Carbamazepine is an antiepileptic drug which is considered one of the persistent compounds detected in Malaysian aquatic environment. In this present study, a full factorial experimental design was applied for the analysis of effect NaCl amount, initial concentration of carbamazepine, applied voltage and treatment time on the electrochemical removal percentage of carbamazepine. However, applied voltage was found as the most significant factor with p = 0.00 lower than 95% confidence level. The investigation of effect NaCl and Na2SO4 on the pathway degradation for carbamazepine was provided using liquid chromatography-time of flight/mass spectrometry (LC-TOF/MS). The results showed that new by-products were identified such chloro-epoxy carbamazepine, and other by-products, were detected in the presence of NaCl and Na2SO4 electrolytes. High inhibition percentage of Escherichia coli (E. coli) bacteria was observed at 24.0 h incubation time for both NaCl and Na2SO4 electrolytes after 80 and 20 min of treatment, respectively.

Abstract The study aims to determine the dynamic properties of high volume fly ash nanosilica (HVFANS) concrete exposed to strain rates between 30.12 to 101.42 s-1 and temperatures of 25, 400, and 700 oC by using split Hopkinson pressure bar (SHPB) machine. The static and dynamic compressive strengths of HVFANS concrete were slightly lower than plain concrete (PC) at room temperature, while its values were higher at 400 and 700 o C. The results proved that the CEB model of dynamic increase factor is more reliable to estimate the behaviour of HVFANS concrete at studied temperatures. The toughness, critical strain, and damage of HVFANS concrete recorded a superior performance than PC under studied strain rates and temperatures that would reflect the possibility of use HVFANS concrete in structures to improve its resistant of fire and impact loads, as well as to decrease the demand on Portland cement which could lead to restrict the risks of liberated gases during cement production. Furthermore, equations were proposed to estimate the dynamic increase factor, toughness, and critical strain of both concretes under investigated conditions.

The present work reports the occurrence and monitoring of 11 pharmaceuticals (i.e., caffeine, prazosin, enalapril, carbamazepine, nifedipine, gliclazide, levonorgestrel, simvastatin, hydrochlorothiazide, diclofenac-Na and mefenamic acid) in surface water and in the influent and effluent of sewage treatment plants (STPs) and hospitals (HSPs). A total of 105 water samples were analyzed using solid-phase extraction combined with liquid chromatography-time-of-flight/mass spectrometry (SPE-LC-TOF/MS). The mean concentrations of the detected pharmaceuticals in STP influent and effluent ranged from < limit of quantification (LOQ) to 3909 ng L−1 and 12 to 577 ng L−1, respectively. The mean concentrations of the detected pharmaceuticals in the hospital influent and effluent ranged from 28 to 1644 ng L−1 and 20 to 1540 ng L−1, respectively. The highest concentration detected in the sampling points was 9099 ng L−1 for caffeine in influent STP. The presence of prazosin has never been reported before in literature. In this study, prazosin was detected in all studied samples, and the highest concentration was 525 ng L−1 in influent STP. Chemometric analysis was used to assess the presence of pharmaceuticals in samples.

The preparation of a new carbon composite electrode constructed from graphite-polyvinyl chloride (graphite-PVC) compressed mixtures was used for the first time to treat landfill leachate in Malaysia under electrochemical oxidation. The electrochemical oxidation of landfill leachate was studied on graphite-PVC and Pt electrodes as anode and cathode, respectively, with the presence of NaCl electrolyte in a batch electrochemical reactor. The highest chemical oxygen demand (COD) and color removals of 87% and 97%, respectively, were achieved at pH 3, 0.58% (m/v) + 2078 mg L-1 electrolyte concentration, 15 V applied voltage, and 105 min electrolysis time. To confirm electrochemical oxidation, a field emission scanning electron microscopy (FESEM) was used to evaluate the surface of graphite-PVC electrode before and after treatment. The constant rate in terms of pseudo-first-order kinetics increased from 0.0015 min-1 to 0.0186 min-1 at 5 and 20 V applied voltage. The graphite-PVC composite exhibits favorable qualities as an electrode material because of its mechanical resistance, low cost, simple preparation, and easy renewal of the electrode surface.