ABSTRACT Introduction: New-onset postoperative atrial fibrillation (POAF) is a common complication following coronary artery bypass grafting (CABG) surgery. Objective: To explore predictive factors and potential mechanisms of new-onset POAF in isolated off-pump CABG patients. Methods: Retrospective observational case-control study of 233 patients undergoing isolated off-pump CABG surgery between August 2018 and July 2020 at the Department of Thoracic and Cardiovascular Surgery, the Affiliated Drum Tower Hospital of Nanjing University Medical School. Associations between predictor variables and new-onset POAF were identified. The main outcome was new-onset POAF after CABG surgery. Results: A total of 75 (32.19%) patients developed new-onset POAF after CABG surgery. The new-onset POAF patients had advanced age, higher baseline systolic blood pressure, more preoperative use of diuretic drug, more transfusion of blood products, atrial dilation and postoperative positive inotropic drug treatment. Nineteen variates entered the multivariable logistic regression model with a Hosmer-Lemeshow test score of 7.565 (P=0.477). Postoperative left atrial enlargement, postoperative drainage in the first 24 hours and total length of hospital stay were statistically significant, while postoperative right atrial enlargement (OR and 95% CI, 7.797 [0.200, 304.294], P=0.272) and left atrial enlargement (3.524 [1.141, 10.886], P=0.029) assessed by echocardiography had the largest OR value. Conclusion: Atrial enlargement is strongly associated with new-onset POAF in patients with isolated off-pump CABG, thus it highlights the advantage of echocardiography as a useful tool for predicting new-onset POAF. Careful monitoring and timely intervention should be considered for these patients.

Abstract Chronic obstructive pulmonary disease (COPD) is the third leading cause of death worldwide. To investigate effect of silymarin on chronic obstructive pulmonary disease (COPD). The serum samples of 20 healthy controls, 20 patients with acute exacerbation of COPD and 20 patients with stable COPD were collected. LPS and smoking were used to induce COPD mouse model. Our results showed that in patients with acute exacerbation of COPD, O2-level release from peripheral blood neutrophils were negatively correlated with forced expiratory volume in the first second (FEV1), FEV1 in predicted value, FEV1/forced vital capacity (FVC), and arterial partial pressure (PaO2). (r=-0.898, -0.878, -874, -0.890, all P<0.01). Compared with that in the control group, the phosphorylation of NADPH oxidase p47phox factor and peripheral blood neutrophil membrane protein in the stable COPD group and the acute exacerbation COPD group were significantly stronger. Silymarin can inhibit the inflammatory response and oxidative stress. In conclusion, silymarin reduces oxidative stress in phagocytic and non-phagocytic cells, thus decreasing the oxidative stress in COPD patients

Abstract There is anisotropy in 30SiMn2MoVA steel gun barrel processed by radial forging which results in the low service life of the gun barrel. While the texture is the main reason for the anisotropy. The crystal plasticity finite element (CPFE) method is usually used to simulate the microstructure and the texture of the metal. In the present work, a two-dimensional polycrystalline finite element model based on electron back-scattered diffraction (EBSD) experiment data is developed to represent virtual grain structures of polycrystalline 30SiMn2MoVA steel. The displacement of nodes in the macro radial forging process finite element model is used as the cross-scale boundary condition in the CPFE model which realizes cross-scale simulation. The texture evolution and inhomogeneous deformation of 30SiMn2MoVA steel in the radial forging processing under three different forging ratios were simulated. The simulated texture results are consistent with the experimental results. The inhomogeneous deformation of grains is obvious and will intensify with the increase of the forging ratio. The distributions of stress and equivalent plastic strain in polycrystals are statistically Gaussian. With the increase of deformation, the further refinement of grains is due to the large shear strain in large grains.

Abstract Character strengths could effectively prevent negative psychological outcomes in adults. However, there was little research conducted among early adolescents. The present study aimed to explore character strengths that were independently related to fewer behavior problems in early adolescents. In total, 521 early adolescents (mean age 10.92 ± 0.04, range 10–12 years) were recruited from primary schools in Sichuan, China. Character strengths were measured using the Values in Action Inventory of Strengths for Youth (VIA-Youth). Behavior problems were measured using the Conners Parent Symptom Questionnaire (PSQ). The results showed that behavior problems were negatively correlated with character strengths ( r = −0.14 to −0.3, p < 0.05 Bonferroni corrected). Character strengths explained a significant proportion of additional variance (14–22%) in five types of behavior problems after controlling the effect of demographic factors (residence, left-behind experiences, maternal education level). Moreover, several specific character strengths showed an independent contribution ( β = −0.34 to −0.14 for self-regulation, perseverance, zest, humility, and leadership; β = 0.21 to 0.34, for hope; all p < 0.05) to behavior problems. Our study revealed that character strengths were protective factors against behavior problems in early adolescents.

Abstract The present research introduces a new configuration of thin-walled nested tube structure as a possible energy absorber subjected to lateral compression. The nested-tube structures were configured in a system comprising of four tubes arranged in different ways. All the nested systems were quasi-statically compressed in the lateral direction on a universal mechanical tester to obtain their energy absorption characteristics. Two modes of deformation, asymmetric mode referred to as “overlap” and symmetric mode referred to as “side-by-side”, were identified in the four-tubes nested systems. The specific energy absorbed by the inverted four-tubes systems was larger than that of the three-tubes nested systems by 20%. The experiments were also modelled using ABAQUSv6.13. Good correlations were obtained for the deformation modes and the corresponding lateral crush force-displacement. The validated model was thereafter used in parametric study to investigate the effectiveness of the nested system under two different boundary conditions; rotation of the specimen by different angles and impact at different angles.

Abstract This work focused on the stress response of anisotropic 30SiMn2MoVA steel gun barrel under coupled thermo-mechanical loads, namely, the contact pressure and friction of projectile, thermal load and pressure of propellant gas. The effect of temperature on the mechanical properties of gun barrel was considered. Two thermal-displacement coupled finite element models (FEM) were built by ABAQUS software. The first was the interaction model of projectile and barrel which was to calculate the stress of barrel engraved by copper jacket and steel jacket projectile. The results of barrel in the interaction model, as an initial condition, were imported to the second FEM which was applied with thermal load and pressure of propellant gas. The results show that the rifling at chamber throat has the largest stress and circumferential stress under coupled loads. It gives a request that the gun barrel should have the better circumferential mechanical properties. The plastic deformation of the rifling at the chamber throat is observed which indicates that 30SiMn2MoVA gun barrel has a low service life due to the poor mechanical properties.

OBJECTIVES: To evaluate the safety and efficacy of a novel bone cement-injectable cannulated pedicle screw augmented with polymethylmethacrylate in osteoporotic spinal surgery. METHODS: This study included 128 patients with osteoporosis (BMD T-score −3.2±1.9; range, −5.4 to -2.5) who underwent spinal decompression and instrumentation with a polymethylmethacrylate-augmented bone cement-injectable cannulated pedicle screw. Postoperative Visual Analogue Scale scores and the Oswestry Disability Index were compared with preoperative values. Postoperative plain radiographs and computed tomography (CT) scans were performed immediately after surgery; at 1, 3, 6, and 12 months; and annually thereafter. RESULTS: The mean follow-up time was 42.4±13.4 months (range, 23 to 71 months). A total of 418 polymethylmethacrylate-augmented bone cement-injectable cannulated pedicle screws were used. Cement extravasations were detected in 27 bone cement-injectable cannulated pedicle screws (6.46%), mainly in cases of vertebral fracture, without any clinical sequela. The postoperative low back and lower limb Visual Analogue Scale scores were significantly reduced compared with the preoperative scores (<0.01), and similar results were noted for the Oswestry Disability Index score (p<0.01). No significant screw migration was noted at the final follow-up relative to immediately after surgery (p<0.01). All cases achieved successful bone fusion, and no case required revision. No infection or blood clots occurred after surgery. CONCLUSIONS: The polymethylmethacrylate-augmented bone cement-injectable cannulated pedicle screw is safe and effective for use in osteoporotic patients who require spinal instrumentation.

The aim of this study was to elucidate the concise effects of a traditional herb pair, Curcumae rhizoma-Sparganii rhizoma (CRSR), on uterine leiomyoma (UL) by analyzing transcriptional profiling. The UL rat model was made by intramuscular injection of progesterone and gavage administration of diethylstilbestrol. From 11 weeks of the establishment of the model, rats of the UL+CRSR group were gavaged daily with CRSR (6.67 g/kg). The serum concentrations of progesterone (P) and estradiol (E2) were determined by radioimmunoassay, the uterine index was measured by caliper measurement, and the pathological status was observed by hematoxylin and eosin stain. Gene expression profiling was checked by NimbleGen Rat Gene Expression Microarrays. The results indicated that the uterine mass of UL+CRSR rats was significantly shrunk and serum P and E2 levels significantly reduced compared to UL animals and nearly to the level of normal rats. Results of microarrays displayed the extensive inhibition of CRSR upon the expression of proliferation and deposition of extracellular matrix (ECM)-related genes, and significantly regulated a wide range of metabolism disorders. Furthermore, CRSR extensively regulated key pathways of the UL process, such as MAPK, PPAR, Notch, and TGF-β/Smad. Regulation of the crucial pathways for the UL process and ECM metabolism may be the underlying mechanisms of CRSR treatment. Further studies will provide clear clues for effectively treating UL with CRSR.

Uterine leiomyomas (ULs) are benign monoclonal tumors that arise from the underlying myometrial tissue in the uterus. Effective therapies are still lacking because of poor understanding of the pathophysiology and epidemiology. Hence, it is urgent to establish efficient animal models to screen novel anti-UL therapies. In this study, for the first time, traditional Chinese medicine and Western medicine were combined to establish an animal model of ULs in rats. In order to evaluate the function and value of the novel model, it was compared with other models. The long-term and short-term rat models for ULs were established using progesterone and diethylstilbestrol. Rats in Qi stagnation and blood stasis group were injected with epinephrine hydrochloride and received chronic unpredictable stress for two weeks. Rats in combining disease with syndrome group (CDWSG) received not only epinephrine hydrochloride injection and chronic unpredictable stress but also progesterone and diethylstilbestrol treatment. We analyzed differences in organ coefficient, uterus size, uterine pathology, concentrations of progesterone, estradiol, progesterone receptor, estrogen receptor, expression of desmin, α-smooth muscle actin, and vimentin among the five groups. The animal model of ULs was successfully constructed by loading the rats with estrogen and progesterone. The rat model of CDWSG was more stable than other groups and the method was the most efficient.

It is increasingly evident that the microenvironment of bone can influence cancer phenotype in many ways that favor growth in bone. CD147, a transmembrane protein of the immunoglobulin (Ig) superfamily, was identified independently in different species and has many designations across different species. However, expression levels of CD147 mRNA in bone cancer have not been described. In this study, we have used real-time fluorescence quantification (RT-PCR) to demonstrate CD147 expression in malignant bone cancer and benign bone tumor tissues. The results suggested that the expression of CD147 gene was significantly up-regulated in malignant bone cancer. Moreover, we found that over-expressed RANKL progressively enhanced osteoclast formation up to 48 h, which suggested that RANKL could promote the formation of osteoclast, indicating that both CD147 and RANKL play important roles in the formation of osteoclasts. Furthermore, the expressions of four osteoclast specific expression genes, including TRACP, MMP-2, MMP-9 and c-Src, were analyzed using RT-PCR. The results indicated that four osteoclast-specific expression genes were detectable in all osteoclast with different treatments. However, the highest expression level of these four osteoclast-specific expression genes appears in the CD147+ RANKL group and the lowest expression level of these four osteoclast-specific expression genes appears with si-RANKL treatment. Characterization of the role of CD147 in the development of tumors should lead to a better understanding of the changes occurring at the molecular level during the development and progression of primary human bone cancer.

Al films and TiO2 films were separately coated on AZ31 magnesium alloy substrates by means of magnetron sputtering method. The surface properties of the samples were explored and compared. Scanning electron microscope (SEM) observed the compact structure characteristics of as-deposited Al films and TiO2 films. After heat treatment under 200ºC for half an hour the films kept the compact structure characteristics and there didn’t exist structural defects on the surface of the films. Nano-indentation measurement results display that the micro-hardness of as-deposited Al film and TiO2 film reaches about 1.90 Gpa and 1.51 Gpa, separately. Al film is a bit harder than TiO2 film. Finally, the corrosion experiments in simulated body fluid initially indicate the different corrosion properties for Al film and TiO2 film. Al film presents more effective anti-corrosion properties than TiO2 film.

OBJECTIVE: The aim of this study was to determine the efficacy of 252Californium neutron intracavitary brachytherapy using a two-channel Y applicator combined with external beam radiotherapy for the treatment of endometrial cancer. METHODS: Thirty-one patients with stage I-III endometrial cancer were recruited for this study. The stage I patients received only 252Californium neutron intracavitary brachytherapy with a two-channel applicator. The stage II and III patients received both 252Californium neutron intracavitary brachytherapy using a two-channel applicator and parallel-opposed whole pelvic radiotherapy. RESULTS: The five-year local control rate was 80.6% (25/31), the overall survival rate was 51.6% (16/31), and the disease-free survival rate was 54.8% (17/31). The incidence of serious late complications was 12.9% (4/31). CONCLUSIONS: 252Californium neutron intracavitary brachytherapy using a two-channel applicator combined with external beam radiotherapy was effective for treating endometrial cancer and the incidence of serious late complications related to this combination was within an acceptable range.

AbstractThis paper aims to set up the ball systematic slipping model and analyze the slipping characteristics caused by different factors for a ball screw operating at high speeds. To investigate the ball screw slipping mechanism, transformed coordinate system should be established firstly. Then it is used to set up mathematical modeling for the ball slipping caused by the three main reasons and the speed of slipping can be calculated. Later, the influence of the contact angle, helix angle and screw diameter for ball screw slipping will be analyzed according to the ball slipping model and slipping speeds equation and the slipping analysis will be obtained. Finally, curve of slipping analysis and that of mechanical efficiency of the ball screw analysis by Lin are compared, which will indirectly verify the correctness of the slipping model. The slipping model and the curve of slipping analysis established in this paper will provide theory basis for reducing slipping and improving the mechanical efficiency of a ball screw operating at high speeds.

OBJECTIVE: The aim of this study was to evaluate the prevalence and spectrum of Nkx2.5 mutations associated with idiopathic atrial fibrillation (AF). METHODS: A cohort of 136 unrelated patients with idiopathic atrial fibrillation and 200 unrelated, ethnically matched healthy controls were enrolled. The coding exons and splice junctions of the Nkx2.5 gene were sequenced in 136 atrial fibrillation patients, and the available relatives of mutation carriers and 200 controls were subsequently genotyped for the identified mutations. The functional characteristics of the mutated Nkx2.5 gene were analyzed using a dual-luciferase reporter assay system. RESULTS: Two novel heterozygous Nkx2.5 mutations (p.N19D and p.F186S) were identified in 2 of the 136 unrelated atrial fibrillation cases, with a mutational prevalence of approximately 1.47%. These missense mutations co-segregated with atrial fibrillation in the families and were absent in the 400 control chromosomes. Notably, 2 mutation carriers also had congenital atrial septal defects and atrioventricular block. Multiple alignments of the Nkx2.5 protein sequences across various species revealed that the altered amino acids were completely conserved evolutionarily. Functional analysis demonstrated that the mutant Nkx2.5 proteins were associated with significantly reduced transcriptional activity compared to their wild-type counterpart. CONCLUSION: These findings associate the Nkx2.5 loss-of-function mutation with atrial fibrillation and atrioventricular block and provide novel insights into the molecular mechanism involved in the pathogenesis of atrial fibrillation. These results also have potential implications for early prophylaxis and allele-specific therapy of this common arrhythmia.

An efficient DNA extraction method was developed for peanut seed, where only 3-5 mg cotyledonary tissue was enough for more than 50 PCR reactions with a reaction volume of 15 μl. Both low copy number and high copy number DNA sequences were successfully amplified. Processing one seed sample only took about half an hour. Sampling had no significant effects on germination and development. The DNA extraction method makes it possible to identify transformants and conduct molecular marker studies prior to sowing, and thus may greatly hasten research progress.