Abstract The cereal bars are products globally accepted and consumed by all age groups. In this study, by Response Surface Methodology (RSM), the effects of different concentrations of inulin, acacia gum and sorbitol in the characteristics of hardness, color and water activity of cereal bars were studied. A total of 17 experiments being 8 factorials, 6 axials and 3 repetitions at the central point were performed. The regression model presented for the hardness was significant indicating that the quantities of inulin, acacia gum and sorbitol affect the hardness of the cereal bars. Referring to color it was observed that the less inulin and more sorbitol, the more yellow the tone of the bars was. The results of water activity were not influenced by the ingredients. In a comprehensive assessment through the RSM, the bars coming from the treatments 5 and 11 provided the best results and when submitted to sensory evaluation they were not statistically different. Although these bars have presented reduction of 15 to 20% in calorific value, according to the DRC 54/2012 they cannot be considered products with a reduced caloric value. These bars also presented considerable level of soluble fiber (more than 3% inulin).

Resumo Em vista da crescente demanda da população por questões relacionadas à saúde, nutrição e bem-estar, o mercado alimentício tem se preocupado em aumentar a inserção de ingredientes mais saudáveis como as frutas, por exemplo, visando atender à nova demanda do consumidor. A otimização de um processo é dependente da presença de dados precisos que permitam o dimensionamento correto dos equipamentos. O objetivo deste trabalho foi caracterizar amostras comerciais de produtos à base de frutas e avaliar as propriedades termofísicas (densidade, calor específico, difusividade térmica e condutividade térmica) e reológicas (viscosidade aparente e energia de ativação), visando à adequação a modelos teóricos. Os resultados foram ajustados a modelos matemáticos apresentando erros relativos entre 0,2% e 50%, sendo o modelo de ajuste da densidade o mais preciso (erro máximo de 1,7%). O comportamento reológico das amostras teve melhor ajuste ao modelo Lei da Potência (R2 > 0,96) e a viscosidade relacionou-se bem com a temperatura, segundo a equação de Arrhenius (R2 > 0,90).

Summary In view of the increasing demand of the population with respect to health-related issues, nutrition and wellbeing, the food market has been concerned to increase the inclusion of healthier ingredients such as fruits, for example, to meet this new consumer demand. The optimization of a process is dependent on the presence of accurate data to allow for the correct sizing of the equipment. The aim of this study was to characterize commercial samples of fruit-based products and evaluate their thermophysical (density, specific heat, thermal diffusivity and thermal conductivity) and rheological (viscosity and apparent activation energy) properties in order to fit the theoretical models. The results were adjusted to mathematical models showing relative errors between 0.2 and 50%, the density adjustment model (maximum error of 1.7%) being the most accurate. The rheological behavior of the samples fitted the power law model best (R2> 0.96), and the viscosity correlated well with the temperature according to the Arrhenius equation (R2> 0.90).

A composição química da farinha de trigo e a presença de fibras afeta as características dos pães. Uma forma de contribuir com a prevenção de doenças crônicas não transmissíveis é através de alimentação saudável, incluindo grãos integrais na dieta alimentar e reduzindo as calorias de determinado alimento, substituindo a gordura. Assim, este trabalho tem como objetivo determinar a composição centesimal das amostras de farinha de trigo integral, refinada e as misturas entre elas; bem como os parâmetros farinográficos (absorção de água, tempo de desenvolvimento e estabilidade) das mesmas. Além disso, verificar volume específico, perfil de textura do miolo e análise de imagem de pães elaborados com 60% de farinha de trigo integral e com 3% de gordura ou com substituto de gordura. Os dados foram submetidos à análise de variância. À medida que aumenta o percentual de farinha integral, os teores de proteína, cinzas e fibra insolúvel alcançam valores significativamente maiores e a absorção de água fica maior na farinografia, bem como o tempo de desenvolvimento e a estabilidade. O amido modificado enzimaticamente utilizado na elaboração de pão com 60% de farinha de trigo integral funcionou como um efetivo substituto de gordura. O pão integral elaborado com substituto de gordura apresentou volume específico significativamente igual ao pão integral elaborado com gordura, porém com diferenças em relação a parâmetros do perfil de textura, maior firmeza e menor elasticidade além de maior densidade celular do que o pão elaborado com gordura.

Bread characteristics are dependent upon the chemical composition and fiber content of the wheat flour used. A healthy diet can help prevent chronic diseases, where whole grains and fewer calories from fat are components of a healthy diet. The aims of this study were to determine the centesimal composition of wheat flour samples (whole, refined, and flour blends) along with their farinographic parameters (water absorption, development time and stability) and also to verify the specific volume, crumb texture profile and digital imaging of bread loaves made with 60% whole wheat flour and 3% fat or fat replacer. Increasing the whole wheat flour percentage in the blends also increased levels of protein, ash and insoluble fiber. All the farinographic parameters were also increased. Enzymatically modified starch was found to be an effective fat replacer in whole wheat loaves. The loaves made using fat replacer had the same specific volume and higher cell density as those made with fat, but exhibited different texture profile parameters such as higher hardness value and lower springiness value.

Food industries have been concerned about managing the waste generated by their production processes in order to minimize environmental impacts and also about the development of formulations with different and innovative ingredients such as fruits from the Brazilian savanna. Seeking to meet the expectations of consumers who desire healthy and practical products, this study aimed to evaluate the oxidative stability and the variations in chemical composition and antioxidant potential of cereal bars made with fruit peels and baru nuts packaged in different types of packaging. The bars formulated were packed in four different types of packaging: laminated without vacuum (LWV), transparent without vacuum (TWV), transparent under vacuum (TV), and laminated under vacuum (LV); they were subsequently analyzed for proximate composition, fatty acid profiles, antioxidant activity, and oxidative capacity. The results showed that the cereal bars made with fruit peel and baru are sources of protein, dietary fiber, and fat, especially unsaturated fatty acids such as oleic and linoleic acids. The cereal bars exhibited oxidative stability up to 120 days of storage, and the type of packaging was not significant for the variables evaluated; therefore, they can be stored in low cost packaging such as transparent packaging without vacuum for a period of 120 days.

O presente trabalho avaliou a utilização de farelo de trigo e polidextrose como fontes de fibra no enriquecimento de biscoitos de polvilho. Utilizou-se a Metodologia de Superfície de Resposta para verificar a influência da adição destes ingredientes nos parâmetros de qualidade dos biscoitos. As respostas avaliadas do planejamento experimental fatorial completo 2² foram o volume específico, a dureza instrumental, a umidade e a cor - parâmetros L, a* e b*. Para as respostas: volume específico e dureza instrumental, todos os fatores foram significativos, a 95% de confiança, com R² = 0,9307 e 0,8091, respectivamente. Pela análise das superfícies geradas, pode-se observar que o farelo de trigo e a polidextrose reduziram o volume específico e o farelo teve maior efeito no aumento da dureza. A substituição de polvilho azedo por farelo de trigo e polidextrose nas proporções de 1,5 e 5%, respectivamente, gerou uma amostra rica em fibras, com 6,23% de fibra alimentar (calculado teoricamente), sem prejuízo considerável para as características de expansão e dureza, e com boa aceitação sensorial.

This work evaluated the use of wheat bran and polidextrose as fiber sources to enrich fermented cassava starch biscuits. The Response Surface Methodology was used to verify the influence of the addition of these fiber sources on the quality parameters of the biscuits. The responses of the 2² central composite rotational experimental design that were evaluated were specific volume, hardness, and moisture and color - parameters L, a*, and b*. For the specific volume and hardness responses, all factors were significant: 95% confidence level, with R² of 0.9307 and 0.8091, respectively. Analyzing the surfaces obtained it could be observed that the wheat bran and polidextrose reduced the specific volume and the wheat bran had a greater effect in increasing hardness. The substitution of fermented cassava starch by wheat bran and polidextrose in proportions of 1.5 and 5%, respectively, produced a fiber-rich sample with 6.23% dietary fiber (calculated theoretically) without affecting the expansion and texture characteristics negatively and with a good sensory acceptance.