Chemical modification of Aspergillus nigerβ-glucosidase and its catalytic properties

Abstract

Aspergillus niger β-glucosidase was modified by covalent coupling to periodate activated polysaccharides (glycosylation). The conjugated enzyme to activated starch showed the highest specific activity (128.5 U/mg protein). Compared to the native enzyme, the conjugated form exhibited: a higher optimal reaction temperature, a lower Ea (activation energy), a higher K_m (Michaelis constant) and Vmax (maximal reaction rate), and improved thermal stability. The calculated t_1/2 (half-life) values of heat in-activation at 60 °C and 70 °C were 245.7 and 54.5 min respectively, whereas at these temperatures the native enzyme was less stable (t_1/2of 200.0 and 49.5 min respectively). The conjugated enzyme retained 32.3 and 29.7%, respectively from its initial activity in presence of 5 mM Sodium Dodecyl Sulphate (SDS) and p-Chloro Mercuri Benzoate (p-CMB), while the native enzyme showed a remarkable loss of activity (retained activity 1.61 and 13.7%, respectively). The present work has established the potential of glycosylation to enhance the catalytic properties of β-glucosidase enzyme, making this enzyme potentially feasible for biotechnological applications.

β-glucosidases; glycosylation; soluble polysaccharides; enzyme stability

Introduction

β-glucosidases are enzymes that hydrolyze cellulose (β-1,4-glucan or β-D- glucosidic linkages) resulting in the formation of glucose, cellobiose, cellooligosaccharides, and the like (Su et al., 2010; Cai et al., 2012). Efficient hydrolysis of cellulose requires the synergistic activities of three types of enzymes: cellobiohydrolase, endo- β-1,4-glucanase, and β-glucosidase (Chauve et al., 2010; Singh et al., 2011; Cai et al., 2012). β-glucosidase (EC 3.2.1.21), catalyses the final step of cellulose hydrolysis (i.e., the breakdown of cellobiose to glucose). The supplementation of this enzyme to cellulose preparations, in order to obtain higher rates and extent of saccharification of cellulose, has been recommended (Wood and Wiseman, 1982). Cellulases have a great application prospect in many fields, such as medicine, textile, chemical engineering, paper engineering, food and fermentation industries, commercial detergents, tobacco, waste water treatment, feed additives etc. (Howard et al., 2003; Su et al., 2010). The application of cellulase has very important significance in solving problems related with raw materials in industry and agriculture, the energy crisis, and environmental pollution and so on (Cai et al., 2012). An efficient cellulose hydrolysis requires a stable β-glucosidase for the utilization of abundant cellulosic waste material on an industrial scale (Rashid and Siddiqui, 1996). There are several major and principally different routes to obtain cellulases with improved stability properties to date: (a) by selecting organisms living in appropriate extreme environments (Huang et al., 2005; Kubartova et al., 2007), (b) by gene recombination and genetic engineering (Liu et al., 2006; Kim et al., 2007), (c) by immobilization (Sinegania et al., 2005; Singh et al., 2011), and (d) by chemical modification (Yang et al., 2009; Cai et al., 2012). Chemical modification is the process of covalent attachment of special groups of modifiers to the side-chain group of certain amino-acid residues in the enzyme. There are few reports about stabilization of β-glucosidase by covalent coupling to soluble polysaccharides (Rashid and Siddiqui, 1998; Abdel-Naby, 1999).

In the present study, Aspergillus niger β-glucosidase was covalently immobilized on to water soluble carrier (polysaccharides). The catalytic properties and the stability of modified enzyme have been compared to those of native enzyme.

Materials and Methods

Microorganism

Aspergillus niger strain was obtained from the Center of Culture Collection of National Research Center, Cairo, Egypt, and sub-cultured every 3 weeks and stored at 4 °C in PDA slants.

Enzyme production

For inoculum preparation, spores from A.niger were produced on PDA slants for 5 days at 30 °C. One mL of spore suspension (6 × 10¹⁰spores) was then inoculated in 250 mL-Erlenmeyer flasks containing 50 mL production medium. The production medium was prepared from a mixture of 3 g NH₄Cl, 17 g citric acid, 3 g KH₂PO₄, 0.5 g MgSO₄.7H₂O, 0.5 g CaCl₂, 0.2 mL triton and 10 mL milk whey, in 1000 mL wheat bran extract (1% w/v) with pH adjusted to 7.0. The flasks were shaken at 150 rpm and 30 °C for 7 days. The culture was filtered through cloth to remove the mycelia. The crude supernatant was used for enzyme modification.

Oxidation of carbohydrate used for the modification

Agar, dextran A (200 × 10³–275 × 10³), dextran 70 × 10³, glucomannan, galactomannan, pectin and soluble starch were used in the present study, all were obtained from Sigma. Activation of polysaccharide was done according to Ben Ammar et al. (2002) with some modification as follows: 1 g of each polysaccharide was dissolved into 40 mL of 0.25 M periodate solution and gently shaked at 50 rpm at 37 °C for 6 h. After that, 1.2 mL of ethylene glycol were added and allowed to react for 1 h. The reaction mixture was dialyzed against water at 4 °C for 2 h then lyophilized.

Covalent coupling of β-glucosidase to activated polysaccharide

Forty units of enzyme and 150 mg oxidized polysaccharide were combined in citrate buffer pH 4.8. The mixture was allowed to stand at 4 °C overnight. Modified β-glucosidase was precipitated with 90% acetone, centrifuged at 4 °C and 3000 rpm for 15 min, the precipate was dried and used as modified enzyme.

Enzymatic assay

β-glucosidase activity was determined according to Abdel-Naby (1999) using 0.4% (w/v) cellobiose solution in citrate buffer (0.05 M, pH 4.8). The glucose released was determined by glucose oxidase/peroxidase reagent. One unit (U) of enzyme activity was defined as the amount of enzyme required to release 1 μmol of glucose per minute under assay conditions.

Protein determination

Protein contents of enzyme were estimated by method of Lowry et al. (1951).

Thermal stability

Both native and conjugated β-glucosidase were held at different temperatures (40–70 °C) for 2 h before activity assay, with samples being drawn for the assay at 15-min intervals.

pH stability

The pH stability was examined by measuring the residual activity of the enzyme after incubation at 0.05 M buffer with different pHs using citrate buffer (pH 2.5–6.0), citrate phosphate buffer (pH 6.5–7.5), and phosphate buffer (pH 7.5–8.0).

Results and Discussion

The variation of activity obtained for glycosylated β-glucosidase was affected by the types of modifiers and the molecular weight of carbohydrate residue linked to the enzyme (Figure 1). Among all preparations tested, the enzyme coupled to activated soluble starch showed higher specific activity (128.5 U/mg protein) than the native enzyme (29.6 U mg/protein). This result was due to the conjugation to the active protein in crude enzyme preparation. It is clear from the results that the crude enzyme contains a variety of proteins in addition to the β-glucosidase. Similar result was obtained by Singh et al. (2011) on immobilized β-1,4-glucosidase onto functionalized silicon oxide nanoparticles.

Figure 1

Covalent coupling of Aspergillus niger β-glucosidase to periodate activated polysaccharides.

Properties of native and starch conjugated cellobiase

Optimum temperature

The activities of native and conjugated enzymes were assayed at various temperatures (30–75 °C). The native enzyme had an optimum temperature of 40 °C, whereas that of the conjugated enzyme was shifted to 50 °C. The increase of the optimum temperature is probably a consequence of enhanced thermal stability. Similar result was reported for other glycosylated cellobiases (Abdel-Naby, 1999). The temperature data were replotted in the form of Arrhenius plot (Figure 2) which is related to the activation energy (Ea) by the relationship: Slope= Ea/2.303 R, where R is the gas constant. Activation energy for both native and conjugated enzymes was 4.55 and 3.87 cal/mol, respectively. Rashid and Siddiqui (1996) reported that polysaccharide-β-glucosidase had lower Ea (55 kJ/mol) as compared with the native form (61 kJ/mol).

Figure 2

Arrhenius plots for the native and starch conjugated Aspergillus niger β-glucosidase.

Optimum pH

Optimum pH of the native and modified β-glucosidase was studied using 0.05 M of different buffers with different pH values. Both native and modified enzymes were optimally active at pH 4.0 (Figure 3). This means that the ionization of the amino acid residues at the active site remained unaffected by the glycosylation process. Abdel-Naby (1999) found that there was no change of the pH optimum for the activity of the native and glycosylated cellobiase.

Figure 3

Optimum pH of native and starch conjugated Aspergillus niger β-glucosidase.

Thermal stability

The rates of heat inactivation of the native and conjugated β-glucosidase were presented in Figure 4A. Covalent coupling of β-glucosidase to activated starch appeared to enhance its thermal stability as shown total activity of the conjugated enzyme which was retained after 2 h of heating at 55 °C, while the native enzyme lost about 11% of its initial activity. This is probably because the formation of multiple covalent bonds between the β-glucosidase and polysaccharide reduces conformational flexibility and thermal vibrations, thus preventing the conjugated protein from unfolding and denaturing (Wong et al., 2009; Singh et al., 2011). Wongkhalaung et al.(1985) reported that cellulase conjugated to soluble polymer retained all initial activity after heating at 60 °C for 20 min, while the native cellulase lost about 18% of its activity at the same condition. For example, the calculated half-life (t_1/2) value shows that the heat inactivation of conjugated enzyme at 65 °C was 67.2 min whereas at the same temperature the native was less stable (t_1/2 55.3 min). Glycosylation of β-glucosidase protected the enzyme against heat in-activation as its half-life for thermal deactivation was increased. Conjugation to polysaccharide induced stability of modified proteins by rigidification of the conformation, which could retain its denaturation (Bund and Singhal, 2002). On the other hand, Srivastava (1991) argued that the hydration effect of the attached carbohydrate may be responsible for improving the stability of conjugated enzymes. Hydrogen binding between the polysaccharide and protein surface as well as intra molecular cross links between protein and polysaccharide has been suggested as causes of thermal stabilization (Zhang et al., 2009).

Figure 4

Thermal stability (A) and pH stability (B) of native and starch conjugated Aspergillus niger β-glucosidase.

pH stability

The stability of the conjugated β-glucosidase at various pH values was higher than that of the native enzyme (Figure 4B). At pH 3.0 and 8.0 after 30 min the residual activity of the conjugated enzyme was 86.4 and 44.3% which was higher than that of the native enzyme (70.1 and 36.0%, respectively). In general, the glycosylated enzyme was more resistant to acid or alkaline pH values. In contrast, Abdel-Naby (1999) reported that no change of pH stability of cellobiase after glycosylation process.

Kinetics of native and conjugated cellobiase

According to the Michaelis-Menton kinetics, the v_max (maximum reaction rate) and k_m (Michaelis constant) of enzymes are determined at optimum assay conditions. Lineweaver-Burk plots of the native and conjugated β-glucosidase (Figure not shown) gave k_m of 40 mM and 46.5 mM, respectively. With cellobiose, the v_max of the native and conjugated enzyme were 416.7 and 1111.0 U/mg protein, respectively. Increasing the k_m value after glycosylation is most likely a consequence of conformational changes in the enzyme introduced by the glycosylation procedure which renders its active site less accessible to the substrate. In contrast Zhang et al. (2009)reported that k_m of modified cellulase is smaller than that of natural cellulase. It illustrates that the affinity of the modified form for the substrate is larger than that of the natural form. The specific activity of conjugated β-glucosidase is higher than that of the native enzyme, consequently, v_max of modified enzyme is higher than that of native enzyme. Rashid and Siddiqui (1998) found that no significant difference could be detected in the specificity constant (k_m and v_max) between free and glycosylated β-glucosidase.

Effect of various metal ions

In this experiment, both the native and conjugated β-glucosidase were incubated with the tested metal (5 mM) at 30 °C for 60 min before mixing with the substrate. The results listed in (Figure 5) indicated that the inhibitory effect of the investigated metal ions was less pronounced with the conjugated enzyme as compared to the native enzyme. This may be due to the protection of the enzyme by immobilization. In presence of Sodium Dodecyl Sulphate (SDS) the conjugated β-glucosidase retained 32.3% from its initial activity, while the native enzyme showed a remarkable loss of activity (retained activity 1.61%). The native enzyme lost 13.8 and 34.4% of its initial activity in presence of ZnCl₂ and Iodo Aceto Amide (IAA). However, under the same conditions, the conjugated β-glucosidase was more stable with retained activity of 113.3 and 80.3%, respectively. The higher recovered activity of the conjugated form after treatment with chemicals compared to the native enzyme could be attributed to the hydrophilic nature of the polysaccharide attached to it (Srivastava, 1991). Perutz (1978) reported that protein hydration may have a positive effect on stability.

Figure 5

Effect of metal salts and inhibitors on the activity of native and starch conjugated Aspergillus niger β-glucosidase. EDTA (Ethylene Diamine Tetra Acetic Acid), SDS (Sodium Dodecyl Sulphate), IAA (Indo Aceto Amide), p-CMB (p-Chloro Mercuri Benzoate).

Conclusion

There are few reports about modification of the β-glucosidase enzyme by conjugation to soluble polysaccharides (glycosylation). To our knowledge, this study produced stabilized (modified) β-glucosidase by covalent coupling to activated polysaccharides. Starch is safe, cheap, readily available on the markets and suitable for industrial application. The glycosylation process improved Aspergillus niger β-glucosidase stabilities toward temperature, pH, inhibitors which make it more suitable for industrial applications.

References

• Abdel-Naby MA (1999) Stabilization of cellobiase by covalent coupling to soluble polysaccharide. Microbiol Res 154:213–218.
• Ben Ammar Y, Motsubara T, Ito K et al. (2002) Some properties of levansucrase of Bacillus natto stabilized with periodate oxidized yeast glucomannan. Enz Microb Technol 30:875–882.
• Bund RK, Singhal RS (2002) Chemical modification of cellulase by malei anhydride an N-bromosuccinimide for improved detergent stability. J Surfact Deterg 5:1–4.
• Cai F, Xie Y, He X et al. (2012) Chemical modification of β-endoglucanase from Trichoderma viridin by methanol and determination of its catalytic functional groups. Afr J Biotechnol 11:8264–8274.
• Chauve M, Mathis H, Hue D et al. (2010) Comparative kinetic analysis of two fungal beta-glucosidases. Biotechnol Biofuels 3:3–8.
• Howard RL, Abotsi E, Jansen VRE et al. (2003) Lignocellulose biotechnology: issues of bioconversion and enzyme production. Afr J Biotechnol 2:602–619.
• Huang Y, Krauss G, Cottaz S et al. (2005) A highly acid stable and thermostable endo-beta-glucanase from the thermo acidophilic archaeon Sulfolobus solfataricus Biochem J 385:581–588.
• Kim SJ, Lee CM, Kim MY et al. (2007) Screening and characterization of an enzyme with beta-glucosidase activity from environmental DNA. J Microbiol Biotechnol 17:905–912.
• Kubartova A, Moukoumi J, Beguiristain T et al.(2007) Microbial diversity during cellulose decomposition in different forest stands: I microbial communities and environmental conditions. Microb Ecol 54:393–405.
• Lendewrs JP, Crichton RR (1984) Thermal stabilization of amylolytic enzymes by covalent coupling to soluble polysaccharides. Biotechnol Bioeng 26:1343–1351.
• Liu G, Tang X, Tian SL et al. (2006) Improvement of the cellulolytic activity of Trichoderma reesei endoglucanase IV with an additional catalytic domain. World J Microbiol 22:1301–1305.
• Lowry OH, Rosenbrough NJ, Farr AL et al. (1951) Protein measurement with the folin phenol reagent. J Biol Chem 193:265–275.
• Perutz MF (1978) Electrostatic effects in proteins. Sci 201:1187–1191.
• Rashid MH, Siddiqui KS (1996) The stability of extracellular beta-glucosidase from Aspergillus niger is significantly enhanced by non-covalently attached polysaccharides. Folia Microbiol 41:341–346.
• Rashid MH, Siddiqui KS (1998) Thermodynamic and kinetic study of stability of the native and chemically modified β-glucosidases from Aspergillus niger Proc Biochem 33:109–115.
• Sinegania AS, Emtiazi G, Shariatmadae IH (2005) Sorption and immobilization of cellulase on silicate clay minerals. J Colloid Inter Sci 290:39–44.
• Singh RK, Zhang YEW, Nguyen NPT et al. (2011) Covalent immobilization of β-1,4-glucosidase from Agaricus arvensis onto functionalized silicon oxide nanoparticles. Appl Microbiol Biotechnol 89:337–344.
• Srivastava RAK (1991) Studies on stabilization of amylase by covalent coupling to soluble polysaccharides. Enz Microb Technol 13:164–170.
• Su ZL, Zhang W, Yu ST (2010) Research progress of cellulase activity. J Anhui Agric Sci 38:10490–10491.
• Wong LS, Khan F, Micklefield J (2009) Selective covalent protein immobilization: strategies and applications. Chem Rev 109:4025–4053.
• Wongkhalaung C, Kashiwagi Y, Magae Y et al. (1985) Cellulase immobilization on a soluble polymer. Appl Microbiol Biotechnol 21:37–41.
• Wood J, Wiseman A (1982) Fungal and other β-D-glucosidases-their properties and application. Enz Microb Technol 4:73–79.
• Yang G, Chen HZ, Liu Y (2009) Effect of additives on thermostability of Trichoderma viride JQF-04 cellulase. Chin. J Appl Environ Biol 15:134–138.
• Zhang Y, Tang L, An X et al. (2009) Modification of cellulase and its application to extraction of diosgenin from Dioscorea zingiberensis C.H.Wright. Biochem Engin J 47:80–86.

Publication Dates

• Publication in this collection
  Jan-Mar 2015

History

• Received
  24 Dec 2012
• Accepted
  06 June 2014