Acessibilidade / Reportar erro

Electronic Structures of Cu/S Co-doped/Anatase TiO 2 by First-principles

ABSTRACT

The structural parameters, band structures and density of states of anatase TiO2 co-doped with Cu and S were calculated by first-principles based on the density functional theory. The results indicate that the volumes of the co-doped TiO2 increase due to the lattice distortion. The calculated X-ray diffraction pattern shows that the crystal phase of TiO2 is still kept as anatase after Cu and S co-doping. The band gap of TiO2 broadened when S substitutes for Ti or O along with Cu substitutes for Ti. The calculated partial density of states shows that the impurity energy levels mainly come from the Cu 3d and S 3p orbital. The calculated results may provide some theoretical foundations for the photocatalytic activity enhancement of TiO2 co-doped with Cu and S.

Keywords:
Anatase TiO2; Cu/S co-doping; first-principles

1. INTRODUCTION

TiO2 has been widely used in the photocatalytic field due to its non-toxicity, anti-oxidation, long-term stability and strong redox ability. When TiO2 particles are irradiated by photons with energy greater than the band gap of TiO2, the electrons in the valence band will transit to the conduction band and leave holes in the valence band. The electron-hole pairs can participate into all kinds of chemical reactions on the surface of TiO2 and eventually degrade the pollutants in the solution. Due to the quick recombination of electrons and holes, the photocatalytic activity of TiO2 is decreased greatly. In order to obtain a higher photocatalytic activity, doping metal and/or non-metal ions into the crystal lattice of TiO2 is one of the mostly used methods. Sahoo and Gupta [1[1] SAHOO, C., GUPTA, A.K. "Characterization and photocatalytic performance evaluation of various metal ion-doped microstructured TiO2 under UV and visible light", Journal of Environmental Science and Health, Part A, v. 50, n. 7, pp. 659-668, 2015.] synthesized Ag and Fe ions doped microcrystalline TiO2 following a liquid impregnation technology. It was found that the Ag doped TiO2 could degrade as high as 99% of the pollutants under UV light. Under visible light, Fe doped TiO2 could degrade more than 96% and 90% for methylene blue and methyl blue, respectively. Vu et al. [2[2] VU, T.A., DAO, C.D., HOANG, T.T., et al., "Study on photocatalytic activity of TiO2 and non-metal doped TiO2 in Rhodamine B degradation under visible light irradiation", International Journal of Nanotechnology, v. 10, n. 3-4, 235-246, 2013.] synthesized highly active photocatalytic TiO2 nanotubes by hydrothermal treatment in base medium using commercial TiO2 powder as Ti-source. Then non-metal doped TiO2 samples were made by post-synthesis using urea, thiourea, ammonium fluoride and ethylene glycol as N, S, F and C source. The degradation of Rhodamine B indicated that non-metal doped TiO2 samples exhibited much higher photocatalytic activity under visible light irradiation as compared to that of non-doped TiO2 sample. Khan et al. [3[3] KHAN, M., GUL, S.R., LI, J., et al., "Preparation, characterization and visible light photocatalytic activity of silver, nitrogen co-doped TiO2 photocatalyst", Materials Research Express, v. 2, n. 6, pp. 066201, 2015.] synthesized Ag/N co-doped TiO2 photocatalyst by hydrothermal method. The photocatalytic response is evaluated by the photodegradation of methylene blue under visible light irradiations. The results indicated that the co-doped TiO2 showed a higher photocatalytic activity compared to pristine TiO2.

To understand the reasons for the photocatalytic activity enhancement of TiO2 from an atomic level, theoretical calculations of the electronic structures of doped TiO2 systems are always carried out using the first-principles based on the density functional theory. Zheng et al. [4[4] ZHENG, S.K., WU, G.H., LIU, L. "First-principles calculations of P-doped anatase TiO2", Acta Physica Sinica, v. 62, n. 4, pp. 043102, 2013.] calculated the electronic structures of P doped anatase TiO2. It was found that the interstitial P doping maybe play an important role in the photocatalytic activity improvement of TiO2. The calculated electronic structures of Bi doped TiO2 [5[5] WU, G.H., ZHENG, S.K., LV, X. "First-principles calculation of bi-doped anatase TiO2", Chinese Journal of Inorganic Chemistry, v. 29, n. 1, pp. 9-14, 2013.] indicated that Bi doping introduced impurity energy levels into the forbidden band of TiO2 and resulted in a broadened band gap. The impurity energy levels were more important to the doped TiO2 and could lead to a higher photocatalytic activity for TiO2. Zhu and Liu [6[6] ZHU, X.H., LIU, J.M. "First principles calculations of electronic and optical properties of Mo and C co-doped anatase TiO2", Applied Physics A, v. 117, n. 2, pp. 831-839, 2014.] calculated the electronic structures of Mo, C and Mo/C doped TiO2 using Vienna ab initio simulation package. The calculated results indicated that the optical absorption edges of the Mo-C co-doped TiO2 shifted towards the visible light region and the effective band gap was narrowed about 0.9 eV.

Recently, there are some papers reporting the photocatalytic activity of Cu/S co-doped TiO2 (Cu/S-TiO2). Yan et al. [7[7] YAN, C.Y., YI, W.T., YUAN, H.M., et al., "A highly photoactive S,Cu-codoped nano-TiO2 photocatalyst: Synthesis and characterization for enhanced photocatalytic degradation of neutral red", Environmental Progress & Sustainable Energy, v.33, n. 2, pp. 419-429, 2015.] synthesized Cu/S-TiO2 by sol-gel method and the photocatalytic performance of the samples was evaluated by the degradation of neutral red under UV and visible light illumination. The results showed that Cu/S-TiO2 calcined at 450oC had the highest photocatalytic activity among all the samples, and the photocatalytic degradation of neutral red solution could reach 98.4% under UV illumination. Yi et al. [8[8] YI, W.T., YAN, C.Y., YAN, P., et al., "A new perspective for effect of S and Cu on the photocatalytic activity of S,Cu-codoped nano-TiO2 under visible light irradiation", Journal of Sol-Gel Science and Technology, v. 69, n. 2, pp. 386-396, 2014.] prepared Cu/S-TiO2 nanoparticles by sol-hydrothermal process. The photocatalytic activity of Cu/S-TiO2 was investigated with Acid Orange 7 as the model compound under visible light illumination. The results showed that Cu/S-TiO2 had the highest visible light photocatalytic activity and good reusability performance. Zhang et al. [9[9] ZHANG, W.Y., WANG, S.J., LI, J.G., et al., "Synthesis of Cu/S-TiO2 photocatalysts for hydrogen generation", Materials Research Innovation, v. 17, n. Supplement 1, pp. 3-6, 2013.] and Li et al. [10[10] LI, F.F., WANG, Z., YANG, C., et al., "Preparation of Cu/S-TiO2 photocatalysts and their catalytic activities under visible light", Journal of Molecular Catalysis (China), v. 26, n. 2, pp. 174-183, 2012.] modified S-doped TiO2 with Cu using electroless plating, wet impregnation and chemical reduction, respectively. It was found that Cu/S-TiO2 prepared by electroless plating method showed excellent visible light absorption ability, and the catalyst exhibited the highest photocatalytic activity for hydrogen generation in methanol solution under simulated sunlight. Wang et al. [11[11] WANG, Z., LI, F.F., YANG, C., et al., "Photocatalytic reduction of CO2 using Cu/S-TiO2 prepared by electroless plating method", Advanced Materials Research, v. 233-235, pp. 589-595, 2011.] fabricated S-TiO2 via calcination of TiO2 precursor and thiourea, then Cu species were plated on the surface of S-TiO2 by electroless plating method. The results showed that Cu/S-TiO2 had an excellent visible light absorption and photocatalytic reduction of CO2 could be achieved under UV and visible light irradiation. Hussain et al. [12[12] HUSSAIN, S.T., MAZHAR, M., SIDDIQA, A., et al., "Cu-S coped TiO2 nanophotocatalyst for the degradation of environmental and industrial pollutant", The Open Catalysis Journal, n. 5, pp. 21-30, 2012.] prepared S-doped TiO2 nano-photocatalyst with different Cu loadings by hydrothermal method. The photocatalytic activity of S-TiO2 and copper loaded S-TiO2 nanocatalyst were determined for degradation of phenol into hydrocarbons (methane, ethene, and propene) and photo reduction of CO2 into ethanol. The activity results revealed that degradation of phenol and photoreduction of CO2 increased with increasing copper loadings. Hamadanian et al. [13[13] HAMADANIAN, M., REISI-VANANI, A., MAJEDI, A., "Synthesis, characterization and effect of calcination temperature on phase transformation and photocatalytic activity of Cu,S-codoped TiO2 nanoparticles", Applied Surface Science, n. 256, pp. 1837-1844, 2010.] synthesized Cu/S-TiO2 by sol-gel method using titanium(IV) isopropoxide, CuCl2·2H2O and thiourea as precursors. The photocatalytic activity of samples was tested for degradation of methyl orange solutions. The results indicated that the Cu/S-TiO2 had higher activity than un-doped and Cu or S doped TiO2 catalysts.

As mentioned above, although Cu/S-TiO2 photocatalysts were reported in previous works [7[7] YAN, C.Y., YI, W.T., YUAN, H.M., et al., "A highly photoactive S,Cu-codoped nano-TiO2 photocatalyst: Synthesis and characterization for enhanced photocatalytic degradation of neutral red", Environmental Progress & Sustainable Energy, v.33, n. 2, pp. 419-429, 2015.

[8] YI, W.T., YAN, C.Y., YAN, P., et al., "A new perspective for effect of S and Cu on the photocatalytic activity of S,Cu-codoped nano-TiO2 under visible light irradiation", Journal of Sol-Gel Science and Technology, v. 69, n. 2, pp. 386-396, 2014.

[9] ZHANG, W.Y., WANG, S.J., LI, J.G., et al., "Synthesis of Cu/S-TiO2 photocatalysts for hydrogen generation", Materials Research Innovation, v. 17, n. Supplement 1, pp. 3-6, 2013.

[10] LI, F.F., WANG, Z., YANG, C., et al., "Preparation of Cu/S-TiO2 photocatalysts and their catalytic activities under visible light", Journal of Molecular Catalysis (China), v. 26, n. 2, pp. 174-183, 2012.

[11] WANG, Z., LI, F.F., YANG, C., et al., "Photocatalytic reduction of CO2 using Cu/S-TiO2 prepared by electroless plating method", Advanced Materials Research, v. 233-235, pp. 589-595, 2011.

[12] HUSSAIN, S.T., MAZHAR, M., SIDDIQA, A., et al., "Cu-S coped TiO2 nanophotocatalyst for the degradation of environmental and industrial pollutant", The Open Catalysis Journal, n. 5, pp. 21-30, 2012.
-13[13] HAMADANIAN, M., REISI-VANANI, A., MAJEDI, A., "Synthesis, characterization and effect of calcination temperature on phase transformation and photocatalytic activity of Cu,S-codoped TiO2 nanoparticles", Applied Surface Science, n. 256, pp. 1837-1844, 2010.], the authors only measured the physical and chemical properties using modern technologies without theoretical calculation analysis. Therefore, we calculated the related electronic properties of Cu/S-TiO2 in this paper and the results were discussed, aiming at providing some basic insight of the photocatalytic activity enhancement for the experimental researches. Because there have been a lot of works focused on the calculations of pristine, single Cu or S doped anatase TiO2 [4[4] ZHENG, S.K., WU, G.H., LIU, L. "First-principles calculations of P-doped anatase TiO2", Acta Physica Sinica, v. 62, n. 4, pp. 043102, 2013.,14[14] GUO, M.L., J DU, L., "First-principles study of electronic structures and optical properties of Cu, Ag, and Au-doped anatase TiO2", Physica B: Condensed Matter, v. 407, n. 6, pp. 1003-1007, 2012.,15[15] ZENG, W., LIU, Q.J., LIU, Z.T. "Structural, electronic and optical properties of S-doped anatase TiO2", Applied Mechanics and Materials, v. 727-728, pp. 79-82, 2015.], so we will not discuss the single element Cu or S doped TiO2 in this paper. We just concentrate on the electronic structures of Cu and S co-doped TiO2.

2. MATERIALS AND METHODS

Previous works [7[7] YAN, C.Y., YI, W.T., YUAN, H.M., et al., "A highly photoactive S,Cu-codoped nano-TiO2 photocatalyst: Synthesis and characterization for enhanced photocatalytic degradation of neutral red", Environmental Progress & Sustainable Energy, v.33, n. 2, pp. 419-429, 2015.

[8] YI, W.T., YAN, C.Y., YAN, P., et al., "A new perspective for effect of S and Cu on the photocatalytic activity of S,Cu-codoped nano-TiO2 under visible light irradiation", Journal of Sol-Gel Science and Technology, v. 69, n. 2, pp. 386-396, 2014.

[9] ZHANG, W.Y., WANG, S.J., LI, J.G., et al., "Synthesis of Cu/S-TiO2 photocatalysts for hydrogen generation", Materials Research Innovation, v. 17, n. Supplement 1, pp. 3-6, 2013.

[10] LI, F.F., WANG, Z., YANG, C., et al., "Preparation of Cu/S-TiO2 photocatalysts and their catalytic activities under visible light", Journal of Molecular Catalysis (China), v. 26, n. 2, pp. 174-183, 2012.

[11] WANG, Z., LI, F.F., YANG, C., et al., "Photocatalytic reduction of CO2 using Cu/S-TiO2 prepared by electroless plating method", Advanced Materials Research, v. 233-235, pp. 589-595, 2011.

[12] HUSSAIN, S.T., MAZHAR, M., SIDDIQA, A., et al., "Cu-S coped TiO2 nanophotocatalyst for the degradation of environmental and industrial pollutant", The Open Catalysis Journal, n. 5, pp. 21-30, 2012.
-13[13] HAMADANIAN, M., REISI-VANANI, A., MAJEDI, A., "Synthesis, characterization and effect of calcination temperature on phase transformation and photocatalytic activity of Cu,S-codoped TiO2 nanoparticles", Applied Surface Science, n. 256, pp. 1837-1844, 2010.] reported that Cu/S-TiO2 was in the form of anatase phase. Therefore, a 108 anatase TiO2 supercell was built to perform the calculations. As the experimental results indicated that Cu was in the form of cationic ion [6[6] ZHU, X.H., LIU, J.M. "First principles calculations of electronic and optical properties of Mo and C co-doped anatase TiO2", Applied Physics A, v. 117, n. 2, pp. 831-839, 2014.

[7] YAN, C.Y., YI, W.T., YUAN, H.M., et al., "A highly photoactive S,Cu-codoped nano-TiO2 photocatalyst: Synthesis and characterization for enhanced photocatalytic degradation of neutral red", Environmental Progress & Sustainable Energy, v.33, n. 2, pp. 419-429, 2015.

[8] YI, W.T., YAN, C.Y., YAN, P., et al., "A new perspective for effect of S and Cu on the photocatalytic activity of S,Cu-codoped nano-TiO2 under visible light irradiation", Journal of Sol-Gel Science and Technology, v. 69, n. 2, pp. 386-396, 2014.

[9] ZHANG, W.Y., WANG, S.J., LI, J.G., et al., "Synthesis of Cu/S-TiO2 photocatalysts for hydrogen generation", Materials Research Innovation, v. 17, n. Supplement 1, pp. 3-6, 2013.

[10] LI, F.F., WANG, Z., YANG, C., et al., "Preparation of Cu/S-TiO2 photocatalysts and their catalytic activities under visible light", Journal of Molecular Catalysis (China), v. 26, n. 2, pp. 174-183, 2012.

[11] WANG, Z., LI, F.F., YANG, C., et al., "Photocatalytic reduction of CO2 using Cu/S-TiO2 prepared by electroless plating method", Advanced Materials Research, v. 233-235, pp. 589-595, 2011.

[12] HUSSAIN, S.T., MAZHAR, M., SIDDIQA, A., et al., "Cu-S coped TiO2 nanophotocatalyst for the degradation of environmental and industrial pollutant", The Open Catalysis Journal, n. 5, pp. 21-30, 2012.
-13[13] HAMADANIAN, M., REISI-VANANI, A., MAJEDI, A., "Synthesis, characterization and effect of calcination temperature on phase transformation and photocatalytic activity of Cu,S-codoped TiO2 nanoparticles", Applied Surface Science, n. 256, pp. 1837-1844, 2010.], and S was in the form of anionic [12[12] HUSSAIN, S.T., MAZHAR, M., SIDDIQA, A., et al., "Cu-S coped TiO2 nanophotocatalyst for the degradation of environmental and industrial pollutant", The Open Catalysis Journal, n. 5, pp. 21-30, 2012., 13[13] HAMADANIAN, M., REISI-VANANI, A., MAJEDI, A., "Synthesis, characterization and effect of calcination temperature on phase transformation and photocatalytic activity of Cu,S-codoped TiO2 nanoparticles", Applied Surface Science, n. 256, pp. 1837-1844, 2010.] or cationic [8[8] YI, W.T., YAN, C.Y., YAN, P., et al., "A new perspective for effect of S and Cu on the photocatalytic activity of S,Cu-codoped nano-TiO2 under visible light irradiation", Journal of Sol-Gel Science and Technology, v. 69, n. 2, pp. 386-396, 2014., 9[9] ZHANG, W.Y., WANG, S.J., LI, J.G., et al., "Synthesis of Cu/S-TiO2 photocatalysts for hydrogen generation", Materials Research Innovation, v. 17, n. Supplement 1, pp. 3-6, 2013.,13[13] HAMADANIAN, M., REISI-VANANI, A., MAJEDI, A., "Synthesis, characterization and effect of calcination temperature on phase transformation and photocatalytic activity of Cu,S-codoped TiO2 nanoparticles", Applied Surface Science, n. 256, pp. 1837-1844, 2010.] ion, so we built two models: Cu cation and S anion co-doped TiO2 (Cu-S/TiO2), Cu cation and S cation co-doped TiO2 (Cu+S/TiO2). As shown in Fig.1, the central Ti atom was substituted by one Cu atom, and Cu-S/TiO2 and Cu+S/TiO2 models were obtained when one O atom (marked as S1) or one Ti atom (marked as S2) was substituted by one S atom.

Figure 1:
Structural model of Cu/S co-doped TiO2

All calculations were performed using CASTEP [16[16] CLARK, S. J., SEGALL, M. D., PICKARD, C. J., et al., "First principles methods using CASTEP", Zeitschrift für Kristallographie, v. 220, n. 5-6, pp. 567-570, 2005.] software. The exchange-correlation function is Perdew-Burke-Ernzerhof. The interaction between valence electrons and the ionic core is described by ultrasoft pseudopotential. The valence electrons configurations are Ti: 3s23p63d24s2, O: 2s22p4 and S: 3s23p4. The cut-off energy of plane wave basis is set as 300eV. The convergence threshold for the maximum energy change, maximum force, maximum stress and displacement tolerances are set as 2.0×10-5eV/atom, 0.05eV/Å, 0.1GPa and 0.002Å, respectively. The special points sampling integration over the Brillouin zone is carried out using the Monkhorst-Pack method with a 2×2×2 special-point mesh.

3. RESULTS AND DISCUSSION

The calculated structural parameters are listed in table 1. Compared with the pristine TiO2, the volumes of Cu-S/TiO2 and Cu+S/TiO2 increased about 1.3% and 1.1%, respectively. This result means that S anion can induce more lattice distortion than S cation. Usually, lattice distortion always results in inner electronic field which can facilitate the separation of electron-hole pairs in the crystal, and thereby enhance the photocatalytic activity of TiO2. The calculated results of the lattice distortion are in consistent with the photocatalytic activity improvement of Cu and S co-doped TiO2 obtained from the experimental researches [7[7] YAN, C.Y., YI, W.T., YUAN, H.M., et al., "A highly photoactive S,Cu-codoped nano-TiO2 photocatalyst: Synthesis and characterization for enhanced photocatalytic degradation of neutral red", Environmental Progress & Sustainable Energy, v.33, n. 2, pp. 419-429, 2015.

[8] YI, W.T., YAN, C.Y., YAN, P., et al., "A new perspective for effect of S and Cu on the photocatalytic activity of S,Cu-codoped nano-TiO2 under visible light irradiation", Journal of Sol-Gel Science and Technology, v. 69, n. 2, pp. 386-396, 2014.

[9] ZHANG, W.Y., WANG, S.J., LI, J.G., et al., "Synthesis of Cu/S-TiO2 photocatalysts for hydrogen generation", Materials Research Innovation, v. 17, n. Supplement 1, pp. 3-6, 2013.

[10] LI, F.F., WANG, Z., YANG, C., et al., "Preparation of Cu/S-TiO2 photocatalysts and their catalytic activities under visible light", Journal of Molecular Catalysis (China), v. 26, n. 2, pp. 174-183, 2012.

[11] WANG, Z., LI, F.F., YANG, C., et al., "Photocatalytic reduction of CO2 using Cu/S-TiO2 prepared by electroless plating method", Advanced Materials Research, v. 233-235, pp. 589-595, 2011.

[12] HUSSAIN, S.T., MAZHAR, M., SIDDIQA, A., et al., "Cu-S coped TiO2 nanophotocatalyst for the degradation of environmental and industrial pollutant", The Open Catalysis Journal, n. 5, pp. 21-30, 2012.
-13[13] HAMADANIAN, M., REISI-VANANI, A., MAJEDI, A., "Synthesis, characterization and effect of calcination temperature on phase transformation and photocatalytic activity of Cu,S-codoped TiO2 nanoparticles", Applied Surface Science, n. 256, pp. 1837-1844, 2010.].

Table 1:
Structural parameters for different TiO2 systems

Although Cu and S co-doping induces lattice distortion of TiO2, the crystal phase of Cu-S/TiO2 and Cu+S/TiO2 keep unchanged, as shown in Fig.2. The calculated X-ray diffraction (XRD) pattern of pristine TiO2 is in the form of anatase. The XRD peaks of Cu-S/TiO2 and Cu+S/TiO2 are similar to those of pristine TiO2, which indicates the crystal phases of Cu-S/TiO2 and Cu+S/TiO2 are anatase. Because of the lattice distortion caused by the Cu and S co-doping, some XRD peak positions of Cu-S/TiO2 and Cu+S/TiO2 shift a little when compared with those of TiO2. Some peaks of the Cu-S/TiO2 and Cu+S/TiO2 show splitting in the graph, which also can be caused by the lattice distortion. This is in consistent with the calculated structural parameters. The lattice constants a, b and c of Cu-S/TiO2 and Cu+S/TiO2 are different to those of pristine TiO2.

Figure 2:
XRD patterns of different TiO2 systems

The calculated energy band structures of Cu-S/TiO2 and Cu+S/TiO2 are shown in Fig.3. When the calculations were performed, the highest energy level occupied by electrons was set as the energy zero point. The band gaps of Cu-S/TiO2 and Cu+S/TiO2 are 2.43eV and 2.30eV, respectively. This means the Cu and S co-doping increase the band gap of TiO2, as the calculated band gap of pristine TiO2 is 2.20eV [4[4] ZHENG, S.K., WU, G.H., LIU, L. "First-principles calculations of P-doped anatase TiO2", Acta Physica Sinica, v. 62, n. 4, pp. 043102, 2013.]. As the experimental band gap of anatase is 3.2 eV [17[17] YIN, W.J., CHEN, S., YANG, J.H., et al., "Effective band gap narrowing of anatase TiO2 by strain along a soft crystal direction", Applied Physics Letters, v. 96, n. 22, pp. 221901, 2010. ], the smaller value calculated by DFT can be assigned to the GGA band gap underestimation. For a qualitative discuss, this underestimation will not affect the final conclusion. Four impurity energy levels (marked as 0, 1, 2, 3 in the figure) appear in the forbidden band of Cu-S/TiO2 and Cu+S/TiO2. The electrons in the valence band can be excited to the impurity energy levels and then transit to the conduction band, thereby reducing the photon energy needed for exciting the electrons. The impurity energy levels also can be the trap center for electrons and prolong the lifetime of electron-hole pairs, inhibiting the recombination of electrons and holes, and then the photocatalytic activity can be enhanced in the doped TiO2 systems.

Figure 3:
Band structures of (a) Cu-S/TiO2, (b) Cu+S/TiO2

Density function theory can be used to calculated the related electronic structures of many metal oxide semiconductors [18[18] GU, G.X., XIANG, G., LUO, J., et al., "Magnetism in transition-metal-doped ZnO: A first-principles study", Journal of Applied Physics, v. 112, n. 2, pp. 023913, 2012.,19[19] GU, G.X., XIANG, G., LAN, M., et al., "Electric-field-induced magnetism of first-row d0 semiconductor nanowires and nanotubes", Physica Status Solidi (b), v. 252, n. 3, pp. 484-489, 2015.]. In order to know the component of the impurity energy levels in the forbidden band of Cu-S/TiO2 and Cu+S/TiO2, the partial density of states (PDOS) were calculated using the first-principles calculations based on the density functional theory, as shown in Fig. 4. For Cu-S/TiO2, it is very clear that the impurity energy level at 0 eV is mainly composed of Cu 3d, S 3p and O 2p orbital. The impurity energy levels marked as "1" and "2" in Fig.3 (a) are the hybridization of Ti 3d, O 2p and S 3p orbital. The impurity energy level marked as "3" is mainly originated from Cu 3d orbital. The valence band of Cu-S/TiO2 is the contribution of Ti 3d, O 2p, Cu 3d and S 3p orbital. Cu 3d and S 3p orbital almost have no effect on the conduction band. The conduction band is still composed of Ti 3d orbital, just like the pristine TiO2 [4[4] ZHENG, S.K., WU, G.H., LIU, L. "First-principles calculations of P-doped anatase TiO2", Acta Physica Sinica, v. 62, n. 4, pp. 043102, 2013.]. For Cu+S/TiO2, the impurity energy level at 0 eV is only composed of Cu 3d orbital, which is different to the Cu-S/TiO2. The impurity energy levels marked as "1" and "2" is the contribution of Cu 3d and O 2p orbital. The impurity energy level marked as "3" is originated from Cu 3d, Ti 3d and O 2p orbital. In Fig.4 (b), the S 3p orbital almost has no contribution to the valence band. Comparing Fig.4 (a) with Fig. 4 (b), it is obvious that S cation and S anion have very different effects to the impurity energy levels and valence band. S anion provides significant contributions to the impurity energy levels in the forbidden band and the valence band. But S cation has almost no contribution to the range of -7~2eV.

Figure 4:
PDOS of (a) Cu-S/TiO2, (b) Cu+S/TiO2

Above all, the photocatalytic activity enhancement of TiO2 by Cu and S co-doping reported in the experimental researches can be explained as follow: the electrons in the impurity energy band can transit to the conduction band and leave holes staying in the impurity energy levels. Then the electrons in the valence band can transit to the impurity energy level and continue to transit to the conduction band under suitable photon's irradiation. This process is an additional transition way for the electrons except those electrons transiting directly from the valence band to the conduction band. So the photocatalytic activity of TiO2 co-doped with Cu and S is improved. At the same time, Cu and S Co-doping also provide a synergistic effect on the photocatalytic activity of TiO2. From Fig. 3 it also can be seen that the Cu 3d orbital plays an important role to the doped TiO2 during the photocatalytic process, because Cu 3d orbital provides contribution to the impurity energy levels in both Cu-S/TiO2 and Cu+S/TiO2.

4. CONCLUSIONS

The electronic structures of Cu and S co-doped anatase TiO2 were calculated by the first-principles based on density function theory. Cu and S co-doping can result in the lattice distortion of TiO2 with increased volume. The XRD patterns indicate that after co-doping, the crystal structure of co-doped TiO2 remains similar to anatase. There are four impurity energy levels in the forbidden band of Cu and S co-doped TiO2. The Cu 3d orbital may play an important role in the photocatalytic process. S cation and S anion have different contributions to the valence band and the impurity energy levels.

5. ACKNOWLEDGMENTS

The authors would like to express highly appreciation to Professor Baoting Liu at Hebei University for providing the CASTEP software and discussing the calculated results. This work is supported by the China Scholarship Council ( [2014]-3012).

BIBLIOGRAPHY

  • [1]
    SAHOO, C., GUPTA, A.K. "Characterization and photocatalytic performance evaluation of various metal ion-doped microstructured TiO2 under UV and visible light", Journal of Environmental Science and Health, Part A, v. 50, n. 7, pp. 659-668, 2015.
  • [2]
    VU, T.A., DAO, C.D., HOANG, T.T., et al., "Study on photocatalytic activity of TiO2 and non-metal doped TiO2 in Rhodamine B degradation under visible light irradiation", International Journal of Nanotechnology, v. 10, n. 3-4, 235-246, 2013.
  • [3]
    KHAN, M., GUL, S.R., LI, J., et al., "Preparation, characterization and visible light photocatalytic activity of silver, nitrogen co-doped TiO2 photocatalyst", Materials Research Express, v. 2, n. 6, pp. 066201, 2015.
  • [4]
    ZHENG, S.K., WU, G.H., LIU, L. "First-principles calculations of P-doped anatase TiO2", Acta Physica Sinica, v. 62, n. 4, pp. 043102, 2013.
  • [5]
    WU, G.H., ZHENG, S.K., LV, X. "First-principles calculation of bi-doped anatase TiO2", Chinese Journal of Inorganic Chemistry, v. 29, n. 1, pp. 9-14, 2013.
  • [6]
    ZHU, X.H., LIU, J.M. "First principles calculations of electronic and optical properties of Mo and C co-doped anatase TiO2", Applied Physics A, v. 117, n. 2, pp. 831-839, 2014.
  • [7]
    YAN, C.Y., YI, W.T., YUAN, H.M., et al., "A highly photoactive S,Cu-codoped nano-TiO2 photocatalyst: Synthesis and characterization for enhanced photocatalytic degradation of neutral red", Environmental Progress & Sustainable Energy, v.33, n. 2, pp. 419-429, 2015.
  • [8]
    YI, W.T., YAN, C.Y., YAN, P., et al., "A new perspective for effect of S and Cu on the photocatalytic activity of S,Cu-codoped nano-TiO2 under visible light irradiation", Journal of Sol-Gel Science and Technology, v. 69, n. 2, pp. 386-396, 2014.
  • [9]
    ZHANG, W.Y., WANG, S.J., LI, J.G., et al., "Synthesis of Cu/S-TiO2 photocatalysts for hydrogen generation", Materials Research Innovation, v. 17, n. Supplement 1, pp. 3-6, 2013.
  • [10]
    LI, F.F., WANG, Z., YANG, C., et al., "Preparation of Cu/S-TiO2 photocatalysts and their catalytic activities under visible light", Journal of Molecular Catalysis (China), v. 26, n. 2, pp. 174-183, 2012.
  • [11]
    WANG, Z., LI, F.F., YANG, C., et al., "Photocatalytic reduction of CO2 using Cu/S-TiO2 prepared by electroless plating method", Advanced Materials Research, v. 233-235, pp. 589-595, 2011.
  • [12]
    HUSSAIN, S.T., MAZHAR, M., SIDDIQA, A., et al., "Cu-S coped TiO2 nanophotocatalyst for the degradation of environmental and industrial pollutant", The Open Catalysis Journal, n. 5, pp. 21-30, 2012.
  • [13]
    HAMADANIAN, M., REISI-VANANI, A., MAJEDI, A., "Synthesis, characterization and effect of calcination temperature on phase transformation and photocatalytic activity of Cu,S-codoped TiO2 nanoparticles", Applied Surface Science, n. 256, pp. 1837-1844, 2010.
  • [14]
    GUO, M.L., J DU, L., "First-principles study of electronic structures and optical properties of Cu, Ag, and Au-doped anatase TiO2", Physica B: Condensed Matter, v. 407, n. 6, pp. 1003-1007, 2012.
  • [15]
    ZENG, W., LIU, Q.J., LIU, Z.T. "Structural, electronic and optical properties of S-doped anatase TiO2", Applied Mechanics and Materials, v. 727-728, pp. 79-82, 2015.
  • [16]
    CLARK, S. J., SEGALL, M. D., PICKARD, C. J., et al., "First principles methods using CASTEP", Zeitschrift für Kristallographie, v. 220, n. 5-6, pp. 567-570, 2005.
  • [17]
    YIN, W.J., CHEN, S., YANG, J.H., et al., "Effective band gap narrowing of anatase TiO2 by strain along a soft crystal direction", Applied Physics Letters, v. 96, n. 22, pp. 221901, 2010.
  • [18]
    GU, G.X., XIANG, G., LUO, J., et al., "Magnetism in transition-metal-doped ZnO: A first-principles study", Journal of Applied Physics, v. 112, n. 2, pp. 023913, 2012.
  • [19]
    GU, G.X., XIANG, G., LAN, M., et al., "Electric-field-induced magnetism of first-row d0 semiconductor nanowires and nanotubes", Physica Status Solidi (b), v. 252, n. 3, pp. 484-489, 2015.

Publication Dates

  • Publication in this collection
    Sept 2016

History

  • Received
    10 Sept 2015
  • Accepted
    01 Apr 2016
Laboratório de Hidrogênio, Coppe - Universidade Federal do Rio de Janeiro, em cooperação com a Associação Brasileira do Hidrogênio, ABH2 Av. Moniz Aragão, 207, 21941-594, Rio de Janeiro, RJ, Brasil, Tel: +55 (21) 3938-8791 - Rio de Janeiro - RJ - Brazil
E-mail: revmateria@gmail.com