In this study an analytical method, based on gas chromatography with flame ionization detection, using a short column and response factor (GCSCRF), was validated for the quantification of fatty acid alkyl esters (methylic or ethylic). During the validation process, the proposed method was employed to analyze twenty samples of fatty acid methyl esters and fatty acid ethyl esters. Biodiesel samples were produced from soybean oil and the validated method was found to be selective, being able to separate and identify every ester species present in the samples according to its carbon number. When the method was submitted to some variations in the sample preparation procedure, it remained robust. Limits of detection and quantification were 6.76 and 20.4 mg mL-1, respectively. The suggested method also showed great precision when successive analyses were carried out for different analysts, with standard deviation (SD) 0.6 for repeatibility and relative standard deviation (RSD) percentage 7.3% for intermediate precision, excellent accuracy when compared to other reference methods (EN 14103 and high-performance liquid chromatography with ultraviolet dection (HPLC-UV)) and recovery studies.

The oxidative polymerization of linseed oil was investigated comparing the classical catalysts cobalt(II) 2-ethylhexanoate and manganese(II) 2-ethylhexanoate and their derivatives modified by the presence of chelating nitrogen ligands, i.e., 2,2'-bipyridyl, 2-(acetyl-2,6-diisopropylphenylimine)-pyridine and [N-(2,6-diisopropylphenyl)imine]acenaphthoquinone. The suitable stoichiometries between the two precursor complexes with the three ligands were determined by UV-visible spectroscopy. All complexes were characterized by infrared spectroscopy, and one complex was characterized also by X-ray diffraction. The apparent kinetic constants of oxidative polymerization of linseed oil was determined, for each catalytic system, via the periodic measurements of the oil viscosity during the oxidation reaction. The results indicated that the modifications of the classical two complexes with the chelating nitrogen ligands improved the catalytic efficiency at least to the manganese complex.

O processo de armazenamento refrigerado em câmaras contribui, em grande parte, para a qualidade e a longevidade dos produtos. Nos últimos anos, têm-se intensificado os estudos de estratégias de controle com a finalidade de diminuir a variação da temperatura dentro da câmara de armazenamento e de reduzir o consumo de energia elétrica. Neste trabalho, foi desenvolvido um sistema para aquisição de dados e controle do processo, em linguagem LabVIEW, para ser aplicado no sistema de refrigeração de uma câmara frigorífica de 30m³. A utilização da instrumentação e do aplicativo desenvolvido possibilitou a realização de experimentos científicos, com o objetivo de estudar o comportamento dinâmico do sistema de refrigeração, comparar o desempenho das estratégias de controle da máquina térmica, tanto em função da temperatura controlada, quanto ao consumo de energia elétrica. Neste sistema, foram testadas as estratégias de controle liga-desliga, PID e fuzzy. Em relação ao consumo de energia elétrica, o controlador fuzzy obteve o melhor resultado, economizando 10% em relação às outras estratégias testadas.

The process of cold storage chambers contributes largely to the quality and longevity of stored products. In recent years, it has been intensified the study of control strategies in order to decrease the temperature change inside the storage chamber and to reduce the electric power consumption. This study has developed a system for data acquisition and process control, in LabVIEW language, to be applied in the cooling system of a refrigerating chamber of 30m³. The use of instrumentation and the application developed fostered the development of scientific experiments, which aimed to study the dynamic behavior of the refrigeration system, compare the performance of control strategies and the heat engine, even due to the controlled temperature, or to the electricity consumption. This system tested the strategies for on-off control, PID and fuzzy. Regarding power consumption, the fuzzy controller showed the best result, saving 10% when compared with other tested strategies.

The use of biomass as raw-material for obtaining chemicals, polymers and fuels is emerging as a clever alternative solution for the increasing energy demand, environmental awareness and petroleum shortage. In this work, some attempts in order to develop catalytic systems suitable for triglyceride transformation into fuels, polymers and intermediates are reviewed.