Abstract Background The perception of family support in chronic disease can be relevant. Objective To assess the perception of family support in adult patients with epilepsy (PWEs) and relate it to quality of life (QoL) and clinical aspects. Methods Data from the Perceived Family Support Inventory (IPFS) of 130 PWEs were related to the clinical variables, QOLIE-31 scores, and the Neurological Disorders Depression Inventory for Epilepsy (NDDI-E) with statistical tests, with p < 0.05. Results The mean age was 49.9 ± 17.2 years, and the duration of epilepsy was 20.8 ± 15.4 years. The presence of depression (scores ≥ 15) was associated with lower family support. Being married and non-occurrence of depression were the variables associated with a higher IPFS score (R = 0.2112), in the multiple linear regression. Conclusion The perception of greater family support was associated with demographic aspects, the absence of depression, and better QoL. Family relationships may play an essential role in health adjustment behaviors and QoL in epilepsy.

Resumo Antecedentes A percepção do suporte familiar nas doenças crônicas pode ser relevante. Objetivo Avaliar em pacientes adultos com epilepsia (PCE) a percepção do suporte familiar e relacioná-la com os aspectos clínicos e com a qualidade de vida (QV). Métodos Os dados do Inventário de Percepção de Suporte Familiar (IPSF) de 130 PCE foram relacionados com as variáveis clínicas, os escores do QOLIE-31 e com o Neurological Disorders Depression Inventory for Epilepsy (NDDI-E), com testes estatísticos, com p < 0.05. Resultados A idade média foi 49.9 ± 17.2 anos e o tempo de epilepsia foi de 20.8 ± 15.4 anos. Escores ≥ 15 no NDDI-E (presença de depressão) associaram-se a menor suporte familiar. Ser casado e não ter depressão são as variáveis associadas a maiores escores no IPSF (R = 0.2112), na regressão linear múltipla. Conclusão A percepção de maior suporte familiar associou-se à aspectos demográficos, a ausência de depressão e a melhor QV. As relações familiares podem ter papel essencial nos comportamentos de ajustamento na saúde e na QV na epilepsia.

Abstract SARS-CoV-2 is a matter of concern. Here, biosensors were prepared using iron magnetic nanoparticles containing antibodies against the receptor binding domain (RBD) of the spike protein. Antibodies were adsorbed to nanoparticles in three configurations, including direct adsorption without functionalization (DANPs). Nanoparticles were added to a glassy carbon electrode and connected to an electrochemical cell. Electrochemical impedance spectroscopy and ELISA experiments indicated that antibodies were desorbed from the DANPs upon the addition of the RBD. DANPs-based biosensors produced linear curves with decreasing charge transfer resistance due to the removal of antibodies. Thus, a detection method can be based on antibody desorption.

Phenolic compounds are important environmental contaminants due to their high toxicity and persistence in the environment. The use of enzyme-based electrochemical biosensors is a simple, sensitive and low-cost alternative for the determination of these pollutants in contaminated waters. However, in most cases, it is impossible to detect specific compounds in a mixture of phenols due to signal-overlap, as the instruments operate at very close potentials, given that the system is based on a single enzyme to detect similar structures. In order to overcome this problem, in the present work we have successfully used multivariate calibration with partial least squares (PLS) for the simultaneous determination of hydroquinone and guaiacol by a tyrosinase-based biosensor that was assembled using an enzyme extract from yam. The use of PLS allowed us to work with a large number of voltammograms, leading to a single mathematical model for the simultaneous determination of phenols of similar structure in real samples with concentration values of mmol L-1.

In this work, a simple electrochemical biosensor for 4-chlorophenol was developed based on laccase immobilized on a hybrid nanocomposite (ZnO nanoparticles/chitosan), and incorporated in a carbon paste electrode. There are few biosensors in the literature for this specific pollutant because it tends to form polymeric films on the electrode, causing surface passivation or even enzyme inactivation. The carbon paste allowed the surface to be easily renewed by polishing, which amends this limitation. To optimize the experimental conditions, we used cyclic voltammetry and hydroquinone as a representative of phenolic compounds due to the high toxicity of chlorophenol, thus avoiding the generation of hazardous residues. After optimization, a calibration curve was constructed for 4-chlorophenol using differential pulse voltammetry, and a linear response was obtained from 1 to 50 µM, with a lower detection limit of 0.7 µM. The obtained biosensor showed high accuracy when employed in the analysis of industrial wastewater.

Microcystins are non-ribosomal peptides that must be detected for its health concern. Here, microcystin LR and its specific antibody were respectively tethered to the substrate and to the tip of an atomic force microscope, after surface functionalization using 3-aminopropyltriethoxysilane and glutaraldehyde. Functionalization was confirmed comparing topographic images taken on bare and modified tips. Force versus distance curves were successfully used to measure the specific antibody-antigen interactions comparing with a control in which microcystin was initially blocked by incubation with free antibodies. The results showed unequivocally the specific recognition of MLR, suggesting that this method could be useful for biosensor development.

Bacterial production of siderophores may involve specific genes related to nonribosomal peptide and polyketide biosynthesis, which have not been fully identified in the genome of Xylella fastidiosa strain 9a5c. However, a search for siderophore-related genes in strain 9a5c indicated five membrane receptors, including siderophore, ferrichrome-iron and hemin receptors. All these biomolecules are thought to be associated with iron transport and utilization. Eighty isolates obtained from citrus orchards containing trees that developed citrus variegated chlorosis (CVC) were screened for siderophore production. The results demonstrated that only 10 of the isolates did not produce siderophores. Additional strains obtained from coffee, almond, mulberry, elm, ragweed, periwinkle and grape also infected by X. fastidiosa were also shown by the chromeazurol bioassay to produce siderophores. In order to correlate siderophore production with the presence of siderophore-related genes, a polymerase chain reaction (PCR) was developed using specific primers for the catechol-type ferric enterobactin receptor (pfeA) and the hydroxamate-type ferrisiderophore receptor (fiuA) genes of strain 9a5c. The PCR results confirmed our hypothesis by demonstrating that amplification products were detected in all strains except for those isolates that did not produce siderophores.

Este trabalho revela uma estratégia biotecnológica incomum mas valiosa e relacionada com o uso de um mesmo polímero (benzidrilamino-resina, BHAR) para fins de síntese e purificação por troca aniônica de peptídeos. Inicialmente, o octapeptídeo DRVYIHPF-NH2 foi sintetizado em BHAR com 1% e 3% de intercruzamento e contendo 2,5 mmol g-1 de grupos amônio. Devido certamente a uma menor rigidez da sua estrutura polimérica, um maior rendimento na síntese (cerca de 80%) foi obtido com a primeira resina. A seguir, os peptídeos DEVYEHPF-NH2 e DEVYEDPF-NH2 carregados negativamente (-1 e -3 em pH neutro, respectivamente), ambos sintetizados em 1% BHAR, foram submetidos a um teste de separação cromatográfica no mesmo tipo de resina (1% e 3%). Concordante com resultados da síntese de peptídeos e de valores de inchamento dos grãos das resinas, obtidos por microscopia, uma melhor separação entre ambos os peptídeos ocorreu com o lote de 1% BHAR. Estes achados demonstraram que a BHAR, aplicada até o momento somente para a síntese peptídica, se contiver elevado teor de grupos amônio positivos, pode ser utilizada alternativamente como suporte sólido para purificação cromatográfica deste tipo de molécula biológica.

This work reveals an uncommon but valuable biotechnological approach regarding the use of a same polymer (benzhydrylamine-resin, BHAR) for synthesis and anion exchange purification of peptides. Initially, the octapeptide DRVYIHPF-NH2 was synthesized in 1% and 3% cross-linked BHAR, attaching 2.5 mmol g-1 ammonium groups. Due certainly to its less rigid polymeric backbone, higher synthesis yield (about 80%) was achieved with the former resin. Next, the negatively charged peptides DEVYEHPF-NH2 and DEVYEDPF-NH2 (-1 and -3 in neutral pH, respectively), both synthesized in 1% BHAR were submitted to chromatographic separation test in this same type of resin (1% and 3%). Following comparative results of peptide synthesis and swelling data of resin beads obtained by microscopy, an improved separation of both peptides occurred with 1% BHAR batch. These findings demonstrated that BHAR applied so far for peptide synthesis, when containing high amount of positively charged ammonium groups, can be also used alternatively as a solid support for chromatographic purification of this type of biological molecule.