A água pode influenciar as propriedades mecânicas das resinas acrílicas. Assim, o efeito do armazenamento em água na resistência ao impacto (RI) de uma resina para base de prótese (Lucitone 550-L) e quatro materiais reembasadores (Tokuyama Rebase II-T; UfiGel Hard-U; Kooliner-K; New Truliner-NT) foi avaliado. Barras da resina L foram confeccionadas (60 x 6 x 2 mm) e reembasadas (2 mm) com T, U, K, NT e L. Amostras não reembasadas de cada material também foram confeccionadas (60 x 6 x 4 mm) para fins comparativos. As amostras foram submetidas aos testes de impacto tipo Charpy sem armazenamento (controle) e após imersão em água por 7, 90 e 180 dias. Os resultados (kJ/m²) analisados por meio de ANOVA dois fatores e teste de Tukey (p=0,05) revelaram que, após 90 dias, U exibiu aumento na RI (0,93) comparado com 7 dias (0,58). K (1,48) e L/K (7,21) exibiram diminuição no período de 7 dias (1,01 e 3,23, respectivamente). NT (0,60) apresentou aumento na RI após 180 dias (1,52), enquanto L/NT (7,70) apresentou redução (3,17). A imersão em água melhorou a RI de U e NT e diminuiu a RI de K, L/K, e L/NT. A água pode afetar de maneira diversa a RI das resinas acrílicas e, consequentemente, a resistência à fratura das bases de próteses reembasadas.
Water may influence the mechanical properties of the acrylic resins. Thus, the effect of water storage on the impact strength (IS) of one denture base (Lucitone 550 - L) and four reline resins (Tokuyama Rebase II - T; UfiGel Hard - U; Kooliner - K; New Truliner - NT) was evaluated. Bars of L were made (60 x 6 x 2 mm) and relined (2 mm) with T, U, K, NT and L. Intact specimens of each material (60 x 6 x 4 mm) were also fabricated for comparative purposes. Specimens were submitted to Charpy impact tests without water storage (control) and after immersion in water for 7, 90 and 180 days. Data (kJ/m²) analyzed by two-way ANOVA and Tukey's test (p=0.05) revealed that after 90 days, U exhibited an increase in the IS (0.93) compared to 7 days (0.58). K (1.48) and L/K (7.21) exhibited a decrease at the 7-day period (1.01 and 3.23, respectively). NT (0.60) showed an increase in the IS after 180 days (1.52), whereas L/NT (7.70) showed a decrease (3.17). Water immersion improved the IS of U and NT, and decreased the IS of K, L/K, and L/NT. Water may affect differently the IS of acrylic resins and, consequently, the resistance to fracture of relined denture bases.