Resumo Neste trabalho a potencialidade da integração de tecnologias coagulação/floculação, processo oxidativo avançado (reação de Fenton) e filtração lenta foram estudados com o objetivo de tratar resíduo líquido laboratorial apresentando compostos da indústria cosmética e têxtil, principalmente. O sistema de tratamento foi realizado em escala laboratorial através da coagulação/floculação, o equipamento de jarros foi utilizado com uma sequência de duas fases de rotação: mistura rápida a 300 rpm por 20 segundos, mistura lenta a 30 rpm durante 6 minutos e 10 segundos com a adição de polímero aniônico e com um tempo de sedimentação de 60 minutos em temperatura ambiente. No tratamento via reagente de Fenton duas fases de rotação foram estudadas: mistura rápida a 300 rpm por 20 segundos com a adição de ferro (Fe2+), mistura lenta a 30 rpm durante 6 minutos e 10 segundos com a adição de peróxido de hidrogênio e 60 minutos de sedimentação em temperatura ambiente. Na filtração lenta foi utilizado um tanque cilíndrico de policloreto de vinila, areia e mantas sintéticas não tecidas. A taxa de filtração adotada durantes os experimentos foi de 3 m3 m-2 d-1 com um tempo de detenção hidráulica de 264 minutos. As melhores concentrações de reagentes químicos utilizados nos tratamentos foram: 0,80 mg L-1 de polímero aniônico, 200,00 mg L-1 de H2O2 e 13,00 mg L-1 de ferro solúvel total. A integração das tecnologias de tratamento permitiu a remoção de 75,27% de DQO e 94,12% de fenóis totais. Além disso, a conjugação dos processos permitiu remoção de COT de 87,58%.
Abstract This study investigated of the potential value of the integration of the coagulation/flocculation, Advanced Oxidation Processes (AOP) (Fenton reagent) and slow sand filtration technologies, with the aim of treating laboratory wastewater. The treatment system was designed in laboratory scale through coagulation/flocculation. It involved the use of Jar Test equipment with a sequence of two rotational phases: fast mixes to 300 rpm for 20 seconds and slow mixes to 30 rpm for 6 minutes and 10 seconds, with the addition of anionic polymer and sedimentation for 60 minutes at ambient temperature. In the treatment via Fenton reagent, two rotational phases were used: rapid mixing at 300 rpm for 20 seconds with the addition of iron (Fe2+) and slow mixing at 30 rpm for 6 minutes and 10 seconds with the addition of hydrogen peroxide, followed by 60 minutes of sedimentation at ambient temperature. A cylindrical tank of polyvinyl chloride, sands and non-woven synthetic fabrics were used in the slow filtration. The filtration rate adopted was 3 m3 m-2 d-1 with a hydraulic retention time of 264 minutes. The best concentrations of chemical reagents used in the treatments were: 0.80 mg L-1 of polymeric anionic, 200.00 mg L-1 of H2O2 and 13.00 mg L-1 of total soluble iron. The integration of the treatment technologies made it possible to achieve a removal rate of 75.27% of COD and 94.12% of total phenols. Furthermore, the conjugation of the processes allowed the removal of 87.58% of TOC.