Experimental investigation on structural concrete masonry in fire: emphasis on the thermal behavior and residual strength

Análise experimental sobre alvenaria estrutural de blocos de concreto em situação de incêndio: ênfase no comportamento térmico e na resistência residual

abstract:

This paper aims to analyze the thermal behavior and residual mechanical properties of concrete hollow-blocks structural masonry and its component materials in fire situation using experimental investigation. Compression tests were carried out on blocks, prisms and small walls at room temperature and after being exposed for 70 minutes to the ISO 834 Standard Fire. The test at high temperatures was run using a furnace powered by natural gas and instrumented with thermocouples to measure temperatures in the specimens. The influence of the initial concrete strength on masonry behavior was evaluated considering the use of blocks with different strengths at room temperature. In addition, exposure to fire was also investigated considering masonry elements with no coverings and submitted to two different fire exposure conditions: one or both sides. The results indicate a substantial loss in the masonry load capacity at high temperatures, especially in cases of fire exposure on both sides, where the residual compressive strength resulted, on average, between 20% and 27% for the blocks and approximately 14% for prisms and small walls. Its performance with fire heating up on only one face is much higher, with an average residual masonry strength equal to 46% compared to its strength at room temperature. The obtained results are also useful for evaluating masonry regarding the integrity and thermal insulation criteria, the latter achieved with little over 60 minutes of testing.

Keywords:
structural masonry; concrete; fire; residual strength; thermal behavior