Abstract-Textile effluent is rich in hydrolyzed dyes that need to be removed. This study presents an evaluation of the potential of the enzyme horseradish peroxidase to remove the hydrolyzed dyes Reactive Blue 21 (RB 21) and Reactive Red 195 (RR 195) from cotton fiber and the effluent of the dyeing process. The parameters pH, dye concentration and temperature were evaluated to determine the optimal conditions to remove the dyes. The studies of removal of the dyeing effluent led to an increase of degradation for all tested colors. The use of the enzyme horseradish peroxidase as a biocatalyst can be a viable technological alternative to remove some hydrolyzed dyes.

Abstract Natural convection in superimposed layers of fluids heated from below is commonly observed in many industrial and natural situations, such as crystal growth, co-extrusion processes and atmospheric flow. The stability analysis of this system reveals a complex dynamic behavior, including the potential multiplicity of stationary states and occurrence of periodic regimes. In this study, a linear stability analysis (LSA) was performed to determine the onset of natural convection as a function of imposed boundary conditions, geometrical configuration and specific perturbations. To investigate the effects of the non-linear terms neglected in LSA, a direct simulation of the full nonlinear problem was performed using computational fluid dynamics (CFD) techniques. The numerical simulation results show an excellent agreement with the LSA results near the onset of convection and an increase in the deviation as the Rayleigh number increases above the critical value.

AbstractSingle-cycle firing is currently the most widespread method used for the production of ceramic tile. The productivity is directly related to the performance of the constituent materials of the ceramic piece during thermal cycling. Numerical tools which allow the prediction of the material behavior may be of great help in the optimization of this stage. This study addressed the mathematical modeling of the temperature profile within a ceramic tile, together with the sintering kinetics, to simulate the effect of the thermal cycle on the final size. On the laboratory scale, 80 mm x 20 mm specimens with thicknesses of 2.3 mm and 7.8 mm were prepared in order to determine the kinetic constants and validate the model. The application was carried out on an industrial scale, with 450 mm x 450 mm pieces that were 8.0 mm thick. These results show that the model was capable of predicting the experimental results satisfactorily.

In this study the immobilization of lipase in matrices produced with gelatin with different Bloom values and with the addition of plastifiers was investigated to evaluate the influence of the Bloom value, as well as the capacity of the plastifiers to maintain the enzyme immobilized and the immobilization yield. The results indicated the need for crosslinking of the matrices with glutaraldehyde due to the high solubility in water, explained by the amino acid profile, which confirms the solubility of gelatin. Mannitol showed greater efficiency in the lipase immobilization, since it led to more porous structures and more uniform pores. These structures were also influenced by the gelatin concentration; greater concentrations associated with intermediate concentrations of plastifier led to matrices with a greater immobilization yield (87.92%). The X-ray diffraction analysis revealed that the structure of the immobilization matrices was partially crystalline.

A adsorção é uma das técnicas empregadas com sucesso para remoção efetiva da cor presente em efluentes têxteis. Com o objetivo de avaliar os diferentes parâmetros adsortivos, bem como determinar a eficiência de um adsorvente alternativo desenvolvido a partir de lodo residual têxtil na remoção de corantes, foram determinadas curvas de cinética de adsorção e isotermas. Por meio dos dados cinéticos e de equilíbrio obtidos, verificou-se que a 25ºC a adsorção foi favorável para todos os corantes, sendo esta a melhor condição para os corantes RO16 e RR2 na ausência de sais. Para o corante RR141, a adição de NaCl aumentou a capacidade de adsorção do adsorvente no equilíbrio e a adição de Na2SO4 favoreceu a adsorção para o corante RO16, ao contrário do que se observou para os outros dois corantes. A quantidade máxima de corante adsorvida por unidade de massa de adsorvente (q max) nas melhores condições adsortivas para os corantes RO16, RR2 e RR141 foi de 81,30, 53,48 e 78,74 mg.g-1, respectivamente.

The adsorption is one of the techniques that have been successfully used for effective removal of the dyes present in textile effluents. With the objective to evaluate the different adsorptive parameters, as well as determining the efficiency of one alternative adsorbent in the removal of dyes, kinetics and equilibrium data of adsorption were determined. By the kinetic data and of equilibrium, it was verified that the adsorption was favorable for all the dyes in 25ºC, being the best condition for the dye RO16 and RR2 in the total absence of salt. For the dye RR141, the addition of NaCl increased the adsorption capacity of adsorbent in the equilibrium and the addition of Na2SO4 favored the adsorption for the dye RO16, in contrast to what was observed for the two other dyes. The maximum quantity of dye adsorbed per unit mass of adsorbent (q max) in the best adsorptive conditions for the dyes RO16, RR2 and RR141 was of 81.30, 53.48 and 78.74 mg.g-1 respectively.

In this paper, the volume averaging transport equations of two reactive processes in porous media are presented. The porous media are characterized by different length scales and the information describing the mass transfer mechanisms is transferred hierarchically between scales by applying the volume averaging method. This development provides the theoretical definition of effective transport coefficients, which can be predicted through solution of the closure problems. The theoretical calculation of effective diffusion tensors of the species in the particle pores is presented. Two closure problems are deduced through mathematical formulation of two different scales: microporous (process 1) and macroporous (process 2). In order to solve these closure problems, the volume finite method is used as the numerical methodology. Good agreement is verified between the numerical solutions obtained in this study and the data found in the literature for the closure problems considered.

Polymeric materials are increasingly replacing metallic materials as a result of their properties. In this work a composite of phenolic resin and sugar cane pulp was developed. The sugar cane pulp has been previously alkalinised, dried, and milled and the particles had been classified in a range of grain sizes. Experimental assays were performed, varying the proportion of the resin and the reinforcement and the size of the cane pulp fibre, keeping the pressure and moulding temperature constant. These composites were characterised according to physical and chemical properties, through test bodies produced in moulds according to ASTM standards. The experiments performed showed that the use of sugar cane pulp as reinforcement in polymeric composites represents an option for reducing costs in industrial applications, thus suggesting a significant industrial applicability of the product.