Acessibilidade / Reportar erro

3D technology to measure dental arches and create a template for lingual brackets technique

ABSTRACT

Objective:

This study aims at identifying anatomical dimensions of dental arches, based on landmarks currently used in the lingual orthodontic technique, and create an archwire form template to be used in orthodontic clinics.

Methods:

Maxillary and mandibular dental casts of 140 Caucasian individuals with natural and normal occlusion were digitized (3D), and the images were analyzed with Delcam Power ShapeTM 2010 software. The dental arch shapes and sizes were obtained from 14 landmarks selected on the lingual surface of the teeth. Points and segments defined by the software were used to create an archwire form template.

Results:

Various dental arch patterns were found for both maxilla and mandible. The smallest sizes were found in females, and the largest were found in male subjects. Six categories were defined for each gender, three for the maxilla and three for the mandible (Small, Medium and Large). A template was created with eighteen anatomic lingual archwire designs, nine for the maxilla and nine for the mandible, for both genders.

Conclusions:

Landmarks evaluated in this study showed dental arch differences between genders. This information enables making orthodontic lingual archwires that are more compatible with the anatomical forms and sizes of the maxilla and mandible. The findings also allowed the creation of a template for an anatomic lingual metallic archwire form to be used in the lingual technique.

Keywords:
Dental arch; Anatomy; Orthodontics

RESUMO

Objetivo:

O presente estudo tem como objetivo encontrar as formas anatômicas e dimensões das arcadas dentárias com base em pontos de referência utilizados na técnica ortodôntica lingual, e criar um diagrama com um maior número de arcos metálicos para serem utilizados na clínica ortodôntica.

Métodos:

140 modelos de indivíduos caucasianos com oclusão normal e natural foram digitalizados (3D) e as imagens, analisadas com o software Delcam Power ShapeTM 2010. A determinação das formas e tamanhos das arcadas dentárias foi obtida a partir de 14 pontos selecionados na superfície lingual dos dentes. Outros pontos e segmentos foram utilizados, com o auxílio do software, para definir um diagrama.

Resultados:

Foram encontrados diferentes tamanhos de arcadas dentárias linguais, tanto para a maxila quanto para a mandíbula. Os menores tamanhos foram os femininos, e os maiores, os masculinos. Definiram-se seis tamanhos para cada sexo, sendo três para a maxila e três para a mandíbula, nomeados como P, M e G. Foi criado um diagrama com dezoito desenhos de arcos linguais anatômicos, nove para a maxila e nove para a mandíbula, para ambos os sexos.

Conclusões:

A posição dos pontos de referência nesse estudo evidenciou diferenças entre os sexos, o que permitiu a criação de arcos mais compatíveis com as formas e dimensões anatômicas da maxila e mandíbula. A diferença entre os tamanhos das arcadas dentárias linguais possibilitou a criação de um diagrama com formas de arcos metálicos linguais anatômicos para serem utilizados na técnica lingual, para auxiliar o profissional a criar os seus próprios arcos.

Palavras-chave:
Arcada dentária; Anatomia; Ortodontia

INTRODUCTION

In the late 1970s, lingual orthodontics was introduced as a result of conventional appliances bonding to the lingual surfaces of the teeth.11 Alexander CM, Alexander RG, Gorman JC, Hilgers JJ, Kurz C, Scholz RP et al. Lingual orthodontics: a status report part 1. J Clin Orthod. 1982;16(4):255-62.,22 Kurz C, Swarz ML, Andreiko C. Lingual orthodontics: a status report: part 2: research and development. J Clin Orthod. 1982;16(7):735-40. The first scientific work describing brackets and the mushroom-shape of the lingual archwire was published in 1979.33 Fujita K. New orthodontic treatment with lingual bracket and mushroom archwire appliance. Am J Orthod. 1979;76(6):657-75.

Striking differences between the lingual and buccal techniques are observed,44 Segner D. Some biomechanical considerations in treatment with the lingual technique. Lingual News. 2007;5(1). such as the archwire form used.55 Monini AC, Gandini Jr LG, Gandini MREAS, Figueiredo JFB. Biomechanical differences between lingual and labial orthodontics. Rev Dent Press Ortod Ortop Facial. 2008;13(1):92-100. However, few studies66 Echarri P, Baca A. Ortodoncia lingual. Determinación de la forma del arco. Rev Ibero-am Ortodo. 1998;17(1):1-8.

7 Tseng YC, Chang HP. A study of the dental arch form in lingual orthodontics. J Taiwan Assoc Orthod. 1998;10(2):3-14.

8 Creekmore T. Lingual orthodontics: its renaissance. Am J Orthod Dentofacial Orthop. 1989;96(12):120-37.
-99 Fillion D. The resurgence of lingual orthodontics. Clinical Impression. 1998;7(1):2-9. have been published attempting to determine the dental arch form in the lingual technique.

Many authors have used cusp tips to outline the archwire forms,1010 Burris BG, Harris EF. Maxillary arch size and shape in american blacks and whites. Angle Orthod. 2000;70(4):297-302.,1111 Taner TU, Ciger S, El H, Germeç D, Es A. Evaluation of dental arch width and form changes after orthodontic treatment and retention with a new computerized method. Am J Orthod Dentofacial Orthop. 2004;126(4):464-75.,1212 Kook YA, Nojima K, Moon HB, McLaughlin RP, Sinclair PM. Comparison of arch forms between Korean and North American white populations. Am J Orthod Dentofacial Orthop. 2004;126(6):680-6. while others used the medial landmarks of the crowns from a buccal perspective on the anterior and posterior teeth as references,1313 Triviño T, Siqueira DF, Scanavini MA. A new concept of mandibular dental arch forms with normal occlusion. Am J Orthod Dentofacial Orthop. 2008;133(1):10-22. as well as lingual and occlusal landmarks, or in the long axial axis of the teeth.77 Tseng YC, Chang HP. A study of the dental arch form in lingual orthodontics. J Taiwan Assoc Orthod. 1998;10(2):3-14. Moreover, others researchers1414 Lombardo L, Saba L, Scuzzo G, Takemoto K, Oteo L, Palma JC, et al. A new concept of anatomic lingual arch form. Am J Orthod Dentofacial Orthop. 2010; 138(3):260.e1-e13.,1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22. used landmarks on the lingual surfaces closer to the gingival third because this site showed the smallest difference between the lingual surfaces of canines and premolars.1616 Scuzzo G, Takemoto K, Takemoto Y, Takemoto A, Lombardo L. A new lingual Straight-Wire technique. J Clin Orthod. 2010;44(2):114-23.

Despite the fact that there are several ways to define dental arch forms, in the lingual technique, the inter-canine distances vary substantially,1616 Scuzzo G, Takemoto K, Takemoto Y, Takemoto A, Lombardo L. A new lingual Straight-Wire technique. J Clin Orthod. 2010;44(2):114-23. making it difficult to determine how many sizes of mushroom-shaped lingual archwires might exist.33 Fujita K. New orthodontic treatment with lingual bracket and mushroom archwire appliance. Am J Orthod. 1979;76(6):657-75. Therefore, some authors developed the straight-wire concept in lingual orthodontics, seeking to streamline the work of the professional.1616 Scuzzo G, Takemoto K, Takemoto Y, Takemoto A, Lombardo L. A new lingual Straight-Wire technique. J Clin Orthod. 2010;44(2):114-23.,1717 Takemoto K, Scuzzo G. The straight-wire concept in lingual orthodontics. J Clin Orthod. 2001;35(1):46-52. They also proposed1818 Kyung HM, Park HS, Sung JH, Bae SM, Kim IB. The lingual plain-wire system with micro-implant ancorage. J Clin Orthod. 2004;38(7):388-95. that brackets should be bonded with auxiliary blades in order to enable the use of archwires without curvatures, whereas other authors1414 Lombardo L, Saba L, Scuzzo G, Takemoto K, Oteo L, Palma JC, et al. A new concept of anatomic lingual arch form. Am J Orthod Dentofacial Orthop. 2010; 138(3):260.e1-e13.,1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22. devised a more square-shaped archwire, allowing use of a lingual straight archwire.

A previous study analyzing the shapes and dimensions of dental arches in digital 3D models for the use in lingual straight-wire technique showed that more cervical archwire setting promotes smaller inter-bracket distance.1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22.

Although this strategy allowed reduction of the typical insets and offsets of the dental arch lingual surfaces, it hampers orthodontic mechanics in certain movements1919 Lombardo L, Carlucci A, Palone M, Mollica F, Siciliani G. Stiffness comparison of mushroom and straight SS and TMA lingual archwires. Prog Orthod. 2016; 17(1):27.,2020 Owen B, Gullion G, Heo G, Carey JP, Major PW, Romanyk DL. Measurement of forces and moments around the maxillary arch for treatment of a simulated lingual incisor and high canine malocclusion using straight and mushroom archwires in fixed lingual appliances. Eur J Orthod. 2017;39(6):665-72. and may cause gingival inflammation.2121 Long H, Zhou Y, Pyakurel U, Liao L, Jian F, Xue J, et al. Comparison of adverse effects between lingual and labial orthodontic treatment. Angle Orthod. 2013 Nov;83(6):1066-73. Furthermore, a specific assembly with resin pads is required to compensate the distance between the lingual surface and the base of the bracket.44 Segner D. Some biomechanical considerations in treatment with the lingual technique. Lingual News. 2007;5(1).,55 Monini AC, Gandini Jr LG, Gandini MREAS, Figueiredo JFB. Biomechanical differences between lingual and labial orthodontics. Rev Dent Press Ortod Ortop Facial. 2008;13(1):92-100. In areas where compensations are made, the brackets advance more into the space occupied by the tongue, resulting in patient discomfort.2121 Long H, Zhou Y, Pyakurel U, Liao L, Jian F, Xue J, et al. Comparison of adverse effects between lingual and labial orthodontic treatment. Angle Orthod. 2013 Nov;83(6):1066-73. Furthermore, low bracket profile enables less invasion to the lingual space, therefore providing better adaptation for the patient in terms of speech and comfort.2222 Stamm T, Hohoff A, Ehmer U. A subjective comparison of two lingual bracket systems. Eur J Orthod. 2005;27(4):420-6.

In this context, the present study evaluated the dental arch shapes and sizes that are formed when the brackets are placed farther from the cervical margin of the teeth,1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22. in region that keep the concave and convex form in the lingual surface, but more distant from the cervical area, to avoid gingival inflammation.

The forms and sizes of archwires for the lingual technique were also defined, and a template was created. It is believed that there is a difference in dental arch forms between genders. Orthodontists should benefit from different sizes and shapes of archwires to perform treatments, and not be limited to a number of prefabricated archwires that are usually dictated by wire and bracket manufacturers. Using the template, the professional may choose the appropriate archwire form.

MATERIAL AND METHODS

This study is an analytical observational research of patient records from Faculty of Health, UMESP, São Bernardo do Campo, SP, Brazil. The protocol of this study was approved by the Ethics Committee from, Federal University of São Paulo - UNIFESP, number 0388/2016.

The sample included maxillary and mandibular dental casts of 70 Caucasian Brazilian individuals (28 men and 42 women), minimum 15.0 years old and maximum of 21.3 years old (average 16.4 ±1.3 years old).

Sample inclusion criteria were defined as follows: cast models from individuals with normal occlusion and no odontogenic abnormalities; complete full dentition, except for third molars; and all permanent teeth in occlusion according to the following keys for occlusion of Andrews :2323 Andrews LF. The six keys to normal occlusion. Am J Orthod. 1972;62(3):296-309. Angle Class I molar relationship, angulation and inclination of the crowns (considering the long axis of the teeth) and the flat curve of spee.2323 Andrews LF. The six keys to normal occlusion. Am J Orthod. 1972;62(3):296-309. Rotations of up to 3 degrees and diastema up to 0.5 mm were accepted.

Sample exclusion criteria were: odontogenic abnormalities, incomplete dental eruption, and presence of erupted third molars.

Seventy pairs of cast models were digitized with a 3D Dental Wings™ scanner (model DW5-140, Montreal, Quebec, Canada). Images were analyzed by Delcam Power SHAPE™ software (2010, Birmingham, UK).

To standardize the position of the models and to avoid measurement distortions, landmarks were set on the canine’s incisal and on the first molar’s mesiobuccal cusp,1010 Burris BG, Harris EF. Maxillary arch size and shape in american blacks and whites. Angle Orthod. 2000;70(4):297-302. creating a trapezoid form and a grid of coordinates in the X, Y, and Z axes, allowing the rotation of the models in several positions, without changing the proportion of the measures executed during the study.1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22.

DETERMINING THE LANDMARKS AND DEFINING THE SHAPE AND SIZE OF THE ARCH

Lingual surface landmarks were determined with the Delcam Power SHAPE 2010 software program. The landmarks chosen represented the location where the brackets would be placed on the lingual surface of each tooth, and where the archwires would pass inside the bracket slot.

The location of the points was defined as follows: In the maxillary and mandibular anterior teeth, the reference point was located at the intersection of the line passing through the long axis of the tooth in the vertical plane and the line passing through the center of the clinical crown of the horizontal axis (the deepest point of the concavity of palatal surface). In the maxillary and mandibular premolars, the reference point was also located at the intersection of the line passing through the long axis of the tooth in the vertical plane and the line passing through the middle third of the lingual surface (the most prominent convex point of the lingual surface). In the first and second upper and lower molars, the reference point was located in the intersection of the line that passes the long axis of the mesio-lingual cusp in the vertical plane and the line passing through the middle third of the lingual surface (most prominent point of the lingual surface of these teeth).

The model was rotated on the computer screen in a way that the lingual surfaces could be seen with a frontal view and the operator could define and locate where the marked landmarks should be placed.

By means of the X, Y, and Z coordinates, two planes were established. The X and Y axes established the horizontal plane, whereas the Y and Z axes established the vertical plane, corresponding to the median sagittal plane that passes between the central incisors and divides the model into two halves, left and right (Fig 1).

Figure 1:
Digitalized model, with the X, Y, and Z coordinates.

The fourteen united landmarks defined the curvature and shape of the dental lingual archwire11 using Delcam Power SHAPE™ 2010 tools (Fig 2).

Figure 2:
Image obtained from Delcam Power SHAPE™ 2010 software model, with points determined on the lingual surface and arch shape formed with measurements obtained from each key-point related to the coordinates (X, Y, and Z).

The previously chosen points were plotted in the XY plane, such that the Z axis was reset, and it was possible to obtain the XY coordinates of each landmark (Fig 2).

For determining fourteen measurements (ten horizontal and four vertical),1010 Burris BG, Harris EF. Maxillary arch size and shape in american blacks and whites. Angle Orthod. 2000;70(4):297-302.,1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22. Delcam Power SHAPE™ 2010 program was used as well.

The horizontal measurements corresponded to the distances between the landmarks chosen in the molars, premolars and canines in relation to the Y axis; and the vertical measurements, to the central and lateral incisors in relation to the X axis (Fig 2).

The program provided linear measurements, in millimeters, of the coordinates of the points in relation to the work plane, indicating a satisfactory degree of accuracy (Fig 2).

DETERMINING ARCHWIRE TEMPLATE

For the construction of the archwire template, the Delcam Power SHAPE™ 2010 program was used in the previously digitized models. Points were created on the cusp tips of the canines and first left and right premolars, and then points on the cusp tips of the second premolars and left and right first molars, and these points were united two-by-two, forming small straight line segments. Previously defined points were also used on the lingual surface of the 3D model of the first and second left and right molars, and the first and second left and right premolars, which were joined two-by-two, respectively, forming small straight line segments (Fig 3).

Figure 3:
Eight straight wire segments defined by the landmarks and cuspid tips.

Perpendicular segments were drawn to the straight line segments previously created, and then the model was removed from the computer screen. An extension of all the lines was made until they crossed each other. The initial 3D model was reinserted, and perpendicular line extensions were found to pass through the interdental embrasure ridge of the respective teeth in question. That was also done in the mandibular model, and the measurements obtained were all flattened in the Z axis, so that a flat archwire could be constructed, because the models were in a three-dimensional space. At this stage, a curve (red line in Fig 4) was created from the point of the left canine to the point of the right canine, passing through a point between the central incisors, as the anterior limit of the curvature.

Figure 4:
Lines and curves to define the archwire shapes for the template.

The program has a tool in the form of scissors that allowed for all the extensions to be cut, thereby obtaining the final designs of the maxillary and mandibular archwires of each of the models (Fig 5). The templates with eighteen archwires, nine maxillary and nine mandibular, were built from the coordinates (X and Y) of the eleven points, which defined the design of the metallic archwires mentioned in Figure 5.

Figure 5:
Maxillary and mandibular dental arches obtained by the Delcam Power SHAPE™ 2010 software.

Percentiles 5, 15, 25, 40, 50 (medium), 60, 75, 85 and 95 were taken from the coordinates (X and Y) measurements of each point, and then the mean between both sides was symmetrical.

These data can be observed in Tables 1 and 2, and the illustration is represented by Figures 6 and 7.

Table 1:
Coordinates measurements of each point, to set up the template of the mandibular metallic archwire.

Table 2:
Coordinates measurements of each point, to set up the template of the maxillary metallic archwire.

Figure 6:
Illustration of the archwires’ points and the percentiles of the mandible.

Figure 7:
Illustration of the archwires’ points and the percentiles of the maxilla.

After completing all these steps, 0.5 mm was deducted to compensate for the base of the lingual bracket, and the final result with the template of anatomical lingual archwires can be seen in Figure 8.

Figure 8:
Template with eighteen anatomic lingual archwires.

DATA ANALYSIS AND RESULTS

In the distribution of the models analyzed in the sample, 40% were from male and 60%, from female patients. The Shapiro-Wilk test showed that the data had a normal distribution and that all measurements passed the criterion of normality. Student’s t-test was used to compare differences between the genders and to define the measurements. As seven measurements were made in each arch, to maintain the global significance level at 0.05, Bonferroni correction (0.05/7) was used, so the difference was considered statistically significant when p< 0.007.

Method error was performed after 30 days, and we repeated setting the landmarks in 30% of the sample. The Intraclass Coefficient Correlation (ICC) showed that the measurements varied from 0.98 to 1.00, and the Bland-Altman plot showed that the largest mean variation was 0.08 mm (-0.06 to 0.23), which occurred in the measurement of the second left molars.

Table 3 shows the comparison between the means of vertical and horizontal linear measurements between the genders. In the maxilla, we observed differences between the genders in molars, premolars and canines, whereas in the mandible, differences were observed only in the measurements of the molars and premolars.

Table 3:
Comparison between the male and female genders (mm)

To define the measures of the average arch, the mean was used: the 25th percentile (P25%) was used for the small arch and the 75th percentile (P75%) was used for the large arch for both males (Table 4) and females (Table 5).

Table 4:
Measurements for the male gender (mm).

Table 5:
Measurements for the female gender (mm).

Figures 9 and 10 illustrate the shapes and sizes of the arches of the two genders, for the mandible and maxilla, respectively, from the values of Tables 4 and 5. P25% values were considered small size (S), P75% values were considered large size (L), and means were used to define medium size (M). The determination of S, M and L was done separately for each gender, with pink representing the female gender and blue representing the male gender, showing twelve sizes of dental arches, six for the maxilla and six for the mandible.

Figure 9:
Shape and sizes of mandibular dental arches for both genders.

Figure 10:
Shapes and sizes of maxillary dental arches for both genders.

Figure 8 illustrates the template with the design of eighteen archwires, with nine maxillary and nine mandibular lingual archwires.

DISCUSSION

This study aimed at identifying the shapes and sizes of lingual dental arches from digitized models, as well as the probable difference between genders, from the point of view of the lingual orthodontic technique. It was found that there was a difference between the lingual sizes of the maxillary and mandibular arches, which allowed to define six sizes of lingual dental arches for the maxilla and six for mandible. Three of those for females and three for males, described as S, M and L.

Another purpose was to create arch templates to assist orthodontists in bending archwires themselves and not to depend on prefabricated archwires that might not meet their needs in daily practice. It was possible to create a template composed of eighteen archwire sizes, nine for the maxilla and nine for the mandible.

3D images digitized from cast models were used, in agreement with other authors,1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22.,2424 Ferrario VF, Sforza C, Poggio CE, Serrao G, Colombo A. Three-dimensional dental arch curvature in human adolescents and adults. Am J Orthod Dentofacial Orthop. 1999;115(4):401-5.

25 Paranhos LR, Andrews WA, Jóias RP, Bérzin F, Daruge Jr E, Triviño T. Dental arch morphology in normal occlusions. Braz J Oral Sci. 2011;9(4):475-80.

26 Oda S, Arai K, Nakahara R. Commercially available archwire forms compared with normal dental arch forms in a Japanese population. Am J Orthod Dentofacial Orthop. 2010;137(4):520-7.

27 Ferrario VF, Sforza C, Dellavia C, Colombo A, Ferrari RP. Three-dimensional hard tissue palatal size and shape: A 10-year longitudinal evaluation in healthy adults. Int J Adult Orthodon Orthognath Surg. 2002;17(1):51-8.

28 Camporesi M, Franchi L, Baccetti T, Antonini A. Thin-plate spline analysis of arch form in a Southern European population with na ideal natural occlusion. Eur J Orthod. 2006; 28(2):134-40.
-2929 Park KH, Bayome M, Park JH, Lee JW, Baek SH, Kook YA. New classification of lingual arch form in normal occlusion using three dimensional virtual models. Korean J Orthod. 2015;45(2):74-81. because they allow simultaneous visualization in three dimensions (horizontal, sagittal and vertical). 3D technology is currently used in several areas of Dentistry,30,31 allowing professionals to develop studies using the same sample. Since it can be inserted in any computer compatible with the program that was used, it is maintained over time and does not occupy a physical space, in addition to the great accuracy given by the software that is needed when using several pieces of numerical data.

One of the limitations of this study was the average age of 16.4 years, because the cast models available for digitization came from a sample of individuals aged 15 to 21.3 years old. However, this average age allows consideration of individuals without growth, since the dental arch has greater growth from 12 to 15 years old, showing a small reduction in width and depth between the ages of 15 and 26 years in both arches.3232 DeKock WH. Dental arch depth and width studied longitudinally from 12 years of age to adulthood. Am J Orthod. 1972;62(1):56-66.

To guarantee that the measurements remained proportional, regardless of the position of the digital models, the X, Y and Z axes were used in this study, as well as some previous studies,1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22.,2424 Ferrario VF, Sforza C, Poggio CE, Serrao G, Colombo A. Three-dimensional dental arch curvature in human adolescents and adults. Am J Orthod Dentofacial Orthop. 1999;115(4):401-5. allowing the reference points to be positioned in the three dimensions. However, some other studies1313 Triviño T, Siqueira DF, Scanavini MA. A new concept of mandibular dental arch forms with normal occlusion. Am J Orthod Dentofacial Orthop. 2008;133(1):10-22.,1414 Lombardo L, Saba L, Scuzzo G, Takemoto K, Oteo L, Palma JC, et al. A new concept of anatomic lingual arch form. Am J Orthod Dentofacial Orthop. 2010; 138(3):260.e1-e13. used only two (X and Y) coordinates, not allowing the models to be moved due to the lack of a third axis, since the Z axis does not exist in 2D models.

Fourteen points were chosen on the lingual surfaces because they would represent the place where the brackets would be placed on the lingual surfaces of the teeth, and where the orthodontic wires or metallic archwires pass into the slot of these brackets. The height chosen for these points took into consideration the most concave and convex parts of the lingual surfaces, to represent the anatomical shape of the dental arches as much as possible. From these points, the measurements were obtained to define the shapes and sizes of the arches.

To accomplish this, several authors1313 Triviño T, Siqueira DF, Scanavini MA. A new concept of mandibular dental arch forms with normal occlusion. Am J Orthod Dentofacial Orthop. 2008;133(1):10-22.,1414 Lombardo L, Saba L, Scuzzo G, Takemoto K, Oteo L, Palma JC, et al. A new concept of anatomic lingual arch form. Am J Orthod Dentofacial Orthop. 2010; 138(3):260.e1-e13.,2727 Ferrario VF, Sforza C, Dellavia C, Colombo A, Ferrari RP. Three-dimensional hard tissue palatal size and shape: A 10-year longitudinal evaluation in healthy adults. Int J Adult Orthodon Orthognath Surg. 2002;17(1):51-8.,3333 Pepe SH. Polynominal and catenary curve fits to human dental arches. J Dent Res. 1975;54(6):1124-32. used polynomial functions; others chose linear measurements.1212 Kook YA, Nojima K, Moon HB, McLaughlin RP, Sinclair PM. Comparison of arch forms between Korean and North American white populations. Am J Orthod Dentofacial Orthop. 2004;126(6):680-6.,1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22. In this study, fourteen linear measurements (ten horizontal and four vertical) were used to define the shapes and sizes of the dental arches, similar to an earlier study,1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22. while others used four linear measurements1212 Kook YA, Nojima K, Moon HB, McLaughlin RP, Sinclair PM. Comparison of arch forms between Korean and North American white populations. Am J Orthod Dentofacial Orthop. 2004;126(6):680-6. (two horizontal and two vertical). Few studies combined the two forms together, that is, polynomial functions and linear measurements: ten linear measurements (five horizontal and five vertical),77 Tseng YC, Chang HP. A study of the dental arch form in lingual orthodontics. J Taiwan Assoc Orthod. 1998;10(2):3-14. six horizontal linear measurements,1010 Burris BG, Harris EF. Maxillary arch size and shape in american blacks and whites. Angle Orthod. 2000;70(4):297-302. and six linear measurements (three horizontal and three vertical).3434 Raberin M, Laumon B, Martin JL, Brunner F. Dimensions and form of dental arches in subjects with normal occlusions. Am J Orthod. 1993;104(1):67-72.

The linear measurements of this study were automatically defined by Delcam Power SHAPE™ 2010 software and therefore they were obtained with great precision. With this method, using methodology similar to an earlier study,1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22. we noticed a difference between the measurements when points were used more at the center of the clinical crown than when these points were positioned more in the cervical region of the clinical crown. Therefore, as shown in Table 4, the male measurements of the vertical distances of the mandibular central incisors (CI, 5.3 mm), mandibular lateral incisors (LI, 3.7 mm) and horizontal distances of mandibular canines (C, 23.7 mm) were different from those of a previous study1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22. (4.7 mm for CI, 3.3 mm for LI and 22.7 mm for C). The measurements of the distances for the maxillary central incisors (CI, 8.5 mm) and maxillary canines (C, 31.3 mm) were also different when compared with the previous report (7.5 mm for CI and 29.2 mm for C).

The same was observed with the results obtained from female samples, as shown in Table 5. It was shown that the measurements of the vertical distances of the mandibular central incisors (CI, 5.1 mm), mandibular lateral incisors (LI, 3.6 mm) and horizontal distances of the mandibular canines (C, 23.2 mm) were different from those of the previous study1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22. (4.6 mm for CI, 3.1 mm for LI, and 22.1 mm for C), The measurements of the distances for the maxillary central incisors (CI, 8.4 mm) and maxillary canines (C 29.9 mm) were also different when compared with the previous report (7.3 mm for CI and 27.9 mm for C). The differences that were found in the distance measurements are important because they change the final shape of the dental arches.

The accuracy of the digital technique was confirmed by the usage of the Shapiro-Wilk test on the measurements obtained. And as all data passed the normality criterion, even though the sample pool was composed by 40% male and 60% female models, it was possible to apply Student’s t test and Bonferroni test on the measures found, allowing the creation of two tables (Tables 4 and 5), showing the measures of the female and male casts separately.

Some studies13,14,27,28,35 were not able to identify differences between the genders. It is anthropologically known that the sizes of the male dental arches are larger than those of females,2424 Ferrario VF, Sforza C, Poggio CE, Serrao G, Colombo A. Three-dimensional dental arch curvature in human adolescents and adults. Am J Orthod Dentofacial Orthop. 1999;115(4):401-5. although in this study there were females with broader arches and males with narrow arches. This can be explained by the choice of reference points and the number of measurements applied.1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22.

From the measurements obtained, three sizes of dental arches were identified: S, M, and L. In another study,1414 Lombardo L, Saba L, Scuzzo G, Takemoto K, Oteo L, Palma JC, et al. A new concept of anatomic lingual arch form. Am J Orthod Dentofacial Orthop. 2010; 138(3):260.e1-e13. median measurements were applied, unlike the averages found in this study and those of other authors.1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22. In this way, the mean, and not the median, was used to obtain the final measurements, because mean measurements were more accurate than the medians.

In the mandible, the shape of the dental arch resembles a parabola, with a more rounded form in the anterior portion, and the posterior side is more like a straight line, with a slight deviation in the region of the premolars and molars. In the maxilla, the shape of the dental arch also resembles a parabola, with the rounded anterior portion with more pronounced curves in the canine region, and a segment of a line, with deviations, in the region of the premolars and molars (Figs 9 and 10). In other studies,1414 Lombardo L, Saba L, Scuzzo G, Takemoto K, Oteo L, Palma JC, et al. A new concept of anatomic lingual arch form. Am J Orthod Dentofacial Orthop. 2010; 138(3):260.e1-e13.,1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22. the parabola was flatter, with less prominent curve in the anterior region, mainly due to the location of the points that were selected. In our study, those points were placed more occlusally, to allow a better adaptation to the anatomical form of the dental arch, compared to previous studies in which the placement of the points was more cervical.

As stated in a previous study,3636 Chuck GC. Ideal arch form. Angle Orthod. 1934;4(4):312-27. to perform orthodontic treatment orthodontist should have an understanding about the shape of the dental arch. It has been observed for years that many professionals sought to find a method to reliably copy the shape of the dental arch and apply it for orthodontic treatment.

For this purpose, the first diagram in orthodontics was created by the millimeter paper method.3737 Bonwill WGA. The scientific articulation of the human teeth as founded on geometrical, mathematical and mechanical laws. Items Interest, 1885;21(9):617-43. Over the years, other diagrams have emerged,3838 Boone G N. Archwires designed for individual patients. Angle Orthod, 1963;33(3);178-85.

39 Lundstrom A. Some asymmetries of the dental arches, jaws and skull, and their etiological significance. Am J Orthod. 1961;47(2);81-106.

40 Interlandi S. New method for establishing arch form. J Clin Orthod. 1978;12(12);843-5.
-4141 Capelozza Filho L, Capelozza JAZ. OAID: Objective Anatomic Individual Diagram. A proposal for choosing the form of the arches in the Straight-wire technique, based on both the anatomic individuality and the aims of the treatment. Rev Clín Ortod Dental Press. 2004;3(5):84-92. with the intention of preserving stability and individualizing treatment, allowing coordination of archwires to facilitate the professional’s work. Some are more accurate and use their own initial model as a reference;3636 Chuck GC. Ideal arch form. Angle Orthod. 1934;4(4):312-27.,3838 Boone G N. Archwires designed for individual patients. Angle Orthod, 1963;33(3);178-85. others look for diagrams with the possibility of several sizes of archwires,40,41 which is possible in regard to making metal archwires.

Some studies42,43 have shown that professionals have a concern regarding maintenance of the dental arch shape. Perhaps because the prefabricated archwires mostly do not correspond to the size and shape of the arches in a normal occlusion.2626 Oda S, Arai K, Nakahara R. Commercially available archwire forms compared with normal dental arch forms in a Japanese population. Am J Orthod Dentofacial Orthop. 2010;137(4):520-7. Nevertheless, it should be noted that prefabricated light alloy archwires (mainly nickel and titanium) cannot substantially alter the shape of the dental arch;2525 Paranhos LR, Andrews WA, Jóias RP, Bérzin F, Daruge Jr E, Triviño T. Dental arch morphology in normal occlusions. Braz J Oral Sci. 2011;9(4):475-80. however, they assist in the initial stages of treatment and are necessary for current orthodontics.2626 Oda S, Arai K, Nakahara R. Commercially available archwire forms compared with normal dental arch forms in a Japanese population. Am J Orthod Dentofacial Orthop. 2010;137(4):520-7.

In lingual orthodontics, diagrams were proposed from photocopied models,66 Echarri P, Baca A. Ortodoncia lingual. Determinación de la forma del arco. Rev Ibero-am Ortodo. 1998;17(1):1-8. and others through computerized programs,99 Fillion D. The resurgence of lingual orthodontics. Clinical Impression. 1998;7(1):2-9.,1414 Lombardo L, Saba L, Scuzzo G, Takemoto K, Oteo L, Palma JC, et al. A new concept of anatomic lingual arch form. Am J Orthod Dentofacial Orthop. 2010; 138(3):260.e1-e13.,1515 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22.,4444 Wiechmann D, Wong RWK, Hagg U. Incognito: the novel CAD/CAM Lingual Orthodontic appliance. Dental Asia. 2008. to allow the manufacture of individualized orthodontic archwires, because in lingual orthodontics the coordination of the archwires is a difficult or almost impossible task.

Therefore, considering that dental human arches are asymmetrical and that this characteristic is more a rule than an exception,4545 Gottlieb EL. A Farewell to symmetry. J Clin Orthod. 1993;27(7):357-8. the construction of symmetrical archwires results in smaller errors than if the asymmetries are obeyed,3939 Lundstrom A. Some asymmetries of the dental arches, jaws and skull, and their etiological significance. Am J Orthod. 1961;47(2);81-106. and the measures resulting from this work are adequate to define the shapes of anatomical arches. It is possible to determine a diagram to obtain lingual archwires that could help lingual orthodontics in the definition of prefabricated archwires.

There is controversy regarding the various types of archwires used in the lingual technique. Some authors1414 Lombardo L, Saba L, Scuzzo G, Takemoto K, Oteo L, Palma JC, et al. A new concept of anatomic lingual arch form. Am J Orthod Dentofacial Orthop. 2010; 138(3):260.e1-e13.

15 Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22.

16 Scuzzo G, Takemoto K, Takemoto Y, Takemoto A, Lombardo L. A new lingual Straight-Wire technique. J Clin Orthod. 2010;44(2):114-23.

17 Takemoto K, Scuzzo G. The straight-wire concept in lingual orthodontics. J Clin Orthod. 2001;35(1):46-52.
-1818 Kyung HM, Park HS, Sung JH, Bae SM, Kim IB. The lingual plain-wire system with micro-implant ancorage. J Clin Orthod. 2004;38(7):388-95. suggest using straight archwire as a facilitator of the technique, even aware of the need for making bends for finishing and detailing. A group of authors11 Alexander CM, Alexander RG, Gorman JC, Hilgers JJ, Kurz C, Scholz RP et al. Lingual orthodontics: a status report part 1. J Clin Orthod. 1982;16(4):255-62.,22 Kurz C, Swarz ML, Andreiko C. Lingual orthodontics: a status report: part 2: research and development. J Clin Orthod. 1982;16(7):735-40.,33 Fujita K. New orthodontic treatment with lingual bracket and mushroom archwire appliance. Am J Orthod. 1979;76(6):657-75. have advocated the lingual technique using mushroom archwires, and others66 Echarri P, Baca A. Ortodoncia lingual. Determinación de la forma del arco. Rev Ibero-am Ortodo. 1998;17(1):1-8. advocated metallic archwires to be used in the lingual technique resembling a Christmas tree-shaped archwire.

It is known that there are differences between one archwire type and another, and it is important to remember that in clinical practice, the mechanical aspect must also be considered. Therefore, authors who compared in vitro the two types of mushroom and straight archwire observed that the advantages and disadvantages of some orthodontic movements varied for each archwire according to the treatment phase.1919 Lombardo L, Carlucci A, Palone M, Mollica F, Siciliani G. Stiffness comparison of mushroom and straight SS and TMA lingual archwires. Prog Orthod. 2016; 17(1):27.,2020 Owen B, Gullion G, Heo G, Carey JP, Major PW, Romanyk DL. Measurement of forces and moments around the maxillary arch for treatment of a simulated lingual incisor and high canine malocclusion using straight and mushroom archwires in fixed lingual appliances. Eur J Orthod. 2017;39(6):665-72.

We believe that more studies on archwire shape should be performed (in vitro and in vivo) because it is still not possible to state which archwire shapes -mushroom, straight wire, Christmas tree or anatomical (the forms found in this study)- will be more suitable for treatment with the lingual technique. Therefore, the professional will have the opportunity to choose the shape of the archwire that better suits according to the clinical case being treated and, if possible, a template to assist in the orthodontic treatment.

CONCLUSION

In this study, we were able to define twelve sizes of lingual dental arches by altering the reference points: six sizes for the maxilla, with three for females (S, M, L) and three for males (S, M, L); and six sizes for the mandible, with three for females (S, M, L) and three for males (S, M, L).

It was also possible to create an anatomical template representative of anatomical arch shapes, allowing construction of lingual metallic archwires to be used in the lingual technique that are more compatible with the reality of the anatomy of the dental arches.

REFERENCES

  • 1
    Alexander CM, Alexander RG, Gorman JC, Hilgers JJ, Kurz C, Scholz RP et al. Lingual orthodontics: a status report part 1. J Clin Orthod. 1982;16(4):255-62.
  • 2
    Kurz C, Swarz ML, Andreiko C. Lingual orthodontics: a status report: part 2: research and development. J Clin Orthod. 1982;16(7):735-40.
  • 3
    Fujita K. New orthodontic treatment with lingual bracket and mushroom archwire appliance. Am J Orthod. 1979;76(6):657-75.
  • 4
    Segner D. Some biomechanical considerations in treatment with the lingual technique. Lingual News. 2007;5(1).
  • 5
    Monini AC, Gandini Jr LG, Gandini MREAS, Figueiredo JFB. Biomechanical differences between lingual and labial orthodontics. Rev Dent Press Ortod Ortop Facial. 2008;13(1):92-100.
  • 6
    Echarri P, Baca A. Ortodoncia lingual. Determinación de la forma del arco. Rev Ibero-am Ortodo. 1998;17(1):1-8.
  • 7
    Tseng YC, Chang HP. A study of the dental arch form in lingual orthodontics. J Taiwan Assoc Orthod. 1998;10(2):3-14.
  • 8
    Creekmore T. Lingual orthodontics: its renaissance. Am J Orthod Dentofacial Orthop. 1989;96(12):120-37.
  • 9
    Fillion D. The resurgence of lingual orthodontics. Clinical Impression. 1998;7(1):2-9.
  • 10
    Burris BG, Harris EF. Maxillary arch size and shape in american blacks and whites. Angle Orthod. 2000;70(4):297-302.
  • 11
    Taner TU, Ciger S, El H, Germeç D, Es A. Evaluation of dental arch width and form changes after orthodontic treatment and retention with a new computerized method. Am J Orthod Dentofacial Orthop. 2004;126(4):464-75.
  • 12
    Kook YA, Nojima K, Moon HB, McLaughlin RP, Sinclair PM. Comparison of arch forms between Korean and North American white populations. Am J Orthod Dentofacial Orthop. 2004;126(6):680-6.
  • 13
    Triviño T, Siqueira DF, Scanavini MA. A new concept of mandibular dental arch forms with normal occlusion. Am J Orthod Dentofacial Orthop. 2008;133(1):10-22.
  • 14
    Lombardo L, Saba L, Scuzzo G, Takemoto K, Oteo L, Palma JC, et al. A new concept of anatomic lingual arch form. Am J Orthod Dentofacial Orthop. 2010; 138(3):260.e1-e13.
  • 15
    Kairalla SA, Scuzzo G, Triviño T, Velasco L, Lombardo L, Paranhos LR. Determination of dental arch form and size for using straight-wire arch in lingual technique. Dental Press J Orthod. 2014;19(5):116-22.
  • 16
    Scuzzo G, Takemoto K, Takemoto Y, Takemoto A, Lombardo L. A new lingual Straight-Wire technique. J Clin Orthod. 2010;44(2):114-23.
  • 17
    Takemoto K, Scuzzo G. The straight-wire concept in lingual orthodontics. J Clin Orthod. 2001;35(1):46-52.
  • 18
    Kyung HM, Park HS, Sung JH, Bae SM, Kim IB. The lingual plain-wire system with micro-implant ancorage. J Clin Orthod. 2004;38(7):388-95.
  • 19
    Lombardo L, Carlucci A, Palone M, Mollica F, Siciliani G. Stiffness comparison of mushroom and straight SS and TMA lingual archwires. Prog Orthod. 2016; 17(1):27.
  • 20
    Owen B, Gullion G, Heo G, Carey JP, Major PW, Romanyk DL. Measurement of forces and moments around the maxillary arch for treatment of a simulated lingual incisor and high canine malocclusion using straight and mushroom archwires in fixed lingual appliances. Eur J Orthod. 2017;39(6):665-72.
  • 21
    Long H, Zhou Y, Pyakurel U, Liao L, Jian F, Xue J, et al. Comparison of adverse effects between lingual and labial orthodontic treatment. Angle Orthod. 2013 Nov;83(6):1066-73.
  • 22
    Stamm T, Hohoff A, Ehmer U. A subjective comparison of two lingual bracket systems. Eur J Orthod. 2005;27(4):420-6.
  • 23
    Andrews LF. The six keys to normal occlusion. Am J Orthod. 1972;62(3):296-309.
  • 24
    Ferrario VF, Sforza C, Poggio CE, Serrao G, Colombo A. Three-dimensional dental arch curvature in human adolescents and adults. Am J Orthod Dentofacial Orthop. 1999;115(4):401-5.
  • 25
    Paranhos LR, Andrews WA, Jóias RP, Bérzin F, Daruge Jr E, Triviño T. Dental arch morphology in normal occlusions. Braz J Oral Sci. 2011;9(4):475-80.
  • 26
    Oda S, Arai K, Nakahara R. Commercially available archwire forms compared with normal dental arch forms in a Japanese population. Am J Orthod Dentofacial Orthop. 2010;137(4):520-7.
  • 27
    Ferrario VF, Sforza C, Dellavia C, Colombo A, Ferrari RP. Three-dimensional hard tissue palatal size and shape: A 10-year longitudinal evaluation in healthy adults. Int J Adult Orthodon Orthognath Surg. 2002;17(1):51-8.
  • 28
    Camporesi M, Franchi L, Baccetti T, Antonini A. Thin-plate spline analysis of arch form in a Southern European population with na ideal natural occlusion. Eur J Orthod. 2006; 28(2):134-40.
  • 29
    Park KH, Bayome M, Park JH, Lee JW, Baek SH, Kook YA. New classification of lingual arch form in normal occlusion using three dimensional virtual models. Korean J Orthod. 2015;45(2):74-81.
  • 30
    Leifert MF, Leifert MM, Efstratiadis SS, Cangialosi TJ. Comparison of space analysis evaluations with digital models and plaster dental casts. Am J Orthod Dentofacial Orthop. 2009;136(1):16.e1-e4.
  • 31
    Quimby ML, Vig KWL, Rashid RG, Firestone AR. The accuracy and reliability of measurements made on computer-based digital models. Angle Orthod 2004; 74(3):298-303.
  • 32
    DeKock WH. Dental arch depth and width studied longitudinally from 12 years of age to adulthood. Am J Orthod. 1972;62(1):56-66.
  • 33
    Pepe SH. Polynominal and catenary curve fits to human dental arches. J Dent Res. 1975;54(6):1124-32.
  • 34
    Raberin M, Laumon B, Martin JL, Brunner F. Dimensions and form of dental arches in subjects with normal occlusions. Am J Orthod. 1993;104(1):67-72.
  • 35
    Nojima K, McLaughlin RP, Isshik Y, Sinclair PM. A comparative study of Caucasian and Japanese mandibular clinical arch forms. Angle Orthod. 2001;71(3):195-200.
  • 36
    Chuck GC. Ideal arch form. Angle Orthod. 1934;4(4):312-27.
  • 37
    Bonwill WGA. The scientific articulation of the human teeth as founded on geometrical, mathematical and mechanical laws. Items Interest, 1885;21(9):617-43.
  • 38
    Boone G N. Archwires designed for individual patients. Angle Orthod, 1963;33(3);178-85.
  • 39
    Lundstrom A. Some asymmetries of the dental arches, jaws and skull, and their etiological significance. Am J Orthod. 1961;47(2);81-106.
  • 40
    Interlandi S. New method for establishing arch form. J Clin Orthod. 1978;12(12);843-5.
  • 41
    Capelozza Filho L, Capelozza JAZ. OAID: Objective Anatomic Individual Diagram. A proposal for choosing the form of the arches in the Straight-wire technique, based on both the anatomic individuality and the aims of the treatment. Rev Clín Ortod Dental Press. 2004;3(5):84-92.
  • 42
    Mcnamara C, Drage KJ, Sandy JR, Ireland AJ. An evaluation of clinician's choices when selecting archwires. Eur J Orthod. 2010;32(1):54-9.
  • 43
    Mcnamara C, Sandy JR, Ireland AJ. Effect of arch form on the fabrication of working archwires. Am J Orthod Dentofacial Orthop. 2010;138(3):257.e1-e8.
  • 44
    Wiechmann D, Wong RWK, Hagg U. Incognito: the novel CAD/CAM Lingual Orthodontic appliance. Dental Asia. 2008.
  • 45
    Gottlieb EL. A Farewell to symmetry. J Clin Orthod. 1993;27(7):357-8.

Publication Dates

  • Publication in this collection
    30 June 2021
  • Date of issue
    2021

History

  • Received
    02 July 2019
  • Accepted
    03 Feb 2020
Dental Press International Av. Luís Teixeira Mendes, 2712 , 87015-001 - Maringá - PR, Tel: (55 44) 3033-9818 - Maringá - PR - Brazil
E-mail: artigos@dentalpress.com.br