O objetivo do trabalho foi caracterizar três lotes de albendazol com técnicas analíticas farmacopéicas e complementares a fim de estabelecer especificações mais detalhadas para o desenvolvimento de formas farmacêuticas. Os lotes ABZ01, ABZ02 e ABZ03 apresentaram fusão em 208 ºC, 208 ºC e 209 ºC. Foi possível evidenciar, por difração de raios X, que os três lotes apresentaram comportamento cristalino e ausência de polimorfismo. Através da microscopia eletrônica de varredura verificou-se que todas as amostras apresentaram cristais com diferentes tamanhos e forte tendência de agregação. As amostras foram insolúveis em água (5,07; 4,27 e 4,52 µg mL-1) e muito pouco solúveis em HCl 0,1M (55,10; 56,90 e 61,70 µg mL-1) e, ainda, apresentaram pureza dentro da faixa especificada pela F.Bras.V (98% a 102%). O método farmacopéico de doseamento não foi reprodutível, e algumas mudanças foram necessárias. O método foi validado e demonstrou ser seletivo, específico, linear, robusto, preciso e exato. A partir dessa caracterização, pode-se concluir que apenas técnicas farmacopéicas não são capazes de detectar diferenças sutis entre os ingredientes farmacêuticos ativos, necessitando, portanto, de uso de outras técnicas complementares para garantir um rígido controle de qualidade na indústria farmacêutica.

The aim of this study was to characterize three batches of albendazole by pharmacopeial and complementary analytical techniques in order to establish more detailed specifications for the development of pharmaceutical forms. The ABZ01, ABZ02, and ABZ03 batches had melting points of 208 ºC, 208 ºC, and 209 ºC, respectively. X-ray diffraction revealed that all three batches showed crystalline behavior and the absence of polymorphism. Scanning electron microscopy showed that all the samples were crystals of different sizes with a strong tendency to aggregate. The samples were insoluble in water (5.07, 4.27, and 4.52 mg mL-1, respectively) and very slightly soluble in 0.1 M HCl (55.10, 56.90, and 61.70 mg mL-1, respectively) and additionally showed purities within the range specified by the Brazilian Pharmacopoeia 5th edition (F. Bras. V; 98% to 102%). The pharmacopeial assay method was not reproducible and some changes were necessary. The method was validated and showed to be selective, specific, linear, robust, precise, and accurate. From this characterization, we concluded that pharmacopeial techniques alone are not able to detect subtle differences in active pharmaceutical ingredients; therefore, the use of other complementary techniques is required to ensure strict quality control in the pharmaceutical industry.

This study describes unpublished research on improving the solubility of benznidazole by the formation of an inclusion complex. The cyclodextrins selected were αCD, βCD, γCD, HPβCD, RMβCD and SBβCD. All complexes were obtained in solution, presenting 1:1 stoichiometry according to the phase solubility diagram. The highest association constants were obtained with RMβCD and SBβCD, being selected for attainment of solid state complexes. These were characterized using XRD, SEM and dissolution test. The data obtained suggest the formation of complexes and indicate that these may provide a promising alternative way of developing solid doses of drug with suitable biopharmaceutical properties.

An UV-Vis spectrophotometry analytical method for quantifying Efavirenz was developed and validated as an alternative to replace the HPLC current method. The report method presents sample concentration of 10 μg mL-1, dissolved in a solution ethanol:water (60:40, v/v), economic and technically adequate for the purpose adopted. The results and the statistical treated proved that the method being considered an precise and accurate analytical low cost alternative for laboratory routine. The adaptability of this method in product and other analytical methods development has been challenged by mathematical calculation of drug extinction coefficient in water and methanol and practical experiments, showing interesting results.

This work aimed the development and validation of a new dissolution test for ornidazole coated tablets. The dissolution conditions were determined after testing Sink conditions, dissolution medium, apparatus, stirring speed, 24 h stability and medium filtration influence. The best conditions were paddle at a stirring speed of 75 rpm and 900 mL of 0.1 M HCl. A new HPLC quantification method was developed and validated. The dissolution test and quantification method showed to be adequate for their purposes and could be applied for quality control of ornidazole coated tablets, since there is no official monograph.

The aim of this work was the development of a dissolution method for benznidazole (BNZ) tablets. Three different types of dissolution media, two stirring speeds and apparatus 2 (paddle) were used. The accomplishment of the drug dissolution profiles was compared through the dissolution efficiency. The assay was performed by spectrophotometry at 324 nm. The better conditions were: sodium chloride\hydrochloride acid buffer pH 1.2 with stirring speed of 75 rpm, volume of 900 mL and paddle as apparatus. Ahead of the results it can be concluded that the method developed consists in an efficient alternative for assays of dissolution for benznidazole tablets.

O trabalho teve como objetivo a verificação das possíveis interferências dos excipientes utilizados na obtenção do comprimido de liberação imediata à base de benznidazol por meio do processo de compressão direta e realização de estudo comparativo entre os comprimidos obtidos e o medicamento de referência Rochagan®, obtido por meio da granulação por via úmida. Sete lotes de bancada (LB) foram produzidos e aspectos, tais como compressibilidade, fluxo do pós, peso médio, friabilidade, desintegração, dureza, teor, dissolução, uniformidade de conteúdo, cinética de liberação in vitro (dissolução) e compatibilidade físico-química fármaco/excipiente foram avaliados. Diante dos resultados obtidos pode-se verificar que os pós analisados apresentaram características adequadas para o processo da compressão direta, além da comprovação da não existência de interação de natureza físico-química entre o fármaco e os excipientes testados. Os comprimidos obtidos a partir do LB I e III foram escolhidos para o estudo comparativo frente ao medicamento de referência, demonstrando semelhança com os resultados observados, tratados estatisticamente. Torna-se, assim, uma alternativa para a produção de medicamento destinado ao tratamento da doença de Chagas com um custo reduzido e qualidade satisfatória.

This work aimed to verify the interferences caused by the use of excipients for immediate release tablets based on benznidazole obtained by direct compression and the accomplishment of a comparative study between the tablets developed and the reference medicine RochaganTM, obtained by wet granulation. Seven small-scale batches (SSB) were developed and aspects such as compressibility, powder flow, mean weight, friability, disintegration, hardness, assay, content uniformity, kinetic of release in vitro (dissolution) and drug/excipients physical-chemical compatibility were evaluated. Based on the obtained results it can be verified that the analyzed powders presented adequated characteristics for the direct compression process, beyond the inexistent evidence of a physical-chemical interaction between the drug and the tested excipients. The tablets obtained from SSB I and III were chosen for the comparative study with the reference medicine, demonstrating similarity with the statistically treated obtained results, becoming an alternative option of a medicine product for the treatment of Chagas' disease with reduced cost and satisfactory quality.

The analytical method of high performance liquid chromatography (HPLC) for the assay of benznidazole in tablets was developed and validated following the requirements of regulatory agencies. The method used as mobile phase acetonitrile:wather 1:1, a C18 column of 12.5 cm length x 4 mm id, 5 mm particles and lambda=316 nm. The statistical analysis of the results demonstrated that the method satisfies all parameters so as to be considered a safe and efficient analytical alternative of low cost for laboratory routine.