The microencapsulation of palm oil may be a mechanism for protecting and promoting the controlled release of its bioactive compounds. To optimize the microencapsulation process, it is necessary to accurately quantify the palm oil present both external and internal to the microcapsules. In this study, we developed and validated a spectrophotometric method to determine the microencapsulation efficiency of palm oil by complex coacervation. We used gelatin and gum arabic (1:1) as wall material in a 5% concentration (w/v) and palm oil in the same concentration. The coacervates were obtained at pH 4.0 ± 0.01, decanted for 24 h, frozen (−40 ºC), and lyophilized for 72 h. Morphological analyzes were then performed. We standardized the extraction of the external palm oil through five successive washes with an organic solvent. We then explored the best method for rupturing the microcapsules. After successive extractions with hexane, we determined the amount of palm oil contained in the microcapsules using a spectrophotometer. The proposed method was shown to be of low cost, fast, and easy to implement. In addition, in the validation step, we confirmed the method to be safe and reliable, as it proved to be specific, accurate, precise, and robust.

O processo de co-cristalização consiste na concentração de um xarope de sacarose até a supersaturação, quando então é adicionado o material a ser encapsulado. A partir daí, a mistura é submetida a uma intensa agitação que induz à nucleação e à aglomeração do produto. Neste trabalho, a encapsulação de suco concentrado de maracujá em sacarose por co-cristalização foi avaliada, determinandose o efeito da fração de suco adicionada e do pH do suco sobre a umidade, solubilidade, densidade aparente e ângulo de repouso do produto final e acompanhando-se a cinética de cristalização em um reo-reator, constituído de um cristalizador acoplado a um reômetro rotacional de cilindros concêntricos, cujo cilindro interno foi substituído por um agitador. A cinética de co-cristalização foi representada por um modelo empírico ajustado aos dados obtidos. A co-cristalização foi acelerada em função do aumento do pH e da redução da porcentagem de suco. Os produtos co-cristalizados apresentaram menor umidade e maior solubilidade em baixas concentrações de suco. A densidade aparente e o ângulo de repouso foram similares aos da matriz encapsulante e situaram-se na faixa em que se encontram a maioria dos pós alimentícios.

Co-crystallization is an encapsulation process where a second ingredient is incorporated in a porous conglomerate of sucrose microcrystals formed by spontaneous crystallization. The process is carried out by concentrating a sucrose syrup until supersaturation and, then, adding the core material, with the mixture being submitted to an intensive agitation that leads to nucleation and product agglomeration. In the present work, encapsulation of passion fruit concentrated juice by co-crystallization with sucrose was evaluated by determining the effects of added juice fraction and juice pH on moisture content, solubility, apparent density and repose angle of final product, as well as by following the co-crystallization kinetics in a rheo-reactor, constituted of a crystallizer adapted to a concentric cylinders rotational rheometer, in which an agitator substitutes for the internal cylinder. The cocrystallization kinetics was described by an empirical model fitted to experimental data and the crystallization rate was accelerated with increasing pH and decreasing added juice fraction. The co-crystallized products presented lower moisture content and higher solubility at lower juice fractions. Apparent density and repose angle were similar to those reported for the encapsulating matrix and were in the range of values reported for most of food powders.