In the present paper, an automated online preconcentration system based on the use of two knotted reactors (KR) was developed for Mn determination in tea samples by flame atomic absorption spectrometry (F AAS). The system automation was performed by using four solenoid valves to switch sample streams and reagents. Valves were driven electronically by an integrated Darlington transistor circuit and controlled by an open-source Arduino hardware platform written in C language. The preconcentration was based on the precipitation process of metal ions complexed with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol (5-Br-PADAP) on the inner walls of the reactor, followed by elution with a solution of hydrochloric acid. The optimized system allowed the Mn determination with limit of detection (LOD) of 2.1 mg L-1, precision (relative standard deviation (RSD), 50.0 mg L-1) of 2.6% and enrichment factors of 8. The system presented a sampling frequency of 60 h-1. The method accuracy was evaluated by analysis of the certified reference material (CRM) apple leaves (NIST 1515) and by addition/recovery tests obtaining recoveries between 95.2 to 119%. This method was applied in the Mn determination in commercial tea samples purchased from local trade. Manganese levels were found in a concentration range of 2.95 to 123 µg g-1.

This study describes the preparation of a novel ion-imprinted polymer (IIP) to apply pre-concentration of cadmium ions in water samples of the Pontal Bay in Ilhéus, Brazil. First, cadmium ion was complexed with 2-(2-thiazolylazo)-p-cresol (TAC). Subsequently, there was the polymerization using ethylene glycol dimethacrylate and methacrylic acid monomers along with the radical azobisisobutyronitrile initiator. The mold ions were removed using 2:1 (v v-1) nitric acid. The thermal stability of the polymer was evaluated by thermogravimetry and the characterization was performed by Fourier transform infrared spectroscopy. The maximum adsorption capacity for IIP (qmax = 84.75 mg g-1) could be described by the Langmuir isotherm. The variables: sample flow rate, pH and eluent (nitric acid) were optimized using Box-Behnken design with determination by flame atomic absorption spectrometry (FAAS). The enrichment factor, as well as the limits of detection and quantification (LOQ), were found to be 44, 0.14 and 0.46 µg L-1, respectively. Selectivity was evaluated by using solutions containing CdII, CuII, NiII, PbII, CoII, SO42-, and Cl- ions. The concentration of cadmium ions in the samples varied between < LOQ to 1.25 µg L-1.