Disposal of plastics into the environment has been one of the major problems for the environment. The accumulation of polystyrene (PS) occurs in an accelerated way and, therefore, its reuse is challenging. Polystyrene nanocomposites impregnated with Ag nanoparticles (PS/AgNP) are generated from polystyrene residues and can be applied in the catalytic and plasmonic photo-catalytic reduction of phenolic compounds such as p-nitrophenol (PNP) to p-aminophenol (PAP). The AgNP were synthesized by a reverse micelle method resulting in nanoparticles with sizes in a range of 31.1-34.0 nm. The organocolloid was characterized by UV Vis and dynamic light scattering (DLS), demonstrating the preparation of spherical nanoparticles. The preparation of the PS/AgNP, obtained using a thermally induced phase separation method (TIPS), was confirmed by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), laser-induced breakdown spectroscopy (LIBS), and Fourier transform visible infrared spectroscopy (FTIR). Nanocomposites showed impressive performance in the catalytic and plasmonic photocatalytic reduction under blue light irradiation, reaching up to 98% conversion, being a promising material for wastewater treatment as well as other various environmental issues. We used blue light to observe the plasmonic effect of silver nanoparticles, and no previous reports of this composite for PNP reduction using blue light photocatalysis were found.

Resumo Os terpenóides, também chamados terpenos ou isoprenóides, são uma família de produtos naturais encontrados em todos os organismos vivos. Muitas plantas são produtoras destes metabolitos secundários, que constituem uma grande parte dos óleos essenciais. Uma das características mais importantes é que os compostos são voláteis, têm odor e podem ser utilizados numa variedade de aplicações em diferentes segmentos industriais ou na medicina tradicional. O Brasil tem uma flora rica e diversificada que pode ser utilizada como fonte de pesquisa para a obtenção de novas moléculas. Dentro desta flora, vale a pena mencionar a Caatinga como um bioma exclusivamente brasileiro que possui plantas adaptadas a uma série de condições climáticas e, portanto, um armazém de compostos a serem descritos. As infecções fúngicas são doenças cada vez mais comuns, devido a isso existe uma grande procura de novos agentes com baixa toxicidade e efeitos secundários. Os cientistas devem procurar novas moléculas que exibam atividade antifúngica para o desenvolvimento de novos medicamentos contra as infecções fúngicas. Esta revisão visa analisar dados científicos dos principais estudos publicados que descrevem o uso de terpenóides e as suas aplicações biológicas como antifúngicos. isoprenóides vivos secundários essenciais voláteis tradicional portanto descritos comuns antifúngicos

Abstract Terpenoids, also named terpenes or isoprenoids, are a family of natural products found in all living organisms. Many plants produce terpenoids as secondary metabolites, and these make up a large part of essential oils. One of most important characteristic is that the compounds are volatile, have odor and can be used in a variety of applications in different industrial segments and traditional medicine. Brazil has a rich and diverse flora that can be used as a source of research for obtaining new molecules. Within the Brazilian flora, it is worth mentioning the Caatinga as an exclusively Brazilian biome where plants adapt to a specific series of weather conditions and therefore become a great storehouse of the terpenoid compounds to be described herein. Fungal infections have become increasingly common, and a great demand for new agents with low toxicity and side effects has thus emerged. Scientists must search for new molecules exhibiting antifungal activity to develop new drugs. This review aims to analyze scientific data from the principal published studies describing the use of terpenes and their biological applications as antifungals. Terpenoids isoprenoids organisms metabolites oils volatile medicine herein common emerged drugs antifungals

ABSTRACT Problems of optimal reliability and redundancy allocation are not new. However, the literature describes two isolated situations, either when redundancy allocation is the target and the reliability metrics of the components are known, or focusing on the reliability allocation, that demands the metrics to be known in advance and the use of some optimization approach. In the present paper, we consider a combined situation, i.e., when both situations must be considered together. To guide the allocation process, we developed a cost function that considers the costs of acquisition, development and/or improvement as a function of monetary effort, along with the reliability target and expected failure costs. The results considering two classical test problems in the literature demonstrated the efficacy of the proposed approach to deal with similar situations.

Resumo Três experimentos foram realizados com diferentes tamanhos de partícula de ração para o desempenho zootécnico, taxa de aprovação e digestibilidade aparente de tambaqui juvenil (Colossoma macropomum). No primeiro, foram utilizados 200 juvenis e distribuídos em 20 tanques (220 L), 10 peixes por unidade (quatro repetições). O sistema experimental utilizado para registrar o tempo de passagem foi composto por cinco incubadoras com 200 L. No segundo, 75 juvenis foram utilizados por 55 dias (três repetições). No terceiro, 75 juvenis foram utilizados e distribuídos em cinco incubadoras de 200 L. Todos os experimentos foram realizados aleatoriamente. Diferentes tratamentos de comportamento linear foram observados para digestibilidade aparente da proteína bruta; e o menor tamanho de partícula (150 μm) apresentou melhor digestibilidade dos resultados. menor tamanho de partícula do milho apresentou melhores resultados, afetou o desempenho de crescimento de tambaquis e a digestibilidade aparente da proteína bruta e extrato etéreo. Portanto, recomenda-se o uso de um tamanho de partícula de 150 μm de milho para o tambaqui.

Abstract Three experiments were done with different particle sizes of corn feed on its zootechnical performance, passing rate and apparent digestibility of juvenile tambaqui (Colossoma macropomum). In the first, 200 juveniles were used and distributed in 20 tanks (220 L), 10 fish per unit (four replicates). The experimental system used to record passage time was composed of five incubators with 200 L. In the second, 75 juveniles were used per 55 days (three replications). In the third, 75 juveniles were used and distributed in five incubators of 200 L. All experiments were performed randomly. Different linear behavior treatments were observed for apparent digestibility of crude protein; and the smaller particle size (150 μm) had better results digestibility. smaller particle size of the corn had better results, affected the growth performance of tambaqui and the apparent digestibility of crude protein and ether extract. Thus, is recommended that a particle size of 150 μm of corn be used for tambaqui.

Abstract This study evaluated some biological activities of extracts from Abuta selloana. The gastroprotective potential was determined against ethanol/HCl- and indomethacin-induced gastric ulcers, whereas the antinociceptive effect was evaluated by acetic acid-induced abdominal contortions in mice. The cytotoxicity activity was measured against human cancer cell lines: U251 (glioma), MCF-7 (breast cancer) and NCI-H460 (lung cancer). The radical scavenger potential was verified; and preliminary phytochemical analyses were performed. The phytochemical screening revealed higher levels of phenolic compounds in all extracts. Moreover, the methanolic extract from pulp fruit (MEPu), peel fruit (MEPe), branches (MEB) and leaves (MEL) scavenged the DPPH radical at 100 µg/mL. Besides, only MEL presented GI50 < 30 µg/mL in all tested cells. Besides, MEPu, MEPe, MEB or MEL at 10 mg/kg (i.p) reduced the abdominal contortions at 47.22%, 63.31%, 84.59% and 37.76%, respectively. The MEPu, MEPe, MEB and MEL reduced the ethanol/HCl- and indomethacin- induced ulcer at 250 mg/kg (p.o). In conclusion, A. selloana had interesting biological activities; presenting the leaves as a promising source for compounds with cytotoxic potential, however, further studies should be performed to confirm its antitumoral activity. Besides, the whole plant can be an important source of bioactive compounds associated with gastroprotective and antinociceptive properties.

Abstract The main goal of this research was to study the adsorptive capacity of an organophilic clay for the removal of textile dye Nylosan blue B113 and its further application in real textile effluent (RTE) treatment. The used clay known as Bofe was originated in the township of Boa Vista, State of Paraíba, Northeast of Brazil. Initially, the material was dried and powdered. Subsequently, the organophilic clay was synthesized by insertion of hexadecyltrimethylammonium bromide. Furthermore, the clay was characterized using the following analyses: cation exchange capacity (CEC), X-ray diffractometry (XRD), surface area analysis, and pH of point of zero charge (pHpzc). Then, batch adsorption systems were performed along with equilibrium/kinetic/thermodynamic studies. At last, keeping the same weight/volume ratio, a solution of real textile effluent was treated. Results showed CEC of 54.40 mmol/100g, lamellar expansion from 1.69 to 2.01 nm, maximum adsorptive capacity of 50 mg.g-1, and chemical oxygen demand (COD) removal of 74% (RTE).

Resumo Filmes finos multicamadas de TiO2-CeO2 foram depositados pelo método de spin coating e calcinados a 500 e 700 °C. Os filmes finos foram caracterizados por difração de raios-X (DRX), microscopia eletrônica de varredura por emissão de campo (MEV-FEG), microscopia de força atômica (MFA) e espectroscopia de reflectância difusa. As propriedades fotocatalíticas foram estimadas variando a concentração do corante azul de metileno (AM) quando iluminado por radiação UV. Os padrões de DRX mostraram que as temperaturas de 500 e 700 °C foram efetivas para obter as fases de TiO2 e CeO2. A diferença na homogeneidade dos filmes de TiO2 e CeO2 foi evidente nas imagens de MFA, onde os filmes apresentaram rugosidade média de 2,0 e 5,3 nm, respectivamente. Filme fino de TiO2-CeO2 obtido a 700 °C apresentou a melhor atividade fotocatalítica, reduzindo a concentração de AM em aproximadamente 80%, enquanto os filmes de CeO2 e TiO2 obtidos a 700 °C reduziram apenas 20% e 29%, respectivamente. O teste de reutilização mostrou que os filmes finos mantiveram sua atividade após 4 ciclos, não havendo necessidade de tratamento térmico, indicando ser um fotocatalisador imobilizado com alta eficiência na degradação do corante orgânico.

Abstract TiO2-CeO2 multilayer thin films were deposited by the spin coating method and calcined at 500 and 700 °C. Thin films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), and diffuse reflectance spectroscopy. Photocatalytic properties were estimated by varying the concentration of the methylene blue dye (MB) when illuminated by UV radiation. The XRD patterns showed that the temperatures of 500 and 700 °C were effective to obtain TiO2 and CeO2 phases. The difference in the homogeneity of TiO2 and CeO2 films was evident in the AFM images, where the films showed an average roughness of 2.0 and 5.3 nm, respectively. The CeO2-TiO2 thin film obtained at 700 °C showed the best photocatalytic activity, reducing the concentration of MB by approximately 80%, while the CeO2 and TiO2 films obtained at 700 °C reduced only 20% and 29%, respectively. The reuse test showed that the thin films maintained their photocatalytic activity after 4 cycles, and there was no need for thermal treatment, indicating that it is an immobilized photocatalyst with high efficiency in the degradation of organic dyes.

RESUMO: Os dermatófitos são fungos que podem causar infecções superficiais da pele, cabelo e unhas em humanos e animais. As espécies de dermatófitos mais frequentemente isoladas dos cães e gatos afetados por micoses são Microsporum gypseum e principalmente Microsporum canis. O papel crucial durante o processo de infecção é a produção de enzimas extracelulares essenciais para a invasão e estabelecimento do agente patogênico no tecido do hospedeiro. O objetivo deste trabalho foi isolar dermatófitos de cães e gatos e avaliar o perfil enzimático dos isolados obtidos. Amostras de pelos e escamas epidérmicas foram coletadas de cães e gatos em instalações veterinárias em Recife/PE, e os isolados foram identificados com base nas características macroscópicas e microscópicas. A análise qualitativa das enzimas urease, protease, lipase, colagenase e fosfolipase foi avaliada a partir dos dermatófitos isolados. Durante 10 meses, um total de 106 animais, que compreendeu de 99 cães e sete gatos com sinais clínicos, independentemente do sexo e raça foram avaliados. Apenas oito animais foram confirmados com dermatofitose, principalmente cães (n=7), sendo seis afetados por M. canis e um por M. gypseum, a raça mais afetada foi Yorkshire (n=3). No entanto, apenas um gato foi confirmado com M. canis. Não foi observada predisposição relacionada ao sexo quanto à ocorrência de dermatofitose nos cães e gatos avaliados. Os dermatófitos isolados apresentaram perfis semelhantes para as enzimas urease, lipase, protease, fosfolipase e colagenase, característica importante em infecções patogênicas. O diagnóstico clínico destas zoonoses com base na confirmação microbiológica e uma compreensão dos mecanismos subjacentes é de grande importância para o tratamento e prevenção de doenças fúngicas em animais.

ABSTRACT: Dermatophytes are fungi that can cause superficial infections of the skin, hair and nails in man and animals. The most frequent dermatophyte species isolated from dogs and cats are Microsporum gypseum, most notably Microsporum canis. The crucial role during the infection process is the production of extracellular enzymes essential for the invasion and establishment of the pathogen in the host tissue. The objective of this research was to isolate dermatophytes from dogs and cats and evaluate the enzymatic profile of the isolates obtained. Hair samples and epidermal scales were collected from dogs and cats in veterinary facilities in Recife-PE, and the isolates were identified based on macroscopic and microscopic characteristics. The qualitative analysis of the enzymes urease, protease, lipase, collagenase and phospholipase was evaluated from the isolated dermatophytes. During 10 months, a total of 106 animals, comprising of 99 dogs and seven cats with clinical signs, regardless of sex and race were evaluated. Only eight animals were confirmed with dermatophytosis, mostly dogs (n=7), being six affected by M. canis and one by M. gypseum, the race most affected was Yorkshire (n=3). However, only one cat was confirmed with M. canis. No sex-related predisposition was observed regarding the occurrence of dermatophytosis in dogs and cats evaluated. Isolated dermatophytes showed similar profiles for the enzymes urease, lipase, protease, phospholipase and collagenase, important characteristic for pathogenic infections. The diagnosis of this zoonosis based on microbiological confirmation and a better understanding of the underlying mechanisms is of great importance for the treatment and prevention of fungal diseases in animals.

Abstract UASB reactors are a common technology for wastewater treatment. However, certain disadvantages must be considered. One of the disadvantages relates to the presence of dissolved gases, hydrogen sulfide and methane, in the effluent, which can potentially be released into the atmosphere. This can cause malodours and contribute to the greenhouse effect. In this perspective, this work investigated alternative techniques to minimize these disadvantages: air stripping inside the settling compartment; and a dissipation chamber immediately after the reactor outlet. Results achieved with the air stripping technique showed low removal efficiencies for methane, around 30%, and in the range of 40 to 60% for hydrogen sulfide. On the other hand, the removal efficiencies obtained with the dissipation chamber technique were much higher, consistently reaching 60% or more for both gases, plus a relatively lower exhaust flow. For the best operational condition tested, median removal efficiencies of 73 and 97% were observed for dissolved methane and dissolved sulfide, respectively.

Resumo Neste trabalho estudou-se a adição do poliestireno sulfonado produzido a partir de copos plásticos descartados como aditivo para argamassas. Foram analisadas argamassas com os teores de poliestireno de 0,0; 0,2; 0,6; 1,0 e 1,4% em relação à massa de cimento. A influência da adição do poliestireno sulfonado nas propriedades das argamassas foi avaliada através dos ensaios de índice de consistência, retenção de água, absorção de água, índice de vazios, módulo de elasticidade, resistência à compressão, resistência à tração na flexão, resistência potencial de aderência à tração e microscopia. O aumento no teor de poliestireno sulfonado reduziu o módulo de elasticidade da argamassa e, apesar da elevação da porosidade, houve uma redução da absorção de água por capilaridade. Em relação à argamassa sem aditivo, a argamassa modificada apresentou aumento na retenção de água e no índice de consistência, além de um grande aumento na resistência à tração na flexão e na resistência potencial de aderência à tração. O aumento significativo da resistência potencial de aderência à tração (214% com 1% de aditivo) destaca o potencial do material produzido como argamassa adesiva.

Abstract In this work, we studied the addition of sulfonated polystyrene produced from waste plastic cups as an admixture for mortars. Mortars were analyzed with polystyrene content of 0.0; 0.2; 0.6; 1.0 and 1.4% in relation to the cement mass. The influence of polystyrene on the mortars' properties was evaluated by the consistency index, water retention, water absorption, porosity, elasticity modulus, compressive strength, flexural strength, bond tensile strength and microscopy. The increase in the sulfonated polystyrene content decreased the elasticity modulus of the mortar and, despite higher porosity, there was a reduction of water absorption by capillarity. In relation to mortar without admixture, the modified mortar showed an increase in water retention and consistency index, and a large increase in flexural strength and bond tensile strength. The significant increase of bond tensile strength (214% with admixture 1%) highlights the potential of the produced material as an adhesive mortar.

Através do método dos precursores poliméricos foram sintetizadas amostras de Ca0,98Sr0,01X0,01TiO3 (X= Eu3+, Sm3+ ou Pr3+), que submetidas a diferentes tratamentos térmicos foram obtidas com níveis de ordem-desordem estrutural distintos. Os materiais sintetizados foram caracterizados por difração de raios X, confirmando a obtenção de um material homogêneo com estrutura perovsquita do tipo ortorrômbica. Essa caracterização permitiu ainda calcular o tamanho médio de cristalito das amostras, que varia em função do íon terra-rara presente. Os resultados da emissão fotoluminescente confirmaram a presença desse fenômeno óptico à temperatura ambiente e sua relação com o nível de ordem-desordem estrutural do sistema. A emissão fotoluminescente mais intensa ocorre nas amostras tratadas termicamente a 500 °C (independente do íon dopante), a variação do dopante influencia na intensidade da emissão devido à transferência de carga entre a matriz hospedeira e o íon terra-rara emissor, onde a amostra dopada com íon Pr3+ apresenta transferência de carga mais eficiente e consequentemente maior intensidade na emissão fotoluminescente. Outro fator que favorece a propriedade óptica das amostras é a compensação de carga, pois contribui para o aumento da desordem estrutural devido à formação de vacâncias do íon Ca2+.

Through the polymeric precursor method were synthesized samples Ca0.98Sr0.01X0.01TiO3 (X= Eu3+, Sm3+ and Pr3+), which under different heat treatments were obtained with levels of distinct structural order-disorder. The synthesized materials were characterized by X-ray diffraction, confirming the obtaining of ahomogeneous material with perovskite-type orthorhombic structure. This characterization allowed evaluating the average crystallite size of the samples that varies depending on the rare-earth ion. The results of photoluminescence emission confirmed the presence of this optical phenomenon at room temperature and its relationship to the level of order-disorder structural system. The photoluminescence emission is more intense in samples annealed at 500 ° C (independent on the dopant ion), the variation of the dopant influence on the emission intensity due to charge transfer between the host and emitting rare-earth ion, where the doped with Pr3+ ion has charge transfer more efficient and hence more intense emission in the photoluminescence. Another factor that favors the optical property of the samples is the charge compensation, as it contributes to the increase in structural disorder due to formation of Ca2+ vacancies.

O processo na indústria têxtil, principalmente nas etapas de tingimento e acabamento, requer um grande volume de água. A eliminação desses produtos tóxicos é atualmente um dos mais importantes assuntos em controle de poluição, o que tem levado os pesquisadores a buscar novas técnicas e ferramentas mais poderosas para diminuir ou eliminar a toxicidade dos efluentes líquidos formado em seus distintos processos, sempre levando em conta a eficiência, baixo custo e as regulamentações e legislações voltadas à proteção ambiental. Neste trabalho foi avaliada a aplicação de um resíduo argiloso em processos de tratamento de efluentes de indústrias têxteis para remoção de corantes. Foi realizado um estudo de caracterização do adsorvente através da análise da área superficial e do volume poroso (BET), assim como também a análise de presença de minerais do grupo da esmectita (difração de raios-X). Também foi realizada a otimização do processo adsortivo através da técnica de planejamento fatorial para os corantes Nylosan Azul Brilhante e Azul Anil Op. A análise de BET mostrou que o tratamento térmico provocou uma redução na área superficial de 13,3%, todavia provocou um aumento no tamanho dos poros de 21,2%. A análise dos difratogramas de raios X das amostras in natura indicou a presença dos grupos minerais esmectita, caulinita e mica (ilita). Foi observada, ainda, a participação do mineral quartzo (d001 = 3,35 Å) no conjunto dos minerais presentes na argila. Com o auxílio do planejamento fatorial para os dois corantes, verificou-se a influência significativa no processo da variável massa, velocidade de agitação e temperatura. Obtiveram-se resultados satisfatórios na redução da concentração por adsorção, mostrando-se que a amostra em estudo é eficaz para a remoção dos corantes ácido Nylosan Blue e reativo Azul anil Op.

The textile industry process, especially in dyeing and finishing steps, requires a large volume of water. The elimination of these toxic products is currently one of the most important subjects in pollution control, which has led researchers to seek new techniques and more powerful tools to reduce or eliminate the toxicity of wastewater formed in its different processes, always taking into account efficiency, low costs and the laws and regulations aimed at environmental protection. In this study we evaluated the application of a clay waste in processes of wastewater treatment for removal of textile dyes. A study was conducted to characterize the adsorbent through the analysis of surface area and pore volume (BET), as well as the analysis of the presence of smectite group minerals (X-ray diffraction). The optimization of the adsorptive process through the technique of factorial design was used. The BET analysis showed that the heat treatment caused a reduction in the surface area of 13.3%. However caused an increase of 21.16% in the pore size. The analysis of X-ray diffractograms of the samples indicated in nature, therefore, the presence of mineral groups smectite, kaolinite and mica (illite). The mineral quartz participation (d001 = 3.35 Å) was also observed in all the minerals found in clay. With the help of factorial design for the two dyes, there was a significant influence in the process of variable mass, agitation speed and temperature. We obtained satisfactory results in the reduction of concentration by adsorption, being effective for the removal of acid dyes and reactive Nylosan Blue Indigo Blue Op

Several species of Croton have been described with biological activities, mainly due to diterpenes, alkaloids and/or other secondary metabolites. These activities account for the traditional use of Croton species to treat certain diseases in South America, Asia and Western Africa. The crude methanol extracts obtained from leaves and steam bark of Croton dichrous Müll. Arg., C. erythroxyloides Baill., C. myrianthus Müll. Arg. and C. splendidus Mart. ex Colla were tested for antiproliferative activity against ten human cancer cell lines. Chemical analyses of all extracts were carried out by GC/MS and HPLC/MS/MS. The leaf extract obtained from C. erythroxyloides showed potent activity against PC-3 (prostate) and OVCAR-3 (ovary) cell lines. Lupeol is suggested to be involved in such activity. Tiliroside, an acyl-glycosilated flavonoid ubiquitous in all tested extracts, seems to play an important role in the observed moderate activity of most extracts against the leukemia K562 cell lineage.

Croton macrobothrys Baill, Euphorbiaceae, is a tree from the Atlantic Forest in Southern Brazil, used in traditional medicine and popularly known as "dragon's blood" and "pau-sangue". Leaf n-hexane, dichloromethane and methanol extracts were analyzed by GC/MS and evaluated for their in vitro antiproliferative activity on cell lines 786-0 (kidney), HT-29 (colon), K562 (leukemia), NCI-ADR/RES (drug resistant ovary), NCI-H460 (lung), MCF-7 (mammary), PC-3 (prostate), OVCAR-3 (ovary), U251 (glioma) and UACC-62 (melanoma). The dicloromethane extract exhibited activity against all cell lines at the concentration 25 µg/mL, in particular on cell lines NCI-H460 (GI50 0.33 μg/mL) and K5662 (GI50 0.91 μg/mL). Relevant constituents in dichloromethane extract are the alkaloids corydine and salutaridine, as well as the diterpenes geranylgeraniol and crotonin-derived clerodanes.

A adesão e resposta à vacina contra hepatite B foram avaliadas em comunidades remanescentes de quilombos no Brasil Central. Um total de 708 indivíduos suscetíveis à infecção pelo vírus da hepatite B foi convidado para participar do programa de vacinação contra hepatite B em oito comunidades. Apesar de 567 (80%) indivíduos terem recebido a primeira dose, somente 198 (28%) aderiram ao esquema completo de vacinação. De 148 sujeitos que concordaram em dosar o anti-HBs, 123 (83,1%; IC95%: 75,9-88,6) responderam à vacina. Um título geométrico médio de 512mUI/mL (IC95%: 342,5-765,3) foi encontrado. Sexo masculino e idade foram independentemente associados com ausência de resposta. Programas adicionais de educação em saúde e esquemas alternativos de vacinação contra hepatite B são necessários para melhorar a cobertura vacinal nessas comunidades no Brasil Central.

Compliance with and responses to the hepatitis B vaccine were evaluated in remaining quilombo communities in Central Brazil. A total of 708 individuals who were susceptible to hepatitis B virus infection were invited to participate in the hepatitis B vaccination program in eight communities. Although 567 (80%) individuals received the first dose, only 198 (28%) complied with the full vaccination scheme. Of 148 subjects who agreed to be tested for anti-HBs, 123 (83.1%; 95%CI: 75.9-88.6) responded to the vaccine. A geometric mean titer of 512mIU/mL (95%CI: 342.5-765.3) was found. Male sex and older age were independently associated with non-response. Additional health education programs and alternative hepatitis B vaccine schedules are needed to improve the vaccination coverage in these communities in Central Brazil.