The epoxy resin is one of the matrices most employed in obtaining composites and coatings. Its properties have been modified using materials such as clays and polyhedral oligomeric silsesquioxanes - POSS. The use of POSS in the preparation of thermosetting nanocomposites has been studied in obtaining hybrid materials with higher mechanic and surface properties. The functionality of POSS cage is important, since a thermosetting is formed by a cross-linked structure that can interact at any direction, forming bonds or acting in the interface of the cages inserted. This works aims to evaluate the influence of three POSS (Glycidylisobutyl-POSS, Triglycidylisobutyl-POSS and Glycidyl-POSS) added in epoxy resin, in the mechanic and electrochemical behaviors, when applied on low alloy steel. It was observed an increase in roughness and hydrophobicity. The sample containing Glycidylisobutyl-POSS presented the best results of corrosion resistance. Glycidyl-POSS showed an inefficient dispersion, forming agglomerates, leading to a low electrochemical behavior.

In this study, epoxy nanocomposites containing different fractions of n-phenylaminopropyl (POSS) were prepared. The nanocomposites were studied by transmission electron microscopy (TEM), gel content, dynamic-mechanical analysis (DMA) and thermogravimetric analysis (TGA). The parameters for Avrami's equation were calculated from the degradation curves. The dispersions used to form the nanocomposites were effective above 5 wt % of POSS, and the gel content increased with the addition of POSS. The DMA analysis exhibited an increase in the storage modulus (E') and a shifting of Tg to higher temperatures upon POSS incorporation. The weight loss indicated that the POSS promoted an increase in thermal stability of the epoxy resin. The Avrami parameters demonstrated that the addition of POSS decreased the Avrami constant (k'), increased the half-life (t1/2) of degradation and promoted changes in the Avrami exponent (n). These results suggest that the increase in the glass transition temperature and thermal stability depend on the reactive groups in the POSS nanoparticles.

The effect of grinded glass and sisal fibers (25 vol%) on the cure kinetics of composites of unsaturated polyester resin (UPR) was investigated by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The DSC analysis was carried out at four different heating rates (5, 10, 20 and 40 °C/min), and the cure enthalpy and activation energy (Ea) were determined according to the Flynn-Wall-Ozawa (FWO) method. The results showed that increasing heating rates promoted reduced reaction times. The sisal fiber-containing composites exhibit higher activation energy values for the cure process in comparison with the neat polyester resin and the glass fiber composites. This can be due to the presence of polar groups in the sisal components, which physically interact with the polyester resin and retard the cure reaction. Hence, as sisal fiber retarded the cure reaction of the UPR resin, it is suggested that the use of natural fibers in polymer matrix composites can affect the cure kinetics of the polyester resin.

Elastômeros vulcanizados são materiais comumente empregados em diversas aplicações, como nas indústrias automotiva e calçadista. Neste trabalho, aparas do terpolímero de etileno-propileno-dieno (EPDM-r) provenientes da indústria automotiva foram submetidas a micro-ondas durante diferentes tempos de exposição (2-5 min). Após a desvulcanização, as amostras foram caracterizadas por teor de gel, calorimetria exploratória diferencial (DSC) e energias de ativação de degradação (Ea) determinadas por análise termogravimétrica (TGA). O comportamento de degradação apresentou composição do EPDM-r condizente com a literatura. A análise de teor de gel demonstrou que o EPDM-r foi desvulcanizado quando exposto às micro-ondas por 5 minutos. As análises de DSC não indicaram modificações significativas nas amostras estudadas, e o estudo de Ea mostrou que os aditivos encontrados na composição do EPDM-r influenciam na eficiência do método de regeneração por micro-ondas.

Vulcanized elastomers are materials commonly used in several applications, such as automotive and footwear industries. In this study, scraps of ethylene-propylene-diene terpolymer (EPDM-r) from the automotive industry were exposed to microwaves during different periods (2-5 min). After devulcanization, the samples were characterized by gel content, differential scanning calorimetry (DSC) and activation energy of degradation (Ea) determined by thermogravimetric analysis (TGA). The degradation behavior of EPDM-r was consistent with the literature. The gel content analysis showed that the EPDM-r was devulcanized only at 5 minutes of exposure to the microwaves. DSC analysis demonstrated no significant changes in the samples, and the Ea results confirmed that the additives found in the composition of the EPDM-r affect the efficiency of the regeneration method.

O mercado de reciclagem para os polímeros termoplásticos encontra-se atualmente em acentuada ascensão. Os materiais reciclados são vistos como materiais de propriedades inferiores em relação ao material virgem. O presente trabalho avaliou as características viscoelásticas e térmicas do polietileno de baixa densidade (PEBD) reciclado. As amostras foram reprocessadas até dez vezes em condições extremas de processamento (300 °C/80 rpm) em uma extrusora monorosca, a fim de avaliar modificações estruturais nas suas propriedades. Foram realizadas análises de reometria oscilatória de placas paralelas e calorimetria exploratória de varredura (DSC). A partir das análises de reometria oscilatória foram calculados espectros de relaxação e retardação pelo programa de regularização não-linear (NLREG) e através das análises de DSC no primeiro aquecimento foram calculados os parâmetros cinéticos pelos métodos de Avrami e Freeman-Carroll. Os resultados do estudo reológico demonstraram que as amostras reprocessadas acima de quatro vezes apresentaram aumento da viscosidade complexa e dos módulos de armazenamento e perda, além de fenômenos de relaxação e retardação mais largos. Entretanto, os termogramas de DSC e os parâmetros cinéticos de fusão demonstraram que o PEBD estudado manteve sua estabilidade térmica, independentemente da modificação de suas características viscoelásticas.

The recycling market of thermoplastic polymers is currently in a sharp increase. Recycled materials are regarded as having inferior properties compared to the virgin material. Here we investigated the viscoelastic and thermal properties of the recycled low density polyethylene (LDPE). The samples were reprocessed up to ten times under extreme processing conditions (300 °C/80 rpm) in a single screw extruder in order to evaluate structural changes in their properties. Analyses were performed in an oscillatory rheometer with parallel plates and in a differential scanning calorimeter (DSC). From the analysis of the oscillatory rheometry, relaxation and retardation spectra were obtained upon applying a non-linear adjustment using a computational program (NLREG), while the kinetics parameters were estimated from the results of the first DSC heating using the Avrami and Freeman-Carroll methods. From the rheological study we inferred that the samples reprocessed more than four times had an increase in complex viscosity, storage and loss moduli, also displaying wider relaxation and retardation phenomena. However, the DSC thermograms and the melt kinetic parameters showed that the LDPE studied maintained their thermal stability, regardless of the modification in their viscoelastic properties.