Abstract Orthodontics patients usual develop demineralization and present cavity caries lesions after six months. Minimally invasive procedures have been the goal in modern dental practice. The aim of this study was to evaluate the effect of ClinproTMXT Varnish, on the enamel surface roughness and severity of white spot lesions. Twenty premolars were submitted to bond brackets and experimental induction of demineralization and randomly divided into 2 groups: GI - fluoride varnish (Colgate Duraphat®); GII - Ionomeric Sealant (ClinproTMXT Varnish). The treatment was applied around the brackets. The surface roughness of specimens was analyzed, before treatment and 12 weeks after treatment by laser confocal microscopy, and the severity of the white spot lesion was by laser fluorescence device. The data were analyzed by non-parametric Wilcoxon and Mann-Whitney Test, at 5% significance, roughness percentage reduction was performed. The severity of demineralization decreased in both, GI (p = 0.005) and GII (p = 0.019). Enamel superficial roughness levels decreased in GI and GII. As well as the roughness percentage, being more expressive in the ClinproTMXT Varnish group (85,09%). Colgate Duraphat® or Clinpro™ XT Varnish reduced the severity of the demineralization and decreased the superficial roughness on the enamel. The Clinpro™ XT Varnish was superior to superficial roughness on enamel.

Resumo Pacientes ortodônticos geralmente desenvolvem desmineralização e apresentam lesões de cárie após seis meses de tratamento. Procedimentos minimamente invasivos têm sido o objetivo na prática odontológica moderna. O objetivo deste estudo foi avaliar o efeito do ClinproTM XT selante ionomérico, ao redor do bráquete, com relação a rugosidade superficial do esmalte e a severidade da lesão induzida. Vinte pré-molares foram submetidos a colagem de bráquetes e indução experimental de desmineralização e divididos aleatoriamente em 2 grupos: GI - verniz fluoretado (Colgate Duraphat®); GII - Selante Ionomérico (ClinproTM XT). O tratamento foi aplicado ao redor dos bráquetes. A rugosidade da superfície dos espécimes foi analisada, antes do tratamento e 12 semanas após o tratamento por microscopia confocal a laser e severidade da lesão de mancha branca por dispositivo de fluorescência a laser. Os dados foram analisados pelo teste não paramétrico de Wilcoxon e Mann-Whitney, a 5% de significância. A taxa de redução da lesão foi calculada. A severidade da desmineralização diminuiu tanto no GI (p = 0,005) quanto no GII (p = 0,019). Os níveis de rugosidade superficial do esmalte diminuíram no GI e GII, assim como o percentual de rugosidade, sendo mais expressivo no grupo ClinproTMXT (85,09%). Colgate Duraphat® e Clinpro™ XT reduziram a severidade da desmineralização e diminuíram a rugosidade superficial do esmalte. O selante ionomérico Clinpro™ XT foi superior na redução percentual de rugosidade.

Resumo O objetivo do presente estudo in vivo foi avaliar a contaminação bacteriana de protetores bucais esportivos, a rugosidade da superfície e a eficácia do spray de gluconato de clorexidina na desinfecção desses dispositivos. Um ensaio clínico randomizado, cego, cruzado foi realizado com vinte crianças de 9 a 13 anos, que praticavam artes marciais, participaram de todas as fases do estudo. As crianças foram orientadas a usar o protetor bucal por 3 dias alternados durante 1 hora e, após o uso, borrifar água de torneira estéril ou clorexidina 0,12%. Os protetores foram analisados por ensaio MTT, Hibridização DNA-DNA e microscopia confocal a laser antes e após o uso por 2 semanas. Os dados foram analisados pelos teste de Wilcoxon, teste t de Student, e correlação de Pearson, com nível de significância de 5%. Observou-se que os protetores bucais do grupo controle estavam mais contaminados com microrganismos cariogênicos do que os do grupo experimental (clorexidina) (p <0,05). O uso de protetores bucais com spray de clorexidina reduziu significativamente a contaminação bacteriana em relação ao grupo controle (p = 0,007). A rugosidade da superfície dos protetores bucais aumentou significativamente após o uso, independentemente da aplicação de spray de clorexidina. Uma correlação moderada (r = 0,59) foi observada entre a rugosidade da superfície e a contaminação do micro-organismo apenas para o grupo controle. Os protetores bucais esportivos apresentam intensa contaminação microbiana e aumento da rugosidade superficial após o uso. O uso de spray de clorexidina foi eficaz para reduzir a contaminação dos protetores bucais usados por crianças.

Abstract The aim of the present in vivo study was to evaluate the bacterial contamination of sports mouthguards, surface roughness, and the efficacy of chlorhexidine gluconate spray in the disinfection of these devices. A randomized, blinded cross-over clinical trial was performed with twenty 9 to 13 years old children who practiced martial arts and participated in all phases of the study. They were instructed to wear mouthguards 3 alternated days a week for 1 hour and, after use, to spray sterile tap water or chlorhexidine 0.12%. The mouthguards were analyzed by MTT assay, Checkerboard DNA-DNA hybridization, and confocal laser microscopy prior and after use for 2 weeks. Data were analyzed by Wilcoxon and t-Student, and Pearson correlation tests, with 5% significance level. Were observed that mouthguards of the control group were more contaminated with cariogenic microorganisms than those of the chlorhexidine group (p<0.05). The mouthguards use of spray of chlorhexidine reduced significantly the bacteria contamination compared with control group (p = 0.007). The surface roughness of the mouthguards increased significantly after use, irrespective of application of chlorhexidine spray. A moderate correlation (r=0.59) was observed between surface roughness and the cariogenic microorganism’s contamination only for control group. Sports mouthguards had intense microbial contamination and increased surface roughness after its use. The use of chlorhexidine spray was effective for reducing the mouthguards contamination used by children.

Resumo Este estudo in vitro avaliou a homogeneidade do feixe de um fotopolimerizador de múltiplos picos na microdureza superficial e o efeito da escovação na microdureza, rugosidade superficial, perfil de rugosidade, perda de volume e retenção do brilho de compósitos a base de resina (RBCs) incrementais ou bulk-fill. Um fotopolimerizador LED (VALO) com quatro LEDs na ponteira (405, 445, 465A e 465B nm de pico de emissão) foi usado de acordo com o tempo recomendado por cada fabricante para obtenção de discos (n=10) de seis RBCs: Estelite Sigma Quick, Charisma Classic, Tetric EvoCeram Bulk Fill, Filtek Z250, Filtek Supreme Ultra e Filtek Bulk Fill. Os valores de microdureza foram obtidos seguindo o posicionamento de cada LED na superfície superior das amostras e foram analisados antes e após a escovação quanto a microdureza, rugosidade superficial, perfil de rugosidade, perda de volume e retenção do brilho. A microdureza foi considerada homogênea no topo da superfície, independentemente do tipo de RBCs ou comprimento de onda testados (p>0.05). No geral, a escovação não reduziu a microdureza das RBCs, mas influenciou o brilho para a maioria das RBCs (p<0.001). Charisma Classic apresentou os maiores valores de rugosidade superficial e perfil de rugosidade após a escovação (p<0.05). A perda de volume não diferiu entre as RBCs (p>0.05). Em conclusão, os diferentes comprimentos de onda do LED não alteraram a microdureza do topo da superfície, independentemente das RBCs testadas; e as resinas bulk-fill apresentaram alterações superficiais similares (microdureza, rugosidade superficial, perfil de rugosidade, perda de volume e manutenção do brilho) quando comparadas às resinas convencionais após a escovação.

Abstract This in vitro study evaluated the effect of the beam homogeneity of a multiple-peak light-curing unit on the surface microhardness and the effect of toothbrushing wear on the microhardness, surface roughness, roughness profile, volume loss, and gloss retention of incremental and bulk-fill resin-based composites (RBCs). A LED light-curing unit (VALO) with four LEDs at the tip end (405, 445, 465A, and 465B nm emission peak) was used according to each manufacturer-recommended time to obtain disks (n=10) of six RBCs: Estelite Sigma Quick, Charisma Classic, Tetric EvoCeram Bulk Fill, Filtek Z250, Filtek Supreme Ultra, and Filtek Bulk Fill. Microhardness values were obtained according to each LED positioning of the light-curing unit on the top surface of the RBCs and were analyzed before and after toothbrushing regarding microhardness, surface roughness, roughness profile, volume loss, and gloss retention. Microhardness was considered homogeneous on the top surface regardless of the type of RBC or wavelength tested (p>0.05). Overall, toothbrushing did not reduce the microhardness of the RBCs but influenced the gloss values for most RBCs (p<0.001). Charisma Classic presented the greatest surface roughness and roughness profile after toothbrushing (p<0.05). Volume loss did not differ among RBCs (p>0.05). In conclusion, different wavelengths of the LED did not affect the top surface microhardness, regardless of the RBCs tested; and bulk-fill composites presented similar surface changes (microhardness, surface roughness, roughness profile, volume loss, and gloss retention) when compared to conventional composites after toothbrushing.

Abstract This study evaluated how Er,Cr:YSGG laser, associated or not with 5% fluoride varnish, influences the surface roughness and volume loss of bovine root dentin submitted to erosive and/or abrasive wear. One hundred and twenty dentin specimens were divided into the groups: without preventive treatment (WPT), 5% fluoride varnish (FV); Er,Cr:YSGG laser irradiation (L), and varnish combined with laser (FV + L). The specimens (n = 10) were subdivided into: 1 = erosion (E); 2 = abrasion (A); and 3 = erosion followed by abrasion (E + A). The erosive solution used was a soft-drink (pH = 2.42 at 4ºC) applied in 5-min cycles twice a day for 10d. Abrasive wear involved brushing for 60s with an electric brush (1,600-oscillations/s) at a load of 2.0N. Surface roughness and volume loss were evaluated using a laser scanning confocal microscope. Roughness data were submitted to one-way ANOVA and Tukey post-hoc test. For volume loss, the Kruskal-Wallis and Dunn’s post-hoc tests were used (α = 5%). The lowest values of roughness were found in the control areas of all subgroups (p > 0.05). In the experimental area, the [(WPT) + (E+A)] subgroup had a significantly higher roughness (5.712 ± 0.163 μm 2 ) than the other subgroups (p < 0.05). The L and (FV + L) groups had statistically similar roughness, regardless of the type of wear. The (FV + L) group had the lowest volume loss, regardless of the type of wear performed: [(FV + L) + (E)] = 7.5%, [(FV + L) + (A) = 7.3%, and [(FV + L) + (E + A)] = 8.1%. The subgroup [(WPT) + (E + A)] had the highest volume loss (52.3%). The proposed treatments were effective in controlling dentin roughness. Laser irradiation can be an effective method to increase root dentin resistance after challenges and limit problems related to non-carious lesions.

RESUMO Um padrão estético ideal consiste na harmonia facial e do sorriso. Dentes descoloridos geralmente causam um desequilíbrio na estética facial, levando a baixa auto-estima e interferência nas relações sociais. As causas da descoloração dos dentes são classificadas como intrínsecas ou extrínsecas. O clareamento é considerado um tratamento seguro e eficaz para os dentes não vitais escurecidos e pode ser associado ao tratamento restaurador para corrigir adequadamente a cor dental e maximizar os resultados estéticos. O objetivo deste trabalho é apresentar dois relatos de casos de dentes anteriores não vitais escurecidos e o protocolo utilizado para restabelecer a harmonia dentária desses pacientes por meio de clareamento e restauração direta em resina composta. Para exercer uma Odontologia minimamente invasiva é muito importante preservar a estrutura dentária e reduzir o risco de fratura. O clareamento interno, embora possa não ser suficiente para restabelecer a estética em alguns casos, é importante para minimizar o preparo dental para realizar uma restauração indireta ou direta. Os dentistas devem levar em consideração as expectativas dos pacientes, dominar a técnica restauradora e conhecer os materiais dentários para poder restaurar adequadamente a função e a estética e, consequentemente, melhorar a qualidade de vida e as relações sociais.

ABSTRACT An ideal aesthetic standard consists of facial and smile harmony. Discolored teeth generally cause an imbalance in facial aesthetics, leading to low self-esteem and disturbance in social relationships. Causes of teeth discoloration are classified as intrinsic or extrinsic. Bleaching is considered a safe and effective treatment for discolored nonvital teeth and can be associated with restorative treatment to properly correct the dental color and maximize the aesthetic results. This paper aims to present two case reports of single discolored nonvital anterior teeth and the protocol used to reestablish the dental harmony of these patients by bleaching and direct composite resin restoration. To exert minimally invasive dentistry is very important to preserve tooth structure and reduce the risk of fracture. Internal bleaching, although may not be sufficient to reestablish the aesthetic in some cases, it is important to minimize dental preparation to perform an indirect or direct restoration. Dentists must take into account the patients expectations, dominate the restorative technique and know the dental materials to properly be able to restore function and aesthetics and consequently improve life quality and social relationships.

Abstract: The effects of tooth brushing could affect the long-term esthetic outcome of composite restorations. This study evaluated the effect of two different emission spectrum light-curing units on the surface roughness, roughness profile, topography and microhardness of bulk-fill composites after in vitro toothbrushing. Valo (multiple-peak) and Demi Ultra (single-peak) curing lights were each used for 10s to polymerize three bulk-fill resin composites: Filtek Bulk Fill Posterior Restorative (FBF), Tetric EvoCeram Bulk Fill (TET) and Surefil SDR Flow (SDR). After 30,000 reciprocal strokes in a toothbrushing machine, the roughness profile, surface roughness, surface morphology, and microhardness were examined. Representative SEM images were also obtained. When light-cured with the Demi Ultra, SDR showed the most loss in volume compared to the other composites and higher volume loss compared to when was light-cured with Valo. The highest surface roughness and roughness profile values were found in SDR after toothbrushing, for both light-curing units tested. FBF always had the greatest microhardness values. Light-curing TET with Valo resulted in higher microhardness compared to when using the Demi Ultra. Confocal and SEM images show that toothbrushing resulted in smoother surfaces for FBF and TET. All composites exhibited surface volume loss after toothbrushing. The loss in volume of SDR depended on the light-curing unit used. Toothbrushing can alter the surface roughness and superficial aspect of some bulk-fill composites. The choice of light-curing unit did not affect the roughness profile, but, depending on the composite, it affected the microhardness.

Resumo O objetivo deste estudo foi avaliar os estágios iniciais e a evolução da erosão do esmalte dental causado pela exposição ao ácido clorídrico, simulando assim episódios de refluxo gastroesofágico, usando um microscópio de força atômica (AFM). Fragmentos de esmalte bovino planificados e polidos (4x4x2 mm) foram selecionados e exposto a 0,1 mL de ácido clorídrico 0,01 M (pH = 2) a 37 ?#61616;C, utilizando cinco intervalos diferentes de exposição: sem exposição ao ácido (controle) e 10 s, 20 s, 30 s e 40 s. Então, a área exposta foi analisada com AFM em 3 regiões diferentes para mensurar a rugosidade, a área da superfície e a morfologia superficial. Os dados foram analisados qualitativamente. Inicialmente, a rugosidade apresentou valor baixo como a amostra controle, Rrms=3,5 nm, e aumentou gradualmente a uma taxa de 0,3 nm/s, até Rrms= 12,5 nm a 30 s. Após 40 s, a rugosidade apresentou um incremento de apenas 0,40 nm. Área de superfície (SA) aumentou até 20 s, e para exposições mais longas, a área de superfície manteve-se constante (30 s, o SA=4,40 μm2, e em 40 s, a SA=4,43 μm2). Em relação à morfologia superficial, a amostra controle apresentou cristais de hidroxiapatita menores (22 nm), e após 40s o tamanho do cristal era de aproximadamente 60 nm. Períodos curtos de exposição foram suficientes para produzir a desmineralização do esmalte em diferentes padrões e a estrutura morfológica foi menos afetada pela exposição ao ácido clorídrico acima de 30 s.

Abstract The aim of this study was to evaluate by atomic force microscopy (AFM) the early phases and evolution of dental enamel erosion caused by hydrochloric acid exposure, simulating gastroesophageal reflux episodes. Polished bovine enamel slabs (4x4x2 mm) were selected and exposed to 0.1 mL of 0.01 M hydrochloric acid (pH=2) at 37 ?#61472;?#61616;C using five different exposure intervals (n=1): no acid exposure (control), 10 s, 20 s, 30 s and 40 s. The exposed area was analyzed by AFM in 3 regions to measure the roughness, surface area and morphological surface. The data were analyzed qualitatively. Roughness started as low as that of the control sample, Rrms=3.5 nm, and gradually increased at a rate of 0.3 nm/s, until reaching Rrms=12.5 nm at 30 s. After 40 s, the roughness presented increment of 0.40 nm only. Surface area (SA) increased until 20 s, and for longer exposures, the surface area was constant (at 30 s, SA=4.40 μm2 and at 40 s, SA=4.43 μm2). As regards surface morphology, the control sample presented smaller hydroxyapatite crystals (22 nm) and after 40 s the crystal size was approximately 60 nm. Short periods of exposure were sufficient to produce enamel demineralization in different patterns and the morphological structure was less affected by exposure to hydrochloric acid over 30 s.

The use of erbium lasers to prevent caries in enamel has shown positive results. However, it is not known if Er,Cr:YSGG laser can also be used to increase acid resistance of root dentine, which is another dental tissue susceptible to the action of cariogenic bacteria. Objective: To analyze the effects of the Er,Cr:YSGG laser (λ=2.78 μm, 20 Hz) irradiation associated with 2% neutral sodium fluoride (NaF) to prevent root dentin demineralization. Material and Methods: One hundred human root dentin samples were divided into 10 groups (G) and treated as follows: G1: no treatment; G2: NaF; G3: laser (4.64 J/cm2) with water cooling (WC=5.4 mL/min); G4: laser (4.64 J/cm2) without WC; G5: laser (8.92 J/cm2) with WC; G6: laser (8.92 J/cm2) without WC; G7: laser (4.64 J/cm2) with WC and NaF; G8: laser (4.64 J/cm2) without WC and NaF; G9: laser (8.92 J/cm2) with WC and NaF; G10: laser (8.92 J/cm2) without WC and NaF. The NaF gel was applied alone or after 4 min of irradiation. After 14 days of acid challenge, the samples were sectioned and the Knoop microhardness (KHN) test was done at different depths (30, 60, 90 and 120 μm) from the outer dentin surface. Data were analyzed by one-way ANOVA and Fisher’s test (α=5%). Results: The results showed that G8 and G10 presented higher KHN than the G1 for the depths of 30 and 60 μm, indicating an increase of the acid resistance of the dentin in up to 35% (p<0.05). Conclusions: The use of Er,Cr:YSGG laser irradiation at 4.64 J/ cm2 and 8.92 J/cm2 without water cooling and associated with 2% NaF can increase the acid resistance of human root dentin.

A maioria dos estudos que utilizam o laser Nd:YAG com ação preventiva são em dentes permanentes, e são escassos os estudos em dentes decíduos. Desta forma, o objetivo do presente estudo foi avaliar in vitro o efeito do laser Nd: YAG combinado ou não com flúor na resistência ácida do esmalte decíduo após a indução de cárie artificial, através da avaliação de microdureza longitudinal e profundidade da desmineralização. Para tanto, foram selecionados 60 fragmentos de esmalte obtidos a partir da superfície bucal / lingual de molares decíduos irrompidos, os quais foram isolados com esmalte de unha e cera, deixando uma área exposta de 9 mm² na superfície do esmalte. Os espécimes foram divididos aleatoriamente em 6 grupos (n = 10) de acordo com o tipo de tratamento: C- Controle: sem tratamento; APF: aplicação de gel flúor fosfato acidulado 1,23%; FV: aplicação de verniz fluoretado 5%; L: aplicação do Laser Nd:YAG 0,5 W/10 Hz no modo contato; APFL: aplicação de gel flúor fosfato acidulado + Laser Nd:YAG; FVL: aplicação de verniz fluoretado 5% + Laser Nd:YAG. Após os tratamentos, os espécimes foram submetidos a um ciclo de desremineralização para a indução de lesão de cárie artificial. Os dados de microdureza longitudinal (%LMC) foram avaliados pelo teste de Kruskal-Wallis e os dados de profundidade da desmineralização foram avaliados pelos testes ANOVA e Fisher’s LSD (α=5%). Observou-se que os grupos APFL e APF apresentaram menor percentual de perda de dureza (p<0,05). A profundidade de desmineralização foi menor em todos os grupos tratados em comparação com o controle. Em conclusão, o laser Nd: YAG associado ou não com flúor/verniz não foi mais efetivo do que o flúor sozinho para prevenir a desmineralização do esmalte durante o período experimental.

Most studies dealing with the caries preventive action of Nd:YAG laser have been done in permanent teeth and studies on primary teeth are still lacking. The aim of this study was to evaluate in vitro the effect of Nd:YAG laser combined or not with fluoride sources on the acid resistance of primary tooth enamel after artificial caries induction by assessing longitudinal microhardness and demineralization depth. Sixty enamel blocks obtained from the buccal/lingual surface of exfoliated human primary molars were coated with nail polish/wax, leaving only a 9 mm² area exposed on the outer enamel surface, and randomly assigned to 6 groups (n=10) according to the type of treatment: C-control (no treatment); APF: 1.23% acidulated phosphate fluoride gel; FV: 5% fluoride varnish; L: Nd:YAG laser 0.5 W/10 Hz in contact mode; APFL: fluoride gel + laser; FVL: fluoride varnish + laser. After treatment, the specimens were subjected to a des-remineralization cycle for induction of artificial caries lesions. Longitudinal microhardness data (%LMC) were analyzed by the Kruskal-Wallis test and demineralization depth data were analyzed by oneway ANOVA and Fisher’s LSD test (á=0.05). APFL and APF groups presented the lowest percentage of microhardness change (p<0.05). Demineralization depth was smaller in all treated groups compared with the untreated control. In conclusion, Nd:YAG laser combined or not with fluoride gel/varnish was not more effective than fluoride alone to prevent enamel demineralization within the experimental period.