Figure 10
Comparison of average values and standard deviation for a) tensile stress, b) strain and c) Young modulus of FDM 3D printed ABS and PLA samples presented in this research with average values gathered from different literature sources 01515 AHN, S.H., MONTERO, M., ODELL, D., et al., “Anisotropic material properties of fused deposition modeling ABS”, Rapid prototyping journal, v. 8, n. 4, pp. 248-257, Oct. 2002., 1919 DRUMMER, D., CIFUENTES-CUÉLLAR, S., RIETZEL, D., “Suitability of PLA/TCP for fused deposition modeling”, Rapid Prototyping Journal, v. 18, n. 6, pp. 500-507, Sep. 2012.,02020 LETCHER, T., RANKOUHI, B., JAVADPOUR, S., “Experimental study of mechanical properties of additively manufactured ABS plastic as a function of layer parameters”, In: ASME 2015 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, pp. V02AT02A018-V02AT02A018, Nov. 2015., 2121 TYMRAK, B.M., KREIGER, M. PEARCE, J.M., “Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions”, Materials & Design, v. 58, pp. 242-246, June, 2014., 3636 NOVAKOVA-MARCINCINOVA, L., NOVAK-MARCINCIN, J., “Verification of mechanical properties of ABS materials used in FDM rapid prototyping technology”, In: Proceedings in Manufacturing Systems, v. 8, n. 2, pp.87-92, Jun. 2013., 3737 WENG, Z., WANG, J., SENTHIL, T., et al., “Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing”, Materials & Design, v. 102, pp. 276-283, Jul. 2016., 3838 CARRASCO, F., PAGÈS, P., GÁMEZ-PÉREZ, J., et al., “Processing of poly (lactic acid): characterization of chemical structure, thermal stability and mechanical properties”, Polymer Degradation and stability, v. 95, n. 2, pp. 116-125, Feb. 2010., 4040 BENIAK, J., KRIŽAN, P., MATÚŠ, M., A, “A comparison of the tensile strength of plastic parts produced by a fused deposition modeling device”, Acta Polytechnica, v. 55, n. 6, pp. 359-365, Dec. 2015.0.
