In the present work two different manufacturing techniques of thermoplastic composites are investigated: the conventional hot compression molding and the aqueous suspension prepregging. The first one involves the impregnation of the reinforcement with molten polymer; while the second one uses aqueous polymeric suspensions, where the reinforcement impregnation occurs by its contact with the particle aqueous suspension of a polymeric matrix. This technique combines the powder polymeric matrix with another polymer which forms the suspension, a poly(amic acid - PAA). In this technique, both polymers are deposited simultaneously on the reinforcement during the impregnation. In a second phase of the processing, the PAA is thermally converted in a polyimide (PI) that can form an interphase region between the reinforcement and the polymer matrix. The objective of this study is the synthesis and the characterization of a PAA, based on BTDA/DDS, and the evaluation of its influence on the interphase region in the poly(phenilene sulphite) (PPS)/carbon fiber composite. DSC and TG results show the success of the PAA synthesis and its conversion into PI, which exhibits thermal stability up to 396 °C. The processed composite by polymeric aqueous suspension showed interlaminar shear strength (56.3 MPa) 12.6% higher than the composite obtained by conventional hot compression molding (50.0 MPa). Fracture surface analyses confirm these results, showing that the use of PAA improves the PPS/carbon fiber interphase.
Carbon fiber; interface; synthesis; poly(amic acid)
