ABSTRACT Only 14 cases of extraskeletal myxoid chondrosarcoma (EMC) of the vulva have been documented in the literature. We report a case of a 63-year-old woman with EMC of the vulva confirmed by both EWSR1 and NR4A3 fluorescence in situ hybridization, the latter of which is a more specific probe for this entity. The unusual location of this tumor of prominent myxoid morphology gave rise to a wide differential diagnosis, which necessitated thorough histologic evaluation and confirmatory ancillary testing in the form of immunohistochemistry and cytogenetic studies. This article aims to review extraskeletal myxoid chondrosarcoma of the vulva and various diagnostic clues to help differentiate it from its histologic mimics. This is the fifth case of vulvar EMC in the literature with confirmation of a NR4A3 gene rearrangement.

Plasma position control is one of the important issues in the design and operation of tokamak fusion research device. Since a tokamak is basically an electrical system consisting of power supplies, coils, plasma and eddy currents, a model in which these components are treated as an electrical circuits is used in designing Damavand plasma position control system. This model is used for the simulation of the digital control system and its parameters have been verified experimentally. In this paper, the performance of a high-speed digital controller as well as a simulation study and its application to the Damavand tokamak is discussed.

We have performed experimental comparative studies of the x-ray and neutron emission generated by the new Filippov-type plasma focus "Dena", (90 kJ, 25 kV, 288muF) in the pressure range of 0.6-1 torr. Time-integrated and time-resolved detectors, together with an x-ray pin-hole camera, along with a Be filter of 10mum thickness have been used. For a working gas of neon and a at insert anode, the maximum soft and hard x-rays (SXR-HXR) yield obtained was 16 V and 1.5 V/shot over a 4pi solid angle, respectively, for a charging voltage range of 16-20 kV. As for the argon gas, the similar results such as 3.5 and 2 V/shot have been found, leading to a total conversion eAciency of x-ray emission of 0.09 % (for neon) and 0.03 % (for argon) of the stored energy. These efficiencies have been improved by the employment of a conic insert anode up to 0.4% and 0.1%. With deuterium puffing gas and a at insert anode, the maximum emission yield has been found to be 2.5 V for SXR and 1 V for HXR/shot which produce an ultimate emission profile width (FWHM) of 70-90 ns for x-rays and neutrons, giving rise to a maximum neutron yield of 1.2 × 10(9). Nevertheless, the maximum yield has been increased up to 5.5 times with the conic insert anode. In order to increase the neutron yield, we have introduced a krypton admixture to the deuterium filling gas and found that, for a krypton pressure of about 0.1 torr, the neutron yield increases by a factor of 3.5 for the flat insert and 1.5 for the conic insert anodes.