ABSTRACT Objective: To evaluate and compare bite force (BF) in permanent first molars restored with glass ionomer cement (GIC), composite and amalgam, and normal contralateral permanent first molars. Material and Methods: BF was recorded in decayed permanent first molars, which were filled with GIC (n=30), composite (n=30), and amalgam (n=30), and in healthy contralateral first molars (n=90) with Force Transducer Occlusal Force Meter and compared. Results: BF was significantly higher in normal teeth on the contralateral side compared to teeth restored with GIC and composite. However, in patients with amalgam restoration, though it was less compared to that on the contralateral side, it was not statistically significant (p>0.05). Conclusion: Restoring teeth with various filling materials may improve bite force. In the present study, it was found that the teeth restored with amalgam had higher bite forces in comparison to the other restorative materials used. However, it was not comparable to that observed in the normal tooth (control) on the contralateral side.

ABSTRACT Objective: To identify the clinicopathological correlation of E-cadherin expression in metastatic and non-metastatic oral squamous cell carcinoma (OSCC). Material and Methods: A total of 90 paraffin-embedded tissue sections of OSCC were retrieved from the registry. The total selected samples were 45 cases each from the primary lesions of metastatic and non-metastatic OSCC. One section was subjected to routine Hematoxylin and eosin stain and another to immunohistochemical analysis for E-cadherin expression. Results: A non-significant (p˃0.05) increased expression is seen in the non-metastatic group compared to the metastatic group, with predominantly membrane as the staining site in either group. However, the expression of E-cadherin did not reveal any statistically significant association with independent variables such as age, gender, and adverse habits of the patients (p>0.05). On the other hand, with respect to the histological differentiation of OSCC, a significant association (p<0.001) was observed with the well-differentiated type of metastatic OSCC. Conclusion: E-cadherin was useful to some extent in predicting regional metastasis. However, further studies using a panel of biomarkers with increased sample size may help us understand the process involved in metastasis.

Abstract Objective: To compare porcelain and metal repair done with both nanocomposite and conventional composite. Material and Methods: A total of 30 cylinders were fabricated from Porcelain (I), Porcelain fused to metal (II), and metal (III) substrate each. Control group (A) was bonded with conventional micro-hybrid composite and experimental group (B) was bonded with nanocomposite in a 2 mm thickness. All specimens were thermocycled and stored in distilled water at 37 °C for 7 days. A universal testing machine was used to measure the Shear bond strength (SBS). The difference between bond strengths of the groups was compared using an independent t-test. Results: In all three groups, the SBS was higher in the experimental group as compared to the control group. The use of nanocomposite of metal alloy presented maximum shear bond strength, followed by samples of porcelain fused to metal and finally porcelain, showing the lowest values of SBS. Conclusion: Porcelain and alloys bonded with nanocomposite exhibit enhanced adhesiveness as well as aesthetic and mechanical properties. This subsequently would translate into providing higher clinical serviceability and durability and hence a cost-effective and accessible repair option for human welfare.

Abstract Objective: To evaluate the effect of different preparations of fluoride gels on the salivary pH of albino rats. Material and Methods: This experimental study consisted of 40 Albino rats randomly divided into four equal groups. Group A was the control group and received no intervention. Experimental group B received a topical application of 0.2% sodium fluoride gel. Experimental group C received topical application of stannous fluoride gel 0.4%. Experimental group D received topical application of APF gel (1.23% acidulated phosphate fluoride gel). The different preparations of the gels were applied once daily for 4 minutes on the occlusal surface of the right maxillary molars for 14 days. Salivary pH values were recorded immediately after the application of gels with the help of pH paper on day 1 and day 14. Results: There was a significant difference in the pH level of groups B, C and D after 14 days of fluoride application (p < 0.05). The non-parametric Kruskal Wallis test was applied for the comparison between the groups. Conclusion: This study concluded that all the fluoride gels after administration caused the acidic pH of saliva with the most acidic effect produced by APF gel.

ABSTRACT Objective: To determine the association of socio-demographic and clinic-pathological risk factors with oral cancer in Kelantan, Malaysia. Material and Methods: A 19-year cross-sectional survey was performed in Hospital Universiti Sains Malaysia (HUSM), Malaysia. Medical record of 301 oral cancer patients was retrieved from the Medical Records office. Results: The majority of the oral cancer cases were male (62.8%), non-smokers (57.5%), non-alcohol consumers (83.4%), non-betel quid chewers (96.7%), and belonged to Malay ethnicity (68.8%). At the time of diagnosis, most of the patients were at stage II (38.9%). Approximately one-third (30.6%) of the total OC patients experienced loco-regional/distant metastasis, whereas no metastasis was detected in around two-thirds of cases (69.4%). A combination of surgery and radiotherapy was the most commonly employed treatment modality (27.2%). At the time of this study, the survival status of most of the patients was alive (69.1%). The most frequently encountered oral cancer in the Kelantanese population was oral squamous cell carcinoma (70.1%), with the tongue being the most frequently involved oral cavity site (35.5%). Conclusion: More than three-fourths of the cases were alive at follow-up, which included the cases that did not undergo any form of treatment.

ABSTRACT Objective: To evaluate the effect of pain and swelling related to third molars on patients' quality of life prior to third molar surgery. Material and Methods: The effects on quality of life with reference to oral health of 246 healthy patients seeking treatment of third molars were analyzed using the 14-item Oral Health Impact Profile (OHIP) questionnaire before surgery. The patients' sociodemographic characteristics, medical and dental history, reasons for third molar removal were recorded. Adverse effects of pain and swelling on oral health-related quality of life were recorded. Results: The mean age of the patients included in the study was 23.15 years, with maximum male patients and the mean OHIP-14 score of 8.01 ± 7.51. About 36.97% of patients reported that their chief complaint was pain/swelling due to third molar infection, and 27.9% of subjects reported one or more of the 14 OHIP items. The odds of reporting for age with ≥25 years was approximately 2 times greater than age with ≤25 years (OR=1.56, 95% CI: 1.01-2.57) and tooth loss due to traumatic history (OR=3.14, 95% CI: 2.12-6.54). Conclusion: Adverse influences on quality of life were seen in a significant number of patients seeking third molar removal. The probabilities increased by 3-fold for patients who had experienced pain or swelling than asymptomatic individuals.

ABSTRACT Objective: To evaluate dental age assessment reliability through Tooth Coronal Index (TCI) method. Material and Methods: The cone-beam computed tomography (CBCT) scans of 160 individuals aged between 20-70 years were analyzed in the present study. The height of the crown, i.e., coronal height, and the height of the coronal pulp cavity, i.e., coronal pulp cavity height, of mandibular second premolars and first molars were calculated and then TCI was measured. The actual age of a subject was compared with TCI of tooth and the acquired data were subjected to Pearson’s correlation and unpaired t-tests. Results: Negative correlation was observed between the real age and TCI of mandibular first molar (r = -0.094, p=0.382) and second premolar (r = -0.176, p=0.0961. Statistically significant difference was observed between actual age and TCI for mandibular second premolar and first molar (p<0.001). Conclusion: Tooth coronal index has the potential to estimate age of an individual on CBCT scans. It is simple, cost-effective than histological methods and can be applied to both living and unknown dead.

ABSTRACT Objective: To determine the satisfaction with the dentist-patient interaction and factors associated with patient satisfaction among patients attending the outpatient dental clinic Hospital Universiti Sains Malaysia (HUSM). Material and Methods: This cross-sectional study involved 229 patients who attended outpatient dental clinic Hospital USM that located in the East Coast region of Malaysia. A self-administered Skala Kepuasan Interaksi Perubatan - 11 (SKIP-11) questionnaire was used to assess the satisfaction towards dentist-patient interaction. Systematic random sampling was applied in this study. The data were analyzed using simple logistic regression analysis to determine the factors associated with patient satisfaction with dentist-patient interaction. Results: The mean age of patients was 32.6 ± 13.9 years, 71.6% of them study up to tertiary level, 31.5% came to for dental check up and 23.6% of them had tooth decay. More than half (64.6%) of the patients were satisfactory with dentist-patient interaction. The satisfaction percentage in the distress relief domain was 60.7%, 56.8% in the rapport domain, and 53.7% in the interaction outcome domain. Satisfaction with dentist-patient interaction was significantly associated with the dentists’ characteristics such as age (OR = 0.583, 95%CI 0.44-0.76, p=0.001), gender (OR = 0.386, 95% CI 0.22-0.69, p=0.001) and years of service (OR = 0.294, 95% CI 0.15-0.57, p=0.001). Conclusion: The result showed that slightly more than half of the patients who attended the outpatient dental clinic HUSM were satisfied with the dentist-patient interaction, which was found to be influenced by the characteristics of the dentists. Efforts to improve patient-dentist interaction are recommended to ensure delivery of good quality oral health care.

ABSTRACT Objective: To determine the effect of sprue design on the marginal accuracy of the casting. Material and Methods: It was an experimental in-vitro study. There are forty-four crowns of single sprue group with a forty-four double sprue group that was compared in 6 different locations of the margin. The sections were inspected under a microscope at 50X magnification and took a micrograph. The radius from an actual casting edge to a possibly excellent margin was then documented as marginal discrepancy (d), in µm. The marginal discrepancy was documented for each of the six sections per casting. Thus 264 sections were measured for each group. Data were analysed using (ANOVA) for analysis of variance. For bivariate analyses, Chi-square and Student t test were used. The significance level was set at < 0.05. Results: The marginal discrepancy was greater in the single sprue group of cast crown (43.1 ± 4.74 µm) and in double sprue group of cast crown was less (25.7 ± 4.25 µm). This difference is statistically significant (p<0.05). The correlation between single sprue group of casting with a double sprue group of casting by student’s t-test where determination height was 95%. Conclusion: Double sprue design produces a higher accurate margin than single sprue design in the nickel-chromium alloy cast crown.

ABSTRACT Objctive: To assess the soft tissue characteristics of Bangladeshi adults to formulate soft tissue 3D CT standards using Holdaway’s (HA) and lip morphology (LM) analyses. Another aim of this study was to assess the gender dimorphism of Bangladeshi population. Material and Methods: One hundred and seventeen (Eighty-five men and Thirty-two women) Bangladeshi adults have obtained their computed tomography (CT) scan at the Radiology Department for normal diagnosis. Craniofacial deformities were undetected in all cases. The CT images were prepared by a 3D imaging programming software (Mimics 11.02 Materialise). Parameters from the identified landmark points were measured in 3D through this software. Results: Upper lip thickness (ULT) (vermillion UL-A point) measurement was significant in HA and in LM analyses, upper lip protrusion (ULP) (Ls to Sn-SPog) measurement has demonstrated significant difference among both genders, where p-value was less than 0.05. Mean measurements of Bangladeshi adults were relatively comparable except the face convexity (FC) when compared with the HA cephalometric soft tissue values. Conclusion: By using HA and LM analyses, 3D CT soft tissue standards were established for Bangladeshi adults. Measurements for all parameters have remained equivalent with the HA standard data apart from the FC measurement. This consequently may demonstrate that the Bangladeshi population retains a convex shape with a slight protrusive lip or retruded chin.

RESUMO Introdução: Diferentes métodos de pré-tratamento da superfície foram adaptados para otimizar a colagem entre os braquetes ortodônticos e as cerâmicas de zircônia. Objetivo: A presente revisão teve como objetivo analisar, de forma sistemática, os dados relevantes na literatura, para buscar o protocolo de colagem mais efetivo e duradouro. Métodos: As buscas foram feitas em setembro de 2020, nas seguintes bases de dados: PubMed, Scopus e ScienceDirect. A revisão foi feita de acordo com as diretrizes do PRISMA. Resultados: Com base nos critérios de inclusão, 19 artigos foram selecionados para análise qualitativa. A metanálise não pôde ser feita, devido à heterogeneidade na metodologia dos estudos incluídos. A maior parte dos estudos apresentou risco de viés moderado. Comparadas às superfícies não tratadas, as superfícies com pré-tratamento usando jateamento ou laser apresentaram vantagem. Primers e adesivos universais foram mais usados como adjuntos ao pré-tratamento mecânico da superfície de zircônia. Na maioria dos estudos, a termociclagem parece ter reduzido a resistência ao cisalhamento dos braquetes ortodônticos. Conclusões: Com base nessa revisão qualitativa, os pré-tratamentos de superfície com laser e jateamento podem ser sugeridos para otimizar a resistência ao cisalhamento dos braquetes. Para esclarecer esse achado, uma metanálise é necessária. Para isso, faz-se necessária a padronização da metodologia, para lidar com a alta heterogeneidade dos estudos incluídos.

ABSTRACT Introduction: Various surface pre-treatment methods have been adapted to optimize the bonding between the zirconia ceramics and the orthodontic brackets. Objective: This review is aimed at systematically analyzing the relevant data available in the literature, to find out the most effective and durable bonding protocol. Methods: Database search was conducted in PubMed, Scopus, and ScienceDirect, during September 2020. The review was conducted according to the PRISMA guidelines. Results: Based on the inclusion criteria, 19 articles were selected for qualitative analysis. Meta-analysis could not be performed due to the heterogeneity of the methodology among the studies. Most of the studies scored medium risk of bias. Compared to the untreated surface, surface pretreatments like sandblasting and lasers were advantageous. Primers and universal adhesive were mostly used as an adjunct to the mechanical pretreatment of the zirconia surface. In most studies, thermocycling seemed to lower the shear bond strength (SBS) of the orthodontic brackets. Conclusion: Based on this qualitative review, surface pretreatments with lasers and sandblasting can be suggested to optimize the bracket bond strength. To clarify this finding, meta-analysis is anticipated. Hence, high heterogeneity of the included studies demands standardization of the methodology.

ABSTRACT Objective: To evaluate the effectiveness of oil pulling in the management of oral submucous fibrosis (OSMF). Material and Methods: A total of 62 patients clinically and histopathologically diagnosed as OSMF were incorporated in the present study. The subjects are randomly divided equally into two groups, Group A (oil pulling group) and Group B (placebo group). Subjects in Group A were asked to perform OP with sesame oil on an empty stomach in the morning for 3 months and Group B was given placebo capsules for 3 months. Assessment of various clinical parameters was done regularly, and data were analyzed using the Chi-square test. Results: Eighty-two percent had a habit of betel nut chewing, while 18% of the patients had tobacco chewing habits, which were among the main causative factors for OSMF. Clinical improvements in mouth opening, tongue protrusion, difficulty in speech and deglutition, and burning sensation were significant in the Group A. None of the patients reported any discomfort or side effects. The symptoms were not severe in nature and resolved in few days without stopping the therapy. Conclusion: Oil pulling can bring about significant clinical improvements in the symptoms like a mouth opening and tongue protrusion.

ABSTRACT Objective: To reconnoiter the IL-1A (-889) and IL-1RN (+2018) gene polymorphisms and their association with EARR. Material and Methods: The Science Direct, PubMed and Scopus databases were comprehensively searched by two independent reviewers. In addition, the bibliographies of all relevant publications and textbooks were searched manually. A meta-analysis was performed using data available up to May 9, 2020. Results: A total of 13 and 9 publications were selected for the systematic review and meta-analysis, respectively for both IL-1A and IL-1RN genes. Odds ratio (OR) was used to evaluate the association of the gene polymorphism and the risk of EARR. The risk of EARR was estimated using the overall OR from the published studies. No association was found for IL-1A gene for the risk of EARR. However, the dominant and co-dominant models of IL-1RN gene polymorphism were associated with the risk of EARR. Conclusion: More studies are warranted to determine the relationship between IL-1A and IL-1RN gene polymorphisms and EARR for a clearer understanding of their interactions.

ABSTRACT Objective: To establish the cephalometric (Ceph.) norm by Ceph. for orthognathic surgery (COGS) analysis for Saudi population. Material and Methods: 500 adult Saudi samples (250 males and 250 females) with the age range of 18-30 years old were selected for this study. The selections of samples were based on a normal occlusal relationship, no history of facial trauma and no previous orthodontic treatment. Lateral Ceph. radiographs were tracing by CASSOS software and analyzed by SPSS software according to COGS analysis. Results: Significant differences were showed between the Saudi males and females on most of the Ceph. parameters. The Saudi males had a convex facial profile with chin prominent and more bimaxillary protrusion, upper and lower lip protrusion than the Saudi females. Conclusion: This study evaluated the craniofacial morphological difference between the male and the female population in Saudi Arabia by using COGS analysis. The finding of this study will help for better diagnosis of orthodontic and orthognathic surgical treatment planning and identify the morphological facial characteristics of Saudi patients.

Abstract Objective: To identify the prevalence of dental fluorosis in Kingdom of Saudi Arabia. Material and Methods: Literature search for the present study aimed to include all the relevant studies conducted in Saudi Arabia that reported prevalence of dental fluorosis. A literature search was done using keywords (dental, fluorosis, prevalence) using three databases (Scopus, PubMed, and Web of Science). Grey literature was also searched using Google Scholar and research gate. Literature was searched from 1939 till April 2020. The risk of bias was reported using JBI Critical Appraisal Checklist for Studies Reporting Prevalence Data. Twelve studies were included based on inclusive criteria. The only inclusive criteria were studies that were conducted among people living in Saudi Arabia, and studies that reported the prevalence of dental fluorosis. Samples from all age groups that reported prevalence of dental fluorosis were included. MedCalc statistical software was used to perform the analysis. Results: The overall prevalence of dental fluorosis was found to be 46.52%, 95 CI (26.52% to 67.12%). I2 value was reported 99.8%, 95 CI (99.78% to 99.83%), indicating high heterogeneity amongst the finding of studies. Funnel plots indicate the presence of a strong publication bias. Overall, we found some contrasting findings. One study reported prevalence of dental fluorosis as 0% and other with a comparatively large sample size found dental fluorosis to be 90.6%. Conclusion: The present study adds to the literature regarding dental fluorosis in Saudi Arabia by providing an overview of its prevalence. It is concluded that prevalence of dental fluorosis was a bit high. However, findings indicate publication bias. We did not account for severity of dental fluorosis. All the available data was analyzed to measure dental fluorosis prevalence without considering the sample size and sampling technique.