Resumo Os físidos pertencem à classe Gastropoda; pertencem ao filo Mollusca e, sendo bioindicadores, hospedeiros intermediários de parasitas e pragas, ocupam uma posição-chave no ecossistema. Existem três espécies do gênero Physa, ou seja, P. fontinalis, Physa acuta e P. gyrina em corpos d’água do Punjab Central e foram caracterizadas com base em marcadores moleculares. Alto nível de diversidade genética foi revelado por RAPD polimórfico, no entanto os marcadores SSR não foram amplificados. A análise multivariada revelou polimorfismo variando de 9,09% a 50% entre as três espécies de Physid. Um número total de 79 loci foi observado para as três espécies em estudo e 24 loci foram observados como polimórficos. Esses fragmentos RAPD podem ser desenvolvidos em marcadores codominantes (SCAR) por clonagem e podem ser posteriormente sequenciados para o desenvolvimento de marcadores específicos da espécie Physa para identificar as espécies introduzidas e nativas no Paquistão.

Abstract Physids belong to Class Gastropoda; belong to Phylum Mollusca and being bioindicators, intermediate hosts of parasites and pests hold a key position in the ecosystem. There are three species of Genus Physa i.e. P. fontinalis, Physa acuta and P. gyrina water bodies of Central Punjab and were characterized on the basis of molecular markers High level of genetic diversity was revealed by polymorphic RAPD, however SSR markers were not amplified. The multivariate analysis revealed polymorphism ranging from 9.09 percent to 50 percent among the three Physid species. Total number of 79 loci were observed for the three species under study and 24 loci were observed to be polymorphic. These RAPD fragment(s) can be developed into co dominant markers (SCAR) by cloning and can be further sequenced for the development of the Physa species specific markers to identify the introduced and native species in Pakistan.

Resumo Os físidos pertencem à classe Gastropoda; o filo Mollusca possui importante posição na teia alimentar e atua como bioindicador, praga e hospedeiro intermediário. Por serem resistentes, são chamadas baratas de malacologia. Os caramujos físidos foram coletados em diferentes corpos d’água de Faisalabad (Punjab) e identificados até as espécies por meio de marcadores morfológicos. A morfometria dos corpos de prova foi realizada com auxílio de paquímetro digital Vernier em milímetros (mm) por meio de medida linear dos caracteres da casca. A análise de regressão linear da razão AL / SW vs. AL e razão SL / SW vs. AL indicou que o crescimento alométrico existe apenas em Physa acuta quando comparado com P. gyrina e P. fontinalis. Este estudo levará a avaliar a situação das espécies de físido no Punjab Central. A análise do componente principal mostra que o componente 1 (comprimento da casca) e o componente 2 (largura da casca) são os componentes mais prolíficos e quase 80% da identificação. A distância entre P. acuta e P. fontinalis é 5,4699, P. acuta e P. gyrina é 7,6411, P. fontinalis e P. gyrina é 16,6080, mostrando que P. acuta se assemelha a P. fontinalis, e ambos os espécimes não se parecem com P. gyrina. P. acuta é uma espécie invasora e apresenta bioatividade, tornando-se uma candidata potente para substâncias bioativas.

Abstract Physids belong to Class Gastropoda; Phylum Mollusca have important position in food web and act as bio indicators, pests and intermediate host. Being resistant these are called cockroaches of malacology. Physid snails were collected from different water bodies of Faisalabad (Punjab) and were identified up to species using morphological markers. The morphometry of the specimens was carried out with the help of a digital Vernier caliper in millimeters (mm) using linear measurement of shell characters. Linear regression analysis of the AL/SW ratio vs AL and SL/SW ratio vs AL indicated that allometric growth exists only in Physa acuta when compared with P.gyrina and P. fontinalis. This study will lead to assess the status of the Physid species in Central Punjab. The Principal component analysis shows that the Component 1 (Shell Length) and component 2 (Shell Width) are the most prolific components and nearly 80 percent of the identification. The distance between P. acuta and P. fontinalis is 5.4699, P. acuta and P. gyrina is 7.6411, P. fontinalis and P. gyrina is 16.6080 showing that P. acuta resembles with P. fontinalis, and both these specimens donot resemble with P. gyrina. P.acuta is an invasive species and shows bioactivity making it a potent candidate for bioactive substances.

Abstract Rumex vesicarius hasbeen extensively used for the management of diabetes in the traditional system of medicine. The current study was designed to investigate antidiabetic and antihyperlipidemic effects of R.vesicarius and also to explore metabolomic profiling using UPLC-QTOF-MS. The effect of extracts was observed by checking the biochemical and histopathological parameters in diabetic rats. The results had shown a significant dose- dependent inhibition potential of aqueous extract of R. vesicarius seed against α-amylase and α-glucosidase along with significant inhibition in DPPH free-radical scavenging activity. Oral administration of R. vesicarius to diabetic rats significantly ( p< 0.05) ameliorated blood glucose level. It also improved the function of the liver and kidney as well as ameliorated dyslipidemia in diabetic rats. Histopathological examination of the treatment groups reversed the damage of the pancreas, liver, and kidney tissues confirming the antidiabetic efficacy of R. vesicarius. UPLC- QTOF-MS analysis of the extract revealed a total of 42 bioactive compounds, which might contribute to the antidiabetic activity. Based on our findings, we can conclude that R. vesicarius might be a promising candidate for the management of diabetes.

Abstract In this paper, a size-dependent microscale plate model is developed to describe the bending, buckling and free vibration behaviors of microplates made of functionally graded materials (FGMs). The size effects are captured based on the modified strain gradient theory (MSGT), and the formulation of the paper is on the basis of Mindlin plate theory. The presented model accommodates the models based upon the classical theory (CT) and the modified couple stress theory (MCST) if all or two scale parameters are set to zero, respectively. By using Hamilton's principle, the governing equations and related boundary conditions are derived. The bending, buckling and free vibration problems are considered and are solved through the generalized differential quadrature (GDQ) method. A detailed parametric and comparative study is conducted to evaluate the effects of length scale parameter, material gradient index and aspect ratio predicted by the CT, MCST and MSGT on the deflection, critical buckling load and first natural frequency of the microplate. The numerical results indicate that the model developed herein is significantly size-dependent when the thickness of the microplate is on the order of the material scale parameters.

In this paper, the free vibration behavior of post-buckled functionally graded (FG) Mindlin rectangular microplates are described based on the modified couple stress theory (MCST). This theory enables the consideration of the size-effect through introducing material length scale parameters. The FG microplates made of a mixture of metal and ceramic are considered whose volume fraction of components is expressed by a power law function. By means of Hamilton's principle, the nonlinear governing equations and associated boundary conditions are derived for FG micro-plates in the postbuckling domain. The governing equations and boundary conditions are then discretized by using the generalized differential quadrature (GDQ) method before solving numerically by the pseudo-arclength continuation technique. In the solution procedure, the postbuckling problem of microplates is investigated first. Afterwards, the free vibration of microplates around the buckled configuration is discussed. The effects of dimensionless length scale parameter, material gradient index and aspect ratio on the on the postbuckling path and frequency of FG microplates subject to arbitrary edge supports are thoroughly discussed.