ABSTRACT: The energy characteristics and theoretical performance of the hybrid rocket fuels are discussed in this paper. Aluminum (Al) and boron (B) metal additives were used to increase the energy density of the paraffin-based solid fuels. To predict the energy characteristics, the heat of combustion was evaluated by adiabatic bomb calorimetry. Theoretical performance parameters such as specific impulse (Isp), flame temperature, and characteristic velocity were obtained with NASA Chemical Equilibrium with Applications (CEA) code. Calorimetric test results revealed that paraffin/polyethylene/boron (P/PE/B)-based fuel formulations exhibited the highest heat of combustion among all the tested fuels. The heat of combustion value of the P/PE/B sample at 25 wt% B loading was found to be 9612 ±16 cal/g and 9293±17 cal/g for the P/PE/Al fuel formulation. The CEA results showed that the addition of Al to paraffin is noneffective in improving specific impulse performance. When B loading increased from 5 to 25 wt% in the P/PE/B, the Isp increased by 47 s compared to pure paraffin. A specific impulse increase implies the possible propellant mass saving. The reduction of the oxidizer and fuel masses may yield increased payload performance for given boundary conditions. The P/PE/B25 formulation has reported the highest value of characteristics velocity (C*) compared to other paraffin-based formulation.

This paper presents the effect of nonlocal scaling parameter on the coupled i.e., axial, flexural, shear and contraction, wave propagation in single-walled carbon nanotubes (SWCNTs). The axial and transverse motion of SWCNT is modeled based on first order shear deformation theory (FSDT) and thickness contraction. The governing equations are derived based on nonlocal constitutive relations and the wave dispersion analysis is also carried out. The studies shows that the nonlocal scale parameter introduces certain band gap region in all wave modes where no wave propagation occurs. This is manifested in the wavenumber plots as the region where the wavenumber tends to infinite or wave speed tends to zero. The frequency at which this phenomenon occurs is called the escape frequency. Explicit expressions are derived for cut-off and escape frequencies of all waves in SWCNT. It is also shown that the cut-off frequencies of shear and contraction mode are independent of the nonlocal scale parameter. The results provided in this article are new and are useful guidance for the study and design of the next generation of nanodevices that make use of the coupled wave propagation properties of single-walled carbon nanotubes.