Abstract The damage index is usually applied to evaluate the damage states of bridge structures, which is the basis of structural fragility study. The present study investigates the seismic damage index of the prefabricated segmental bridge columns (PSBC) under cyclic loading by theoretical and numerical analysis. Based on the previous pseudo-static experiments, different damage states characteristics of the monolithic cast-in-place bridge columns (MCBC) and the PSBC are discussed and analyzed to propose the limit-state capacities for each damage state of the PSBC. The limit-state capacities include four parameters: compressive strain of concrete, the tensile strain of steel, the prestress level and the residual displacement. Two finite element models of the PSBC are developed by OpenSees to carry on numerical analysis. Using the numerical results, the damage indexes for the PSBCs are obtained based on the limit-state capacities obtained above. The results indicate that the numerical results show good agreement with the experimental results of the bridge columns. The damage index formula of the PSBC, derived in this study, is reasonable and can be further applied. The maximum error between the proposed damage index and that obtained in the verified case is 20.3%. The proposed method in this paper for developing the damage index of the PSBC can be used in the seismic vulnerability analysis assessment of the bridge structures with prefabricated segmental columns.

Li doped bismuth oxide nanorods have been prepared using sodium bismuthate and Li acetate. X-ray diffraction (XRD) pattern shows that the nanorods are composed of monoclinic Bi2O4 and cubic LiBi12O18.50 phases. Scanning electron microscopy (SEM) observation shows that the nanorods have the length and diameter of 1-5 µm and 50-350 nm, respectively. The formation of the Li doped bismuth oxide nanorods is closely relative to the hydrothermal conditions. The electrochemical performance for the determination of L-cysteine based on a Li doped bismuth oxide nanorods modified glassy carbon electrode (GCE) has been developed. The CV peak current increases obviously and linearly with increasing the scan rate. Under the optimal conditions, Li doped bismuth oxide nanorods modified GCE exhibits good analytical performance with good reproducibility and stability. The linear range of L-cysteine is 0.0001-2 mM and the detection limit is 0.36 µM and 0.17 µM for cvp1 and cvp2, respectively.

Single crystalline Ca2Ge7O16 nanowires have been synthesized using CaO and GeO2 as the raw materials. Various factors that affect the formation and size of the Ca2Ge7O16 nanowires have been analyzed. The obtained products are characterized by X-ray diffraction, transmission electron microscopy and scanning electron microscopy. The results show that the calcium germanate nanowires are composed of orthorhombic Ca2Ge7O16 phase with the length and diameter of several dozens of micrometers and about 50 nm, respectively. Hydrothermal temperature plays an important role on the formation and growth of the Ca2Ge7O16 nanowires. The formation process of the Ca2Ge7O16 nanowires is initially interpreted according to the shape evolution of the products obtained from different growth conditions.