Acessibilidade / Reportar erro

Influence of addition of [2-(methacryloyloxy)ethyl]trimethylammonium chloride to an experimental adhesive

Abstract

The aim of this study was to develop an experimental adhesive with addition of [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC) and to evaluate its mechanical and biological properties and its in vitro antibacterial activity. An experimental adhesive resin was formulated with Bis-GMA, TEGDMA, and HEMA. The antibacterial monomer was added at concentrations of 1%, 2.5%, and 5% (METAC groups). A group without METAC addition was used as control. The experimental adhesives were evaluated as to their antibacterial potential against Streptococcus mutans, degree of conversion, and softening in ethanol for 2 hours. The data were analyzed by one-way ANOVA, Tukey’s post-hoc test, and the paired Student’s t-test (significance level of 0.05). METAC showed antibacterial activity against S. mutans at all concentrations (p < 0.05). There was no statistical difference across METAC groups (p > 0.05). The 1%, 2.5%, and 5% groups yielded the highest mean values for degree of conversion (p < 0.05). The 1% group did not differ from the control group (p > 0.05). There was no statistical difference in baseline microhardness values (p > 0.05) and microhardness values after immersion in ethanol were lower than at baseline for all groups (p < 0.05). There was no statistical difference in the reduction of Knoop hardness number (KHN) after immersion in ethanol for any of the groups (p > 0.05). The results of the present study indicate that METAC is a promising antibacterial agent when added to an adhesive system.

Anti-infective Agents; Adhesives; Dentin-Bonding Agents

Introduction

Streptococcus mutans is linked to biofilm formation and accumulation, associated with dental caries etiology.11. Loesche WJ. Role of Streptococcus mutans in human dental decay. Microbiol Rev. 1986;50(4):353-80. Some studies have shown that secondary caries is one of the primary reasons for restoration failure.22. Mjör IA, Toffenetti F. Secondary caries: a literature review with case reports. Quintessence Int. 2000;31(3):165-79.,33. Ferracane JL. Resin composite: state of the art. Dent Mater. 2011;27(1):29-38. https://doi.org/10.1016/j.dental.2010.10.020
https://doi.org/10.1016/j.dental.2010.10...
Thus, antibacterial agents have been added to adhesive systems as an effective dental treatment strategy.44. Hoshika T, Nishitani Y, Yoshiyama M, Key WO 3rd, Brantley W, Agee KA et al. Effects of quaternary ammonium-methacrylates on the mechanical properties of unfilled resins. Dent Mater. 2014;30(11):1213-23. https://doi.org/10.1016/j.dental.2014.08.365
https://doi.org/10.1016/j.dental.2014.08...
,55. Imazato S, Kinomoto Y, Tarumi H, Torii M, Russell RR, McCabe JF. Incorporation of antibacterial monomer MDPB into dentin primer. J Dent Res. 1997;76(3):768-72. https://doi.org/10.1177/00220345970760030901
https://doi.org/10.1177/0022034597076003...
,66. Imazato S, Tay FR, Kaneshiro AV, Takahashi Y, Ebisu S. An in vivo evaluation of bonding ability of comprehensive antibacterial adhesive system incorporating MDPB. Dent Mater. 2007;23(2):170-6. https://doi.org/10.1016/j.dental.2006.01.005
https://doi.org/10.1016/j.dental.2006.01...
,77. Imazato S. Bio-active restorative materials with antibacterial effects: new dimension of innovation in restorative dentistry. Dent Mater J. 2009;28(1):11-9. https://doi.org/10.4012/dmj.28.11
https://doi.org/10.4012/dmj.28.11...
The use of antibacterial agents leads to inactivation of bacteria and may hamper dental caries progression.88. Imazato S, Kuramoto A, Kaneko T, Ebisu S, Russell RR. Comparison of antibacterial activity of simplified adhesive systems. Am J Dent. 2002;15(6):356-60. Furthermore, the antibacterial property of adhesive systems could bring an additional benefit to the conservative management of carious lesions99. Schwendicke F, Frencken JE, Bjørndal L, Maltz M, Manton DJ, Ricketts D et al. Managing carious lesions: consensus recommendations on carious tissue removal. Adv Dent Res. 2016;28(2):58-67. https://doi.org/10.1177/0022034516639271
https://doi.org/10.1177/0022034516639271...
,1010. Corralo DJ, Maltz M. Clinical and ultrastructural effects of different liners/restorative materials on deep carious dentin: a randomized clinical trial. Caries Res. 2013;47(3):243-50. https://doi.org/10.1159/000345648
https://doi.org/10.1159/000345648...
,1111. Schwendicke F, Dörfer CE, Paris S. Incomplete caries removal: a systematic review and meta-analysis. J Dent Res. 2013;92(4):306-14. https://doi.org/10.1177/0022034513477425
https://doi.org/10.1177/0022034513477425...
by improving the success and longevity of restorations. Notwithstanding, there are not many in vivo studies demonstrating the clinical efficacy of antibacterial adhesives.1212. Cocco AR, Rosa WL, Silva AF, Lund RG, Piva E. A systematic review about antibacterial monomers used in dental adhesive systems: current status and further prospects. Dent Mater. 2015;31(11):1345-62. https://doi.org/10.1016/j.dental.2015.08.155
https://doi.org/10.1016/j.dental.2015.08...

Antibacterial agents can copolymerize or not with the resin matrix, which will determine the release of antibacterial agents.1313. Van Landuyt KL, Snauwaert J, De Munck J, Peumans M, Yoshida Y, Poitevin A et al. Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials. 2007;28(26):3757-85. https://doi.org/10.1016/j.biomaterials.2007.04.044
https://doi.org/10.1016/j.biomaterials.2...
Chlorhexidine, fluoride, and silver particles release antibacterial agents, and since it is impossible to control the kinetics of release, antibacterial activity decreases over time. Monomers with quaternary ammonium salts (QAS) are immobilized in the resin matrix by copolymerization with methacrylates.1414. Leung D, Spratt DA, Pratten J, Gulabivala K, Mordan NJ, Young AM. Chlorhexidine-releasing methacrylate dental composite materials. Biomaterials. 2005;26(34):7145-53. https://doi.org/10.1016/j.biomaterials.2005.05.014
https://doi.org/10.1016/j.biomaterials.2...
QAS are an organic quaternary ammonium compound with nitrogen bound to four radicals.1515. Cheng L, Weir MD, Zhang K, Arola DD, Zhou X, Xu HH. Dental primer and adhesive containing a new antibacterial quaternary ammonium monomer dimethylaminododecyl methacrylate. J Dent. 2013;41(4):345-55. https://doi.org/10.1016/j.jdent.2013.01.004
https://doi.org/10.1016/j.jdent.2013.01....
Thus, the molecular structure of [2-(methacryloyloxy)ethyl]trimethylammoniumchloride (METAC) (Figure 1), which contains a quaternary ammonium group (antimicrobial functionalities), allows copolymerization with other methacrylate monomers and produces antibacterial polymers.1616. Antonucci JM, Zeiger DN, Tang K, Lin-Gibson S, Fowler BO, Lin NJ. Synthesis and characterization of dimethacrylates containing quaternary ammonium functionalities for dental applications. Dent Mater. 2012;28(2):219-28. https://doi.org/10.1016/j.dental.2011.10.004
https://doi.org/10.1016/j.dental.2011.10...
Therefore, METAC-containing materials could be incorporated into adhesive systems to inhibit bacterial activity, leading to long-term efficacy.1717. Stopiglia CD, Collares FM, Ogliari FA, Piva E, Fortes CB, Samuel SM et al. Antimicrobial activity of [2-(methacryloyloxy)ethyl]trimethylammonium chloride against Candida spp. Rev Iberoam Micol. 2012;29(1):20-3. https://doi.org/10.1016/j.riam.2011.03.003
https://doi.org/10.1016/j.riam.2011.03.0...

Figure 1
Chemical structure of [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC).

Considering the short alkyl chain length of METAC, antimicrobial activity probably derives from the charged nitrogen atom of quaternary ammonium, which concentrates the positive charge.1818. Pendleton JN, Gilmore BF. The antimicrobial potential of ionic liquids: a source of chemical diversity for infection and biofilm control. Int J Antimicrob Agents. 2015;46(2):131-9. https://doi.org/10.1016/j.ijantimicag.2015.02.016
https://doi.org/10.1016/j.ijantimicag.20...
QAS, just like METAC, may cause lysis of bacterial membranes. The positively charged sites of quaternary ammonium when in contact with negatively charged bacterial sites may disturb the electrical balance of the cell membrane. The bacteria could then be damaged or killed by cytoplasmic leakage.1919. Namba N, Yoshida Y, Nagaoka N, Takashima S, Matsuura-Yoshimoto K, Maeda H et al. Antibacterial effect of bactericide immobilized in resin matrix. Dent Mater. 2009;25(4):424-30. https://doi.org/10.1016/j.dental.2008.08.012
https://doi.org/10.1016/j.dental.2008.08...
,2020. Beyth N, Yudovin-Farber I, Bahir R, Domb AJ, Weiss EI. Antibacterial activity of dental composites containing quaternary ammonium polyethylenimine nanoparticles against Streptococcus mutans. Biomaterials. 2006;27(21):3995-4002. https://doi.org/10.1016/j.biomaterials.2006.03.003
https://doi.org/10.1016/j.biomaterials.2...
QAS-containing bonding agents act upon the bacteria that are closest to the resin surface layer. This is related to the contact killing mechanism, whose QAS is copolymerized with and immobilized in the resin.2121. Zhou H, Weir MD, Antonucci JM, Schumacher GE, Zhou XD, Xu HH. Evaluation of three-dimensional biofilms on antibacterial bonding agents containing novel quaternary ammonium methacrylates. Int J Oral Sci. 2014;6(2):77-86. https://doi.org/10.1038/ijos.2014.18
https://doi.org/10.1038/ijos.2014.18...
Chlorhexidine, an antibacterial, has shown some ability to help inhibit adherence of microorganisms to a surface, thereby preventing biofilm growth and development.2222. Mohammadi Z, Abbott PV. The properties and applications of chlorhexidine in endodontics. Int Endod J. 2009;42(4):288-302. https://doi.org/10.1111/j.1365-2591.2008.01540.x
https://doi.org/10.1111/j.1365-2591.2008...
However, it is difficult to control the release from the comonomeric mixture, which reduces interface stability.1212. Cocco AR, Rosa WL, Silva AF, Lund RG, Piva E. A systematic review about antibacterial monomers used in dental adhesive systems: current status and further prospects. Dent Mater. 2015;31(11):1345-62. https://doi.org/10.1016/j.dental.2015.08.155
https://doi.org/10.1016/j.dental.2015.08...
Moreover, a previous study showed that growth inhibitory effects against S. mutans from the release of silver ions may cause polymer degradation.2323. Moreira DM, Oei J, Rawls HR, Wagner J, Chu L, Li Y et al. A novel antimicrobial orthodontic band cement with in situ-generated silver nanoparticles. Angle Orthod. 2015;85(2):175-83. https://doi.org/10.2319/022314-127.1
https://doi.org/10.2319/022314-127.1...

The aim of this study was to develop an experimental adhesive by addition of METAC at different concentrations (1%, 2.5%, and 5%) and to evaluate S. mutans inhibition, degree of conversion, microhardness, and softening in ethanol. The null hypothesis is that the addition of METAC does not interfere with adhesive resin properties.

Methodology

Formulation of experimental adhesive resins

Experimental adhesive resins were formulated by mixing 50 wt.% bisphenol A glycidyl methacrylate (Bis-GMA), 25 wt.% triethylene glycol dimethacrylate (TEGDMA), and 25 wt.% 2-hydroxyethyl methacrylate (HEMA). METAC was added at four concentrations: 0, 1, 2.5, and 5 wt%. Camphorquinone, DMAEMA, and diphenyliodonium salt were added as initiator system to the matrix at 1 mol% according to the moles of monomers used. The initiators were mixed with monomers and ultrasonicated for 480 s. A light-emitting diode unit (Radii Cal, SDI LTD., Australia) was used for photoactivation with an irradiation value of 1,200 mW/cm2 measured with a digital power meter (Ophir Optronics, USA). All reagents were purchased from Aldrich Chemical Co. (St. Louis, USA).

Direct contact inhibition

According to a previous study,2424. Centenaro CC, Rostirolla FV, Leitune VC, Parolo CF, Ogliari FA, Samuel SM et al. Influence of addition of 2-[3-(2H-benzotriazol-2-YL)- 4-hydroxyphenyl] ethyl methacrylate to an experimental adhesive system. Acta Odontol Latinoam. 2015;28(1):72-8. https://doi.org/10.1590/S1852-48342015000100010
https://doi.org/10.1590/S1852-4834201500...
three cylindrical samples of adhesive (1 mm in height and 3 mm in diameter) were made for each group. The specimens were sterilized in hydrogen peroxide plasma. The gram-positive S. mutans (OMZ175) was grown aerobically in brain heart infusion (BHI) broth (HiMedia Laboratories Pvt. Ltd, Mumbai, India) at 37ºC. Cells were harvested by centrifugation and resuspended in a fresh medium. Inocula were prepared by adjusting the cell suspension to a predetermined optical density (OD) of 0.02 at 600 nm. Using a 96-well plate, each specimen was placed in a well with 300 µL of BHI broth. Each well was inoculated with 20 µL of the S. mutans suspension. The negative control consisted of three sets of wells containing uninoculated fresh medium (300 µL). Immediately and 24 hours after the placement of the inocula, 90 µL of each well content was diluted in saline to 10-8. The 10-1, 10-3, 10-6, and 10-8 dilutions were plated onto BHI agar using 25-µL aliquots of each dilution in duplicate. The plates were incubated at 37ºC under anaerobic conditions. The colonies were counted visually after 24 hours and scaled by dilution factors and then transformed into colony-forming units (CFUs) per milliliter. The experiment was performed under aseptic conditions.

Degree of conversion

The experimental adhesive was evaluated using Fourier transform infrared spectroscopy (FTIR) with a Vetrex 70 (Bruker Optics, Ettlingen, Germany) spectrometer equipped with an attenuated total reflectance device composed of a horizontal diamond crystal with a mirror angle of 45 degrees. The spectrometer received a support for the light-curing unit and the 5-mm distance between the fiber tip and the sample was standardized. The Opus software (Bruker Optics, Ettlingen, Germany) used a Blackman-Harris 3-Term apodization function in a range of 4000 to 400 cm-1 and 64 scans with a 4cm-1 resolution. The samples were directly dispensed onto the diamond crystal into a polyvinyl siloxane matrix for standardization (5 mm in diameter and 1 mm in height). One spectrum was obtained before photoactivation and another one immediately after photoactivation for 20 s (n = 3). The degree of conversion (DC) was calculated according to a previous study,2525. Shelke S, Mhaske G, Gadakh S, Gill C. Green synthesis and biological evaluation of some novel azoles as antimicrobial agents. Bioorg Med Chem Lett. 2010;20(24):7200-4. https://doi.org/10.1016/j.bmcl.2010.10.111
https://doi.org/10.1016/j.bmcl.2010.10.1...
considering the intensity of 1,635 cm-1 carbon-carbon double-bond stretching vibration (peak height) and using the 1,608 cm-1 aromatic carbon-carbon bond from polymerized and unpolymerized samples as internal standard.

Softening in ethanol

The same specimens produced during the evaluation of degree of conversion were used to determine solvent degradation. Three specimens for each experimental adhesive (n = 3) were embedded in acrylic resin and polished. Thereafter, they were stored and dried at 37ºC for 24 hours. The specimens were subjected to a microhardness test in which five indentations (10 g/5 s), 100 µm apart from each other, were assessed using a digital microhardness tester (HMV 2, Shimadzu, Tokyo, Japan). Microhardness was calculated according to a previous study.2626. Leitune VC, Collares FM, Trommer RM, Andrioli DG, Bergmann CP, Samuel SM. The addition of nanostructured hydroxyapatite to an experimental adhesive resin. J Dent. 2013;41(4):321-7. https://doi.org/10.1016/j.jdent.2013.01.001
https://doi.org/10.1016/j.jdent.2013.01....
The initial Knoop microhardness number (KHN1) was recorded, the specimens were subjected to softening in absolute ethanol at 37 ºC for 2 hours, and the final post-conditioning hardness (KHN2) was then determined. The percent reduction between KHN1 and KHN2 (ΔKHN%) was calculated.

Statistical analysis

The number of CFUs and degree of conversion were analyzed by one-way ANOVA and Tukey’s post-hoc test. Softening in ethanol was assessed by the paired Student’s t-test (KHN1 and KHN2) and ΔKHN% by one-way ANOVA. A level of significance of 0.05 was considered for all tests.

Results

The direct contact inhibition (DCI) values are shown in Figure 2. Addition of METAC reduced the number of CFUs compared with the negative control and experimental adhesive without METAC (p < 0.05). There was no statistical difference across METAC groups (p>0.05). The mean DCI values ranged from 72.6 to 74.5%. The 2.5% and 5% groups yielded the highest mean DCI values (p < 0.05). The 1% group did not differ from the control group (p > 0.05). Table shows microhardness values before (KHN1) and after (KHN2) immersion in ethanol, the percent reduction between KHN1 and KHN2 (ΔKHN%), and the degree of conversion. There was no statistical difference in initial microhardness values and difference in percent values between KHN1 and KHN2 for any of the groups (p > 0.05). Microhardness values after immersion in ethanol were lower than the initial ones for all groups (p < 0.05).

Figure 2
Figure 2. Median and 25th and 75th percentiles in CFU (log). Different uppercase letters indicate significant differences (p < 0.05).

Table
Microhardness values before (KHN1) and after immersion in solvent (KHN2) and the variation of microhardness values (Δ%). Mean (+- standard deviation) degree of conversion (DC).

Discussion

Antibacterial adhesives have been introduced to allow the reduction of biofilm accumulation at the tooth/restoration interface and could provide long-term antibacterial activity.1212. Cocco AR, Rosa WL, Silva AF, Lund RG, Piva E. A systematic review about antibacterial monomers used in dental adhesive systems: current status and further prospects. Dent Mater. 2015;31(11):1345-62. https://doi.org/10.1016/j.dental.2015.08.155
https://doi.org/10.1016/j.dental.2015.08...
In the present study, an experimental METAC-containing adhesive resin was used at three concentrations. All adhesives with this compound presented antibacterial activity against S. mutans and resistance to solvent degradation did not differ from that of the control group. Degree of conversion improved from 2.5 wt% with the addition of the antibacterial monomer. Thus, the null hypothesis had to be rejected.

A compound with a methacrylate functional group that copolymerizes with the comonomer mixture of the adhesive, preventing leakage and improving antibacterial activity over time, is required.2121. Zhou H, Weir MD, Antonucci JM, Schumacher GE, Zhou XD, Xu HH. Evaluation of three-dimensional biofilms on antibacterial bonding agents containing novel quaternary ammonium methacrylates. Int J Oral Sci. 2014;6(2):77-86. https://doi.org/10.1038/ijos.2014.18
https://doi.org/10.1038/ijos.2014.18...
,2727. Imazato S, Russell RR, McCabe JF. Antibacterial activity of MDPB polymer incorporated in dental resin. J Dent. 1995;23(3):177-81. https://doi.org/10.1016/0300-5712(95)93576-N
https://doi.org/10.1016/0300-5712(95)935...
In this study, all groups showed antibacterial activity against S. mutans at different METAC concentrations compared to the negative control. METAC, when incorporated into an adhesive system, has the significant potential to inhibit biofilm formation, in addition to intrinsic anti-adhesive and detergent properties against gram-positive bacteria.2828. Imazato S, Ebi N, Takahashi Y, Kaneko T, Ebisu S, Russell RR. Antibacterial activity of bactericide-immobilized filler for resin-based restoratives. Biomaterials. 2003;24(20):3605-9. https://doi.org/10.1016/S0142-9612(03)00217-5
https://doi.org/10.1016/S0142-9612(03)00...
The antibacterial mechanism is probably due to contact of the negatively charged bacterial sites and positively charged QAS, diffusion through the cell wall, binding to the cytoplasmic membrane, and/or disruption of the cytoplasmic membrane, release of cytoplasmic constituents, and cell death.2929. Xu X, Wang Y, Liao S, Wen ZT, Fan Y. Synthesis and characterization of antibacterial dental monomers and composites. J Biomed Mater Res B Appl Biomater. 2012;100(4):1151-62. https://doi.org/10.1002/jbm.b.32683
https://doi.org/10.1002/jbm.b.32683...
,3030. Guiqian Lu DW, Fu R. Studies on the synthesis and antibacterial activities of polymeric quaternary ammonium salts from dimethylaminoethyl methacrylate. React Funct Polym. 2007;67(3):355-66. http://dx.doi.org/10.1016/j.reactfunctpolym.2007.01.008
http://dx.doi.org/10.1016/j.reactfunctpo...
,3131. He J, Söderling E, Österblad M, Vallittu PK, Lassila LV. Synthesis of methacrylate monomers with antibacterial effects against S. mutans. Molecules. 2011;16(11):9755-63. https://doi.org/10.3390/molecules16119755
https://doi.org/10.3390/molecules1611975...
METAC showed better results at lower concentrations than other antibacterial copolymers (e.g., benzotriazole), which achieved antibacterial effect only at 5 wt%.2424. Centenaro CC, Rostirolla FV, Leitune VC, Parolo CF, Ogliari FA, Samuel SM et al. Influence of addition of 2-[3-(2H-benzotriazol-2-YL)- 4-hydroxyphenyl] ethyl methacrylate to an experimental adhesive system. Acta Odontol Latinoam. 2015;28(1):72-8. https://doi.org/10.1590/S1852-48342015000100010
https://doi.org/10.1590/S1852-4834201500...
In this study, the in vitro antibacterial effect was not tested after a long period. Nevertheless, it was previously shown that copolymerization is responsible for growth inhibition of bacteria in contact with the adhesive for 6 months after polymerization using another antibacterial monomer [methacryloxylethyl cetyl dimethyl ammonium chloride (DMAE-CB)].3232. Xiao YH, Ma S, Chen JH, Chai ZG, Li F, Wang YJ. Antibacterial activity and bonding ability of an adhesive incorporating an antibacterial monomer DMAE-CB. J Biomed Mater Res B Appl Biomater. 2009;90(2):813-7. https://doi.org/10.1002/jbm.b.31350
https://doi.org/10.1002/jbm.b.31350...
Thus, METAC is expected to have this behavior over time. However, it is imperative to evaluate antibacterial effect on other cariogenic microorganisms (e.g., lactobacilli).1212. Cocco AR, Rosa WL, Silva AF, Lund RG, Piva E. A systematic review about antibacterial monomers used in dental adhesive systems: current status and further prospects. Dent Mater. 2015;31(11):1345-62. https://doi.org/10.1016/j.dental.2015.08.155
https://doi.org/10.1016/j.dental.2015.08...

The number of unreacted monomers increases as the degree of conversion decreases, enhancing the chances of damage to the pulp and periapical tissues.2121. Zhou H, Weir MD, Antonucci JM, Schumacher GE, Zhou XD, Xu HH. Evaluation of three-dimensional biofilms on antibacterial bonding agents containing novel quaternary ammonium methacrylates. Int J Oral Sci. 2014;6(2):77-86. https://doi.org/10.1038/ijos.2014.18
https://doi.org/10.1038/ijos.2014.18...
Incorporation of METAC was found to be advantageous, since the degree of polymer conversion increased for the experimental adhesive resin at the 2.5% and 5% concentrations. These findings indicate that incorporation of METAC had no adverse influence on the curing behavior of Bis-GMA/TEGDMA/HEMA-based adhesive resin. Although there is a statistically significant difference in the degree of conversion, its values corroborate those of the literature,44. Hoshika T, Nishitani Y, Yoshiyama M, Key WO 3rd, Brantley W, Agee KA et al. Effects of quaternary ammonium-methacrylates on the mechanical properties of unfilled resins. Dent Mater. 2014;30(11):1213-23. https://doi.org/10.1016/j.dental.2014.08.365
https://doi.org/10.1016/j.dental.2014.08...
but it is not possible to state they will be clinically significant. METAC is a monomethacrylate1616. Antonucci JM, Zeiger DN, Tang K, Lin-Gibson S, Fowler BO, Lin NJ. Synthesis and characterization of dimethacrylates containing quaternary ammonium functionalities for dental applications. Dent Mater. 2012;28(2):219-28. https://doi.org/10.1016/j.dental.2011.10.004
https://doi.org/10.1016/j.dental.2011.10...
and there may have been fewer unreacted double bonds after the reaction, not indicating reduced polymerization, though. The degree of conversion is directly associated with the mechanical properties of polymers; however, it is not necessarily related to crosslink density.3333. Rodrigues SB, Collares FM, Leitune VC, Schneider LF, Ogliari FA, Petzhold CL et al. Influence of hydroxyethyl acrylamide addition to dental adhesive resin. Dent Mater. 2015;31(12):1579-86. https://doi.org/10.1016/j.dental.2015.10.005
https://doi.org/10.1016/j.dental.2015.10...
Regarding long-term durability, it was reported that QAS containing reactive methacrylate groups can be copolymerized and covalently bonded to the resin matrix upon photopolymerization.44. Hoshika T, Nishitani Y, Yoshiyama M, Key WO 3rd, Brantley W, Agee KA et al. Effects of quaternary ammonium-methacrylates on the mechanical properties of unfilled resins. Dent Mater. 2014;30(11):1213-23. https://doi.org/10.1016/j.dental.2014.08.365
https://doi.org/10.1016/j.dental.2014.08...
This copolymerization immobilizes the antibacterial agent, preventing its leakage, which could result in material with poor physical and chemical properties.1212. Cocco AR, Rosa WL, Silva AF, Lund RG, Piva E. A systematic review about antibacterial monomers used in dental adhesive systems: current status and further prospects. Dent Mater. 2015;31(11):1345-62. https://doi.org/10.1016/j.dental.2015.08.155
https://doi.org/10.1016/j.dental.2015.08...

The softening test is an alternative method for crosslink density evaluation.3434. Schneider LF, Moraes RR, Cavalcante LM, Sinhoreti MA, Correr-Sobrinho L, Consani S. Cross-link density evaluation through softening tests: effect of ethanol concentration. Dent Mater. 2008;24(2):199-203. https://doi.org/10.1016/j.dental.2007.03.010
https://doi.org/10.1016/j.dental.2007.03...
It is usually accepted that highly cross-linked polymers are more resistant to degradation and solvent uptake whereas linear polymers present more space and pathways for solvent molecules to diffuse within their structure.3535. Ferracane JL. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater. 2006;22(3):211-22. https://doi.org/10.1016/j.dental.2005.05.005
https://doi.org/10.1016/j.dental.2005.05...
The incorporation of METAC did not influence the initial microhardness values, as KHN1 was not different across the groups. The microhardness values observed in all experimental groups were not different from those of the control group after 2 hours of immersion in ethanol. METAC has one carbon-carbon double bond (Figure 1) whereas Bis-GMA and TEGDMA have two. This could result reduce crosslink density.3636. Pfeifer CS, Shelton ZR, Braga RR, Windmoller D, Machado JC, Stansbury JW. Characterization of dimethacrylate polymeric networks: a study of the crosslinked structure formed by monomers used in dental composites. Eur Polym J. 2011;47(2):162-70. https://doi.org/10.1016/j.eurpolymj.2010.11.007
https://doi.org/10.1016/j.eurpolymj.2010...
However, as softening in ethanol is assumed to reflect the crosslink density of a polymer,3737. Benetti AR, Peutzfeldt A, Asmussen E, Pallesen U, Franco EB. Influence of curing rate on softening in ethanol, degree of conversion, and wear of resin composite. Am J Dent. 2011;24(2):115-8. METAC is a reliable alternative.

It is necessary to determine whether the addition of QAS to comonomer mixtures has some effect on their mechanical properties and does not compromise dentin bond strength.44. Hoshika T, Nishitani Y, Yoshiyama M, Key WO 3rd, Brantley W, Agee KA et al. Effects of quaternary ammonium-methacrylates on the mechanical properties of unfilled resins. Dent Mater. 2014;30(11):1213-23. https://doi.org/10.1016/j.dental.2014.08.365
https://doi.org/10.1016/j.dental.2014.08...
,55. Imazato S, Kinomoto Y, Tarumi H, Torii M, Russell RR, McCabe JF. Incorporation of antibacterial monomer MDPB into dentin primer. J Dent Res. 1997;76(3):768-72. https://doi.org/10.1177/00220345970760030901
https://doi.org/10.1177/0022034597076003...
,66. Imazato S, Tay FR, Kaneshiro AV, Takahashi Y, Ebisu S. An in vivo evaluation of bonding ability of comprehensive antibacterial adhesive system incorporating MDPB. Dent Mater. 2007;23(2):170-6. https://doi.org/10.1016/j.dental.2006.01.005
https://doi.org/10.1016/j.dental.2006.01...
,77. Imazato S. Bio-active restorative materials with antibacterial effects: new dimension of innovation in restorative dentistry. Dent Mater J. 2009;28(1):11-9. https://doi.org/10.4012/dmj.28.11
https://doi.org/10.4012/dmj.28.11...
The results of the present study indicate that METAC is a promising antibacterial agent when added to an adhesive system.

Conclusion

METAC copolymerized with adhesive resin exhibited antibacterial properties against S. mutans, proving to be beneficial to long-term restorations.

References

  • 1
    Loesche WJ. Role of Streptococcus mutans in human dental decay. Microbiol Rev. 1986;50(4):353-80.
  • 2
    Mjör IA, Toffenetti F. Secondary caries: a literature review with case reports. Quintessence Int. 2000;31(3):165-79.
  • 3
    Ferracane JL. Resin composite: state of the art. Dent Mater. 2011;27(1):29-38. https://doi.org/10.1016/j.dental.2010.10.020
    » https://doi.org/10.1016/j.dental.2010.10.020
  • 4
    Hoshika T, Nishitani Y, Yoshiyama M, Key WO 3rd, Brantley W, Agee KA et al. Effects of quaternary ammonium-methacrylates on the mechanical properties of unfilled resins. Dent Mater. 2014;30(11):1213-23. https://doi.org/10.1016/j.dental.2014.08.365
    » https://doi.org/10.1016/j.dental.2014.08.365
  • 5
    Imazato S, Kinomoto Y, Tarumi H, Torii M, Russell RR, McCabe JF. Incorporation of antibacterial monomer MDPB into dentin primer. J Dent Res. 1997;76(3):768-72. https://doi.org/10.1177/00220345970760030901
    » https://doi.org/10.1177/00220345970760030901
  • 6
    Imazato S, Tay FR, Kaneshiro AV, Takahashi Y, Ebisu S. An in vivo evaluation of bonding ability of comprehensive antibacterial adhesive system incorporating MDPB. Dent Mater. 2007;23(2):170-6. https://doi.org/10.1016/j.dental.2006.01.005
    » https://doi.org/10.1016/j.dental.2006.01.005
  • 7
    Imazato S. Bio-active restorative materials with antibacterial effects: new dimension of innovation in restorative dentistry. Dent Mater J. 2009;28(1):11-9. https://doi.org/10.4012/dmj.28.11
    » https://doi.org/10.4012/dmj.28.11
  • 8
    Imazato S, Kuramoto A, Kaneko T, Ebisu S, Russell RR. Comparison of antibacterial activity of simplified adhesive systems. Am J Dent. 2002;15(6):356-60.
  • 9
    Schwendicke F, Frencken JE, Bjørndal L, Maltz M, Manton DJ, Ricketts D et al. Managing carious lesions: consensus recommendations on carious tissue removal. Adv Dent Res. 2016;28(2):58-67. https://doi.org/10.1177/0022034516639271
    » https://doi.org/10.1177/0022034516639271
  • 10
    Corralo DJ, Maltz M. Clinical and ultrastructural effects of different liners/restorative materials on deep carious dentin: a randomized clinical trial. Caries Res. 2013;47(3):243-50. https://doi.org/10.1159/000345648
    » https://doi.org/10.1159/000345648
  • 11
    Schwendicke F, Dörfer CE, Paris S. Incomplete caries removal: a systematic review and meta-analysis. J Dent Res. 2013;92(4):306-14. https://doi.org/10.1177/0022034513477425
    » https://doi.org/10.1177/0022034513477425
  • 12
    Cocco AR, Rosa WL, Silva AF, Lund RG, Piva E. A systematic review about antibacterial monomers used in dental adhesive systems: current status and further prospects. Dent Mater. 2015;31(11):1345-62. https://doi.org/10.1016/j.dental.2015.08.155
    » https://doi.org/10.1016/j.dental.2015.08.155
  • 13
    Van Landuyt KL, Snauwaert J, De Munck J, Peumans M, Yoshida Y, Poitevin A et al. Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials. 2007;28(26):3757-85. https://doi.org/10.1016/j.biomaterials.2007.04.044
    » https://doi.org/10.1016/j.biomaterials.2007.04.044
  • 14
    Leung D, Spratt DA, Pratten J, Gulabivala K, Mordan NJ, Young AM. Chlorhexidine-releasing methacrylate dental composite materials. Biomaterials. 2005;26(34):7145-53. https://doi.org/10.1016/j.biomaterials.2005.05.014
    » https://doi.org/10.1016/j.biomaterials.2005.05.014
  • 15
    Cheng L, Weir MD, Zhang K, Arola DD, Zhou X, Xu HH. Dental primer and adhesive containing a new antibacterial quaternary ammonium monomer dimethylaminododecyl methacrylate. J Dent. 2013;41(4):345-55. https://doi.org/10.1016/j.jdent.2013.01.004
    » https://doi.org/10.1016/j.jdent.2013.01.004
  • 16
    Antonucci JM, Zeiger DN, Tang K, Lin-Gibson S, Fowler BO, Lin NJ. Synthesis and characterization of dimethacrylates containing quaternary ammonium functionalities for dental applications. Dent Mater. 2012;28(2):219-28. https://doi.org/10.1016/j.dental.2011.10.004
    » https://doi.org/10.1016/j.dental.2011.10.004
  • 17
    Stopiglia CD, Collares FM, Ogliari FA, Piva E, Fortes CB, Samuel SM et al. Antimicrobial activity of [2-(methacryloyloxy)ethyl]trimethylammonium chloride against Candida spp. Rev Iberoam Micol. 2012;29(1):20-3. https://doi.org/10.1016/j.riam.2011.03.003
    » https://doi.org/10.1016/j.riam.2011.03.003
  • 18
    Pendleton JN, Gilmore BF. The antimicrobial potential of ionic liquids: a source of chemical diversity for infection and biofilm control. Int J Antimicrob Agents. 2015;46(2):131-9. https://doi.org/10.1016/j.ijantimicag.2015.02.016
    » https://doi.org/10.1016/j.ijantimicag.2015.02.016
  • 19
    Namba N, Yoshida Y, Nagaoka N, Takashima S, Matsuura-Yoshimoto K, Maeda H et al. Antibacterial effect of bactericide immobilized in resin matrix. Dent Mater. 2009;25(4):424-30. https://doi.org/10.1016/j.dental.2008.08.012
    » https://doi.org/10.1016/j.dental.2008.08.012
  • 20
    Beyth N, Yudovin-Farber I, Bahir R, Domb AJ, Weiss EI. Antibacterial activity of dental composites containing quaternary ammonium polyethylenimine nanoparticles against Streptococcus mutans. Biomaterials. 2006;27(21):3995-4002. https://doi.org/10.1016/j.biomaterials.2006.03.003
    » https://doi.org/10.1016/j.biomaterials.2006.03.003
  • 21
    Zhou H, Weir MD, Antonucci JM, Schumacher GE, Zhou XD, Xu HH. Evaluation of three-dimensional biofilms on antibacterial bonding agents containing novel quaternary ammonium methacrylates. Int J Oral Sci. 2014;6(2):77-86. https://doi.org/10.1038/ijos.2014.18
    » https://doi.org/10.1038/ijos.2014.18
  • 22
    Mohammadi Z, Abbott PV. The properties and applications of chlorhexidine in endodontics. Int Endod J. 2009;42(4):288-302. https://doi.org/10.1111/j.1365-2591.2008.01540.x
    » https://doi.org/10.1111/j.1365-2591.2008.01540.x
  • 23
    Moreira DM, Oei J, Rawls HR, Wagner J, Chu L, Li Y et al. A novel antimicrobial orthodontic band cement with in situ-generated silver nanoparticles. Angle Orthod. 2015;85(2):175-83. https://doi.org/10.2319/022314-127.1
    » https://doi.org/10.2319/022314-127.1
  • 24
    Centenaro CC, Rostirolla FV, Leitune VC, Parolo CF, Ogliari FA, Samuel SM et al. Influence of addition of 2-[3-(2H-benzotriazol-2-YL)- 4-hydroxyphenyl] ethyl methacrylate to an experimental adhesive system. Acta Odontol Latinoam. 2015;28(1):72-8. https://doi.org/10.1590/S1852-48342015000100010
    » https://doi.org/10.1590/S1852-48342015000100010
  • 25
    Shelke S, Mhaske G, Gadakh S, Gill C. Green synthesis and biological evaluation of some novel azoles as antimicrobial agents. Bioorg Med Chem Lett. 2010;20(24):7200-4. https://doi.org/10.1016/j.bmcl.2010.10.111
    » https://doi.org/10.1016/j.bmcl.2010.10.111
  • 26
    Leitune VC, Collares FM, Trommer RM, Andrioli DG, Bergmann CP, Samuel SM. The addition of nanostructured hydroxyapatite to an experimental adhesive resin. J Dent. 2013;41(4):321-7. https://doi.org/10.1016/j.jdent.2013.01.001
    » https://doi.org/10.1016/j.jdent.2013.01.001
  • 27
    Imazato S, Russell RR, McCabe JF. Antibacterial activity of MDPB polymer incorporated in dental resin. J Dent. 1995;23(3):177-81. https://doi.org/10.1016/0300-5712(95)93576-N
    » https://doi.org/10.1016/0300-5712(95)93576-N
  • 28
    Imazato S, Ebi N, Takahashi Y, Kaneko T, Ebisu S, Russell RR. Antibacterial activity of bactericide-immobilized filler for resin-based restoratives. Biomaterials. 2003;24(20):3605-9. https://doi.org/10.1016/S0142-9612(03)00217-5
    » https://doi.org/10.1016/S0142-9612(03)00217-5
  • 29
    Xu X, Wang Y, Liao S, Wen ZT, Fan Y. Synthesis and characterization of antibacterial dental monomers and composites. J Biomed Mater Res B Appl Biomater. 2012;100(4):1151-62. https://doi.org/10.1002/jbm.b.32683
    » https://doi.org/10.1002/jbm.b.32683
  • 30
    Guiqian Lu DW, Fu R. Studies on the synthesis and antibacterial activities of polymeric quaternary ammonium salts from dimethylaminoethyl methacrylate. React Funct Polym. 2007;67(3):355-66. http://dx.doi.org/10.1016/j.reactfunctpolym.2007.01.008
    » http://dx.doi.org/10.1016/j.reactfunctpolym.2007.01.008
  • 31
    He J, Söderling E, Österblad M, Vallittu PK, Lassila LV. Synthesis of methacrylate monomers with antibacterial effects against S. mutans. Molecules. 2011;16(11):9755-63. https://doi.org/10.3390/molecules16119755
    » https://doi.org/10.3390/molecules16119755
  • 32
    Xiao YH, Ma S, Chen JH, Chai ZG, Li F, Wang YJ. Antibacterial activity and bonding ability of an adhesive incorporating an antibacterial monomer DMAE-CB. J Biomed Mater Res B Appl Biomater. 2009;90(2):813-7. https://doi.org/10.1002/jbm.b.31350
    » https://doi.org/10.1002/jbm.b.31350
  • 33
    Rodrigues SB, Collares FM, Leitune VC, Schneider LF, Ogliari FA, Petzhold CL et al. Influence of hydroxyethyl acrylamide addition to dental adhesive resin. Dent Mater. 2015;31(12):1579-86. https://doi.org/10.1016/j.dental.2015.10.005
    » https://doi.org/10.1016/j.dental.2015.10.005
  • 34
    Schneider LF, Moraes RR, Cavalcante LM, Sinhoreti MA, Correr-Sobrinho L, Consani S. Cross-link density evaluation through softening tests: effect of ethanol concentration. Dent Mater. 2008;24(2):199-203. https://doi.org/10.1016/j.dental.2007.03.010
    » https://doi.org/10.1016/j.dental.2007.03.010
  • 35
    Ferracane JL. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater. 2006;22(3):211-22. https://doi.org/10.1016/j.dental.2005.05.005
    » https://doi.org/10.1016/j.dental.2005.05.005
  • 36
    Pfeifer CS, Shelton ZR, Braga RR, Windmoller D, Machado JC, Stansbury JW. Characterization of dimethacrylate polymeric networks: a study of the crosslinked structure formed by monomers used in dental composites. Eur Polym J. 2011;47(2):162-70. https://doi.org/10.1016/j.eurpolymj.2010.11.007
    » https://doi.org/10.1016/j.eurpolymj.2010.11.007
  • 37
    Benetti AR, Peutzfeldt A, Asmussen E, Pallesen U, Franco EB. Influence of curing rate on softening in ethanol, degree of conversion, and wear of resin composite. Am J Dent. 2011;24(2):115-8.

Publication Dates

  • Publication in this collection
    2017

History

  • Received
    29 Sept 2016
  • Accepted
    06 Mar 2017
  • Reviewed
    23 Mar 2016
Sociedade Brasileira de Pesquisa Odontológica - SBPqO Av. Prof. Lineu Prestes, 2227, 05508-000 São Paulo SP - Brazil, Tel. (55 11) 3044-2393/(55 11) 9-7557-1244 - São Paulo - SP - Brazil
E-mail: office.bor@ingroup.srv.br