Open-access River Sediment Analysis by Slurry Sampling FAAS: Determination of Copper, Zinc and Lead

Abstracts

An experimental procedure for direct sediment analysis was developed. Using this procedure, copper, zinc and lead were determined and quantitative recoveries for these metals were accomplished at a low cost and with minimal sample manipulation. The influence of the nitric acid concentration on the slurry preparation, as well as the sediment particle size was investigated. Sediment slurries were treated with 6.0 mol L-1 nitric acid and 2% (m/v) ammonium chloride, and sonicated for 15 minutes in an ultrasonic bath before quantification by flame atomic absorption spectrometry. Using these conditions for a certified reference material, the percentage of recovery for copper, zinc and lead were 96.4 ± 4.9, 97.0 ± 4.0 and 99.7 ± 4.0, respectively.

river sediment; slurry atomisation; FAAS


location_on
Sociedade Brasileira de Química Instituto de Química - UNICAMP, Caixa Postal 6154, 13083-970 Campinas SP - Brazil, Tel./FAX.: +55 19 3521-3151 - São Paulo - SP - Brazil
E-mail: office@jbcs.sbq.org.br
rss_feed Acompanhe os números deste periódico no seu leitor de RSS
Reportar erro