PHYSICAL, MORPHOLOGICAL PROPERTIES AND RAMAN SPECTROSCOPY OF CHESTNUT BLIGHT DISEASED CASTANEA SATIVA MILL. WOOD

In this study, some of the physical and anatomical properties of Chestnut Blight Diseased (CBD) wood were investigated, and the study also included observations using Raman spectroscopy. The objective of these investigations was to determine the extent of the damage that is done to the wood of the diseased chestnut trees, which must be removed from the forest and used in the manufacture of industrial products. It was indicated that most of the adverse effects of the disease were in the vascular cambium. There was a clear indication of deterioration of the wood in the last growth ring next to vascular cambium. In the diseased secondary xylem region next to vascular cambium; vessel diameter, vessel frequency and vessel element length had a decrease, and vessel and other cells were irregular compared to healthy wood. Spores were detected and identified as Cryphonectria parasitica (Murrill). Annual ring properties (annual growth ring width, latewood percentage, etc.) were similar in diseased wood compared to healthy wood. The Raman spectroscopy results showed no significant changes in the structure of the cell wall or its components. After removing the diseased parts, unlimited usage of formerly wood is possible. Heat treatment of the wood is suggested before use in the interest of sanitation and dimensional stability. PROPRIEDADES FÍSICAS E MORFOLÓGICAS E ESPECTROSCOPIA RAMAN DE MADEIRA DE CASTANEA SATIVA MILL. AFETADA PELO CANCRO DO CASTANHEIRO RESUMO: Neste estudo, algumas das propriedades físicas e anatômicas de madeira afetada pelo cancro do castanheiro (CBD) foram investigadas, e o estudo também incluiu observações usando espectroscopia Raman. O objetivo destas investigações foi determinar a dimensão do dano que é causado na madeira dos castanheiros doentes, que devem ser removidos da floresta e utilizados na fabricação de produtos industriais. Foi avaliado que a maioria dos efeitos adversos da doença esta localizado no câmbio vascular. Há uma clara indicação de deterioração da madeira no último anel de crescimento junto ao câmbio vascular. Na região doente do xilema secundário ao lado do câmbio vascular o diâmetro, frequência e comprimento do vaso eram menores, e os vasos e outras células eram irregulares comparados à madeira saudável. Esporos foram detectados e identificados como Cryphonectria parasitica (Murrill). Propriedades dos anéis anuais (largura de anéis de crescimento anual, porcentagem de lenho tardio, etc.) foram similares em madeira doente e madeira saudável. O resultado da espectroscopia Raman não mostrou mudança significativa na estrutura da parede celular ou dos seus componentes. Depois de retirar as partes doentes, o uso ilimitado da madeira é possível. Tratamento térmico da madeira é sugerido antes da utilização para fins de saneamento e estabilidade dimensional.


INTRODUCTION
Chestnut (Castanea sativa Mill.) trees are generally distributed in the southern part of Europe, East Asia, Europe, and eastern North America, and they have been an important resource due to their vital nutritional, cultural, and economic importance for thousands of years.Chestnut trees provide edible fruit and goodquality timber in many countries, including China, Turkey, Italy, and Korea (DOGU et al., 2011;METAXAS, 2013).The chestnut is produces in various countries (Table 1).
Dried chestnut wood has a high resistance to decay due to extractive compounds, such as tannins.Chestnut wood is used for many applications, such as the construction of buildings and wooden furniture, shipbuilding, timbers, and musical instruments.This important tree species was used extensively until the ocoruence of the fatal disease chestnut blight (CBD) caused by Cryphonectria parasitica (Murrill), which was first observed in the United States.In 1905, it was observed that American chestnut trees were dying in the Bronx Zoological Park in New York City (Anagnostakis 1987;Yazici 1998;Locci 2003;Jacobs 2007;Gündüz et al. 2011).Later, in 1938, the deadly fungus was observed for the first time in Europe, and it spread rapidly all over Italy and surrounding countries, becoming one of the major pathogens that attacked chestnut trees and leading to serious damage to European forests (Anagnostakis 1987;Robin and Heiniger 2001).Fig. 1 shows the history of the distribution of the disease in Europe.
In stationary growth, the fungus produces in vitro a large amount of an exopolysaccharide fraction that contains pullulan, a linear α-glucan β-D-galactan, and a galactomannan, all of which showed greater phytotoxic activity than that of the crude exopolysaccharide fraction (LOCCI, 2003;MOLINARO et al., 2000).The pathogen infects stem tissues and kills the above ground portions of trees by girdling the cambium.Chestnut blight cankers can be seen most easily on the bark of juvenile trees when their bark is wet.At that time, the orange color of the epidermis is usually obvious where the mycelium of the fungus has penetrated.Cankers are not easily seen on mature bark, where often the first sign of blight infection is the formation of the epitomic shoots below the canker.Castanea dentata has a ring-porous wood with larger early wood vessels formed in the spring.If the cambium is unable to make new vessels because it was killed by chestnut blight or some other injury, the tree forms shoots to bypass the blockage (ANAGNOSTAKIS, 1987;BARAKAT et al., 2012).
Many studies have been conducted in an effort to identify an approach or approaches that will stop and/ or heal this disease.The simplest method to control the disease is removing the diseased branches of the diseased chestnut trees (FREINKEL, 2007).The hypo-virulent fungi strains in diseased chestnut woods also have been used as a biological control; this fungi is easy to identify because of its characteristic pathogenetic effect and the color of the mycelium (yellow in the virulent strains, white in the hypo-virulent strains) (ANAGNOSTAKIS, 1987(ANAGNOSTAKIS, , 2001;;LOCCI, 2003).
Many studies have been conducted about the control with hypovirulent strains which is useful but requires extensive effort because every individual tree must be inoculated, and the inoculations are not 100% effective (ROBIN;HEINIGER, 2001).Schafleitner and Wilhelm (1997) indicated that chestnut trees diseased by hypovirulent strains survive due to their recognition and induction of defense mechanisms.Another potential method for preventing the disease is to increase the trees' natural resistance against the pathogen.Tests on forests and agricultural plants in Turkey, Russia, and Azerbaijan have been conducted using effective microorganisms (EM) to produce plants that are resistant to environmental biotic and abiotic stresses.It is known that chestnut trees start to fructify after 5-7 years, but sample tress treated with EM fructified after 3-4 years in the same conditions.The results showed that EM technology can increase the productivity and resistance of chestnut trees (ALLAHVERDIYEV et al., 2011).Another study compared the bark extracts based on the inhibitory activity on fungal polygalacturonase and found Chinese chestnut bark extracts to be better inhibitors than American chestnut bark extracts.It also was found that a proteinaceous fraction of Chinese bark was a highly effective inhibitor of the same enzyme (HAVIR; ANAGNOSTAKIS, 1998).Defense-related genes with differential transcript abundance (GDTA) are candidates for host resistance to the chestnut blight fungus, Cryphonectria parasitica (Murrill).The salicylic acid (SA) pathway, which is considered one of the major pathways involved in the defense against nectrotrophic pathogens, regulates the expression of defense effector genes and systemic acquired resistance through the repression of the auxin signaling pathway.Abscissic acid (ABA) is another hormone that affects the resistance of chestnut trees against this disease.Other signaling genes involved in systemic acquired resistance (SAR), which is an effective defense mechanism against a broad range of pathogens and insects, induce numerous defense genes, include apoplastic lipid transfer protein and basic chitinase.Anti-fungal tests showed that proteins with a chitin binding domain, i.e., proteins C1, C3, and C4, inhibit hyphal growth of the chestnut blight fungus Cryphonectria parasitica (Murrill.) in culture (VANNINI et al., 1999;BARAKAT et al., 2012).
The reason and headway of the CBD are well known, and the main weights of the studies are about the CBD itself and the protection and cure of the disease.Diseased trees are removed from the diseased areas and used in various ways.Obviously, the anatomy and physical properties of the timber are factors in deciding how it will be used.There also is a lack of research about the detailed structure of the changes in the vascular cambium, secondary xylem and phloem as a result of the disease.The aim of this study was to determine and compare the anatomy and the physical properties of blight-diseased chestnut wood and healthy chestnut wood and their potential uses.

Material
A single chestnut tree was chosen for use in this study in Bartin -Amasra forestry district (41°43'34.2"N32°24'19.0"E)location.This decision was made because it was concluded that the comparison of the physical and anatomical changes in the healthy and diseased zones of the same tree would produce more statistically reliable results.Another reason to select a single sample tree is to eliminate genotypical differences in different individuals.
The sample tree was 15 m in height and 32 cm in diameter.The tests specimens were taken at 1.60 m height above the ground in the form of a disc that includes the infected area.The disc was cut into 2 x 2 x 3 cm sized samples to compare and to fi nd out the long term effect of the disease.These samples covers all parts of the cross section (from bark to pith) and were prepared for a number of analyses, such as anatomical characterization by light microscopy (LM), scanning electron microscopy (SEM/EDX), Raman spectroscopy (RS), and physical properties, such as density, wood-water relations, bulk density, and macroscopic properties (Figure 2).The long term annual  average temperature and participation of Bartin is 12.7 °C and 86.59 kg/m 2 respectively (MGM, 2014).
Annual ring properties (sapwood and heartwood ratio, latewood percentage) also were measured by using stereomicroscopy, and the results were evaluated.All statistical analysis (Anova and Tukey Multiple Comparison Test) were made with StatgraphicsPlus software.

Determination of Anatomical Properties and Morphological Characterization
Both diseased and healthy wood samples with dimensions of 2 x 2 x 3 cm were taken from a diseased chestnut tree to determine the anatomical features of thin (20 μm) transverse, radial, and tangential sections.This was done by using a Eidg.Forschungsanstalt für Wald, Schnee und Landschaft (WSL) lightweight G.S.L. -1 microtome for the light microscopical study of wood anatomy.All of the anatomical sections were prepared as recommended by Gaertner and Schweingruber (2013).To achieve statistically reliable results, the guidance provided by The International Association of Wood Anatomists Committee -IAWA Committee (1989) was used to determine the diameter, element length, and frequency of the vessels; the length, width, lumen width, and thickness of the cell wall of the fi bers; and the width, height, and frequency of the rays.The vessel element and fi ber length were measured on macerated wood (WISE et al., 1946).
Specimens of the fungi were taken to the laboratory and microscopically examined under Leica DM 750 digital imaging system Sections were hand cut using a razor blade.The fungi were identifi ed using the relevant literature (Saccardo 1882;Saccardo 1905;Mel'nik 2000;Gruyter et al. 2010).Host plants were identifi ed using the "Flora of Turkey and East Aegean Islands" (Davis 1982).Taxa, family, and author citations were listed according to (Cannon and Kirk 2007; Kirk et al. 2008), and fungal names according to Index Fungorum (www.speciesfungorum.org,accessed 2015).

Raman Spectroscopy Preperation
Raman spectroscopy was conducted on the samples prepared for the light microscopy analysis.FT-Raman spectra of all samples were recorded with a RENISHAW inVia Raman Microscope between 300 and 3000 cm -1 .Grating 1200 l/mm, exposure time of 10 s.Laser power was between 0.3% (diseased wood) and 0.5 % (healthy wood) at a wavelength of 785 nm.The slit opening was 50 µm (centre 1672 µm).
For the morphological analysis, the healthy and diseased samples were observed after fracture of the samples under nitrogen with an environmental scanning electron microscope (ESEM) (FEI QUANTA FEG 450) with an accelerating voltage of 5 kV.The samples were coated with an Au film, and the SEM images were obtained using a secondary electron detector (ETD).
The data in Table 2 indicate that there was no difference in the fully-dried density values of the healthy and diseased samples, which were 0.56 and 0.55 g .cm -3 , respectively, whereas the air-dried density was 0.59 g .cm -3 for the healthy samples and 0.64 g .cm -3 for the diseased samples.This result was found to be statistically significant.The variation of the density showed that the diseased wood absorbed less water than the healthy wood.The cell wall material ratio for the healthy wood and the diseased wood were both around 37%, and the air gap ratios for the healthy and diseased wood were both about 63%.The fiber saturation point, dimensional changes, and the density value in volume of the samples were shown in Table 3.
The density values in volume were determined to be 0.47 g .cm -3 for the healthy samples, whereas the diseased samples had a value of 0.50 g .cm -3 ; according to the variance analyses results, there was no statistically significant difference between these two groups.Shrinking and swelling values were determined as 10.2 and 11.3%, respectively, for the healthy samples and 9.6 and 11.1%, respectively, for the diseased samples.The small difference between the shrinking and swelling values of the two groups indicated why the diseased samples were denser.Thus, it can be said that this situation can be balanced while diseased wood contains less moisture.The highest water absorption of the wood was determined to be about 159% for the healthy samples and about 133% for the diseased wood, and this difference was statistically significant.The fiber saturation points for the healthy and diseased samples were about 22 and 19%, respectively.In light of these results, it can be said that the diseased wood contained less cellulose and hemicellulose because the components of the cells' walls contained fewer free OH -groups, resulting in less water molecules binding to the cells.It is suggested that the decrease of the cellulose and hemicelluloses in the cell material resulted from Cryphonectria parasitica (Murrill) using cellulose and hemicelluloses as the carbon source for the development of its own colony.

Annual Ring Properties
Widths of the heartwood and sapwood, the number of annual rings of heartwood and sapwood, and the ratio of the diameter of the heartwood to the barkfree diameters of the healthy and diseased portions of the chestnut wood (Table 4).
Table 5 provides the annual ring widths, which is the one of the macroscopic properties of the wood, the correlation between the width of the annual rings of wood and the width of late wood, and the mean participation rate of late wood in the annual ring values of the healthy and diseased chestnut wood.
The relationship between the width of the annual rings and the late wood of the healthy and diseased portions of chestnut wood was determined by regression analysis.Accordingly, the regression coefficient of the healthy portion was found to be (r) = 0.955, which means this relationship was strong.As a result of the regression analysis of the diseased wood, the correlation coefficient was found to be (r) = 0.964, and this relationship also was strong.Both relationships, i.e., for diseased and healthy wood, were determined to be similar and significant.

Anatomical Properties
Table 6 and 7 provide the average values of the diameter and frequency of the vessels and the average values of width, height, and frequency of the rays.
In both the healthy and diseased parts of the chestnut wood, ring porosity was present, and the annual rings were distinct.The porosity and distinctness of the annual rings were not changed in the diseased wood.However, the tangential and radial diameters of the vessels were 181 -260 µm in the earlywood of the diseased part and 195 -274 µm in the earlywood of the healthy part.These diameters for the late wood were determined to be 42 -52 µm and 44 -55 µm, respectively.The tangential and radial diameters of the vessels were smaller in the diseased wood than in the healthy wood.The average vessel frequency in the earlywood of the diseased and healthy parts were 5.7 and 5.9, respectively.The vessel frequency values in the latewood were determined to be 44 and 29, respectively.It can be seen that the number of vessels  (vessel frequency) in the latewood was 34% lower than that in the healthy parts.The average width of the rays was found to be 18 µm, and there was no difference in this value between the healthy and diseased samples.However, the height of the rays and their frequency for the diseased woods were 246 µm and 8 units respectively, whereas they were 264 μm and 11 units respectively, for the healthy wood.These data indicate that there were fewer and lower rays in the diseased portions.
According to the measurements of the macerated wood, the lengths, widths, and wall thickness of the fibers and the lengths of the vessel elements have lower values in the diseased chestnut wood (Table 8). Figure 3 shows general views of the cells.In light of these values, it was concluded that the physiological and cambial activities of the diseased site of the chestnut tree were slowed by Cryphonectria parasitica (Murrill).
In general, there are no variations in the shapes of the vessel elements, but smaller vessel diameters and smaller vessel frequency were determined in the transverse section of the diseased wood.Moreover, the lengths of the vessel elements were shorter in the diseased part.When we examined the morphologies of the fiber cells, it was observed that the diseased wood's fibers had abnormal formation than those of the healthy wood.Also, bifurcations and different irregular structures were observed at the ends of the fibers of the diseased wood (Figure .3).
The bifurcated ends of fibers might be a result of the increase of anticlinal divisions in the vascular cambium under stress conditions caused by the fungus.This phenomena can also be seen in compression wood in Gymnosperms as a result of developmental processes (anticlinal division and following it the intrusive growth) (TULIK, 2000).
This in turn, one may think, causes the surface of the diseased wood to become rougher, and this also may cause difficulty in processing the wood material.These formations are very limited and easy to remove, so they do not affect the economic value of the wood.

SEM/EDX and LM on the cambium tissue
Light microscope images of the vascular cambium, secondary xylem and secondary phloem are indicating significant differences between diseased and healthy parts (Figure 4).While the images of the healthy parts had highly regular appearances, abnormalities can be observed in the shapes of the cells of the diseased parts.While cell walls can be clearly distinguished in the healthy parts, this is not true for the diseased parts.To support these findings, healthy and diseased parts were studied in detail by using an electron microscope, and the resulting SEM images are presented in Figure 5.
The SEM images showed the same irregularities in the diseased vascular cambium and secondary xylem.A silky and irregular appearance of the wood surface showed the clear difference in Figure 5 d and h.
In parallel to these changes, EDX analysis was conducted to whether there were different chemical substances in the structure of the healthy and diseased woods, Figure 9 and Figure.10, respectively.
Different substances were determined in the EDX analysis done on the diseased vascular cambium.There was about 5% nitrogen in the vascular cambium according to the elemental analysis.Based on this result, it can be said that there is a chemical change in the vascular cambium in the diseased part.

SEM/EDX on the tangential direction of wood
Figure 6 shows various sizes of the parenchyma cells in the SEM images of the tangential sections of the diseased wood, and in some of the parenchyma cells, starch grains were observed.These grains only existed in some of the parenchyma cells.While only a single grain was determined in some parenchyma cells, others had 20-30 such grains.For better visualization, the SEM images of these grains are presented in Figure 7 a, b, e and f.
As a result of this observation, starch grains were observed in healthy and diseased wood.In addition, when the internal structure of the vessels were examined in tangential section, the surface was found to be smooth in healthy wood (Figure 7 g-h), while some granular formation was observed on the diseased wood (Figure 7e-d).It is likely that these structures resulted from the activity of the disease.Figure 8 shows the results of the elemental analyses of the starch grains that were conducted by SEM/EDX.The SEM/EDX analysis indicated that the structure of the starch grains was composed of carbon and oxygen.

Spore analysis
As a result of the analyses and other investigations, the chestnut wood fungus that caused this disease was determined to be Cryphonectria parasitica (Murrill) (Figure 9).According to the data that were acquired, the fungus penetrates into the wood through the spaces between the sections of bark, and then it causes changes, specifically in the vascular cambium, and in the fibers and vessels of the wood.The analysis of the fungus showed that the formations were Cryphonectria parasitica (Murrill) ascospore.The following properties were evaluated: Stromata scattered, valsoid, yellow to yellowishbrown, brownish-red, prosenchymatous, up to 3 mm wide and 2.5 mm high.
The identifi cation of the fungus was conducted using the identifi cation keys to compare the differences in shapes and sizes of spores, and the fact that the microfungus was on a specifi c host plant also helped in the identifi cation process.Similar results were obtained in a study on CBD diseased wood, and Cryphonectria parasitica (Murrill) was found to be an ascomycete that utilizes wounds in the bark of chestnut trees to gain access and cause infection.The fungus grows in the bark of the tree, in characteristic fan-shaped mycelia, producing a canker on the tree.As the fungus grows, it colonizes the phloem and moves towards the vascular cambium and secondary xylem, destroying tissues as it progresses (GORDH; MCKIRDY, 2014).
To determine how it affects cellulose, hemicelluloses, and lignin, Raman analyses were performed on the cell wall of the vascular cambium, and the results are shown graphically in Figure10.
FT-Raman band assignments for hardwoods can be summarized as follows: (EVANS, 1991;KENTON;RUBINOVITZ, 1990;OLDAK et al., 2005), the peak at 2907 cm −1 corresponds with cellulose and hemicellulose, and the shoulder at 2939 cm −1 relates to the presence of extractives and hemicellulose (Figure 10).The expected very intense peak with a shoulder at 1600 and 1660 cm −1 (LEWIS et al., 1994;ONA et al., 1997) are attributed to lignin.The phenol mode is expected at 1190 cm −1 , the lignin-carbohydrate complex has a peak at 1271 cm −1 , the cellulose peak at 1341 cm −1 and a very weak lignin and extractives peak located at 1297 cm −1 had also all disappeared.In the low frequency region of the Raman spectra of the hardwood samples, the shoulders on the cellulose peaks located at 353-380 and 436-459 cm −1 band level (GIERLINGER; SCHWANINGER, 2007).The hemicellulose peaks at 496-521 cm −1 also had shifted to 538 cm −1 and decreased in band intensity (PETROU et al., 2009).
According Table 10, similar peaks at the same point were found for both healthy and diseased samples; however, the intensities of the peaks of the healthy samples were determined to be lower than those of the diseased samples.In comparison with the healthy and diseased samples, it can be said that diseased samples appeared to have lost less carbohydrate and lignin than the healthy samples.

CONCLUSION
This is the fi rst detailed study that has been conducted on Cryphonectria parasitica (Murrill) diseased Anatolian Chestnut trees.The SEM analysis showed that the cell structure changed in the vascular cambium and secondary xylem of the diseased tree.The cell structure was more irregular than in healthy trees.Due to its regional effect on the inner bark and vascular cambium, the diseased parts can be removed easily.The results   according to density and wood-water-related physical properties showed that the usability of the diseased chestnut wood is not limited.One way to prevent the spread of the disease in forests is to remove the diseased trees.These logs can be used in making furniture, shipbuilding, wooden building construction, and musical instruments.Heat treatment can be suggested for more dimensional stability and especially for sterilization of the timber obtained from the diseased trees.The physical properties, such as wood-water relations and density, did not change signifi cantly.The yield of wood in diseased trees does not signifi cantly decrease, and the wood can be used for quality timber production.The observation with unknown cause was that there was a granular appearance on the inner side of the vessels in  1963).Another difference between the diseased and healthy tissues of the wood was the increased percentage of elemental nitrogen in the diseased wood.This result confi rmed that the CBD needed nitrogen.The Raman spectroscopic results showed a similar structure, but it can be said that the diseased samples appeared to have lost less carbohydrate and lignin than the healthy samples.The irregular cell structure of the vessels and fi bers of the diseased wood showed some similarity with cancer in animals and humans.AGARWAL et al., 1996;AGARWAL;KAWAI, 2003;ATALLA;AGARWAL, 1985;BARSBERG et al., 2005;FISCHER et al., 2005;LAVINE et al., 2001;LEWIS et al., 1994;PETROU et al., 2009).

FIGURE 1
FIGURE 1 Distribution of chestnut blight disease in Europe (Robin and Heiniger 2001).
such as: TS 53 Wood -Sampling and test methods -Determination of physical properties TS2471 Wood -Determination of Moisture Content for Physical and Mechanical Tests; TS2472 Wood -Determination of Density for Physical and Mechanical Tests; TS4083 Wood -Determination of Radial and Tangential Shrinkage; TS4084 Wood-Determination of Radial and Tangential Swelling; TS4085 Wood -Determination of Volumetric Shrinkage; TS4086 Wood-Determination of Volumetric Swelling (TURKISH STANDARTS

FIGURE 2
FIGURE 2 Samples used in the study: (a) appearance of the sample tree in the forest; (b) samples for microscopic (LM, SEM) and Raman spectroscopy investigation.

FIGURE 3
FIGURE 3 Fiber and vessel element of healthy and diseased wood: (a) vessel element of the diseased wood; b, c, d) bifurcated formations on the fi bers of diseased wood and surface disturbances; (e) vessel element of the healthy wood; (f) healthy wood fi ber (Light Microscopy).

FIGURE 6
FIGURE 6 SEM images of the tangential sections of the diseased wood: starch grains in the ray parenchyma cells (a-b-d) and axial parenchyma cells (c).

FIGURE 7
FIGURE 7The SEM images of the starch grains in the parenchyma of the diseased (a and b) and healthy wood (e and f).Vessel inner cell wall surface in diseased (c and d) and healthy (g and h) wood.
the diseased zone.Generally, this warty layer develops during the last stages of cell differentiation and consists of the remnants of the protoplast (LIESE; LEDBETTER,

FIGURE 8
FIGURE 8 EDX analysis of the starch grains.

FIGURE 9 FIGURE 10
FIGURE 9Analysis of the spores observed on the wood.

TABLE 1
Chestnut production by various countries (FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED STATES -FAO, 2012).

TABLE 2
Air-dried and fully-dried density (ρ12% and ρ0%, respectively), cell wall material rate (CWR), and air space rate (ASR) values of the samples

TABLE 3
Fiber saturation point, dimensional changes, and the density value in volume of the samples.

TABLE 4
Heartwood and sapwood measurements and annual ring numbers of healthy and diseased portions of chestnut wood.

TABLE 5
Values related to the annual rings of healthy and diseased chestnut wood.

TABLE 6
Average values of the diameter and frequency of the vessel.

TABLE 7
Average values of the width, height, and frequency of the rays (N=250).

TABLE 8
Average values of width, lumen width, length, and double cell wall thickness of the fibers and vessel element length (N=50).

TABLE 9
EDX analysis zones of cambium tissues belonging to the healthy (A) and diseased (B) wood.

TABLE 10 FT
-Raman band assignments for hardwoods reported in the literature (