Abstract The clay minerals have characteristics and properties that allow their applicability in the cosmetic area, being incorporated into formulations as an active principle. Therefore, the aim of this work is characterizing and evaluating the influence of a clay from Miracema do Norte, Tocantins, Brazil, named Clay V, on the physicochemical characteristics of a hydrophilic gel of Aristoflex®, a copolymer of the neutralized acryloyldimethyltaurate and vinylpyrrolidone sulphonic acid. Clay V was decontaminated and characterized through microbiological evaluation, crystalline phases present by X-Ray Diffraction (XRD), chemical composition by X-Ray Fluorescence (XRF), thermogravimetric analysis (TGA) and granulometric distribution by sieving. Gels were prepared using Clay V with particles in the range ≤ 180 μm in three different concentrations: 1%, 3% and 5% (w/w) and a standard gel without clay. The formulations were evaluated according to organoleptic characteristics, pH, viscosity, spreadability and the centrifugation test. The microbiological evaluation showed that the clay sample is in compliance with the parameters established by the legislation. The following mineral phases were identified by XRD: kaolinite, illite, vermiculite and quartz, mainly composed of silica and alumina according to XRF. Thermal analysis showed that the clay has two thermal decomposition reactions, the largest being 547.6°C. The granulometric analysis identified that the largest fraction (63.22%) was of particles with sizes greater than 710 μm. The organoleptic characteristics presented by the formulations were suitable, with characteristic gel odor, homogeneous appearance, soft and refreshing texture and staining based on the concentration of Clay V used. The obtained pH values were within the range between 5.5 and 6.5, and it was verified that the gel has high spreadability, distributing evenly on the skin. The values obtained for viscosity showed that the formulations are non-Newtonian fluids with pseudoplastic behavior. The centrifugation test showed that the formulations are stable, with no phase separation. The results obtained with the tests showed that the natural clay V material is beneficial in cosmetic products and can be used for incorporation in cosmetic gel formulations of Aristoflex® type.

The Brazilian male beauty market occupies the second place in world consumption of cosmetics. Among the numerous products consumed by such audience is the capillary fixation mask, which is mainly composed by fixatives. These additives act on stabilizing the cosmetic emulsion, protecting the hair against moisture and also increasing the intensity of hair fixation. In this work, three formulations for modelling creams were prepared by different concentrations of the fixatives StylezeTM W20 and PVP K90 and their properties characterized by physicochemical, rheological and sensory analysis. The capillary masks produced were stable oil-in-water (O/W) emulsions with uniform droplets of 2.05-2.82 μm sizes and pseudoplastic thixotropic behavior (0.19 < n < 0.26). It was possible to correlate the increased concentration of PVP K90 to a greater thixotropy and an improved yarn fixation, despite the worsening in the spreadability of the formulations. These results suggest properly conducted rheological measurements can contribute to the prediction of the emulsion’s sensory properties, which can save time and funds on the development of new cosmetics.

Atualmente, a utilização de gel contendo peróxido de carbamida manipulado em Farmácia é uma prática comum na população. No entanto, a qualidade deste produto é questionada, sobretudo no que se refere à estabilidade deste fármaco. O objetivo deste trabalho consiste na avaliação da viabilidade de sintetizar e analisar quantitativamente este fármaco associado ou não a um gel de Carbopol através de metodologia analítica compatível com a rotina das Farmácias. A reação entre a uréia e o peróxido de hidrogênio foi realizada em tempos diferentes de repouso após a mistura, 24 h para sintetizar o pó PC 24 e 48 h para o pó CP 48. Estes pós foram associados a um gel (G) de Carbopol 940® 1,5 %, originando as amostras G24 e G48. A estabilidade dos pós (PC 24 e PC 48) e das formulações (G 24 e G 48) foi avaliada em função do tempo (15, 40 e 45 dias) e da variação térmica (refrigeração: 8 °C±1; choque térmico: 32 °C±1/8 °C±1 e estufa: 32 °C±1), através da técnica de titulometria. Os resultados indicam que unicamente sob refrigeração o CP24 e o CP 48 mantiveram-se estáveis no período de 45 dias. O G24 e o G48 apresentaram estáveis por pelo menos 45 dias nas condições de refrigeração e choque térmico e por 30 dias na condição estufa. Os resultados obtidos para o G24 e G48 foram ligeiramente superiores aos obtidos para o controle. Além disso, é possível concluir que a associação do PC com o gel de Carbopol 940® 1,5 % promoveu um aumento na estabilidade do PC e que as preparações manipuladas contendo PC são viáveis para uso durante um período de 45 sob refrigeração. A titulometria mostrou-se uma técnica eficaz para a análise do PC associado ou não ao gel de Carbopol 940® 1,5%.

Nowadays the use of gel containing carbamide peroxide (CP) prepared in Pharmacy is a normal practice in the population. However, the quality of this product is questionable concerning its stability. The aim of this study is was to synthesize and to analyze this drug alone or associated to Carbopol gel through analytical methodology compatible with the routine of the Pharmacies. The reaction between urea and hydrogen peroxide was carried out at different resting times: 24 hours (CP 24 powder) and 48 hours (CP48 powder) after the mixture. Both products were associated with Carbopol 940® gel 1.5% (G) generating G24 and G48 samples. The stability of powders (CP24 e CP48) and the formulations (G24 and G48) were evaluated as a function of time (15, 40 and 45 days) and thermal variation (refrigeration: 8 °C±1; thermal shock 32 °C±1 /8 °C±1; stove: 32 °C±1), using a standard titration method. As a result, only under refrigeration the CP24 and CP48 contents remained stable during the period of 45 days. An interesting finding was that G24 and G48 presented greater stability for at least 45-days under refrigeration and thermal shock conditions, and up to 30 days under stove conditions. The results for the G24 and G48 were slightly higher than those obtained for the control. Therefore, we were able to conclude that association with Carbopol 940® Gel 1.5 % provided greater CP stability and that manipulated formulations containing CP may be viable for use in a period of 45 days under refrigeration conditions. The titration proved to be an effective technique for the analysis of CP with or without Carbopol 940® gel 1.5%.

Polymers are often used to coat tablets for controlled drug release. The purpose of this study is to evaluate the solubility of the HPMC and PVA blend compared to isolated polymers in solutions with a pH of biological fluids (6 and 1.2) and the dissolution of capsules obtained using theophylline granules produced with the HPMC/PVA 25/75 blend as a matrix and as coating. HPMC is completely solubilized in the medium that simulates the pH of the stomach and intestine, and PVA is the polymer that allows controlling the solubility of the blend in the medium, with a differents pH. The dissolution time was monitored by UV absorbance with maximum theophylline at 269 nm. The theophylline was released immediately in the granules, and in the capsules 78.4% after 30 minutes and 97.4%, after 120 minutes. Thus, PVA can potentially control the drug solubilization, contributing to obtaining modified release systems.