ABSTRACT
Portable X-ray fluorescence (pXRF) spectrometry has been useful worldwide for determining soil elemental content under both field and laboratory conditions. However, the field results are influenced by several factors, including soil moisture (M), soil texture (T) and soil organic matter (SOM). Thus, the objective of this work was to create linear mathematical models for conversion of Al2O3, CaO, Fe, K2O, SiO2, V, Ti and Zr contents obtained by pXRF directly in field to those obtained under laboratory conditions, i.e., in air-dried fine earth (ADFE), using M, T and SOM as auxiliary variables, since they influence pXRF results. pXRF analyses in field were performed on 12 soil profiles with different parent materials. From them, 59 samples were collected and also analyzed in the laboratory in ADFE. pXRF field data were used alone or combined to M, T and SOM data as auxiliary variables to create linear regression models to predict pXRF ADFE results. The models accuracy was assessed by the leave-one-out cross-validation method. Except for light-weight elements, field results underestimated the total elemental contents compared with ADFE. Prediction models including T presented higher accuracy to predict Al2O3, SiO2, V, Ti and Zr, while the prediction of Fe and K2O contents was insensitive to the addition of the auxiliary variables. The relative improvement (RI) in the prediction models were greater in predictions of SiO2 (T+SOM: RI=22.29%), V (M+T: RI=18.90%) and Ti (T+SOM: RI=11.18%). This study demonstrates it is possible to correct field pXRF data through linear regression models.
Index terms:
pXRF; soil moisture; soil texture; soil organic matter; prediction models
RESUMO
A espectrometria portátil de fluorescência de raios-X (pXRF) tem sido útil em todo o mundo para determinar o teor dos elementos no solo em condições de campo e de laboratório. No entanto, os resultados obtidos em campo podem ser influenciados por vários fatores, como umidade (U), textura (T) e matéria orgânica do solo (MOS). Assim, o objetivo deste trabalho foi criar modelos matemáticos lineares para a conversão dos teores dos elementos obtidos por pXRF em campo para resultados obtidos em laboratório, i.e., na Terra Fina Seca ao Ar (TFSA), utilizando U, T e MOS como variáveis auxiliares, uma vez que elas influenciam as leituras. As análises com pXRF foram realizadas em 12 perfis de solo com diferentes materiais de origem, seguidas por coleta de 59 amostras. Leituras com pXRF foram realizadas também em laboratório em amostras de TFSA. Os dados de pXRF obtidos em campo foram utilizados sozinhos ou combinados aos dados de U, T e MOS como variáveis auxiliares, para criar modelos de regressão linear para predição dos resultados de pXRF em TFSA. A acurácia dos modelos foi calculada pelo método leave-one-out cross-validation. À exceção de elementos mais leves, as leituras de campo com pXRF subestimaram o teor total dos elementos. Modelos de predição incluindo T apresentaram maior acurácia na predição de Al2O3, SiO2, V, Ti e Zr, enquanto a predição dos teores de Fe e K2O foi insensível à adição das variáveis auxiliares. A melhora relativa (MR) nos modelos de predição foi maior nas predições de SiO2 (T+MOS: MR = 22,29%), V (U+T: MR = 18,90%) e Ti (T+MOS: MR = 11,18%). Este trabalho demonstrou que é possível a correção dos dados de pXRF obtidos em campo através de modelos de regressão linear.
Termos para indexação:
pXRF; umidade do solo; textura do solo; matéria orgânica do solo; modelos de predição.
INTRODUCTION
X-ray fluorescence is a technique capable of providing quantitative data on the content of chemical elements in the analyzed material (Potts; West, 2008POTTS, P. J.; WEST, M. Portable X-ray fluorescence spectrometry: Capabilities for in vitro analysis. Cambridge: Royal Society of Chemistry, 2008. 304p.). This technique has been used in different branches of science, such as geochemistry, archeology, forensic science and soil science (Ribeiro et al., 2017RIBEIRO, B. T. et al. Portable X-ray fluorescence (pXRF) applications in tropical Soil Science . Ciência e Agrotecnologia , 41(3):245-254, 2017. ; Weindorf; Bakr; Zhu, 2014WEINDORF, D. C.; BAKR, N.; ZHU, Y. Advances in portable X-ray fluorescence (PXRF) for environmental, pedological, and agronomic applications. Advances in Agronomy. 128:65-2113, 2014. ). In this technique, a source of energy that emits X-rays hit the atoms of the analyzed material, making electrons to move from inner to outer orbits. Following on, electrons move back to their original orbit emitting energy in the form of fluorescence. Each chemical element emits a characteristic fluorescence when the electron returns to its original orbit, enabling the element identification. The intensity of the fluorescence detected determines the content of that element in the sample (Weindorf; Bakr; Zhu, 2014WEINDORF, D. C.; BAKR, N.; ZHU, Y. Advances in portable X-ray fluorescence (PXRF) for environmental, pedological, and agronomic applications. Advances in Agronomy. 128:65-2113, 2014. ).
More recently, the portable X-ray fluorescence spectrometer (pXRF) has become a fast, cost-effective and environmentally friendly alternative for the determination of elemental contents in both field and laboratory conditions. pXRF can provide results in a shorter time, with minimal sample preparation and is a non-destructive method (Parsons et al., 2013PARSONS, C. et al. Quantification of trace arsenic in soils by field-portable X-ray fluorescence spectrometry: Considerations for sample preparation and measurement conditions. Journal of Hazardous Materials, 262:1213-1222, 2013. ; Schneider et al., 2016SCHNEIDER, A. R. et al. Comparison of field portable XRF and aqua regia/ICPAES soil analysis and evaluation of soil moisture influence on FPXRF results. Journal of Soils and Sediments. 16(2):438-448, 2016. ; Weindorf; Bakr; Zhu, 2014WEINDORF, D. C.; BAKR, N.; ZHU, Y. Advances in portable X-ray fluorescence (PXRF) for environmental, pedological, and agronomic applications. Advances in Agronomy. 128:65-2113, 2014. ). This technique has facilitated different studies, such as evaluation of soil contamination by heavy metals, pedogenesis, soil chemistry, salinity and mapping, among others (Aldabaa et al., 2015ALDABAA, A. A. A. et al. Combination of proximal and remote sensing methods for rapid soil salinity quantification. Geoderma, 239-240:34-46, 2015. ; Mancini et al., 2019aMANCINI, M. et al. Tracing tropical soil parent material analysis via portable X-ray fluorescence (pXRF) spectrometry in Brazilian Cerrado. Geoderma , 337:718-728, 2019a. , 2019bMANCINI, M. et al. Parent material distribution mapping from tropical soils data via machine learning and portable X-ray fluorescence (pXRF) spectrometry in Brazil. Geoderma , 354:113885, 2019b. ; O’Rourke et al., 2016O’ROURKE, S. M. et al. An assessment of model averaging to improve predictive power of portable vis-NIR and XRF for the determination of agronomic soil properties. Geoderma , 279:31-44, 2016.; Sharma et al., 2014SHARMA, A. et al. Characterizing soils via portable X-ray fluorescence spectrometer: 3. Soil reaction (pH). Geoderma , 232-234:141-147, 2014. ; Silva et al., 2017SILVA, S. H. G. et al. Multiple linear regression and random forest to predict and map soil properties using data from portable X-ray fluorescence spectrometer (pXRF). Ciência e Agrotecnologia , 41(6):648-664, 2017. ; Stockmann et al., 2016aSTOCKMANN, U. et al. Utilizing portable X-ray fluorescence spectrometry for in-field investigation of pedogenesis. Catena, 139:220-231, 2016a. ; Weindorf et al., 2015WEINDORF, D. C. et al. Lithologic discontinuity assessment in soils via portable X-ray fluorescence spectrometry and visible near-infrared diffuse reflectance spectroscopy. Soil Science Society of America Journal , 79(6):1704-1716, 2015. ).
However, works have reported that pXRF field data for many elements differ from those obtained under laboratory conditions, i.e, in air-dried fine earth (Silva et al., 2018SILVA, S. H. G. et al. Tropical soils characterization at low cost and time using portable X-ray fluorescence spectrometer (pXRF): Effects of different sample preparation methods. Ciência e Agrotecnologia , 42(1):80-92, 2018. ; Stockmann et al., 2016bSTOCKMANN, U. et al. The effect of soil moisture and texture on Fe concentration using portable X-ray fluorescence Spectrometers. In: HARTEMINK, A. E.; MINASNY, B. (Eds.). Digital Soil Morphometrics. Cham: Springer International Publishing, 2016b. p.63-71. ), mainly due to differences in moisture, texture, soil organic matter content, and sample roughness (Weindorf; Bakr; Zhu, 2014WEINDORF, D. C.; BAKR, N.; ZHU, Y. Advances in portable X-ray fluorescence (PXRF) for environmental, pedological, and agronomic applications. Advances in Agronomy. 128:65-2113, 2014. ). This may constrain the use of field data, raising the need for correction of such results.
It is known that soil moisture (M) can absorb or disperse incident X-rays, influencing the results obtained by the equipment (Bastos; Melquiades; Biasi, 2012BASTOS, R. O.; MELQUIADES, F. L.; BIASI, G. E. V. Correction for the effect of soil moisture on in situ XRF analysis using low-energy background. X-Ray Spectrometry, 41(5):304-307, 2012.; Ge; Lai; Lin, 2005GE, L.; LAI, W.; LIN, Y. Influence of and correction for moisture in rocks, soils and sediments on in situ XRF analysis. X-Ray Spectrometry , 34(1):28-34, 2005. ; Ribeiro et al., 2018RIBEIRO, B. T. et al. The influence of soil moisture on oxide determination in tropical soils via portable X-ray fluorescence. Soil Science Society of America Journal , 82(3):632-644, 2018. ; Sahraoui; Hachicha, 2017SAHRAOUI, H.; HACHICHA, M. Effect of soil moisture on trace elements concentrations using portable X-ray fluorescence spectrometer. Journal of Fundamental and Applied Sciences, 9(1):468-484, 2017. ; Santana et al., 2019SANTANA, M. L. T. et al. Elemental concentration via portable x-ray fluorescence spectrometry: Assessing the impact of water content. Ciência e Agrotecnologia , 43:e029218, 2019.). Soil texture (T) can be associated with soil chemical and mineralogical composition and is capable of influencing various other soil attributes, such as cation exchange capacity, water infiltration rate and porosity, among others (Resende et al., 2014RESENDE, M. et al. Pedologia: Base para distinção de ambientes. 6a edição ed. Lavras: Editora UFLA, 2014. 378p.). Soil organic matter (SOM), in turn, promotes many benefits for soils, such as increasing water availability and presents great amounts of C, H, and O; however, SOM can attenuate the X-ray beams, causing decreasing contents of elements detected by pXRF (Hudson, 1994HUDSON, B. D. Soil organic matter and available water capacity. Journal of Soil and Water Conservation, 49(2):189-194, 1994. ; Ravansari; Lemke, 2018RAVANSARI, R.; LEMKE, L. D. Portable X-ray fluorescence trace metal measurement in organic rich soils: pXRF response as a function of organic matter fraction. Geoderma , 319:175-184, 2018. ; Shand; Wendler, 2014SHAND, C. A.; WENDLER, R. Portable X-ray fluorescence analysis of mineral and organic soils and the influence of organic matter. Journal of Geochemical Exploration, 143:31-42, 2014. ).
Knowing the factors that may cause interference in the pXRF readings is extremely important for the correction of the field data obtained. Since soil organic matter is concentrated in the soil surface, some soil classes present a texture gradient in depth and that greater depths tend to maintain soil moisture for a longer time (Resende et al., 2014RESENDE, M. et al. Pedologia: Base para distinção de ambientes. 6a edição ed. Lavras: Editora UFLA, 2014. 378p.), the readings carried out with pXRF directly in the field are subject to reading variations caused by these factors (Stockmann et al., 2016aSTOCKMANN, U. et al. Utilizing portable X-ray fluorescence spectrometry for in-field investigation of pedogenesis. Catena, 139:220-231, 2016a. ), which may hindrance works whose pXRF analyses have been conducted in both field and lab. Therefore, to demonstrate that it is possible to convert results of field analyses into those obtained in the lab may be very useful for researchers across the world, avoiding the necessity of analyzing the same sample in the field and in the lab. Furthermore, the influence of these soil properties may be variable according to the different elements, but deeper investigations are yet to be carried out in tropical conditions, especially regarding SOM and T, which have not been evaluated yet.
Thus, the objectives of this study were to create and evaluate mathematical models capable of predicting the content of Al, Ca, Fe, K, Si, V, Ti and Zr obtained by pXRF in lab conditions (air-dried fine earth - ADFE) based on pXRF readings conducted in the field, and to assess the influence of M, T and SOM on the prediction of each element evaluated. The hypothesis of this work is that M, T, and SOM can help in the correction of the pXRF results obtained in the field, being possible to convert them into lab-obtained pXRF results without requiring other pXRF analyses in the lab.
MATERIAL AND METHODS
Study area and sample collection
The study area is located in Lavras, Minas Gerais, Brazil, between latitudes 7,650,808 and 7,651,674 mS and longitudes 500,031 and 492,189 mW, zone 23K. The climate of the region has annual average temperature and precipitation of 20.4 ºC and 1,460 mm, respectively (Dantas; Carvalho; Ferreira, 2007DANTAS, A. A. A.; CARVALHO, L. G. DE; FERREIRA, E. Classificação e tendências climáticas em Lavras, MG. Ciência e Agrotecnologia, 31(6):1862-1866, 2007. ), classified as Cwa (subtropical with dry winter and rainy summer) according to the Köppen climate classification.
The municipality of Lavras is geologically located at the southern edge of the São Francisco Craton. According to Curi et al. (1990CURI, N. et al. Geomorfologia, física, química e mineralogia dos principais solos da região de Lavras (MG). Ciência e Prática, 14(3):297-307, 1990. ) and Quéméneur et al. (2002QUÉMÉNEUR, J. J. G. et al. Mapa geológico - Folha Lavras SF 23-X-C-I. escala 1:100.000. Belo Horizonte: COMIG, 2002.), in the region it is common to find gneisses (leuco and mesocratic) cut by mafic rock dikes, represented mainly by gabbro and gabbronorite, while quartzites predominate in the areas of higher altitudes.
The evaluated soils encompassed these different parent materials as described in Table 1, such as the soil classes and sampled horizons. For this work, 12 soil profiles were described, 59 soil horizons were sampled during two consecutive days within the dry season to assure the actual moisture condition for all soil profiles. Soil profiles were classified at the second and fourth taxonomic levels according to the Brazilian Soil Classification System (Santos et al., 2018SANTOS, H. G. DOS et al. Sistema Brasileiro de Classificação de Solos. 5. ed. Brasília, DF: Embrapa, 2018. 356p.) and the US Soil Taxonomy (Soil Survey Staff, 2014SOIL SURVEY STAFF. Keys to soil taxonomy. 12th ed. Washington, DC: USDA-NRCS, 2014. ), respectively (Table 1). At least one soil profile was described and sampled for each soil class. The main horizons were analyzed in situ, including: A, B, C, and Cr for mineral soils and H (or O horizon per Soil Taxonomy) for organic soils.
Classification, horizons and parent material of the soils sampled in Lavras, Minas Gerais, Brazil.
Soil analyses
The methodological sequence of field and laboratory procedures and the different analyses performed can be seen in Figure 1. First, soil profiles were excavated and the horizons were separated. Then, pXRF analyses were performed in each soil horizon (Table 1) directly on the soil profile wall in the field (pXRF field) (Figure 1), in three places of the same soil horizon, with ca. 10 cm (horizontally) between the scanning positions. The final pXRF result was obtained by averaging the three scanning results. Then, samples from each horizon were collected from the soil profiles, at the places where the scannings were conducted, in order to determine soil moisture and perform the subsequent lab analyses. For pXRF analysis in the laboratory, a portion (ca. 50 g) of each sample was air-dried, sieved at 2 mm (air-dried fine earth - ADFE) and analyzed by pXRF (pXRF ADFE) by directly placing the equipment aperture at the surface of the samples, making sure the amount of the sample was thick enough (ca. 2 cm) to avoid the X-ray beams both passing through it and reaching the base of the Petri dish containing the sample. A Bruker® pXRF model S1 Titan 600 LE containing the software Geochem was used to perform the analyses and yielding the elemental results. This equipment contains a 50 keV and 100 μA X-ray Rh tube with silicon drift detector (SSD) <145 eV.
Field and laboratory pXRF readings were performed in triplicate during 60s in dual soil mode. To verify the quality of data generated by the equipment, two National Institute of Standards and Technology (NIST) certified samples, 2710a and 2711a, and one sample certified by the pXRF manufacturer (Check Sample) were used. The pXRF results were compared with the certified contents for the elements used in this study. The recovery values (pXRF content / certified content) for 2710a, 2711a and Check Sample were, respectively: Al2O3 - 0.96/1.19/0.87; SiO2 - 0.94/1.08/0.88; Fe - 0.43/0.70/0.89; K2O - 0.40/0.59/0.86; CaO - 0.18/0.73/0; Ti - 0.51/0.73/0; Zr - 0.98/0/0. The zero value indicates that either there was no quantification in the reference sample or the element was not detected by pXRF.
To determine soil moisture (M), samples were weighted (Wet Mass - WM) and oven-dried at 105°C during 24 hours. After this period, the samples were again weighted to determine the dry mass (DM). Thus, soil moisture (%) was calculated using Equation 1. The collected samples were also subjected to laboratory analysis to determine texture (Gee; Bauder, 1986GEE, G. W.; BAUDER, J. W. Particle-size analysis. In: KLUTE, A. (Ed.). Methods of Soil Analysis. Part 1 - Physical and Mineralogical Methods. 2nd. ed. Madison, WI: SSSA, 1986. p.383-411. ) and soil organic matter (Walkley; Black, 1934WALKLEY, A.; BLACK, I. A. An examination of the Degtjareff method for determining soil organic matter and a proposed modification of the chromic acid titration method. Soil Science , 37(1):29-38, 1934. ).
Statistical analyses
For the prediction of the pXRF results obtained in the laboratory (ADFE) based on the results obtained in the field for each element, linear regression models were created using different combinations of pXRF results obtained in the field with the independent variables M, T and SOM, according to Equations 2, 3, 4, 5, 6, 7, 8 and 9.
where a is the slope, y is the content of each element to be predicted in the ADFE, x is the content of each element obtained in the field by pXRF, M is soil moisture, T is texture (sand, silt, and clay contents) and SOM is the soil organic matter content.
The accuracy of the predictions of each element content in the ADFE was calculated by the leave-one-out cross-validation method of the “caret” package (Kuhn et al., 2018KUHN, M. et al. Package ‘caret’, 2018. Available in: Available in: https://github.com/topepo/caret/
. Access in: Oct. 25, 2019.
https://github.com/topepo/caret/...
) in the R software (R Core Team, 2019R CORE TEAM. R: A language and environment for statistical computing. Vienna, Austria. R Foundation for Statistical Computing, 2019. Available in: Available in: https://www.r-project.org/
. Access in: Jan. 17, 2019.
https://www.r-project.org/...
), through calculation of the following parameters: R², root mean square error (RMSE) (Equation 10) and normalized RMSE (NRMSE) (Equation 11).
where n is the number of observations, and i is the element content predicted by pXRF in ADFE through the models, ei is the estimated content of elements, and mi is the content of elements obtained by pXRF in ADFE.
In addition to these parameters, the relative improvement (RI) (Equation 12) of the models in relation to the simple linear model of Equation 2 was calculated. Thus, it was possible to define if the auxiliary variables M, T and SOM contribute to the prediction of the content of each element obtained by pXRF in ADFE, based on the contents obtained by pXRF in the field.
RESULTS AND DISCUSSION
Characterization of the soil moisture, texture and organic matter
The values of minimum, maximum, mean, standard deviation (SD), and coefficient of variation (CV) for texture (clay, silt, and sand contents), M and SOM of the studied soils are presented in Table 2. The substantial range of the values reflects the different soil classes and the parent materials in which the samples were collected.
Minimum, maximum, mean, standard deviation (SD), and coefficient of variation (CV) obtained for soil texture (clay, silt, and sand contents), moisture (M) and organic matter (SOM) for the studied soils.
The highest SD values were obtained for texture, as there is great variability between the soil classes, horizons, parent materials (Resende et al., 2014RESENDE, M. et al. Pedologia: Base para distinção de ambientes. 6a edição ed. Lavras: Editora UFLA, 2014. 378p.) (Figure 2). Additionally, different degrees of weathering and erosion rate of soils influence soil texture (Zhang et al., 2019ZHANG, J. et al. Soil physical characteristics of a degraded tropical grassland and a ‘reforest’: Implications for runoff generation. Geoderma , 333:163-177, 2019. ), helping to explain the results.
Textural classes of the samples collected in soils developed from different parent materials.
In general, the clay content increases in the following order: quartzite < gneiss < gabbro. The higher the quartz content in the parent material the smaller the soil clay content, which is associated with the high quartz resistance to weathering mostly present in the sand particle size fraction.
The variation in SOM contents (Figure 3) was probably caused by different land uses and practices of soil management (Foley et al., 2005FOLEY, J. A. et al. Global Consequences of Land Use. Science, 309(5734):570-574, 2005. ), as well as the depth of the sample, clay content, mineralogy, climate, moisture regime, among others (Resende et al., 2014RESENDE, M. et al. Pedologia: Base para distinção de ambientes. 6a edição ed. Lavras: Editora UFLA, 2014. 378p.). The highest contents of SOM were observed in the Haplic Organosol (Typic Udifolist), due to the paludization pedogenetic process (Santos et al., 2018SANTOS, H. G. DOS et al. Sistema Brasileiro de Classificação de Solos. 5. ed. Brasília, DF: Embrapa, 2018. 356p.). For the other soil classes, the highest SOM content was observed in the superficial horizon. The soils derived from quartzite presented lower SOM contents probably due to their higher sand content and the dominance of sparse grasses in the area, causing little deposition of organic matter. The soils derived from gneiss and gabbro, due to their higher clay contents among other factors, presented higher accumulation of SOM.
Soil moisture (Figure 4) varied according to clay fraction content, SOM content, climatic conditions and land use, and its availability may still be influenced by soil management (Centurion; Andrioli, 2000CENTURION, J. F.; ANDRIOLI, I. Regime hídrico de alguns solos de Jaboticabal. Revista Brasileira de Ciência do Solo , 24(4):701-709, 2000. ). The highest moisture content was observed in the Haplic Organosol (Typic Udifolist), related to its position in the landscape and to the higher SOM content, since all the samples were collected in two consequent days within the dry season. Conversely, the soils derived from quartzite, mostly due to their texture rich in sand and lower SOM contents, presented the lowest moisture content.
Moisture content in soils derived from quartzite, gneiss, gabbro and organic and mineral sediments.
Variation of soil elemental contents
The soils developed from gabbro presented, on average, higher Fe contents compared to the soils developed from other parent materials (Table 3). This is primarily because the parent rock had a higher Fe content (Monroe; Wicander, 2017MONROE, J. S.; WICANDER, R. Geologia. 2nd. ed. Cengage Learning, 2017. 464p.) and Fe tends to accumulate in soils. Conversely, quartzite-derived soils presented the highest SiO2 contents compared to the others, because this rock is basically composed of quartz (SiO2), a very resistant mineral to weathering (Resende et al., 2019RESENDE, M. et al. Da rocha ao solo: Enfoque ambiental. 1. ed. Lavras: Editora UFLA , 2019. 512p.). Also, relationships between the content of certain chemical elements and the different textural fractions of the soil can be made (Zhu; Weindorf; Zhang, 2011ZHU, Y.; WEINDORF, D. C.; ZHANG, W. Characterizing soils using a portable X-ray fluorescence spectrometer: 1. Soil texture. Geoderma , 167-168:167-177, 2011.). In tropical soils, for instance, greater contents of SiO2 tend to correspond to soils rich in quartz (SiO2), dominantly found in greater contents in soils rich in sand (Kämpf; Maques; Curi, 2012KÄMPF, N.; MARQUES, J. J.; CURI, N. Mineralogia de solos brasileiros. In: KER, J. C. et al. (Ed.). Pedologia: Fundamentos. 1. ed. Viçosa, MG: SBCS, 2012. p.343. ; Silva et al., 2019SILVA, S. H. G. et al. Modeling and prediction of sulfuric acid digestion analyses data from pXRF spectrometry in tropical soils. Scientia Agricola, 77(4):e20180132, 2019.).
Mean contents of elements (mg kg-1) obtained by portable X-ray fluorescence (pXRF) spectrometer in soils in the field and in air-dried fine earth (ADFE) samples.
The elemental contents of the soil samples varied according to field or laboratory - ADFE (Figures 5 and 6). In general, the contents of all elements or oxides in ADFE were higher than those obtained in the field, with the exception of light-weight elements. This may have occurred because light-weight elements are more influenced by moisture, as also reported by Ribeiro et al. (2018RIBEIRO, B. T. et al. The influence of soil moisture on oxide determination in tropical soils via portable X-ray fluorescence. Soil Science Society of America Journal , 82(3):632-644, 2018. ).
Elemental content obtained by portable X-ray fluorescence (pXRF) spectrometer in soils in the field and in ADFE for Al2O3, Fe, SiO2, CaO, K2O, Ti, V, and Zr.
Field and laboratory (air-dried fine earth - ADFE) pXRF results of tropical soils for Al2O3, CaO, Fe, K2O, SiO2, V, Ti, and Zr.
The percentage of samples that presented higher contents in ADFE compared to contents of the field analysis was 97% for CaO, Fe, and Ti, 93% for K2O, 88% for SiO2, 86% for Zr, 57% for Al2O3, and 71% for V. Stockmann et al. (2016aSTOCKMANN, U. et al. Utilizing portable X-ray fluorescence spectrometry for in-field investigation of pedogenesis. Catena, 139:220-231, 2016a. ; 2016bSTOCKMANN, U. et al. The effect of soil moisture and texture on Fe concentration using portable X-ray fluorescence Spectrometers. In: HARTEMINK, A. E.; MINASNY, B. (Eds.). Digital Soil Morphometrics. Cham: Springer International Publishing, 2016b. p.63-71. ), evaluating the elemental contents obtained in both field and laboratory (ADFE) conditions by pXRF in Australia, observed that, in general, the contents of Fe, K and Ca were higher in ADFE than those obtained in the field, as found in this work (Figure 6).
Prediction models
The values of R²adj corresponding to the adjustment of the linear models to predict Al2O3, CaO, Fe, K2O, SiO2, V, Ti, and Zr in ADFE from the results of pXRF field analyses, considering the influence of M, T and SOM are presented in Figure 7. For FeADFE and K2OADFE predictions, slight differences in R²adj were observed when adding the auxiliary variables to the models. Stockmann et al. (2016bSTOCKMANN, U. et al. The effect of soil moisture and texture on Fe concentration using portable X-ray fluorescence Spectrometers. In: HARTEMINK, A. E.; MINASNY, B. (Eds.). Digital Soil Morphometrics. Cham: Springer International Publishing, 2016b. p.63-71. ) reported the small effect of moisture on Fe content obtained by pXRF, similarly to reports of Ribeiro et al. (2018RIBEIRO, B. T. et al. The influence of soil moisture on oxide determination in tropical soils via portable X-ray fluorescence. Soil Science Society of America Journal , 82(3):632-644, 2018. ) and the findings of this work. However, here it was noticed that T and SOM also have a very low effect on Fe results.
R²adj corresponding to the adjustment of linear models for the prediction of the Al2O3, CaO, Fe, K2O, SiO2, Ti, V, and Zr contents obtained in the air-dried fine earth (ADFE) from the results of the pXRF analyses conducted in field in association with moisture (M), texture (T) and soil organic matter (SOM).
The models that considered the soil texture as an auxiliary variable delivered higher values of R²adj for the prediction of SiO2 and V. SiO2 predictions reached R²adj of 0.60 using only the data obtained in the field, but it increased to 0.76 when adding soil texture to the prediction models. The increment of the R²adj values with the addition of the texture data can be explained by the fact that quartz, composed of SiO2, is the predominant component in the sand fraction of Brazilian soils (Alves et al., 2013ALVES, M. J. F. et al. Reserva mineral de potássio em Latossolo cultivado com Pinus taeda L. Revista Brasileira de Ciência do Solo, 37(6):1599-1610, 2013. ; Araujo et al., 2014ARAUJO, M. A. et al. Paragênese mineral de solos desenvolvidos de diferentes litologias na região sul de Minas Gerais. Revista Brasileira de Ciência do Solo , 38(1):11-25, 2014. ). Importantly, the changes in soil moisture did not significantly implied changes in R²adj for SiO2 contents, contrary to the findings of Ribeiro et al. (2018RIBEIRO, B. T. et al. The influence of soil moisture on oxide determination in tropical soils via portable X-ray fluorescence. Soil Science Society of America Journal , 82(3):632-644, 2018. ). SOM did not improve SiO2 models either.
For V, R2 adj increased from 0.73 to 0.80 with addition of texture, with a small increase by adding only moisture (0.73 to 0.75) and no improvement when adding soil organic matter as an auxiliary variable. V presents dynamics similar to Fe and Fe secondary oxide minerals (Aide, 2005AIDE, M. Geochemical assessment of iron and vanadium relationships in oxic soil environments. Soil and Sediment Contamination: An International Journal, 14(5):403-416, 2005. ; Kabata-Pendias, 2010KABATA-PENDIAS, A. Trace Elements in Soils and Plants. 4th. ed. Boca Raton: CRC Press, 2010. 548p.; Martin; Kaplan, 1998MARTIN, H. W.; KAPLAN, D. I. Temporal changes in cadmium, thallium, and vanadium mobility in soil and phytoavailability under field conditions. Water, Air, and Soil Pollution, 101(1):399-410, 1998. ). V3+ tends to accumulate along weathering and it can be incorporated into octahedral sites of kaolinite, gibbsite, hematite, and goethite, which are dominant in the clay fraction of most Brazilian soils (Marques et al., 2004MARQUES, J. J. et al. Major element geochemistry and geomorphic relationships in Brazilian Cerrado soils. Geoderma , 119(3-4):179-195, 2004. ). Differences in R²adj values were minimal for K2O and Fe prediction by adding moisture, texture and soil organic matter. For K2O, the model with pXRF field data coupled with texture provided R2 adj of 0.80 compared with 0.79 using only pXRF field data. For Fe, all the models presented minimal variation, with all the R2 adj achieving values of 0.93.
The model for Al2O3 prediction obtained in laboratory with addition of SOM presented the smallest R2 adj (0.61) when compared to the models generated from the addition of texture and moisture. Although a small increase occurred when adding the two latter variables to the models, the R2 adj values reached 0.65 and 0.62, respectively. Texture and moisture, when combined with pXRF data, promoted the same result as the model using only pXRF and texture data. Soil moisture generally underestimates pXRF results (Bastos; Melquiades; Biasi, 2012BASTOS, R. O.; MELQUIADES, F. L.; BIASI, G. E. V. Correction for the effect of soil moisture on in situ XRF analysis using low-energy background. X-Ray Spectrometry, 41(5):304-307, 2012.; Hangen; Vieten, 2016HANGEN, E.; VIETEN, F. Influence of soil pore length upon portable X-ray fluorescence spectrometer measurements of elements in soils. Water, Air, & Soil Pollution, 227(5):143, 2016. ; Lemiere et al., 2014LEMIERE, B. et al. Portable XRF and wet materials: Application to dredged contaminated sediments from waterways. Geochemistry: Exploration, Environment, Analysis, 14(3):257-264, 2014. ), while texture may affect pXRF analyses due to the range of particle sizes and soil heterogeneity (Berger; Zou; Schleicher, 2009BERGER, M.; ZOU, L.; SCHLEICHER, R. Analysis of sulfur in the copper basin and muddy river sites using portable XRF instrumentation. International Journal of Soil, Sediment and Water, 2(3):1-17, 2009. ). For Ti prediction, when moisture and texture were added to the model, R2 adj values varied from 0.52 to 0.54 and 0.63, respectively. High and positive correlations (0.78) were found by Zhu et al. (2011ZHU, Y.; WEINDORF, D. C.; ZHANG, W. Characterizing soils using a portable X-ray fluorescence spectrometer: 1. Soil texture. Geoderma , 167-168:167-177, 2011.) between Ti and clay contents in temperate soils from USA, supporting the importance of texture for Ti prediction models.
For Zr prediction, R2 adj values were the lowest among the evaluated elements. With the addition of texture, R2 adj increased from 0.38 to 0.45, unlike the inclusion of other variables that did not produce considerable improvements. Stockmann et al. (2016bSTOCKMANN, U. et al. The effect of soil moisture and texture on Fe concentration using portable X-ray fluorescence Spectrometers. In: HARTEMINK, A. E.; MINASNY, B. (Eds.). Digital Soil Morphometrics. Cham: Springer International Publishing, 2016b. p.63-71. ), studying the pedogenesis of soils developed from different parent materials, verified an increase in Zr content with an increase in clay content. Since Zr is an element commonly found in very resistant minerals, its content tends to relatively increase with soil weathering. Curi and Franzmeier (1987CURI, N.; FRANZMEIER, D. P. Effect of parent rocks on chemical and mineralogical properties of some Oxisols in Brazil. Soil Science Society of America Journal, 51(1):153-158, 1987. ) noted that clay-textured soils (71% clay) developed from basalt showed an increase in soil Zr content relative to rock due to Zr presence in zircon, a weathering resistant mineral. Several studies have highlighted the influence of particle size on pXRF analysis (Berger; Zou; Schleicher, 2009BERGER, M.; ZOU, L.; SCHLEICHER, R. Analysis of sulfur in the copper basin and muddy river sites using portable XRF instrumentation. International Journal of Soil, Sediment and Water, 2(3):1-17, 2009. ; Parsons et al., 2013PARSONS, C. et al. Quantification of trace arsenic in soils by field-portable X-ray fluorescence spectrometry: Considerations for sample preparation and measurement conditions. Journal of Hazardous Materials, 262:1213-1222, 2013. ; Stockmann et al., 2016bSTOCKMANN, U. et al. The effect of soil moisture and texture on Fe concentration using portable X-ray fluorescence Spectrometers. In: HARTEMINK, A. E.; MINASNY, B. (Eds.). Digital Soil Morphometrics. Cham: Springer International Publishing, 2016b. p.63-71. ; Zhu; Weindorf; Zhang, 2011ZHU, Y.; WEINDORF, D. C.; ZHANG, W. Characterizing soils using a portable X-ray fluorescence spectrometer: 1. Soil texture. Geoderma , 167-168:167-177, 2011.). This is explained by the fact that larger particles in the soil may not represent the entire composition contained in the sample (Parsons et al., 2013PARSONS, C. et al. Quantification of trace arsenic in soils by field-portable X-ray fluorescence spectrometry: Considerations for sample preparation and measurement conditions. Journal of Hazardous Materials, 262:1213-1222, 2013. ).
Models validation
In general, good values of the validation parameters of the prediction models were achieved, reaching high R² and low NRMSE and RMSE (Figures 8 and 9, and Table 4, respectively). For Fe, the high R² value and the lowest value of NMRSE are notorious, showing that the prediction of FeADFE yields adequate results under different conditions. However, when analyzing RI (Table 4) for different models using different sets of variables, there is no considerable improvement. Thus, for Fe, only field data is capable to deliver accurate predictions of the values in ADFE, and it is not necessary to add other variables to the prediction models. This enables to perform these analyses even faster and more economical, since adding other variables would increase costs and time.
Coefficient of determination (R²) corresponding to the validation of linear models for the prediction of Al2O3, CaO, Fe, K2O, SiO2, Ti, V, and Zr contents obtained by portable X-ray fluorescence (pXRF) spectrometry on air-dried fine earth (ADFE) based on pXRF analysis in field associated with texture (T), moisture (M) and soil organic matter (SOM).
Normalized root mean square error (NRMSE) corresponding to the validation of linear models to predict Al2O3, CaO, Fe, K2O, SiO2, Ti, V, and Zr contents obtained by portable X-ray fluorescence (pXRF) spectrometer in air-dried fine earth (ADFE) based on field pXRF analysis in field associated with texture (T), moisture (M) and soil organic matter (SOM).
Root mean square error (RMSE) and relative improvement (RI) corresponding to the validation of models for the prediction of Al2O3, CaO, Fe, K2O, SiO2, V, Ti, and Zr contents of the air-dried fine earth (ADFE) by portable x-ray fluorescence (pXRF) spectrometer based on field pXRF analysis associated with texture (T), moisture (M) and soil organic matter (SOM).
For SiO2 and V, the values of R² were high (Figure 8) and together with the low NRMSE obtained (Figure 9), indicate a good performance of the model in comparison with most other elements. Also, SiO2 and V presented a higher RI among all groups, reaching 20.29% and 17.90%, respectively, after adding only the texture as an auxiliary variable. Thus, addition of texture allows better predictions for SiO2 and V without the addition of other variables. For K2O, R² values were high (0.77) and RMSE values were low and there were no remarkable distinctions regarding the addition of different variables to the models. Also, the highest RI was achieved with the addition of texture only (1.28%). It is possible to state that, due to the small contribution of texture, the field data are sufficient for good predictions. The same happened for Fe, where the RI values were mostly low and negative (-1.52%), except for the model adding SOM and T (2.40%).
Ti presented the highest R² (0.60), with a considerable RI (11.18%) in the models to which texture and soil organic matter were added. For CaO, the highest R² was 0.48, however, the RMSE presented the highest value (1.141,24) in relation to the other elements (Table 4). This was probably caused by some pXRF readings that did not detect CaO in one of the conditions (field or lab), drastically increasing RMSE. Al2O3 models presented values of R² between 0.56 and 0.60, not much different from other elements that obtained R² near or higher than 0.80, such as Fe, K2O, SiO2, and V. However, the RI for Al2O3 was negative for most models, especially by adding texture and SOM (RI = -5.28%), and when all variables were included (RI = -5.24%). Small positive RI values were obtained by adding only M (0.15%) and M+T (0.97%) (Table 4).
For Zr validation, R² was very low and NRMSE was very high. Therefore, it is not advisable to use these models to predict ZrADFE. Despite of that, it can be observed that adding texture produced a slight improvement over the initial model ranging from 0.30 to 0.35, respectively, indicating that this variable has some positive interference in the prediction of Zr in the ADFE.
Most prediction models were strongly influenced by texture. In tropical soils, the higher sand content tend to positively correlate with SiO2 content, since this particle size fraction in most soils is dominated by quartz, composed by SiO2 (Kämpf; Marques; Curi, 2012KÄMPF, N.; MARQUES, J. J.; CURI, N. Mineralogia de solos brasileiros. In: KER, J. C. et al. (Ed.). Pedologia: Fundamentos. 1. ed. Viçosa, MG: SBCS, 2012. p.343. ; Silva et al., 2019SILVA, S. H. G. et al. Modeling and prediction of sulfuric acid digestion analyses data from pXRF spectrometry in tropical soils. Scientia Agricola, 77(4):e20180132, 2019.). Thus, the use of texture in SiO2 (and in almost all the other) prediction models improved all statistical parameters evaluated in relation to models that did not use texture as an auxiliary variable. Moisture had less importance than texture in the accuracy improvement of the models, since the reduction in X-ray intensity is proportional to the increase of water content in the sample (Stockmann et al., 2016bSTOCKMANN, U. et al. The effect of soil moisture and texture on Fe concentration using portable X-ray fluorescence Spectrometers. In: HARTEMINK, A. E.; MINASNY, B. (Eds.). Digital Soil Morphometrics. Cham: Springer International Publishing, 2016b. p.63-71. ). In these tropical soils, soil organic matter did not strongly affect the models, as opposite to the findings of Ravansari and Lemke (2018RAVANSARI, R.; LEMKE, L. D. Portable X-ray fluorescence trace metal measurement in organic rich soils: pXRF response as a function of organic matter fraction. Geoderma , 319:175-184, 2018. ) in soils from Canada to which three organic materials were added and elemental contents were measured via pXRF after each organic material addition. It is important to re-emphasize that both soil texture and organic matter are factors that directly influence soil moisture.
CONCLUSIONS
The elemental/oxides contents obtained by pXRF in field soil analysis and under laboratory conditions (in ADFE) varied for all analyzed elements/oxides. However, models for prediction of the contents in ADFE could be well adjusted for conversion of the results obtained in field for most elements/oxides. In general, soil texture coupled with field pXRF analyses was more helpful to predicting the elemental content of ADFE results than moisture and soil organic matter. Fe and K2O contents in ADFE could be satisfactorily predicted from field data, without the addition of soil organic matter, texture or soil moisture. For CaO and Zr, results were less expressive even with the addition of all the auxiliary variables to the models. Thus, through simple models, it is possible to convert the pXRF results obtained in field into those obtained in ADFE for Al2O3, SiO2, Fe, K2O, V and Ti with or without the need to include auxiliary variables (T, M or SOM) according to the element.
ACKNOWLEDGEMENTS
The authors would like to thank to the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES), and Fundação de Amparo à Pesquisa de Minas Gerais (FAPEMIG) for scholarships and for the financial support that enabled the development of this research
REFERENCES
- AIDE, M. Geochemical assessment of iron and vanadium relationships in oxic soil environments. Soil and Sediment Contamination: An International Journal, 14(5):403-416, 2005.
- ALDABAA, A. A. A. et al. Combination of proximal and remote sensing methods for rapid soil salinity quantification. Geoderma, 239-240:34-46, 2015.
- ALVES, M. J. F. et al. Reserva mineral de potássio em Latossolo cultivado com Pinus taeda L. Revista Brasileira de Ciência do Solo, 37(6):1599-1610, 2013.
- ARAUJO, M. A. et al. Paragênese mineral de solos desenvolvidos de diferentes litologias na região sul de Minas Gerais. Revista Brasileira de Ciência do Solo , 38(1):11-25, 2014.
- BASTOS, R. O.; MELQUIADES, F. L.; BIASI, G. E. V. Correction for the effect of soil moisture on in situ XRF analysis using low-energy background. X-Ray Spectrometry, 41(5):304-307, 2012.
- BERGER, M.; ZOU, L.; SCHLEICHER, R. Analysis of sulfur in the copper basin and muddy river sites using portable XRF instrumentation. International Journal of Soil, Sediment and Water, 2(3):1-17, 2009.
- CENTURION, J. F.; ANDRIOLI, I. Regime hídrico de alguns solos de Jaboticabal. Revista Brasileira de Ciência do Solo , 24(4):701-709, 2000.
- CURI, N. et al. Geomorfologia, física, química e mineralogia dos principais solos da região de Lavras (MG). Ciência e Prática, 14(3):297-307, 1990.
- CURI, N.; FRANZMEIER, D. P. Effect of parent rocks on chemical and mineralogical properties of some Oxisols in Brazil. Soil Science Society of America Journal, 51(1):153-158, 1987.
- DANTAS, A. A. A.; CARVALHO, L. G. DE; FERREIRA, E. Classificação e tendências climáticas em Lavras, MG. Ciência e Agrotecnologia, 31(6):1862-1866, 2007.
- FOLEY, J. A. et al. Global Consequences of Land Use. Science, 309(5734):570-574, 2005.
- GE, L.; LAI, W.; LIN, Y. Influence of and correction for moisture in rocks, soils and sediments on in situ XRF analysis. X-Ray Spectrometry , 34(1):28-34, 2005.
- GEE, G. W.; BAUDER, J. W. Particle-size analysis. In: KLUTE, A. (Ed.). Methods of Soil Analysis. Part 1 - Physical and Mineralogical Methods. 2nd. ed. Madison, WI: SSSA, 1986. p.383-411.
- HANGEN, E.; VIETEN, F. Influence of soil pore length upon portable X-ray fluorescence spectrometer measurements of elements in soils. Water, Air, & Soil Pollution, 227(5):143, 2016.
- HUDSON, B. D. Soil organic matter and available water capacity. Journal of Soil and Water Conservation, 49(2):189-194, 1994.
- KABATA-PENDIAS, A. Trace Elements in Soils and Plants. 4th. ed. Boca Raton: CRC Press, 2010. 548p.
- KÄMPF, N.; MARQUES, J. J.; CURI, N. Mineralogia de solos brasileiros. In: KER, J. C. et al. (Ed.). Pedologia: Fundamentos. 1. ed. Viçosa, MG: SBCS, 2012. p.343.
- KUHN, M. et al. Package ‘caret’, 2018. Available in: Available in: https://github.com/topepo/caret/ Access in: Oct. 25, 2019.
» https://github.com/topepo/caret/ - LEMIERE, B. et al. Portable XRF and wet materials: Application to dredged contaminated sediments from waterways. Geochemistry: Exploration, Environment, Analysis, 14(3):257-264, 2014.
- MANCINI, M. et al. Tracing tropical soil parent material analysis via portable X-ray fluorescence (pXRF) spectrometry in Brazilian Cerrado. Geoderma , 337:718-728, 2019a.
- MANCINI, M. et al. Parent material distribution mapping from tropical soils data via machine learning and portable X-ray fluorescence (pXRF) spectrometry in Brazil. Geoderma , 354:113885, 2019b.
- MARQUES, J. J. et al. Major element geochemistry and geomorphic relationships in Brazilian Cerrado soils. Geoderma , 119(3-4):179-195, 2004.
- MARTIN, H. W.; KAPLAN, D. I. Temporal changes in cadmium, thallium, and vanadium mobility in soil and phytoavailability under field conditions. Water, Air, and Soil Pollution, 101(1):399-410, 1998.
- MONROE, J. S.; WICANDER, R. Geologia. 2nd. ed. Cengage Learning, 2017. 464p.
- O’ROURKE, S. M. et al. An assessment of model averaging to improve predictive power of portable vis-NIR and XRF for the determination of agronomic soil properties. Geoderma , 279:31-44, 2016.
- PARSONS, C. et al. Quantification of trace arsenic in soils by field-portable X-ray fluorescence spectrometry: Considerations for sample preparation and measurement conditions. Journal of Hazardous Materials, 262:1213-1222, 2013.
- POTTS, P. J.; WEST, M. Portable X-ray fluorescence spectrometry: Capabilities for in vitro analysis. Cambridge: Royal Society of Chemistry, 2008. 304p.
- QUÉMÉNEUR, J. J. G. et al. Mapa geológico - Folha Lavras SF 23-X-C-I. escala 1:100.000. Belo Horizonte: COMIG, 2002.
- R CORE TEAM. R: A language and environment for statistical computing. Vienna, Austria. R Foundation for Statistical Computing, 2019. Available in: Available in: https://www.r-project.org/ Access in: Jan. 17, 2019.
» https://www.r-project.org/ - RAVANSARI, R.; LEMKE, L. D. Portable X-ray fluorescence trace metal measurement in organic rich soils: pXRF response as a function of organic matter fraction. Geoderma , 319:175-184, 2018.
- RESENDE, M. et al. Pedologia: Base para distinção de ambientes. 6a edição ed. Lavras: Editora UFLA, 2014. 378p.
- RESENDE, M. et al. Da rocha ao solo: Enfoque ambiental. 1. ed. Lavras: Editora UFLA , 2019. 512p.
- RIBEIRO, B. T. et al. Portable X-ray fluorescence (pXRF) applications in tropical Soil Science . Ciência e Agrotecnologia , 41(3):245-254, 2017.
- RIBEIRO, B. T. et al. The influence of soil moisture on oxide determination in tropical soils via portable X-ray fluorescence. Soil Science Society of America Journal , 82(3):632-644, 2018.
- SAHRAOUI, H.; HACHICHA, M. Effect of soil moisture on trace elements concentrations using portable X-ray fluorescence spectrometer. Journal of Fundamental and Applied Sciences, 9(1):468-484, 2017.
- SANTANA, M. L. T. et al. Elemental concentration via portable x-ray fluorescence spectrometry: Assessing the impact of water content. Ciência e Agrotecnologia , 43:e029218, 2019.
- SANTOS, H. G. DOS et al. Sistema Brasileiro de Classificação de Solos. 5. ed. Brasília, DF: Embrapa, 2018. 356p.
- SCHNEIDER, A. R. et al. Comparison of field portable XRF and aqua regia/ICPAES soil analysis and evaluation of soil moisture influence on FPXRF results. Journal of Soils and Sediments. 16(2):438-448, 2016.
- SHAND, C. A.; WENDLER, R. Portable X-ray fluorescence analysis of mineral and organic soils and the influence of organic matter. Journal of Geochemical Exploration, 143:31-42, 2014.
- SHARMA, A. et al. Characterizing soils via portable X-ray fluorescence spectrometer: 3. Soil reaction (pH). Geoderma , 232-234:141-147, 2014.
- SILVA, S. H. G. et al. Multiple linear regression and random forest to predict and map soil properties using data from portable X-ray fluorescence spectrometer (pXRF). Ciência e Agrotecnologia , 41(6):648-664, 2017.
- SILVA, S. H. G. et al. Tropical soils characterization at low cost and time using portable X-ray fluorescence spectrometer (pXRF): Effects of different sample preparation methods. Ciência e Agrotecnologia , 42(1):80-92, 2018.
- SILVA, S. H. G. et al. Modeling and prediction of sulfuric acid digestion analyses data from pXRF spectrometry in tropical soils. Scientia Agricola, 77(4):e20180132, 2019.
- SOIL SURVEY STAFF. Keys to soil taxonomy. 12th ed. Washington, DC: USDA-NRCS, 2014.
- STOCKMANN, U. et al. Utilizing portable X-ray fluorescence spectrometry for in-field investigation of pedogenesis. Catena, 139:220-231, 2016a.
- STOCKMANN, U. et al. The effect of soil moisture and texture on Fe concentration using portable X-ray fluorescence Spectrometers. In: HARTEMINK, A. E.; MINASNY, B. (Eds.). Digital Soil Morphometrics. Cham: Springer International Publishing, 2016b. p.63-71.
- WALKLEY, A.; BLACK, I. A. An examination of the Degtjareff method for determining soil organic matter and a proposed modification of the chromic acid titration method. Soil Science , 37(1):29-38, 1934.
- WEINDORF, D. C. et al. Lithologic discontinuity assessment in soils via portable X-ray fluorescence spectrometry and visible near-infrared diffuse reflectance spectroscopy. Soil Science Society of America Journal , 79(6):1704-1716, 2015.
- WEINDORF, D. C.; BAKR, N.; ZHU, Y. Advances in portable X-ray fluorescence (PXRF) for environmental, pedological, and agronomic applications. Advances in Agronomy. 128:65-2113, 2014.
- ZHANG, J. et al. Soil physical characteristics of a degraded tropical grassland and a ‘reforest’: Implications for runoff generation. Geoderma , 333:163-177, 2019.
- ZHU, Y.; WEINDORF, D. C.; ZHANG, W. Characterizing soils using a portable X-ray fluorescence spectrometer: 1. Soil texture. Geoderma , 167-168:167-177, 2011.
Publication Dates
-
Publication in this collection
08 June 2020 -
Date of issue
2020
History
-
Received
31 Jan 2020 -
Accepted
08 May 2020