Abstract Aluminum alloys have been widely used in multiple applications, such as in civil construction and engine pistons. They are subjected to loads that may impair their mechanical properties. Thereby, this research aims to study the influence of anodization on the mechanical properties of alloy samples and evaluate the behavior of oxide films when subjected to tensile testing. The mechanical properties of specimens have been evaluated based on tensile and Knoop hardness tests, and strain, tensile strength, and modulus of elasticity of specimens have been determined based on the stress-strain curve. The morphology of oxide films was analyzed by scanning electron microscopy (SEM) and optical microscopy (OM). Results of anodized Al-Si alloys in both modes, i.e. pulsed and direct currents, were compared, and it was found that pulsed current was more efficient than direct current with respect to uniformity of the formed film, and that the anodization process can affect a few mechanical properties of samples. The tension testing results also revealed that the oxide film has been fractured perpendicularly towards traction. However, the oxide film hardness was not affected by the anodization mode (pulsed or direct currents). In addition, a heat treatment was efficient at improving the uniformity of anodic films.

RESUMO Cupuaçu (Theobroma grandiflorum Schum.) é uma fruta exótica, com potencial econômico promissor, especialmente devido ao seu forte aroma e textura cremosa. O objetivo deste estudo foi produzir um doce de cupuaçu e avaliar os efeitos da corrosão da embalagem sobre as propriedades sensoriais e vida útil do produto acondicionado em latas de folha de flandres. Após 240 dias de armazenamento, o produto comercialmente estéril teve pontuações médias de aceitação sensorial de 5,89 ± 0,21, 5,39 ± 0,30, 5,45 ± 0,21 e 5,49 ± 0,25, para a aparência, aroma, sabor e impressão global, respectivamente. As aceitações sensoriais não apresentaram alterações durante o armazenamento (p>0,05). Medidas de potencial de corrosão e os baixos níveis de estanho e ferro no produto, que são parâmetros utilizados para avaliar a interação entre embalagem e alimento, demonstraram a segurança do produto ao longo da vida de prateleira. Os resultados obtidos mostraram que a folha de flandres é um material de embalagem promissor para o doce de cupuaçu devido às suas propriedades mecânicas e de proteção. O estudo demonstrou ainda que o processamento e acondcionamento em latas estanhadas é uma tecnologia economicamente viável para estender a vida de prateleira de produtos de cupuaçu e expandir seus mercados nacional e internacional.

ABSTRACT Cupuaçu (Theobroma grandiflorum Schum.) is an exotic fruit with a promising economic potential, particularly due to its strong aroma and creamy texture. This study aimed to produce sweetened cupuaçu puree and evaluate the effects of packaging corrosion on its sensory properties and shelf-life in tinplated cans. After 240 days of storage, the commercially sterile product had average sensory analysis scores of 5.89 ± 0.21, 5.39 ± 0.30, 5.45 ± 0.21 and 5.49 ± 0.25, for appearance, aroma, flavor and overall appreciation, respectively. Sensory acceptance scores did not change during storage (p>0.05). Corrosion potential and low tin and iron levels in the product, which are parameters used to evaluate food-packaging interaction, demonstrated the product remained food-safe throughout its shelf-life. Tinplate is a promising packaging material for sweetened cupuaçu puree due to its mechanical and protective properties. Furthermore, tin plating is an economically viable food technology to extend the shelf-life of cupuaçu products and expand its domestic and international markets.

AA 2024 aluminum alloy is widely employed in aeronautic and automobilist industries. Its hardness and low density are attractive properties for such industrial areas. However, since it contains copper, it undergoes severe corrosion in aggressive media as saline or low Earth orbit environments. In this work, it was investigated the properties of films deposited by PECVD on AA 2024 aluminum alloy as well as the corrosion resistance of the film/substrate systems under different corrosive atmospheres. Films were prepared in a plasma atmosphere composed of 50% of oxygen and 50% of hexamethyldisiloxane resulting in a total gas pressure of 4.0 Pa. Plasma ignition was promoted by the application of radiofrequency signal (13.56 MHz) to the sample holder while grounding the topmost electrode. The plasma excitation power, P, was changed from 10 to 80 W in the six different set of experiments. Film thickness, measured by profilometer, increases by 5 times as P was elevated from 10 to 80 W. As demonstrated by the infrared spectra of the samples, films are essentially organosilicons with preservation of functional groups of the precursor molecule and with creation of different ones. The oxide proportion and the structure crosslinking degree are affected by the plasma excitation power. According to the results obtained by sessile drop technique, hydrophilic to moderately hydrophobic films are produced with changing P from 10 to 80 W. The corrosion resistance, evaluated by salt spray and electrochemical impedance spectroscopy, EIS, experiments, in general increases after film deposition. It is demonstrated that film deposition improves, in up to 36 times, the resistance of the alloy to salt spray attack. It is also shown an improvement of about 240 times in the alloy resistance under NaCl solution by the EIS data. Micrographs acquired by Scanning Electron Microscopy after the corrosion tests furnish further information on the importance of the layer physical stability on its barrier properties. Furthermore, films highly protect the alloy against the oxygen attack. Interpretations are proposed based on the modification of the plasma kinetics with P, altering film structure, composition and properties.

The development of hybrids materials has been extensively investigated in recent years. The combination of a wide variety of compositions and production processes had permitted the use of these materials in different applications like coatings for corrosion protection of metals. In this work organic-inorganic hybrid materials have been prepared from the hydrolysis of tetraethylorthosilicate and silanol-terminated polidymetilmetoxysilane using a sol-gel process. These materials have been applied on galvanized steel and on steel electroplated with a ZnFe. In order to evaluate the degradation behavior of these coatings, electrochemical techniques (Electrochemical Impedance Spectroscopy and Potentiodynamic Polarization) were used. EIS data was fitted to an equivalent circuit from which the electrochemical parameters were obtained. Results show a good protective character of the hybrid films, when compared with uncovered specimens. The overall performance of the coating systems appears to be highly dependent on the kind of metallic coating applied to the steel.