ABSTRACT Public Science and Technology Institutions (STIs) need to assume and consolidate a proactive role in innovation management to transform knowledge advances into appropriate results for the industrial base. It is required a strategic managerial action aimed at sustaining the sector’s ecosystem and guided by the principle of entrepreneurship. Considering the context of STIs in an integrated approach to the technological innovation process, two questions were raised: How to guarantee an architecture and organizational governance that favor entrepreneurial behavior by linking it to the technological innovation strategy in the ecosystem, and how to expand and promote interactions among ecosystem agents, ensuring an environment leading to innovation and the dissemination of the knowledge generated. The proposed managerial model can be applied in any national or international technology-based innovation ecosystem keeping the characteristics of the business environment. The authors used extensive literature research and direct observation to develop ideas and link them to this management practice. The result was a strategic innovation management model for technology-based STIs. It has management instruments that enhance the proactive performance of ecosystem agents and helps them transfer and absorb the developed technologies. (STIs base sectors sector s entrepreneurship process raised generated technologybased technology based practice technologies

ABSTRACT: The statistical analysis of academic literature, also known as “bibliometrics”, is being increasingly applied to analyse research trends, to identify emerging areas of science and to find out where and how often specific articles are cited. The aim of this study was to identify technological innovation trend patterns in the aerospace sector applying bibliometric analysis over the period 2008 - 2015. In this study the keywords space technology, satellite, space launch vehicle, spacecraft, rocket and space station were used to scrutinize the database Web of Science (ISI). The obtained records were analysed using the Patent Insight Pro software (2015). It was observed that the researches related to aerospace technological development has been focused in satellites, giving also some directions for satellite launch vehicles. Bibliometric analysis revealed concern on new low-cost technologies development, and the applied logistic fit suggests that over the next five years the continuity on new space technologies development will be mostly related to small satellites, with also contributions associated with high-resolution imagery in order to improve Earth observation in low orbit.

This study carried out the microstructural characterization, by light microscopy, of sintered SiC in the presence of liquid phase at temperatures of 1800, 1850 and 1900 ºC, added with Al2O3 and Y2O3 as well with Al2O3-YAG composite in the proportions of 5, 10 and 15% by weight. It was possible to observe the formation of microstructural patterns resulting from the heterogeneous segregation of the additives, such observation is associated to the pulling of additives during the initial stage of ceramography. Two ceramographic paths were followed: method I - surface grinding followed by manual polishing and method II - automatic grinding and polishing. In order to compare the two techniques the analysis of 3D roughness by light interferometry and the Vickers microhardness test were used. It was concluded by the analysis of variance with 95% confidence that the degree of finishing obtained by both methods allowed the adequate microstructural characterization, as well as, to meet the requirements established by the ASTM C1327-15 standard for hardness test.

ABSTRACT High-altitude platforms (HAPs) are aircraft, usually unmanned airships or airplanes positioned above 20 km, in the stratosphere, in order to compose a telecommunications network or perform remote sensing. In the 1990 and 2000 decades, several projects were launched, but very few had continued. In 2014, 2 major Internet companies (Google and Facebook) announced investments in new HAP projects to provide Internet access in regions without communication infrastructure (terrestrial or satellite), bringing back attention to the development of HAP. This article aims to survey the history of HAPs, the current state-of-the-art (April 2016), technology trends and challenges. The main focus of this review will be on technologies directly related to the aerial platform, inserted in the aeronautical engineering field of knowledge, not detailing aspects of the telecommunications area.

Refractory alloys with silicides and borides have been used in high temperature applications because their elevated melting point, good oxidation resistance and high strength-to-weight ratio. The present study approaches the preparation of Ti-7.5Si-22.5B (at.-%) alloys through high-energy ball milling and sintering. The powders and compacts obtained in these processes were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), density measurements, chemical analyses and Vickers hardness. It was verified that silicon and boron powders are dissolved in the titanium during milling with an iron contamination up to 6.0 at.-%. Furthermore, the use of short milling times and alcohol during the final stages of milling increases the powder yield. Such increasing was obtained even with a high rotary speed (300 rpm), which generally creates higher temperatures and consequently more sticking. After sintering of the as-milled powders, it was indentified mainly the Ti+Ti6Si2B+TiB+Ti5Si3 phases in the Ti-7.5Si-22.5B sintered alloys, which presented hardness values up to 800 HV. The materials produced by the present work can be employed in coating research as sputtering targets.

Porous silicon layers (PSL) were produced by stain etching from a HF:HNO3 500:1 mixture with etching time varying in the range of 1 up to 10 min. The samples have presented nanometric porosity as a function of etching time, characteristic of heavily doped p type silicon. The residual stress and the correlation length of the layers were obtained through the analysis of the micro-Raman spectra using a phonon confinement model including a term to account for the amorphous phase. The residual compressive stress tends to increase as expected due to the contribution of smaller crystallites to be more representative as the etching time increases. PbTe thin films were electrodeposited on PSL from aqueous alkaline solutions of Pb(CH3COO)2, disodium salt of ethylendiaminetetraacetic acid (EDTA) and TeO2 by galvanostatic and potentiostatic method. It was also obtained nanostructured PbTe thin films with polycrystalline morphology evidenced by X-ray Diffraction (XRD) spectra. Scanning Electron Microscopy (SEM) analysis has demonstrated good films reproducibility with an average grain size of 100 nm.

The properties of hydrophilicity or hydrophobicity of materials are defined mainly, though not exclusively, by their composition, morphology and surface energy. In this work, titanium dioxide (TiO2) and aluminum oxide-alumina (Al2O3) ceramics prepared by uniaxial pressing were studied in terms of surface energy. The surfaces of these ceramics were treated with nitrogen plasma, using a stainless steel reactor excited by a 13,6 MHz radio frequency operating at 50 W input power and 13 Pa nitrogen pressure. The surface morphology was investigated by scanning electron microscopy (SEM) analysis. Surface energy and contact angle measurements were taken using a RAMÉ-HART goniometer. These measurements were taken as function of time, over a 21-day period. The contact angle and surface energy values were found to change by almost 34% in comparison to their initial values immediately following plasma treatment. Nonetheless, the hydrophilic character of the Al2O3 and TiO2 remained constant throughout the test period.