Biomaterials have been intensively investigated due to the increase in the elderly population and high prevalence of several disorders, such as cardiovascular and orthopedic diseases. Polymeric and composite polymeric materials in combination with different processing techniques, such as electrospinning, solution blow spinning, ultrathin film preparation, and 3D printing are promising for obtaining biomaterials with patient-specific applications. Here, we provide a review on recent advances and perspectives for synthetic and natural polymers as well as composites in the design of biomaterials. After introducing basic information about biomaterials, we describe the fundamentals of manufacturing techniques and highlight possible biomedical applications.

The molecular control in Langmuir-Blodgett (LB) films may be exploited in charge storage electrodes provided a suitable choice of molecular architecture and components is made. In this paper, we employed a naphtyl-1,3,4-oxadiazole amphiphile (NFT1) and its complex [Ru(bpy)2NFT1]PF6 (RuNFT1) (bpy = 2,2’-bipyridine) in heterostructured LB films in a proof-of-principle production of charge storage. The optimized architecture contained a one-layer RuNFT1 deposited on a 9-layer NFT1 LB film, where the efficient packing of NFT1 inferred from spectroscopic measurements and Brewster angle microscopy (BAM) images was considered as relevant for ion diffusion. This packing was achieved owing to the π-stacking warranted by the planarity of the NFT1 naphtyl 1,3,4-oxadiazole ring, as confirmed with density functional theory (DFT) calculations. The top layer of the redox-active RuNFT1 provided an additional contribution with its Faradaic charge storage to the double layer capacitance of NFT1. Taken together, these results demonstrate that synergy may be achieved in combining distinct compounds in LB films toward efficient charge storage.

Immunosensors based on impedance spectroscopy for diagnosing hepatitis C are reported where the sensing units were made with the antigenic peptide PPLLESWKDPDYVPPWHG (NS5A-1) derived from the NS5A protein of the hepatitis C virus (HCV) immobilized in layer-by-layer (LbL) films with silk fibroin (SF) and deposited on gold interdigitated electrodes. The electrical response of the sensing units varied upon immersion into solutions containing the antibody anti-HCV owing to the biomolecular recognition of NS5A-1. This was associated with morphological changes on the LbL films caused by adsorption of NS5A-1 and inferred from atomic force microscopy images. Buffer solutions with different anti-HCV concentrations down to 2 ng mL-1 could be clearly distinguished by analyzing the impedance spectroscopy data with a multidimensional projection technique. The specificity toward anti-HCV antibodies was confirmed in control experiments where no significant changes in the electrical response were measured by exposing the sensing units to solutions containing an anti-human immunodeficiency virus (HIV) antibody. The high sensitivity and selectivity of the units made with LbL films demonstrate the feasibility of measuring electrical impedance as an immunosensing strategy to detect hepatitis C.

We report on the synthesis of single-crystalline tellurium nanowires with different aspect-ratios prepared via facile surfactant-assisted synthesis under mild conditions. Short and long Te nanowires were synthesized by the reduction of tellurium dioxide by hypophosphorous acid with the assistance of polyoxyethylene (23) laurylether and cetyltrimethylammonium bromide, respectively. We obtained uniform single-crystal Te nanowires with diameter below 30 nm and tunable length from 600 nm to 5 µm. Short and long Te nanowires showed remarkable nonlinear absorption and their third-order nonlinear optical properties were investigated by the Z-scan technique with single 80 ps laser pulses at 532 nm. For the first time, it was observed a distinguished switching behavior from saturated absorption to reverse saturated absorption as a function of the laser intensity in one-dimensional Te nanostructures. Although both short and long Te nanowires display such interesting behavior, the short ones exhibited superior optical limiting performance.

This paper discusses fundamental concepts for the characterization of Langmuir monolayers and Langmuir-Blodgett (LB) films, with emphasis on investigations of material properties at the molecular level. By way of illustration, results for phospholipid monolayers interacting with the drug dipyridamole are highlighted. These results were obtained with several techniques, including in situ grazing incidence X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, fluorescence microscopy, in addition to surface pressure and surface potential isotherms. Also mentioned are the difficulties in producing Langmuir and LB films from macromolecules, and how molecular-level interactions in mixed polymer LB films can be exploited in sensors.

Chitosan incorporated in the aqueous subphase is found to affect the Langmuir monolayers of cholesterol, causing the surface pressure and the surface potential isotherms to become more expanded. The mean molecular area per cholesterol molecule in the condensed monolayer increases from 53 Ų in the absence of chitosan to 61 Ų for a concentration of 0.100 mg/mL of chitosan in the subphase. If additional chitosan is incorporated in the subphase, no change is noted, which points to saturation in the effects from chitosan. The interaction between chitosan and cholesterol probably occurs via hydrogen bonding. The monolayer expansion is also manifested in the monolayer morphology, as indicated by Brewster angle microscopy measurements, where larger cholesterol domains are visualized when chitosan is present in the subphase.

This paper discusses water at interfaces with emphasis on the electrical properties of adsorbed films. Two issues are addressed, namely adsorption of organic molecules at the air/water interface in Langmuir monolayers and the influence of adsorbed water on the electrical properties of nanostructured organic films deposited onto solid substrates. In Langmuir monolayers the focus will be on the interaction of the adsorbed molecules with the underlying water, particularly with regard to the surface potential and lateral conductance of the monolayers. It will be shown that these electrical measurements are extremely sensitive to small changes in the subphase, including trace amounts of impurities. Phase transitions due to structuring of the monolayer will be discussed at the light of theoretical models that deal with proton transfer along the monolayers. Attempts will be made to connect the interpretation at the molecular level with experimental findings from techniques such as Brewster angle microscopy and fluorescence microscopy, which provide information at the mesoscopic or microscopic scale. The gradient of the dielectric constant for water at the monolayer interface is inferred from modeling the monolayer surface potential in terms of the dipole moments of the molecules. For deposited films, the discussion will be centered on the electrical properties of nanostructured films produced with either the Langmuir-Blodgett (LB) or the layer-by-layer (LBL) methods. The strong effects from adsorbed water will be presented, with mention to sensor applications where the extreme sensitivity of the electrical properties to water is exploited and to doping of a conducting polymer induced by X-ray irradiation.

A study is presented of the formation and optical properties of polymeric heterostructures from poly(p-phenylene vinylene) (PPV) and poly(o-methoxyaniline) (POMA) produced via the self-assembly technique. POMA layers were obtained in a non self-limiting process from its emeraldine salt, semiconducting form in HCl solution. Thermal conversion of PPV was performed at low temperatures with the substitution of the counter-ion Cl in the PPV precursor by a long sulfonic chain, the dodecylbenzenesulfonate (DBS) ion. The optical properties of PPV films converted in this way are not affected by POMA, which can be used as transparent electrode of PPV luminescent devices.