Resumo em Inglês:

The assignment of absolute configuration (AC) is a crucial step in the structural characterization of natural products, especially for those subjected to biological assays. Methods such as X-ray crystallography, stereocontrolled organic synthesis, nuclear magnetic resonance (NMR), and chiroptical spectroscopies are commonly used to determine the AC of chiral natural compounds. Even with these well-established techniques, however, unambiguous stereochemical assignments of natural products remain a challenge, resulting in an increasing number of structural misassignments being reported every year. Herein, we will present the main techniques that have been used in AC reassignments of natural products over the last 10 years, along with some selected examples. Special attention will be paid to the strengths and weaknesses of each approach. With this, we expect to provide the readers with critical information to help them to choose the appropriate methods for correct AC determinations.

Resumo em Inglês:

2-(2-Furyl)-3-hydroxychromone (HL) reacts with MII ions in the formation of quadratic [Cu(L)2] (3), octahedral [M(L)2(OH2)2] (M = Co (1), Ni (2), Zn (4), Mn (5)) and seesaw [M(L)2] (M = Sn (6), Pb (7)) complexes. Recrystallization of complexes 1-3 in presence of pyridine lead to [M(L)2(py)2] (1a-3a) aducts. All compounds were characterized by Fourier transform infrared spectroscopy (FTIR). Complexes 1-7 were analyzed by UV-Vis and diffuse reflectance spectroscopies. The estimated band gap energies range from 2.90-3.15 eV. The crystal structure of complexes 6 and 7 revealed the influence of the stereochemically active lone pair due to their electronic configuration ns2. An intense fluorescence emission band centered at approximately 600 nm (λexc centered at 340 nm) has been observed for complex 6 in the solid state. In N,N-dimethylformamide (DMF) solution, complex 6 showed two emission bands (468 and 538 nm) when excited from 300 to 380 nm, and only one emission band (468 nm) when excited from 385 to 420 nm.

Resumo em Inglês:

Triclosan (5-chloro-2-(2,4-dichlorophenoxy)phenol) is commonly used as an antibacterial agent in various industrial products and is often detected in wastewater effluent. Comparison was made for triclosan degradation by photolysis and TiO2 photocatalysis (under UV irradiation (125 W)) based on analysis of transformation products, together with ecotoxicity evaluation. The morphology of the TiO2 was characterized by X-ray diffractometry (XRD) and field emission gun-scanning electron microscopy (FEG-SEM). Triclosan quantitation was performed by high performance liquid chromatography (HPLC). The optimal condition was obtained using a response surface model and desirability profile. The initial concentration of triclosan used in all the experiments was 10 mg L-1 to achieve comprehensive identification of transformation products. The optimal experimental condition was 30 mg L-1 TiO2 at pH 10. The photocatalytic system achieved > 99% triclosan degradation at 30 min of reaction. The mineralization rates by photolysis and photocatalysis were 25 and 90%, respectively. A total of 27 transformation products were identified using liquid chromatography quadrupole time of flight mass spectrometry (QTOF MS), being that 25 were new structures, not previously reported in the literature. Ecotoxicity assays demonstrated that triclosan and some of the major transformation products did not cause deleterious effects towards Lactuca sativa and Daphnia magna after 16 h of treatment.

Resumo em Inglês:

An alternative green method was developed for the synthesis of thio-and selenoflavones by the ring closure of 2-chlorophenyl ethynyl ketone with NaHY (Y = S, Se). These nucleophilic chalcogen species were generated in situ using NaBH4 to reduce the elemental chalcogen in the presence of polyethylene glycol-400 (PEG-400). The efficiency of this reaction is strongly dependent on the PEG-400 solvent, acting like a crown ether, complexing with the sodium atom of NaHY species, making the chalcogen nucleophile more active. The synthetic protocol proceeded efficiently at 100 °C under argon, using a range of 2-chlorophenyl ethynyl ketone containing alkyl, aryl, or vinyl groups and the sulfur and selenium chalcogen. By this efficient and simple approach, 18 chalcogenoflavones were obtained in good to excellent yields after 2 h.

Resumo em Inglês:

An alternative green route using a domestic microwave oven to synthesize NaGdF4:Yb,Tm and NaYF4:Yb,Er was successfully developed. Decreasing dopants concentration increased the β-NaREF4/α-NaREF4 ratio in NaGdF4. The scanning electron microscopy (SEM) images of NaGdF4 showed particles ranging from 500 nm to 1 μm with formation of aggregates up to 100 μm, with two different surface morphologies. The NaGdF4:Yb,Tm emission spectrum showed white-like emission due to Er3+ and Eu3+ contamination. The bandgaps of undoped NaGdF4 and NaYF4 were measured using synchrotron radiation vacuum-UV (VUV) diffuse reflectance, with values of 10.20 eV for the cubic phase and 10.80 eV for the hexagonal phase for both materials. The determination of the RE2+/3+ energy level positions in these fluorides sheds new light on the design of efficient upconversion materials.

Resumo em Inglês:

Guanitoxin (GNT) is a natural organophosphate produced by some species of freshwater cyanobacteria, which inhibits the active site of acetylcholinesterase, preventing the hydrolysis of cholinesterases and consequently causing serious disturbances in the neuromuscular system. Despite having a chemical structure like synthetic organophosphates, there is still no analytical standard available for environmental and freshwater monitoring. Therefore, this study investigated the stability of GNT under different storage conditions, pH, and temperature. The toxin is produced by the cyanobacterium Sphaerospermopsis torques-reginae and monitored by liquid chromatography coupled to mass spectrometry (LC-MS) and LC-MS/MS for the identification and verification of its stability. The main degradation product formed is the hydroxy-amino-guanidinic derivative of the toxin. The results also indicate that GNT is stable in acidic medium (pH = 3.0), but can gradually degrade at room temperature (> 23 ºC) over a period of 96 h. Lyophilized biomass of S. torques-reginae containing GNT remained stable when stored in a refrigerator below 4 ºC. In addition, the extraction yield is higher when prepared from fresh S. torques-reginae cells than from lyophilized material. Thus, the results shown here contribute with valuable information for studies that aim at the isolation, identification, and monitoring of GNT in samples of raw water and cyanobacterial blooms.

Resumo em Inglês:

Meglumine antimoniate (MA) is a pentavalent antimony (SbV) drug recommended for the treatment of leishmaniasis. It is known that the trivalent antimony (SbIII) present as a residue in MA contributes to the drug side effects. In this article, multivariate optimization was used in the synthesis of MA in order to obtain a drug with low levels of SbIII. Four variables (source of antimony, temperature, water volume and pH) were preliminarily evaluated by 24-1 fractional factorial design. Central composite design (CCD) was used to determine the optimal synthesis conditions, using two different sources of SbV and the significant variables selected in a fractional factorial design. Response surface methodology obtained by CCD provided a model with non-significant regression (p = 0.05) for the synthetic route via KSb(OH)6. On the other hand, synthetic route via SbCl5 reached minimum value of SbIII content of 0.172% and significant regression, and it was selected for further evaluations. The analysis of MA formulations synthesized with SbCl5 under optimized conditions revealed the efficiency of multivariate optimization to reduce SbIII content. In addition, the monitoring of some physicochemical parameters of these formulations maintained at 40 ºC for 90 days, showed that stability was not altered at 95% confidence level.

Resumo em Inglês:

Abstract β,β-Disubstituted-1,3-dinitro compounds were obtained exclusively with an overall yield of 83% through a domino nitroaldol/elimination/1,4-addition process, when excess nitromethane was added to cyclohexanone or butanone using DBU (1,8-diazabicyclo[5.4.0]undec-7-ene), as a basic catalyst. On the other hand, β-nitroalcohols could be obtained in 30-84% yield, when nitromethane reacts with different aliphatic ketones in stoichiometric amounts, in the presence of catalytic amounts of K2CO3(s), Amberlyst® -A21 or TBAF.3H2O (tetra-n-butylammonium fluoride trihydrate)/THF (tetrahydrofuran). In addition, a new and versatile route to obtainment of allylic nitro compounds, by treatment of acetylated nitroalcohols and aldehydes in catalytic amounts of DBU or TBAF.3H2O, via a one-pot elimination/nitroaldol reaction sequence, was developed.

Resumo em Inglês:

This study investigated the chemical composition, immunomodulatory and antioxidant activities, and histopathological analysis of mice tissues treated with methanolic extract from R. marina poison. Marinobufagin, telecinobufagin and bufalin were identified in the chemical profile. The biochemical results demonstrated an effect between doses in the period of 7 days, an immunomodulatory effect was observed regarding the production capacity of interleukin (IL)-12p70 and tumor necrosis factor (TNF)-α at 7 and 30 days, respectively. The lower dose suggests better bioactivity to the treated animal than the higher dose. Histopathological analyses of the lung, heart, kidney and liver showed tissue damage in all organs, mainly in the lung, and were proportional to the dose and the treatment period. We observed that the treatment modulated cytokine production, and therefore this effect may be related to the tissue damage observed. This study demonstrates a positive effect in the antioxidant and immune system, indicating that the molecules found in the extract have biotechnological potential.

Resumo em Inglês:

Solid acid-catalyzed dehydration of fructose to produce 5-hydroxymethylfurfural (5-HMF) has been a hotspot in biomass conversion research in recent years. In this study, a novel SAPO-34-based catalyst was prepared by consecutive steps of titanium doping, sulfuric acid impregnation, and sulfonic acid functionalization. Characterization of the catalyst with X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), BrunauerEmmett-Teller (BET), inductively coupled plasma optical emission spectrometer (ICP-OES), and acid-base titration revealed different pore structures and more acid content compared to SAPO-34. The catalyst was applied to the preparation of 5-HMF by dehydration of fructose, and the maximum yield (74.0%) of 5-HMF was obtained by reacting in dimethyl sulfoxide (DMSO) at 170 °C for 50 min. In addition, the applicability of the catalytic system to other substrates and the stability of the catalyst after five cycles were investigated, which are valuable for further probing on the concerned aspects.

Resumo em Inglês:

Mango industry processing disposes 40-60% of this fruit as residues, such as peels and kernels. The exploration of bioproducts from these industrial rejects can reduce environmental impact besides of producing high value-added materials. In this scenario, carboxymethyl starch nanoparticles were produced from mango (Mangifera indica L.) kernel starch. These nanoparticles were then decorated with thermoresponsive chains of the amino terminated poly(N-isopropylacrylamide) (PNIPAM-NH2), with the intention of evaluating their applicability in the biomedical area. Elemental analysis, Fourier transform infrared (FTIR) and 1H nuclear magnetic resonance (NMR) spectroscopy confirmed successful grafting of PNIPAM-NH2 onto the carboxymethyl starch backbone. Scanning electron microscopy (SEM) images and dynamic light scattering (DLS) data showed sizes of 100 and 112 nm in the dry state and of 744 and 598 nm in the hydrated state, when the grafting degree (GD) was of 6 and 14.3%, respectively. The degree of swelling was of 41,100 and 15,100% for GD of 6 and 14.3% respectively, suggesting that the nanogels are suitable for drug incorporation. The toxicity of the nanogels to human adipose-derived stem cells (ADSCs) and red blood cells (RBCs) was evaluated by lactate dehydrogenase (LDH), alamarBlue and hemolysis assays. Both nanogels were non-cytotoxic and non-hemolytic, suggesting the suitability of these biomaterials for cell-and blood-contacting applications.

Resumo em Inglês:

Metabolomics, together with analytical methods and chemometric tools, point to new paths for selecting species that are resistant to pests and diseases. In this work, the forage palm species' metabolomic profile was investigated, and the relation between the chemical composition and resistance to Dactylopius opuntiae (carmine cochineal). The study was performed in cladodes of different non-susceptible cultivars (Nopalea cochenillifera (L.) Salm-Dyck, Opuntia stricta (Haw.), Nopalea cochenillifera and susceptible cultivar (Opuntia ficus-indica (L.) Mill.)). Metabolic profile showed 28 metabolites detected in the four species. From these total, 18 metabolites were annotated using UPLC-QTOF-MSE (ultra-performance liquid chromatography coupled with an electrospray ionization quadrupole time-of-flight mass spectrometry operating in MSE mode). By comparing the chemical profiles of non-susceptible and susceptible species through the application of chemometric tools, it was possible to obtain biomarkers (quercetin-3-O-2',6'-dirhamnosylglucoside, quercetin rhamnosyl dihexoside, and isorhamnetin-3-sophoroside-7-rhamnoside) that may be associated with resistance to carmine cochineal. Metabolomics based on UPLC-QTOF-MSE and chemometric allowed to establish the biomarkers knowledge of the resistance present in forage palm species. These results contribute to developing the initial understanding of flavonoids' role in the defense mechanisms of cactaceans and can be useful for application in breeding programs; it can increase the chances of success in creating new varieties of plants not susceptible to carmine cochineal.

Resumo em Inglês:

A series of drugs was investigated to determine structural, electronic and pharmacological properties, as well as the molecular affinity for the main protease of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The drugs were submitted to density functional theory calculations to optimize structures and predict binding preferences. The optimized geometries were used in molecular docking simulations. In the docking study, the receiver was considered rigid and the drugs flexible. The Lamarckian genetic algorithm with global search and Pseudo-Solis and Wets with local search were adopted for docking. Absorption, distribution, metabolism, excretion and toxicological properties were obtained from the Pre-ADMET online server. In this series, the antiviral atazanavir showed the potential to inhibit the main protease of SARS-CoV-2, based on the free binding energy, inhibition constant, binding interactions and its favorable pharmacological properties. Therefore, we recommend carrying out further studies with in vitro tests and subsequent clinical tests to analyze its effectiveness in the treatment of SARS-CoV-2.

Resumo em Inglês:

In this study, we investigated the feasibility to obtain nanoparticles (NPs) by assembling pramlintide (Pram) with dextran sulfate (DexS), as a new approach for mucosal peptide delivery. DexS/Pram NPs were prepared by dropwise addition of a Pram solution to a DexS solution under magnetic stirring. The physicochemical characteristics of NPs and molecular interactions involved in the co-assembling were evaluated by dynamic light scattering (DLS), transmission electronic microscopy (TEM), isothermal titration microcalorimetry, Fourier-transform infrared spectroscopy (FTIR), fluorescence quenching, and circular dichroism (CD). DexS/Pram NPs displayed a narrow size distribution (ca. 200 nm), negative zeta potential (ca. −40 mV), association efficiency close to 100%, and nanogel behavior. The assembling with DexS increased the Pram α-helical content, stabilizing the peptide in its bioactive form. The colloidal stability of nanoparticles was dependent on the salt concentration and it could be assumed that peptide release from nanoparticles occurs by dissociation of the complex at physiological conditions.

Resumo em Inglês:

The inhibitory action of three imine-chalcones on carbon steel corrosion in HCl was investigated by theoretical and experimental methods. Quantum descriptors were calculated at the conductor-like polarizable continuum model (CPCM)-Becke-3 Parameter-Lee-Yang-Parr (B3LYP)-D3/def2-TZVPP level allowing the prediction of efficiency inhibition ranking. Electrochemical techniques and mass loss experiments were employed to determine inhibition efficiencies and related experimental parameters. Scanning electron microscopy was employed for metal surface analysis. The N-[(1Z,2E)-1,3-diphenylprop-2-in-1-ylidene]-1-phenethylamine (IM-F) was pointed out as the most efficient inhibitor in this group, with 96% of corrosion inhibition. Moreover, theoretical results obtained from periodic calculations for the adsorption on the Fe(110) surface corroborated the highest efficacy of IM-F.

Resumo em Inglês:

The Amazonian Rubiaceae species Uncaria guianensis (UG) is locally used as anti-inflammatory, antitumor, antidiabetic, anti-ulcers, and others. The phenolic content of its leaves is characterized by the great predominance of the flavonoid kaempferol-3,7-O-(α)-L-dirhamnoside (kaempferitrin). The present study quantitatively evaluates the kaempferitrin content in the leaves and branches of cultivated and wild UG specimens collected in different locations of the Brazilian Amazon rainforest by employing high-performance liquid chromatography coupled to a diode array detector (HPLC-DAD). Besides, the understanding of the polyphenol profile performed by electron spray ionization is deepened by tandem mass spectrometry analysis (ESI-MS/MS), using a previously approached leaf UG extract, and the flavonoid quercetin-3,7-O-(α)-L-dirhamnoside was first isolated from UG. All samples showed quite similar qualitative polyphenol profiles. Kaempferitrin in UG ranged from 1.1 to 1.9 mg 100 mg-1 for dry leaves of adult wild plants, 0.3 to 0.7 mg 100 mg-1 for dry leaves of cultivated young plants and 0.00 to 0.04 mg 100 mg-1 for dry branches of adult wild plants. Besides suggesting the distribution of kaempferitrin in the species, these results reinforce this flavonol as a suitable chemical marker for UG leaves and the products derived from them.

Resumo em Inglês:

The biomass use is of considerable ecological and economical interest and here, biochar, a by-product of biomass carbonization, is magnetized with Fe3O4 for its use as gold nanoparticle (NP) support towards catalysis of p-nitrophenol (4-NP) reduction. Biochar was synthesized from coffee straw biomass via pyrolysis, while magnetite functionalization was obtained using the precipitation method. The magnetite was identified by X-ray diffraction (XRD). The material had a specific surface area of 30 m2 g-1 and a zero point charge of 7.5. The gold NPs were deposited via reduction with NaBH4, which yielded Au and Fe3O4 NP of 4.61 and 10.9 nm, respectively. The materials were applied in the 4-NP reduction, Fe3O4Fe 3 O 4 NPs was observed. Remarkably, comparison with graphene oxide to which biochar resembles showed similar behavior, and the material was reused in several catalytic cycles.