In many applications, such as fuel storage tanks and fuel lines, galvanized steel is used as a construction material which comes into contact with biodiesel. Considering that biodiesel is more corrosive than petroleum diesel, studies that aim to increase the corrosion resistance of galvanized steel in this environment are required. The present work investigates how the chemical conversion treatment in the oxalic acid solution affects the corrosion resistance of galvanized steel in soybean biodiesel (B100) in the absence and presence of the natural additives the extract the turmeric, clove, ginger, stone breaker, and rosemary. The results obtained indicate that the conversion treatment reduces the corrosion rate of the zinc coating in soybean biodiesel in the absence and presence of additives, and in this condition the effect of the conversion treatment depends on the additive used. applications lines diesel required B100 B (B100 turmeric clove ginger breaker rosemary B10 (B10 B1 (B1 (B

This paper evaluates the effect of adding glycerol to the electrodeposition bath on the deposition efficiency and characteristics of Ni-Mo coating in concentrations ranging from 0.07 to 0.82 mol.L-1. Evaluation of the corrosion resistance was performed by means of weight loss tests in four different periods of immersion. Electrochemical techniques, such as obtaining polarization curves, linear polarization resistance, corrosion current density, corrosion potential, and electrochemical impedance spectroscopy were applied. Corrosion measurements were obtained in 0.5 mol.L-1 NaCl acid solution and 0.5 mol.L-1 NaOH alkaline solution. The morphology and microstructures of electrodeposited were analyzed using Scanning Electron Microscopy and Spectrometry X-Ray Diffraction. The effect of glycerol on Ni-Mo hardness was evaluated by Vickers microhardness measurements. The presence of glycerol in the electrodeposition bath increased the grain size and decreased the hardness of the coating. However, it promoted the formation of a more compact and less porous coating, increasing the corrosion resistance of the coating. Moreover, the addition of 0.82 mol.L-1 glycerol increases current efficiency, thereby reducing the amount of energy consumed during electroplating.

Abstract The evaluation of material fracture mechanic properties has had an increasing need, especially in the oil and gas industries. This scenario requires quality assurance of fracture toughness tests. This article describes the activities carried out when implementing the Quality Management System (QMS) for the fracture toughness tests at the Physical Metallurgy Laboratory (LAMEF) in the Federal University of Rio Grande do Sul (UFRGS), Brazil, in order to achieve the management and technical requirements of ISO/IEC 17025. Since LAMEF was previously accredited in performing other tests, most of the adequacy was related to the technical requirements of the ISO/IEC 17025 standard. After performing the required adjustments and after an external audit, the Brazilian Institute of Metrology, Quality and Technology (Inmetro) accredited LAMEF to the fracture toughness tests. The accreditation of these tests is unprecedented in Brazil, and we expect this work to encourage other Brazilian and world laboratories to seek the implementation and accreditation of QMS for fracture mechanics tests.