ABSTRACT Applications of tebuthiuron can increase the risks of environmental contamination and hinder the cultivation of sensitive species in succession. The objective of this work was to assess the residual activity and sorption of the herbicide tebuthiuron in soils with different physical and chemical attributes. The experiments were conducted in a completely randomized design with four replicates. The experiment for determining residual activity was conducted in a 2 × 7 factorial arrangement consisted of two herbicide doses (0.6 and 1.2 kg a.i. [active ingredient] ha-1) and seven sowing times (0, 60, 120, 180, 240, 300, and 360 days after herbicide application) in sandy loam and sandy clay loam soils. The experiment for evaluating sorption was conducted in a sandy loam soil and two clay loam soils with applications of increasing tebuthiuron doses (0.025, 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.50, 0.60, 0.70, and 0.80 kg a.i. ha-1). Regarding residual activity, the herbicide’s effect of the decreased over time, with no toxicity detected 360 days after application (DAA), regardless of the soils and doses used. Sandy loam soils had lower sorption, resulting in lower shoot dry weight and plant height and in higher phytotoxicity 21 days after emergence. Residual activity was detected 360 DAA in the studied soils. Tebuthiuron sorption was higher in soils with higher organic carbon and clay contents.

RESUMO A aplicação de tebuthiuron pode aumentar os riscos de contaminação ambiental e impossibilitar o cultivo sucessivo de espécies sensíveis. Neste sentido objetivou-se a atividade residual e sorção do herbicida tebuthiuron em solos com diferentes atributos físico-químicos. Os experimentos foram realizados em Iturama, MG, Brasil, em 2021, em delineamento inteiramente casualizado com quatro repetições. O experimento para determinação da atividade residual foi montado em fatorial 2 × 7, com os seguintes fatores: duas doses (0,6 e 1,2 kg i.a. [ingrediente ativo] ha-1) e 0, 60, 120, 180, 240, 300 e 360 dias após a aplicação em solos franco-arenosos e franco-argilosos arenosos. No experimento de avaliação da sorção foram utilizados dois solos franco-arenosos e dois franco-argilosos, que receberam doses crescentes de tebuthiuron (0.025, 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.50, 0.60, 0.70 and 0.80 kg a.i. ha-1). Por meio da matéria seca foi possível obter a relação de sorção. Com o passar do tempo, no estudo de atividade residual, foi observada diminuição do efeito do herbicida, não sendo detectada isenção de intoxicação após 360 dias da aplicação tanto nos solos quanto nas doses. Solos franco-arenosos apresentaram menor sorção, obtendo menor massa seca da parte aérea, altura e maior fitotoxicidade, aos 21 dias após a emergência. A atividade residual ainda foi detectada após 360 dias da aplicação nos solos estudados. A sorção de tebuthiuron foi maior em solos com maior teor de carbono orgânico e argila do solo.

Abstract Brazilian agribusiness is continuously seeking new technologies and arable areas for expansion. Often, the expansion often occurs without proper planning and integration with logistic system actors, especially in agricultural frontier regions like the MATOPIBA region. To improve investment decision-making, it is essential to plan the location of new bulk warehouses. This planning can facilitate a virtuous process that incorporates intermodality and environmental preservation aspects. The objective of this article is to evaluate whether a combination of locational criteria that consider environmental and intermodality aspects can identify the most suitable regions for the installation of subterminal warehouses. The methodology combines Analytic Hierarchy Process (AHP) and geoprocessing techniques. The application of the method allowed ranking the candidate regions for the installation of warehouses. The results indicated three large areas suitable for the grain storage that together represent 12% of the study area. The conclusion of the research was that, in addition to economic aspects, the inclusion of environmental and logistics factors in the spatial location analysis promotes a more sustainable storage network, with well-positioned warehouses and less competition.

Resumo O agronegócio brasileiro avança em busca de tecnologias e novas áreas agricultáveis. Muitas vezes, a expansão das áreas agrícolas ocorre sem planejamento integrado com os atores do sistema logístico, especialmente em regiões de fronteira agrícola, como a região do MATOPIBA. O planejamento da localização de novos armazéns graneleiros contribui para a melhoria do processo de tomada de decisão para investimentos. Além disso, possibilita um processo virtuoso que permite a incorporação de aspectos para fomentar a intermodalidade e a preservação ambiental. Assim, o objetivo deste artigo é avaliar se uma combinação de critérios locacionais que considerem aspectos ambientais e de intermodalidade pode identificar regiões mais adequadas para a instalação de armazéns graneleiros do tipo subterminal. A metodologia utilizada agrega a Análise Hierárquica de Processos (AHP) e técnicas de geoprocessamento. A aplicação dos métodos permitiu classificar as regiões candidatas para a instalação de armazéns. Os resultados indicaram três grandes áreas adequadas para a armazenagem de grãos, que juntas representam 12% da área de estudo. A conclusão da pesquisa foi que, além de aspectos econômicos, a inclusão de fatores ambientais e de infraestrutura logística na análise espacial da localização promove uma rede de armazenagem mais sustentável, com armazéns bem posicionados e com menor competição.

The objective of this study was to evaluate the effect of including cilostazol in the in vitro maturation medium of oocytes on the in vitro production of sheep embryos. Oocytes were collected from ovaries obtained from a slaughterhouse by follicular aspiration with a vacuum pump. The oocytes were divided into four maturation groups: the CON group, where the cumulus-oocyte complexes were immersed in TCM-199 supplemented with 500 IU of penicillin, 0.5 mg of streptomycin, 1.25 µg of amphotericin, 0.2 mM of sodium pyruvate, 10% (v/v) fetal bovine serum (FBS), 10 ng/mL of epidermal growth factor (EGF), 10 µg/mL of FSH, 10 µg/mL of LH, 10 µg/mL of estradiol, and 100 µM of cysteamine; and in the CILO0.3, CILO1, and CILO10 groups, the oocytes were matured in the CON group medium without the addition of cysteamine and supplemented with concentrations of 0.3, 1, and 10 µM of cilostazol, respectively. After 24 hours, the oocytes were evaluated for the presence or absence of cumulus cells and the degree of expansion and then subjected to in vitro fertilization (IVF) with sperm in FIV medium. After IVF, the presumptive zygotes were cultured in vitro. Cleavage was evaluated on day 2, with day 0 being the start of IVF. Results were expressed as a percentage, and variables such as cumulus cell expansion and the number of cleaved structures were compared using the chi-square test in the Epi Info software (Epi Info 7.2.5, Atlanta, GA, USA, 2021). Results were considered significant when P lt; 0.05. All groups showed 100% cumulus cell expansion, and there were no significant differences in cumulus cell expansion degree between the cilostazol- and cysteamine-supplemented groups (P gt; 0.05), as well as no significant differences in cleavage rates between the cilostazol- and cysteamine-supplemented groups (P gt; 0.05).

El objetivo de este estudio fue evaluar el efecto de la inclusión de cilostazol en el medio de maduración in vitro de ovocitos sobre la producción in vitro de embriones ovinos. Para ello, se realizaron recolecciones de ovocitos provenientes de ovarios obtenidos en un matadero mediante el método de aspiración folicular con bomba de vacío. Los ovocitos se dividieron en cuatro grupos de maduración: grupo CON, donde los complejos cúmulus ovocitos se sumergieron en TCM-199, suplementado con 500 UI de penicilina, 0,5 mg de estreptomicina, 1,25 µg de anfotericina, 0,2 mM de piruvato de sodio, 10% (v/v) de suero fetal bovino (SFB), 10 ng/mL de factor de crecimiento epidérmico (EGF), 10 µg/m de FSH, 10 µg/mL de LH, 10 µg/mL de estradiol y 100 µM de cisteamina; y en los grupos CILO0,3; CILO1 y CILO10, los ovocitos se maduraron en el medio del grupo CON, pero sin la adición de cisteamina y suplementado con las concentraciones de 0,3; 1 y 10 µM, respectivamente. Después de 24 horas, los ovocitos se evaluaron en cuanto a la presencia o no de células del cúmulus y en cuanto al grado de expansión y se destinaron a la fecundación in vitro, en medio FIV, junto con espermatozoides. Después de la FIV, los presuntos cigotos siguieron para el cultivo in vitro. Se evaluaron las clivajes en el día 2, siendo el día 0 el día del inicio del CIV. Los resultados se expresaron en porcentaje y las variables de expansión de las células del cúmulus y número de estructuras clivadas se compararon mediante la prueba del chi-cuadrado del software Epi Info (Epi Info 7.2.5, Atlanta, GA, EE. UU., 2021). Los resultados se consideraron significativos cuando P lt; 0,05. En relación a la expansión de las células del cúmulus, todos los grupos presentaron el 100% de expansión. No hubo diferencias significativas en cuanto al grado de expansión de las células del cúmulus entre los grupos suplementados con cilostazol y cisteamina (P gt; 0,05), así como no hubo diferencias significativas entre las tasas de clivaje entre los grupos suplementados con cilostazol y cisteamina (P gt; 0,05).

O objetivo deste estudo foi avaliar o efeito da inclusão de cilostazol no meio de maturação in vitro de oócitos sobre produção in vitro de embriões ovinos. Para isso, foram realizadas colheitas de oócitos oriundos de ovários obtidos em abatedouro por meio do método de aspiração folicular com bomba de vácuo. Os oócitos foram divididos em quatro grupos de maturação: grupo CON, onde os complexos cumulus oócitos foram imersos em TCM-199, suplementado com 500 UI de penicilina, 0,5 mg de estreptomicina, 1,25 µg de anfotericina, 0,2 mM de piruvato de sódio, 10% (v/v) de soro fetal bovino (SFB), 10 ng/mL de fator de crescimento epidérmico (EGF), 10 µg/m de FSH, 10 µg/mL de LH, 10 µg/mL de estradiol e 100 µM de cisteamina; e nos grupos CILO0,3; CILO1 e CILO10, os oócitos foram maturados no meio do grupo CON, mas sem a adição de cisteamina e suplementado com as concentrações de de 0,3; 1 e 10 µM , respectivamente. Após 24h, os oócitos foram avaliados quanto a presença ou não de células do cumulus e quanto ao grau de expansão e destinados à fecundação in vitro, em meio FIV, juntamente com espermatozoides. Após a FIV, os presumíveis zigotos seguiram para o cultivo in vitro. Foram avaliadas clivagens no dia 2, sendo dia 0 o dia do início do CIV. Os resultados foram expressos em porcentagem e as variáveis de expansão das células do cumulus e número de estruturas clivadas foram comparadas por meio do teste qui-quadrado do software Epi Info (Epi Info 7.2.5, Atlanta, GA, EUA, 2021). Os resultados foram considerados significativos quando P lt; 0,05. Em relação à expansão das células do cumulus, todos os grupos apresentaram 100% de expansão. Não houve diferenças significativas quanto ao grau de expansão das células do cumulus entre os grupos suplementados com cilostazol e cisteamina (P gt; 0,05), assim como não houve diferenças significativas entre as taxas de clivagem entre os grupos suplementados com cilostazol e cisteamina (P gt; 0,05).

ABSTRACT Objective: To assess the in-vitro effect of single applications of CPP-ACP pastes and different fluoridated solutions on the prevention of dental caries around orthodontic brackets. Material and Methods: Tooth/bracket sets (n=65) were immersed in artificial saliva (1h at 37ºC) and randomly subjected to single applications (100µL; 1min) of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP emulsion), CPP-ACP with fluoride (CPP-ACPF emulsion), solutions of titanium tetrafluoride (TiF4) or sodium fluoride (NaF), or no treatment (CG). Multispecies biofilm (5 x 105 CFU/mL) was formed in the presence of 2% sucrose. After 24 h, the pH and the concentration of total soluble fluoride (TSF) were analyzed by culture medium. The presence of active white spot lesions (WSL) evaluated by macroscopic examination and the percent surface mineral loss (%SML) were analyzed. Also, the topography of enamel was detected by analysis of scanning electron microscopy (SEM). The data was assessed by chi-square, Kruskal-Wallis, and Mann-Whitney tests (p < 0.05). Results: Fluoride-containing compounds led to a smaller pH reduction than did CPP-ACP and CG (p<0.05). There was difference in TSF between the groups (p<0.05), denoted as TiF4> NaF > CPP-ACPF > CPP-ACP > CG. Regarding the presence of WSL and %SML, the NaF group obtained lower values (p<0.05), while TiF4 and CPP-ACPF were similar (p>0.05). SEM demonstrated that fluoride-free groups had a larger surface dissolution. Conclusion: Fluoridated groups including solutions and CPP-ACPF were more effective than CPP-ACP in reducing enamel demineralization around orthodontic brackets after a single application.

RESUMO Objetivo: Avaliar in-vitro o efeito de uma aplicação única de cremes dentais de CPP-ACP e diferentes soluções fluoretadas na prevenção da cárie dentária ao redor de braquetes ortodônticos Material e Métodos: O conjunto dentes/braquetes (n=65) foi imerso em saliva artificial (1h em 37°C) randomizado e submetido a tratamento único (100µL; 1 min) de emulsão de fosfopeptídeo de caseína-fosfato de cálcio amorfo (CPP-ACP) e CPP-ACP associado ao flúor (CPP-ACPF); soluções de tetrafluoreto de titânio (TiF4) e fluoreto de sódio (NaF); e ausência de tratamento (GC). Biofilmes multiespécie (5 x 105 CFU/mL) foram formados na presença de sacarose a 2%. Após 24h, o pH e a concentração de fluoreto solúvel total (FST) foram analisados pelo meio de cultura. Foram avaliadas a presença de lesões de mancha branca (LMB), por meio da análise de macroscopia visual, e a porcentagem de perda de dureza (%PD). Também foi verificada a topografia do esmalte, usando microscopia eletrônica de varredura (MEV). Os dados foram analisados pelos testes Qui-quadrado, Kruskal-Wallis e Mann-Whitney (p < 0,05). Resultados: Os compostos contendo flúor levaram a uma redução do pH menor do que o CPP-ACP e GC (p<0,05). Houve diferença no FST entre os grupos (p <0,05), sendo TiF4> NaF > CPP-ACPF > CPP-ACP > GC. Quanto à presença de LMB e à %PD, o grupo NaF obteve os menores valores (p<0,05), enquanto TiF4 e CPP-ACPF foram semelhantes (p> 0,05). A MEV demonstrou que os grupos sem flúor tiveram uma dissolução superficial maior. Conclusão: Os grupos fluoretados, incluindo soluções e CPP-ACPF, foram mais eficazes do que o CPP-ACP sem flúor na redução da desmineralização do esmalte ao redor dos braquetes ortodônticos após uma única aplicação.

ABSTRACT Introduction: Surface treatment is an important technique to increase adhesion between implants and bones, improving its mechanical characteristics and consequently the patient’s comfort. Objectives: Ni-Cr alloys were the object of study in this work, with the purpose of analyzing and evaluating the effect of thin films deposition of titanium nitride via plasma, on its surface and comparing with cathodic cage (CC) and hollow cathode (HC) methods, for dental applications. Methods: Eighteen samples were prepared and the experiment was conducted in two steps: the pre-sputtering (1h, 350 °C, gases: Ar and H) and sputtering (4h, 450 °C, gases: Ar, Ni, and H). To characterize and compare the samples with those of reference, the Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Vickers Microhardness and wettability tests were used. Results: The results presented by SEM showed that during the surface treatment using CC, voids were formed, and using HC, the samples showed a more homogenous behavior. In microhardness tests, using a 25gf load, it was possible to observe that the HC method allowed an increase of 87% when compared to the reference and treated samples. Significance: Lastly, it can be concluded that both methods are suitable for Ni-Cr alloy surface treatment, and the HC technique, a method already used by dental professionals, presents better results due to the formation of a thicker film layer.

ABSTRACT Introduction: Titanium tetrafluoride (TiF4) is a fluoride compound that, when is applied over enamel, promotes a protection against demineralization through a titanium dioxide (TiO2) acid-resistant coat. Objectives: This study sought to verify the hypothesis that a single application of 4% TiF4 increases the resistance of enamel to dental demineralization in orthodontic patients. Materials and Methods: This controlled clinical trial followed CONSORT guidelines and investigated the prevention of enamel demineralization, fluoride retention, and the presence of a Ti layer after TiF4 application on banded teeth exposed to clinical cariogenic biofilm. Forty premolars were divided into a control group (CG; n = 20) and a test group (TG; n = 20). Teeth from both groups received prophylaxis and orthodontic bands with a cariogenic locus. In the TG, all teeth additionally underwent aqueous 4% TiF4 solution application after prophylaxis before being banded. After one month, teeth from both groups were extracted and prepared to assess the microhardness, fluoride retention, and evaluation of the Ti coating over the enamel surface. All data were analyzed with a paired Student’s t-test (p<0.05). Results: Enamel microhardness and fluoride uptake were higher in TG than in CG, while the Ti layer could be seen over TG teeth that received TiF4 application. Conclusion: Under clinical circumstances, the 4% aqueous TiF4 solution was effective in preventing enamel mineral loss through increasing the enamel resistance to dental demineralization, enhancing its microhardness and fluoride uptake, and forming a Ti coat.

RESUMO Introdução: O tetrafluoreto de titânio (TiF4) é um composto fluoretado que, quando aplicado sobre o esmalte dentário, promove uma proteção contra desmineralização, por meio da formação de uma camada ácido-resistente de dióxido de titânio (TiO2). Objetivos: O presente estudo buscou verificar a hipótese de que uma única aplicação de TiF4 a 4% aumenta a resistência do esmalte dentário à desmineralização, em pacientes ortodônticos. Material e Métodos: Esse ensaio clínico controlado seguiu as diretrizes do CONSORT e investigou a prevenção da desmineralização do esmalte, retenção de flúor e a presença de uma camada de titânio após a aplicação do TiF4 em dentes bandados expostos ao biofilme cariogênico clínico. Quarenta pré-molares foram divididos em dois grupos: controle (GC; n = 20) e teste (GT; n = 20). Dentes de ambos os grupos receberam profilaxia e bandas ortodônticas com nicho cariogênico. No GT, todos os dentes também foram submetidos a aplicação de solução aquosa de TiF4 4 após profilaxia, antes de serem bandados. Após um mês, os dentes de ambos os grupos foram extraídos e preparados para avaliar a microdureza, retenção de flúor e avaliação da camada de titânio sobre a superfície do esmalte. Todos os dados foram analisados pelo teste t pareado (p<0,05). Resultados: A microdureza do esmalte e a absorção de flúor foram mais elevadas no GT do que no GC, enquanto uma camada de titânio pôde ser observada sobre os dentes do GT, que receberam aplicação TiF4. Conclusão: Em circunstâncias clínicas, a solução de TiF4 a 4% foi eficaz na prevenção da perda mineral do esmalte, por meio do aumento da resistência à desmineralização dentária, aumentando sua microdureza e absorção de flúor, e formando uma camada protetora de titânio.

ABSTRACT Purpose: This research presents a multicriteria benchmarking participatory model able to classify Federal Higher Education Institutions (FHEIs) into three levels of process management maturity. Design/methodology/approach: The research was conducted into three stages: (i) assessment model development using the Delphi technique, (ii) data collection through a self-assessment process, and (iii) classification of the FHEIs using PROMSORT. Findings: The results showed that, regardless of the adoption of an optimistic or pessimistic perspective, most FHEIs (51.6% in the optimistic perspective and 54.8% in the pessimistic one) were classified as regular. It is also noteworthy that approximately 80% of the research participating FHEIs maintained their classifications in the sensitivity analysis. Among the six alternatives that presented classification variations, only three varied significantly, confirming the results obtained stability. Research limitations/implications: The use of a participatory approach promotes a consistent benchmark in terms of indicators and metrics to measure performances. Practical implications: PROMSORT provided flexibility to the model, since it is possible to modify the parameters and thresholds in order to adjust the model strictness. Originality/value: The development of a model through which the Federal Higher Education Institutions (FHEIs) can be continually evaluate their process management maturity level.

RESUMO Objetivo: Esta pesquisa apresenta um modelo participativo de benchmarking multicritério capaz de classificar as Instituições Federais de Ensino Superior (IFES) em três níveis de maturidade de gestão de processos. Desenho/metodologia/abordagem: A pesquisa foi conduzida em três estágios: (i) construção do modelo de avaliação utilizando a técnica Delphi, (ii) coleta de dados através de um processo de autoavaliação, e (iii) classificação das IFES utilizando o PROMSORT. Resultados: Os resultados mostraram que, independentemente da adoção de uma perspectiva otimista ou pessimista, a maioria das IFES (51,6% na perspectiva otimista e 54,8% na pessimista) foram classificadas como regulares. Também é notável que aproximadamente 80% das IFES participantes da pesquisa mantiveram suas classificações na análise de sensibilidade. Entre as seis alternativas que apresentaram variações de classificação, apenas três variaram significativamente, confirmando os resultados obtidos em termos de estabilidade. Limitações/implicações da pesquisa: O uso de uma abordagem participativa promove uma referência consistente em termos de indicadores e métricas para medir o desempenho. Implicações práticas: O PROMSORT proporcionou flexibilidade ao modelo, uma vez que é possível modificar os parâmetros e limiares a fim de ajustar o rigor do modelo. Originalidade/valor: Desenvolvimento de um modelo através do qual as Instituições Federais de Ensino Superior (IFES) podem avaliar continuamente seu nível de maturidade em gestão de processos.

ABSTRACT For a long time, the provenance of the specimens used by Frederick Smith to describe the species of stingless bees from Brazil remained a mystery. The recent digitalization of 19th century publications has made possible to trace the origin of the material brought to the London International Exhibition of 1862 by the Brazilian delegation. We document that the bee specimens showed at the International Exhibition, and that served as type material of the species described by Smith, were collected by Manuel Ferreira Lagos, head of the Zoology section of the Comissão Científica de Exploração, during their stay in Ceará, from 1859 to 1861. Even if late, it is important to give due credit to the Comissão Científica de Exploração, and more specifically to Lagos, for the contribution to the knowledge of the stingless bee fauna from Brazil.

Abstract The aim of this study was to develop and analyze the psychometric properties of the Brazilian Version of Lay Person's Social Judgement about Cleft-lip Scale (B-LSojCleft-S). A standardized photograph of a 16-year-old girl was manipulated by using photo editing software, to simulate different cleft-lip situations. The cleft-free image was used as a control. The researchers structured an initial questionnaire that was evaluated by experts and a sample of the target population to evaluate the construct. After analysis by the researchers, a final version of the B-LSojCleft-S containing 14 items was generated. Each answer was awarded score from 1 to 3 points, yielding a total score of 14 to 42 points. Higher scores represented better social judgements. The B-LSojCleft-S was applied online to 103 test participants and 73 retest participants with an interval of 20 days between application. Aspects of acceptability, discriminant property, internal consistency, reliability and construct validity were evaluated. Construct validity was assessed using the Friedman test (p < 0.05). Reliability was determined using an intraclass correlation coefficient > 0.70, and internal consistency using Cronbach's alpha > 0.81. The B-LSojCleft-S showed high acceptability, strong discriminant property, excellent internal consistency and reliability, but had a floor and ceiling effect. The instrument reached valid and reliable scores and had acceptable psychometric properties to evaluate the social judgments of lay persons about different cleft lip situations in a Brazilian population.

ABSTRACT Objective: To evaluate the mechanical properties of mini-implants (MIs) manufactured from stainless steel and compare them with conventional titanium-aluminum-vanadium alloy MIs. Material and Methods: The following groups were formed: G1 (n=24), 8×1.5 mm steel MIs; G2 (n=24), 12×2.0 mm steel MIs; and G3 (n=24), 10×1.5 mm titanium MIs. The 72 MIs were inserted in the infra zygomatic crest region of the maxilla and retromolar trigone in the jaw of 10 pigs. Pull-out, insertion torque, fracture and percussion tests were performed in order to measure the tensile strength, primary stability and fracture strength of MIs. A digital torque gauge was used to measure insertion and fracture torque, a universal mechanical testing machine was used for pull-out testing and a periotest device was used to measure the micromovement of MIs. For morphological and MI component evaluation, scanning electron microscopy (SEM) was performed. D'Agostino & Pearson, Kruskal-Wallis, and Dunn post-hoc and normality tests were used. Results: G2 insertion and fracture torques were significantly higher than G1 and G3 insertion and fracture torques (p<0.05). The pull-out and percussion tests presented similar values among the groups. SEM revealed that the fracture point was predominantly on the fourth thread for steel MIs (G1 and G2) and on the seventh thread for titanium-aluminum-vanadium MIs (G3). Conclusion: The mechanical properties of stainless steel MIs are superior to those of titanium-aluminum-vanadium alloy MIs.

Abstract Introduction The deficiency of ADA2 (DADA2) is a rare autoinflammatory disease provoked by mutations in the ADA2 gene inherited in a recessive fashion. Up to this moment there is no consensus for the treatment of DADA2 and anti-TNF is the therapy of choice for chronic management whereas bone marrow transplantation is considered for refractory or severe phenotypes. Data from Brazil is scarce and this multicentric study reports 18 patients with DADA2 from Brazil. Patients and methods This is a multicentric study proposed by the Center for Rare and Immunological Disorders of the Hospital 9 de Julho - DASA, São Paulo - Brazil. Patients of any age with a confirmed diagnosis of DADA2 were eligible for this project and data on clinical, laboratory, genetics and treatment were collected. Results Eighteen patients from 10 different centers are reported here. All patients had disease onset at the pediatric age (median of 5 years) and most of them from the state of São Paulo. Vasculopathy with recurrent stroke was the most common phenotype but atypical phenotypes compatible with ALPS-like and Common Variable Immunodeficiency (CVID) was also found. All patients carried pathogenic mutations in the ADA2 gene. Acute management of vasculitis was not satisfactory with steroids in many patients and all those who used anti-TNF had favorable responses. Conclusion The low number of patients diagnosed with DADA2 in Brazil reinforces the need for disease awareness for this condition. Moreover, the absence of guidelines for diagnosis and management is also necessary (t).

In this paper, we analyze the motion of a falling Slinky, starting from rest and initially suspended from one of its ends. It is well-known that under these conditions, the Slinky moves in an unusual way: its lower end remains at rest until the upper end collides with it – as if gravity were being challenged! We conducted a literature review and identified that the most widely disseminated explanation for this levitation phenomenon of the Slinky’s base during the Slinky’s fall relies on the concept of information (and does not seem to please many). We show that such a phenomenon can be explained – and reproduced through a computer simulation using a simple model – without the notion that “there is a finite time for the information that the Slinky was released at its top to reach its bottom”.

Neste artigo, analisamos o movimento de uma mola Slinky em queda, a partir do repouso, inicialmente suspensa em uma de suas extremidades. É bem conhecido que, nessas condições, a Slinky se move de forma inusitada: sua extremidade inferior fica em repouso até a chegada da extremidade superior – como se a gravidade estivesse sendo desafiada! Fizemos uma revisão da literatura, e identificamos que a explicação mais amplamente divulgada para esse fenômeno de levitação aparente da base da Slinky em queda faz uso do conceito de informação (e parece não agradar a muitos). Mostramos que tal fenômeno pode ser explicado – e reproduzido através de uma simulação computacional, com um modelo simples – sem a ideia de que “leva um tempo para a informação de que a Slinky foi solta, em sua extremidade superior, chegar à extremidade inferior”.

Abstract The study analyzed the clarity of publications on human papillomavirus (HPV) in the Instagram profiles of official Brazilian health agencies. An infodemiological study analyzed publications on HPV in the 81 Instagram profiles selected from the Health Ministry, States’ Health Departments, and dental councils and associations. The following data were collected: classification of content, type of profiles, type of media, how the content was addressed, number of posts, frequency, likes, comments, viewings, and hashtags, and how the HPV vaccine was addressed. The clarity of the educational publications was assessed using the Brazilian version of the Clear Communication Index (BR-CDC-CCI). Data analysis was performed with Spearman’s correlation and the Mann-Whitney test (p < 0.05). A total of 504 publications on HPV were found. The average number of likes was 528.3 (SD = 2388.2) and the average BR-CDC-CCI score was 67.1 (SD = 14.1). The quality and clarity of the information was considered adequate (BR-CDC-CCI score ≥ 90) in 6.9% of the publications. A weak positive correlation was found between the number of likes and both the BR-CDC-CCI score (r = 0.195) and number of posts (r = 0.124). Publications from the Health Ministry had a significantly higher BR-CDC-CCI score (72.9) compared to the other profiles analyzed (p = 0.01). Most publications concerned government actions, had low engagement, and written educational information was of low clarity and quality. However, the effort to reach the population was evident, with an increase in publications over the years.

ABSTRACT Objective: To assess the impact of COVID-19 on the morbidity and mortality associated with drug-resistant tuberculosis (DR-TB). Methods: A comprehensive review of articles published in international databases since December 2019 was conducted. The findings are presented in a narrative format, supplemented with tables, diagrams, and a map created using ArcGIS software. Results: Thirty-five studies were selected, highlighting the significant consequences of COVID-19 on TB and DR-TB treatment progress. Four main thematic areas were identified: Clinical and epidemiological aspects of the interaction between COVID-19 and DR-TB; Management of physical resources and the team; Challenges and circumstances; Perspectives and possibilities. Conclusions: This study revealed that the COVID-19 pandemic significantly negatively impacted the control of long-standing diseases like TB, particularly in the context of morbidity and mortality related to DR-TB.

RESUMEN Objetivo: Evaluar el impacto de COVID-19 en la morbilidad y mortalidad asociada con la tuberculosis resistente a medicamentos (DR-TB). Métodos: Se realizó una revisión integral de artículos publicados en bases de datos internacionales desde diciembre de 2019. Los hallazgos se presentaron de forma narrativa, complementados con tablas, diagramas y un mapa creado con el software ArcGIS. Resultados: Se seleccionaron 35 estudios que destacaron las consecuencias significativas de COVID-19 en el progreso del tratamiento de la TB y la DR-TB. Se identificaron cuatro áreas temáticas principales: “Aspectos clínicos y epidemiológicos de la interacción entre COVID-19 y DR-TB”, “Gestión de recursos físicos y del equipo”, “Desafíos y circunstancias” y “Perspectivas y posibilidades”. Conclusiones: Este estudio reveló que la pandemia de COVID-19 tuvo un impacto negativo significativo en el progreso del control de enfermedades antiguas como la TB, especialmente en el contexto de la morbilidad y mortalidad relacionada con la DR-TB.

RESUMO Objetivo: Avaliar o impacto da COVID-19 na morbimortalidade associada à tuberculose resistente a medicamentos (DR-TB). Métodos: Realizou-se uma revisão abrangente de artigos publicados em bases de dados internacionais a partir de dezembro de 2019. As evidências foram apresentadas de maneira narrativa, com o suporte de tabelas, diagramas e um mapa elaborado no software ArcGIS. Resultados: Foram selecionados 35 estudos que destacaram as consequências significativas da COVID-19 nos avanços no tratamento da TB e da DR-TB. Quatro áreas temáticas foram identificadas: “Aspectos clínicos e epidemiológicos da interação entre COVID-19 e DR-TB”, “Gestão de recursos físicos e da equipe”, “Desafios e circunstâncias” e “Perspectivas e potencialidades”. Conclusões: Este estudo evidenciou que a pandemia de COVID-19 teve um impacto negativo significativo na progressão do controle de uma doença ancestral como a TB, especialmente no contexto da morbimortalidade por DR-TB.

ABSTRACT Introduction: Artificial Intelligence (AI) is a tool that is already part of our reality, and this is an opportunity to understand how it can be useful in interacting with patients and providing valuable information about orthodontics. Objective: This study evaluated the accuracy of ChatGPT in providing accurate and quality information to answer questions on Clear aligners, Temporary anchorage devices and Digital imaging in orthodontics. Methods: forty-five questions and answers were generated by the ChatGPT 4.0, and analyzed separately by five orthodontists. The evaluators independently rated the quality of information provided on a Likert scale, in which higher scores indicated greater quality of information (1 = very poor; 2 = poor; 3 = acceptable; 4 = good; 5 = very good). The Kruskal-Wallis H test (p< 0.05) and post-hoc pairwise comparisons with the Bonferroni correction were performed. Results: From the 225 evaluations of the five different evaluators, 11 (4.9%) were considered as very poor, 4 (1.8%) as poor, and 15 (6.7%) as acceptable. The majority were considered as good [34 (15,1%)] and very good [161 (71.6%)]. Regarding evaluators’ scores, a slight agreement was perceived, with Fleiss’s Kappa equal to 0.004. Conclusions: ChatGPT has proven effective in providing quality answers related to clear aligners, temporary anchorage devices, and digital imaging within the context of interest of orthodontics.

RESUMO Introdução: A Inteligência Artificial (IA) é uma ferramenta que já faz parte de nossa realidade, e esta é uma oportunidade de entendermos como ela pode ser útil na interação com os pacientes e no fornecimento de informações valiosas sobre Ortodontia. Objetivo: O objetivo deste estudo foi avaliar a precisão do ChatGPT em responder a perguntas sobre Alinhadores transparentes, Dispositivos de ancoragem temporária, e Imagens digitais em Ortodontia. Métodos: 45 perguntas e respostas foram geradas pelo ChatGPT 4.0 e analisadas separadamente por cinco ortodontistas que, de forma independente, avaliaram a qualidade das informações fornecidas, usando uma escala de Likert, na qual pontuações mais altas indicavam uma maior qualidade das informações (1 = muito ruim; 2 = ruim; 3 = aceitável; 4 = bom; 5 = muito bom). Aplicou-se o teste H de Kruskal-Wallis (p < 0,05) e comparações pareadas post-hoc com correção de Bonferroni. Resultados: Das 225 avaliações dos cinco avaliadores diferentes, 11 (4,9%) foram consideradas como muito ruins, 4 (1,8%) como ruins, e 15 (6,7%) como aceitáveis. A maioria foi considerada boa [34 (15,1%)] ou muito boa [161 (71,6%)]. Com relação às pontuações dos avaliadores, percebeu-se uma leve concordância, com o Kappa de Fleiss igual a 0,004. Conclusões: O ChatGPT mostrou eficácia em fornecer respostas de qualidade para questões relacionadas a Alinhadores transparentes, Dispositivos de ancoragem temporária e Imagens digitais.