumentando a cobertura acetabular e a estabilidade da articulação. Desta forma, o presente estudo objetivou avaliar radiograficamente, por meio da aferição do ângulo de Norberg (NA) e da porcentagem de cobertura acetabular (PCA), a ventroversão acetabular induzida pela técnica da cunha sacroilíaca, associada ou não às osteotomias pélvicas, além de verificar a exequibilidade das cunhas confeccionadas de poliamida com angulação de 20ο e 30ο. O software utilizado para aferir o AN e o PCA foi o AutoCAD® 2009. Dez pelves de cadáveres caninos foram avaliadas radiograficamente em quatro momentos: MO (Grupo Controle), M1 (cunhas de 20ο e 30ο), M2 e M3 (cunhas associadas à osteotomia bilateral do púbis e ísquio, respectivamente). Não houve aumento significativo da ventroversão em M1, M2 e M3. A técnica de cunha sacroilíaca de poliamida mostrou-se exequível, estável e de fácil aplicação. Não obstante, o software utilizado mostrou-se eficiente e de fácil utilização nas aferições do AN e PCA. Neste estudo, mesmo tratando-se de cadáveres de cães adultos e de maioria não displásicos, concluiu-se que a utilização da técnica de cunha sacroilíaca não necessita de associação à ostectomia púbica e a osteotomia do ísquio por não promoverem aumento significativo do AN e da PCA.

ABSTRACT: Canine hip dysplasia (CHD) is a common condition observed in the surgical clinics for small animals. Among the surgical techniques for management of CHD, triple pelvic osteotomy and sacroiliac wedge promote acetabular lateral axial rotation (ventroversion), increasing acetabular coverage and joint stability. The present study aimed to evaluate radiographically, by measuring the Norberg angle (NA) and the acetabular coverage percentage (ACP), the acetabular ventroversion induced by the sacroiliac wedge technique, with or without pelvic osteotomies; we also checked the feasibility of wedges made of polyamide with an angulation of 20° and 30°. The software used to measure NA and ACP was AutoCAD® 2009. Pelves from 10 canine corpses were evaluated radiographically at four time-points: M0 (Control Group), M1 (wedges of 20° and 30°), M2 and M3 (wedges associated with bilateral pubis and ischium osteotomies, respectively). There was no significant increase in the acetabular ventroversion at M1, M2, and M3. The polyamide sacroiliac wedge technique proved to be feasible, stable, and easy to apply. Further, the software proved to be efficient and easy to use for NA and ACP measurements. In the present study, even in the cases of non-dysplasic adult canine corpses, it was concluded that the sacroiliac wedge technique does not require to be accompanied by pubis and ischial osteotomies because they did not significantly increase the NA and ACP.

Abstract: Several microbiological indicators of soil quality present high sensitivity, but little is known about the influence of topographic factors on them. This work aimed to evaluate variability of biological indicators of soil quality across a hillslope under native forest and the influence of topographic factors on them. Four positions on a hillslope were evaluated. Activity of the enzymes β-glucosidase, acid phosphatase, urease and fluorescein diacetate (FDA) hydrolysis were determined, as well as basal and substrate-induced respiration, and density of microorganisms: total bacteria, total fungi, actinobacteria, phosphate solubilizers, ammonifiers, native rhizobia, free-living N2-fixing bacteria, spores of arbuscular mycorrhizal fungi and percentage of root colonization by arbuscular mycorrhizal fungi. Activity and density of microorganisms were correlated with topographic factors. The relation of these factors to the variations of the evaluated indicators was determined using the random forest algorithm. Microbiological indicators varied according to the hillslope positions. The indicators urease, basal respiration, spore density, mycorrhizal colonization, total bacteria and fungi, phosphate solubilizers, and free-living N2-fixing bacteria detected in JNFB and FAM culture medium did not vary with terrain attributes and were therefore more indicated in cases of topographic variations. This and future studies can help to select the best microbiological indicators for different conditions.

ABSTRACT Preliminary results of in vitro experiments with multicontaminated soils and solid media indicated that nodulating diazotrophic bacteria of the genus Cupriavidus are promising for the remediation of contaminated environments due to their symbiosis with legumes and metal tolerance. Thus, strains of Cupriavidus spp. (LMG 19424T, UFLA 01-659, UFLA 01-663, and UFLA 02-71) were tested for their ability to tolerate and bioaccumulate cadmium (Cd), copper (Cu), and zinc (Zn) in Luria-Bertani broth. Changes in the growth pattern of Cupriavidus strains in the presence or absence of heavy metals were analyzed by scanning electron microscopy and metal allocation by transmission electron microscopy, to clarify the mechanisms of bioremediation. Highest tolerance was detected for strain UFLA 01-659 (minimum inhibitory concentration of 5, 4.95, and 14.66 mmol L−1 of Cd, Cu, and Zn, respectively). Among the removal rates of the metals tested (9.0, 4.6, and 3.2 mg L−1 of Cd, Cu, and Zn, respectively), the bacterial activity was clearly highest for Cd. The efficiency of strain UFLA 01-659 in removing the heavy metals is associated with its high biomass production and/or higher contents of heavy metals adsorbed and absorbed in the biomass. In response to the presence of heavy metals in the liquid culture medium, the bacteria produced exopolysaccharides and small and aggregated cells. However, these responses varied according to the strains and heavy metals. Regarding allocation, all heavy metals were adsorbed on the cell wall and membrane, whereas complexation was observed intracellularly and only for Cu and Zn. These results indicate the possibility of using C. necator UFLA 01-659 for remediation in areas with very high Cd, Cu, and Zn contents.

Propomos um novo método de migração em profundidade baseado na solução da equação da onda com densidade constante no domínio da freqüência. Uma aproximação de Padé complexa é usada para aproximar o operador de evolução aplicado na extrapolação do campo de ondas. Esse método reduz as imprecisões e instabilidades devido às ondas evanescentes e produz imagens com menos ruídos numéricos que aquelas obtidas usando-se a aproximação de Padé real para o operador exponencial, principalmente em meios com fortes variações de velocidades. Testes em dados de afastamento nulo do modelo de sal SEG/EAGE e nos dados de tiro comum 2-D Marmousi foram realizados. Os resultados obtidos mostram que o método de migração proposto consegue lidar com fortes variações laterais e também tem uma boa resposta para refletores com mergulhos íngremes. Os resultados foram comparados àqueles resultados obtidos com os métodos split-step Fourier (SSF), phase shift plus interpolarion (PSPI) e Fourier diferenças-finitas (FFD).

We propose a new method of depth migration based on a constant density variable velocity wave equation in the space-frequency domain. A complex Padé approximation of the wave equation evolution operator is used for wavefield extrapolation. This method mitigates the inaccuracies and instabilities due to evanescent waves and produces images with fewer numerical artifacts than those obtained with a real Padé approximation of the exponential operator, mainly in media with strong velocity variations. Tests on zero-offset data from the SEG/EAGE salt model and the 2D Marmousi prestack dataset show that the proposed migration method can handle strong lateral variations and also has a good steep dip response. We compare the results of the proposed method with those obtained using split-step Fourier (SSF), phase shift plus interpolation (PSPI) and Fourier finite-difference (FFD) methods.

Os coeficientes de reflexão de onda qP em uma interface plana que separa dois meios anisotrópicos dependem dos parâmetros elásticos dos meios envolvidos de maneira não linear. Aproximações lineares para a refletividade de ondas qP pressupondo fraco contraste de impedância e fraca anisotropia levam a uma forma simples para se fazer à análise de AVO/AVD. Neste trabalho a solução das equações de Zoeppritz é rescrita explicitamente em função de matrizes de impedância e polarização. Além disso, utilizando-se esta abordagem, é apresentada uma metodologia geral mais simples para se obter as formas linearizadas. Estas formas linearizadas para os coeficientes de reflexão da onda qP e das ondas convertidas para uma onda qP incidente apresentam resultados muito próximos da formulação exata para ângulos de incidência menores que 30(0) considerando-se um contraste de impedância moderado e anisotropia em limites geologicamente aceitáveis.

The reflection coefficients at a planar interface separating two anisotropic media have a nonlinear dependence on the elastic parameters and densities of both media. Linear approximations on the elastic parameters for the qP wave reflectivity are more convenient for AVO/AVD analysis. We present the solution of the Zoeppritz equations in terms of impedance and polarization matrices. Using this approach and assuming weak impedance contrast and weak anisotropy, a simple derivation of linearized approximations for qP the reflectivity is presented for general anisotropy. The linear approximations of reflection coefficients, qP and converted waves, for qP incidence are very close to the exact results for incidence angles up to 30 degrees considering moderate impedance contrast and anisotropy.