Acessibilidade / Reportar erro

Production, characterization and application of inulinase from fungal endophyte CCMB 328

Abstracts

Inulinase (β-2,1-D- fructan fructanohydrolase), EC 3.2.1.7, targets the β-2,1 linkage of inulin, a polyfructan consisting of linear β-2,1 linked fructose, and hydrolyzes it into fructose. This use provides an alternative to produce fructose syrup through the hydrolysis of inulin. The objective of this work was to study the production, characterization and applications of inulinases from the fungal endophyte CCMB 328 isolated from the Brazilian semi-arid region. Response Surface Methodology (RSM) was employed to evaluate the effect of variables (concentration of glucose and yeast extract), on secreted inulinase activities detected in the culture medium and also in the inulin hydrolysis. The results showed that the best conditions for inulinase production by CCMB 328 are 9.89 g / L for glucose and 1.09 g / L for yeast extract. The concentration of 0.20 mol/L of NaCl and KCl increased the activity of inulinase from CCMB 328 by approximately 63% and 37%, respectively. The results also showed that the inulinase has potential for inulin hydrolysis, whose conversion yields roughly 72.48 % for an initial concentration of inulin at 1% (w/v).

Inulin; inulinase; yeasts; semi-arid; fungal endophyte


A enzima inulinase (EC 3.2.1.7, β-D-frutano frutanohidrolase) atua sobre as ligações β-2,1 da inulina, um polifrutano consistindo de frutose unida por ligações β-2,1. A hidrólise de inulina através do uso de inulinase é uma alternativa viável para a obtenção de xarope de frutose. O objetivo deste trabalho foi estudar a produção, caracterização e aplicação de inulinase obtidas a partir do fungo endofítico CCMB 328, isolado do semi-árido brasileiro. A metodologia de Superfície de Resposta (MSR) foi empregado para avaliar os efeitos das variáveis (concentração de glicose e extrato de levedura) na atividade da enzima inulinase produzida em meio de cultura líquido e também para avaliar a atividade da enzima na hidrólise de inulina. Os resultados mostraram que as melhores condições para a produção de inulinase pela levedura CCMB 328 são 9,89 g/L de glicose e 1,09 g/L de extrato de levedura. A concentração de 0,20 mol/L de NaCl e KCl aumentou a atividade da enzima da CCMB 328 em aproximadamente 63% e 37%, respectivamente. Os resultados também mostraram que a enzima inulinase tem potencial para a hidrólise de inulina, apresentando rendimentos de 72,48 % para uma concentração inicial de inulina de 1% (m/v).

Inulina; inulinase; leveduras; semi-árido; fungo endofítico


Production, characterization and application of inulinase from fungal endophyte CCMB 328

Diego S. NascimentoI; Gildomar Valasques JuniorI; Pedro FernandesIII; Geise C.A. RibeiroI; Danyo M. LimaI; Aristóteles Góes-NetoII; Rodrigo Q. OliveiraI; Rita de Cassia L. Figueiredo-RibeiroIV; Sandra A. de AssisI

ILaboratório de Enzimologia e Tecnologia de Fermentação, Departamento de Saúde, Universidade Estadual de Feira de Santana (UEFS), Av. Transnordestina, s/n, Km 0, BR 116, 44036-900 Feira de Santana, BA, Brasil

IILaboratório de Pesquisa em Microbiologia, Departamento de Ciências Biológicas, Universidade Estadual de Feira de Santana (UEFS), Av. Transnordestina, s/n, Km 0, BR 116, 44036-900 Feira de Santana, BA, Brasil

IIIInstituto de Biotecnologia e Bioengenharia (IBB), Centro de Engenharia Biológica e Química, Departamento de Bioengenharia, Instituto Superior Técnico, 1049-001, Universidade Técnica de Lisboa, Lisboa, Portugal

IVInstituto de Botânica, Caixa Postal 68041, 04045-972 São Paulo, SP, Brasil

Correspondence to Correspondence to: Sandra A. de Assis E-mail: sandraassis@uefs.br

ABSTRACT

Inulinase (β-2,1-D- fructan fructanohydrolase), EC 3.2.1.7, targets the β-2,1 linkage of inulin, a polyfructan consisting of linear β-2,1 linked fructose, and hydrolyzes it into fructose. This use provides an alternative to produce fructose syrup through the hydrolysis of inulin. The objective of this work was to study the production, characterization and applications of inulinases from the fungal endophyte CCMB 328 isolated from the Brazilian semi-arid region. Response Surface Methodology (RSM) was employed to evaluate the effect of variables (concentration of glucose and yeast extract), on secreted inulinase activities detected in the culture medium and also in the inulin hydrolysis. The results showed that the best conditions for inulinase production by CCMB 328 are 9.89 g / L for glucose and 1.09 g / L for yeast extract. The concentration of 0.20 mol/L of NaCl and KCl increased the activity of inulinase from CCMB 328 by approximately 63% and 37%, respectively. The results also showed that the inulinase has potential for inulin hydrolysis, whose conversion yields roughly 72.48 % for an initial concentration of inulin at 1% (w/v).

Key words: Inulin, inulinase, yeasts, semi-arid, fungal endophyte.

RESUMO

A enzima inulinase (EC 3.2.1.7, β-D-frutano frutanohidrolase) atua sobre as ligações β-2,1 da inulina, um polifrutano consistindo de frutose unida por ligações β-2,1. A hidrólise de inulina através do uso de inulinase é uma alternativa viável para a obtenção de xarope de frutose. O objetivo deste trabalho foi estudar a produção, caracterização e aplicação de inulinase obtidas a partir do fungo endofítico CCMB 328, isolado do semi-árido brasileiro. A metodologia de Superfície de Resposta (MSR) foi empregado para avaliar os efeitos das variáveis (concentração de glicose e extrato de levedura) na atividade da enzima inulinase produzida em meio de cultura líquido e também para avaliar a atividade da enzima na hidrólise de inulina. Os resultados mostraram que as melhores condições para a produção de inulinase pela levedura CCMB 328 são 9,89 g/L de glicose e 1,09 g/L de extrato de levedura. A concentração de 0,20 mol/L de NaCl e KCl aumentou a atividade da enzima da CCMB 328 em aproximadamente 63% e 37%, respectivamente. Os resultados também mostraram que a enzima inulinase tem potencial para a hidrólise de inulina, apresentando rendimentos de 72,48 % para uma concentração inicial de inulina de 1% (m/v).

Palavras-chave: Inulina, inulinase, leveduras, semi-árido, fungo endofítico.

INTRODUCTION

Inulinase (β-2, 1-D- fructan fructanohydrolase), EC 3.2.1.7, targets the β-2,1 linkage of inulin, a polyfructan consisting of linear β-2,1 linked fructose, and hydrolyzes it into fructose (Gong et al. 2008).

Inulinase can be derived from many micro­organisms. In the last three decades, significant efforts have been made to find the best microbial source for the extraction of inulinase (Ricca et al. 2007, Vijayaraghavan et al. 2009).

Conventional fructose production from starch needs at least three enzymatic steps, including α-amylase, amyloglucosidades, and glucose isomerase action, yielding only 45% of fructose solutions. An alternative to this process is the hydrolysis of inulin by inulinases. The enzymatic formation of fructose from inulin has a single enzymatic step and yields up to 95% of fructose (Figueiredo-Ribeiro et al. 2007). The use of microbial inulinases (EC 3.2.1.7), which yield up to 95% of pure fructose in a single-step enzymatic reaction, is therefore a viable alternative for the production of high-fructose syrup (Gill et al. 2006).

Inulinases have also been used for the production of inulooligosaccharides–low caloric saccharides by acting as a growth factor for beneficial microorganisms in the intestinal flora. They are considered a prebiotic agent (Skowronek and Fiedurek 2006).

The Brazilian semi-arid region represents a large area for bioprospection since it fosters naturally occurring microorganisms adapted to a tropical semi-arid environment, with high temperature and low humidity throughout the year that may possess some features of great industrial interest (Uetanabaro and Góes-Neto 2006).

In this study, we analyzed the production, characterization and application of extracellular inulinases obtained from fungal endophyte (CCMB 328) isolated in the Brazilian semi-arid region.

MATERIALS AND METHODS

CHEMICALS

Inulin, bovine serum albumin, and 3,5-dinitro­salicylic acid were purchased from Sigma Chemical Co. (St Louis, MO, USA). All the other chemicals used were also of high-quality analytical grade.

MICROORGANISMS

The yeast strains fungal endophyte (CCMB 328) is from Culture Collection of Microorganisms of Bahia (CCMB) of Universidade Estadual de Feira de Santana, Brazil (Uetanabaro and Góes-Neto 2006), and was identified in our previous work (Lima et al. 2009).

The yeast strains were maintained in YM agar (3% yeast extract (w/v), 3% malt extract (w/v), 5% peptone (w/v), 10% glucose (w/v), and 20% agar (w/v), pH 6.2).

INULINASE PRODUCTION

The yeast was previously grown on YM agar at 28ºC for 48 h, as described in Oliveira (2007), and diluted in sterile distilled water to a concentration of about 108 colony-forming units/ml. 10% (v/v) of the diluted growth medium was inoculated in flasks containing (per 1 L) mineral medium (CaCl2, 0.25 g; (NH4)2SO4, 3 g; KH2PO4, 4.5; MgSO4, 0.25g ) and supplemented with yeast extract, 1 g; glucose, 10 g; pH 5.0, for fermentation (Patching and Rose 1969). After the incubation at 28ºC for 48 h in an orbital shaker at 150 rpm, the cells were separated by centrifugation at 10,000 g for 10 min at 48ºC, and the supernatant liquid media was used as the extracellular fraction.

BIOMASS QUANTIFICATION

The cells, which were previously separated by centrifugation, were used to determine the dry weight at 80ºC.

ENZYME ASSAYS

The inulinase activity was measured spectro­photometrically using the dinitrosalicylic reagent, as reported by Miller (1959). The reaction mixture consisted of 900 µL of 2 % (w/v) inulin in 0.05 M acetate buffer, pH 5.5, and 100 µL of culture supernatant. The mixture was incubated for 15 min at 50ºC. After incubation, 1 mL dinitrosalicylic reagent was added, and the mixture was boiled at 100ºC for 10 min and cooled with 10 mL of distilled water. One unit of enzyme activity of inulinase was defined as the amount of the enzyme that catalyzed the formation of 1 µmol fructose/min.

PROTEIN DETERMINATION

Total protein determination was performed according to Bradford (1976), using bovine serum albumin as the standard.

DOEHLERT EXPERIMENTAL DESIGN FOR ENZYME PRODUCTION

The Doehlert experimental design, with two variables (concentration of glucose and yeast extract) and three replicates at the center of the domain leading to a total of 9 experiments (Table I), was used to assess the effect of glucose and yeast extract concentration on the production of the enzyme.

Thus, the concentration of glucose was studied in 5 levels (7.5 to 12.5 g/L), and the concentration of yeast extract was studied in three levels (0.5 to 1.5 g/L). The experimental errors were evaluated from the replication of the central point. The experimental data were processed by using the STATISTICA software. All the experiments in this step were carried out in a random order.

To estimate the lack of fit of the model to the experimental data, an analysis of variance (ANOVA) was performed, using Design Statistics, version 7.0.

RESPONSE SURFACE OPTIMIZATION OF TEMPERATURE AND PH

Response surface modeling was applied to cultures of yeast to determine the optimum temperature and pH for the inulinases obtained. This statistical technique for experimental design has advantages over methods that investigate only one variable at a time (Hanrahan and Lu 2006).

The experimental design, with two variables (temperature and pH) and three replicates at the center of the domain leading to a total of 9 experiments (Table II) was used to get the effect of temperature and pH of the inulinase activity.

The pH was studied in 5 levels (5 to 9), and temperature was studied in three levels (30 to 70ºC). The experimental errors were evaluated from the replication of the center point. The experimental data were processed by using the STATISTICA software. All the experiments in this step were carried out in a random order.

To estimate the lack of fit of the model to the experimental data, an analysis of variance (ANOVA) was performed using Design Statistica, version 7.0.

EFFECT OF CATIONS

The effect of Na+ and K+ on the inulinase activity was studied. The concentrations used were: NaCl (0.05, 0.1, 0.15, 0.2, 0.25 and 0.3 mol/L) and KCl (0.05, 0.1, 0.15, 0.2, 0.25 and 0.3 mol/L). The inulinase activity was determined by the standard assay as described previously.

DETERMINATION OF KINETICS PARAMETERS

To obtain the parameters of the Michaelis-Menten kinetics of inulinase for the hydrolysis of inulin, Kmand Vmax, 0.9 µL inulin (1, 1.5, 2.0, 2.5 and 3.0% w/v) was added to 100 µL of inulinase in 0.05 M acetate buffer (pH 5.5) and incubated at 50 ºC for 15 mim. The Kmand Vmax for inulin were determined by the method of Lineweaver-Burk plots.

HYDROLYSIS OF INULIN

The extent of inulin hydrolysis (%) was calculated as × 100 (Nakamura et al. 1995). Total sugars were determined by the anthrone method (Yemm and Willis 1954), and reducing sugars were determined by the dinitrosalicylic acid method (Miller 1959). The Doehlert experimental design, with two variables (concentration of enzyme and fermentation time) and three replicates at the center of the domain leading to a total of 9 experiments (Table IV), was used to get the effect of enzyme concentration and fermentation time on the extent of inulin hydrolysis from a solution of 1% (w / v) in citrate buffer 0.05 M.

THERMOSTABILITY OF INULINASE

Samples of inulinases in test tubes (selected to be equal in weight, volume and size) were incubated in buffer at different temperatures (50ºC, 60ºC, 70ºC, 80ºC and 90ºC) and for various times (0, 10, 20, 30, 40, 50 and 60 min). After the heating process, the tubes were cooled in melting ice and the residual activity measurement was carried out at pH 6.0 and at a temperature of 50ºC.

RESULTS AND DISCUSSION

PRODUCTION OF INULINASES BY YEASTS

Table I shows the Doehlert design applied to optimize the production of inulinase by fungal endophyte CCMB 328. The first column describes the number of planning, with C representing the central compound. In the second and third columns we have the values of glucose concentration and the concentration of yeast extract, respectively. The fourth column represents the enzymatic activity. The last column represents the predicted values.

The response surface graphics (Figures 1 and 2) shows the influence of glucose and yeast extract concentrations in the production of inulinase of CCMB 328. From the analysis of the area chart in Figures 1 and 2 it can be concluded that the production of inulinase by CCMB 328 strains clearly peaks for glucose concentrations in excess of 10 g/L glucose for the whole range of concentrations of yeast extract tested.



Equation 1 illustrates the relation of these two variables and the enzyme activity (UA), where G is the glucose concentration g/L and YE is the yeast extract concentration g/L:

UA = -13.6433 + 2.3911(G) – 0.1202 (G)2 + 10.7575 (YE) -4.9122 (YE)2 – 0.00812 (G).(YE).

Through the derivation of this equation, the media composition, regarding glucose and yeast extract concentrations, which are expected to allow for the production of maximum enzymatic activity, can be obtained. For CCMB 328 the conditions are 9.89 g / L for glucose and 1.09 g /L for yeast extract.

Kalil (2004) used the technique of factorial design and response surface analysis to optimize the culture medium for inulinase production by Kluyveromices marxianus According to his results, the best concentration of yeast extract was 10 g / L.

Schneider (1996) studied the production of inulinase by Kluyveromices marxianus and found that the presence of yeast extract is essential for the growth of microorganisms and enzyme production.

The chart of Paretto (Figure 3) shows that the variables glucose concentration and yeast extract concentration are linearly and quadratically significant for the production of inulinase fungal endophyte CCMB 328, because both variables have a P value greater than 0.05.


The statistical significance of the regression can be assessed by the ratio of the mean square regression and mean square of the residue, as well as by comparing these sources of variation using the Fisher distribution (F test) (Table III). Thus, a statistically significant value of this ratio must be greater than the tabulated value for F. The calculated F value from the ANOVA table (712.55) was higher than the F tabulated (9.01), showing that the function is well suited to the answers.

RESPONSE SURFACE OPTIMIZATION OF TEMPERATURE AND PH

Table III shows the Doehlert design applied to the optimization of temperature and pH inulinase obtained by fungal endophyte CCMB 328.

The influence of temperature and pH on the activity of the enzyme was investigated for CCMB 328 by the surface response methodology. The results are shown in Figures 4 and 5.



The regression model provided for the enzyme activity in relation to pH and temperature in the experimental design is expressed by Equation 2:

UA = -4.4934+1.9239(pH) -0.1367(pH)2 + 0.0356(T) -0.0004(T)2+0.0004(pH).(T)

This equation illustrates the relationship of these two variables with the enzyme activity (UA) where P is the pH and T is the temperature (ºC). Through the derivation of this equation, the points of maximum enzymatic activity could be obtained. According to this methodology, the optimal pH and temperature values were 7.11 and 48.35ºC, respectively.

Regarding to the pH of the enzymatic reaction, although the microbial inulinases are described as stables from pH 3.5 to 6.5 ours results indicate a maximum inulinase activity at pH 7.11. In relation to the reaction temperature, it was observed that the maximum enzymatic activity at 48.35ºC. Similar values were found in Cazetta et al. (2005).

The Paretto chart (Figure 6) shows that the temperature concentration and pH variables are independent for the production of inulinase from fungal endophyte CCMB 328 because this had a p value less than 0.05.


The statistical significance of the regression can be assessed by the ratio of the mean square regression and the mean square of the residue, as well as by comparing these sources of variation using the Fisher distribution (F test) (Table IV). Thus, a statistically significant value of this ratio must be greater than the tabulated value for F. The F value calculated from the ANOVA table (75.71) was higher than the F tabulated (9.01), showing that the function is well suited to the answers.

EFFECT OF CATIONS

The effect of salts NaCl and KCl on the activity of inulinase is presented in Figure 7. The concentration of 0.20 mol/L of NaCl and KCl increased the activity of inulinase from CCMB 328 by approximately 63% and 37%, respectively. A KCl concentration higher than 0.20 mol/L decreases the activity of the enzyme (Figure 7).


Our results were similar to those observed by Sheng (2007) who reported an increase in the enzymatic activity at 62.2% in the presence of KCl.

Ohta et al. (2002), using inulinases produced by Rhizous, noted that the presence of KCl did not change the enzyme activity.

KINETICS PARAMETERS

The Lineweaver-Burk plot showed that the Km and Vmax values of the enzyme inulinase were 7.53 mg/mL and 2.34 µmol/mL.min-1, respectively (Figure 8). While assessing the kinetic characterization of the inulinase from A. niger 20 OSM, Showronek and Fiedureki (2006) reported Km and Vmax values of 6.7 g/L and 0.0476 mg/mL/min, respectively.


HYDROLYSIS OF INULIN

Table V shows the Doehlert design applied to optimize the hydrolysis in function of time of reaction and enzyme concentration of inulin by fungal endophyte CCMB 328 inulinase.

The hydrolysis time was studied in five levels (1 to 15 minutes), and enzyme concentration was studied in three levels (1 to 5%) (Figures 9 and 10).



The experimental errors were evaluated from the replication of the central point. The experimental data were processed by using the STATISTICA software. All the experiments in this step were carried out in a random order.

Equation 3 illustrates the relationship of these two variables with the extent of hydrolysis (% H), where C is the Enzyme Concentration (% v/v) and T is time (min). Through the derivation of this equation, the points of maximum enzymatic activity were obtained.

% H = 2.3208 + 29.5811 (C) -3.0040 (C)2 + 2.5787 (T) -0.1986 (T)2 -0.0342 (C)(T)

Through the derivation of this equation, the points of maximum enzymatic activity were obtained. In this work the highest productivity, based on the extent of hydrolysis, was observed for 4.90 % of enzyme and at 6.0 minutes of incubation. There are few studies of inulin hydrolyses using the same conditions and RSM analysis, as performed in this work.

The Paretto chart (Figure 11) shows that the variables temperature concentration and pH are independent for the production of inulinase CCMB 328, because s had a p value less than 0.05.


The statistical significance of the regression (Table VI) can be assessed by the ratio of the mean square regression and mean square of the residue, as well as by comparing these sources of variation using the Fisher distribution (F test).Thus, a statistically significant value of this ratio must be greater than the tabulated value for F. The F value calculated from (201.2) was higher than the F tabulated (9.01), showing that the function is well suited to the answers.

CONCLUSION

In this work the production and characterization of inulinase by fungal endophyte CCMB 328 was effectively performed. The enzyme was afterwards used in the hydrolysis of inulin whose a conversion yields of roughly 72.48 % for an initial concentration of inulin of 1% (w/v). Therefore, the inulinase from this yeast is a potential candidate for inulin hydrolysis in the food industry.

Using the response surface methodology it was possible to determine the best media composition for obtaining inulinase from fungal endophyte CCMB 328. This corresponds to a medium containing 9.89 g / L for glucose and 1.09 yeast extract. This statistical method was also used to access the optimum pH (7.11) and temperature (48.38ºC) for fermentative inulinase production.

The combination of results obtained in this work (enzymatic characterization and hydrolysis of inulin) can provide useful guidelines for the utilization of inulinase from CCMB 328 for fructose production at pilot scales.

This optimization through response surface methodology can be used in future industrial scale fermentation and promote the rational use of enzymes and substrates in the process.

ACKNOWLEDGMENTS

This work was supported by Financiadora de Estudos e Projetos (FINEP), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior CAPES), Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) and Fundação de Amparo à Pesquisa do Estado da Bahia (FAPESB). We also thank the Programa de Pós Graduação em Biotecnologia (PPGBiotec-UEFS) and Doctor Marcos Almeida Bezerra by corrections in the statistical design.

Manuscript received on December 1, 2010; accepted for publication on February 23, 2011

  • BRADFORD M. 1976. A Rapid and Sensitive Method for the Quantitation of Microgram Quantities of Protein Utilizing the Principle of Protein-Dye Binding. Anal Biochem 72: 248-254.
  • CAZETTA ML, MARTINS PMM, MONTI R AND CONTIERO J. 2005. Yacon (Polymnia sanchifolia) extract as a substrate to produce inulinase by Kluyveromyces marxianus var. bulgaricus J Food Eng 66: 301-305.
  • FIGUEIREDO-RIBEIRO RCL, PESSONI RA AND BRAGA MR. 2007. Inulinases produced by microbes from the brazilian cerrado: characterization and potential uses. In: Shiomi N, Benkeblia N and Onodera S (Org), Recent advances in fructooligosaccharides research. 1st ed., Kerala: research signpost press 18: 339-356.
  • GILL P, MANHAS R, SINGH J AND SINGH P. 2006. Purification and properties of a heat-stable exoinulinase isoform from Aspergillus fumigatus J Food Eng 76: 369375.
  • GONG F, ZHANG T, CHI Z, SHENG J AND LI J. 2008. Purification and characterization of extracellular inulinase from a marine yeast Pichia guilliermondii and inulin hydrolysis by the purified inulinase. Biotech Bioprocess Eng 13: 533-539.
  • HANRAHAN G AND LU K. 2006. Application of factorial and response surface methodology in modern experimental design and optimization. Crit Rev Anal Chem 36: 141-151.
  • KALIL SJ, MAUGERI F AND RODRIGUES MI. 2004. Ion exchange expanded bed chromatography for the Purification of an Extracelular Inulinase from Kluyveromyces marxianus Process Biochem 40: 581-586.
  • LIMA DM, OLIVEIRA RQ, UETANABARO APT, GOES NETO A, ROSA CA AND ASSIS S. 2009. Thermostable inulinases secreted by yeasts. Int J Food Sci Nutr 60: 63-71.
  • MILLER GL. 1959. Use of dinitrosalicylic acid reagent for determination of reducing sugar. Anal Chem 3: 426-428.
  • NAKAMURA T, OGATA Y, SHITARA A, NAKAMURA A AND OHTA K. 1995. Continuous production of fructose Syrups from inulin by immobilized inulinase from Aspergillus niger mutant 817. J Ferment Bioengineering 80: 164-169.
  • OLIVEIRA RQ. 2007. Bioprospecção de microrganismos leveduriformes produtores de pectinase extracellulares isolados do Semi-árido baiano. MSc Dissertation, Univ. Estadual de Feira de Santana. (Unpublished).
  • OHTA K, SUETSUG N and NAKAMURA T. 2002. Purification and properties of an extracellular inulinase from Rhizophus sp. Strain Tn-96. J Biosci Bioeng 1: 78-80.
  • PATCHING JW AND ROSEA H. 1969. The effects and control of temperature. In: Methods irz Microbiology, Edited by Norris JR and Ribbons DW. London: Academic Press 2: 23-38.
  • RICCA E, CALABRO V, CURCIO S AND LOIRO G. 2007. The state of the art in the production of fructose from inulin enzymatic hydrolysis. Crit Rev Biotechnol 27: 129-145.
  • SCHNEIDER ALS. 1996. Estudo da Produção de Inulinase por Kluyveromyces marxianus ATCC 36907. MSc dissertation FEQ-UFSC. (Unpublished).
  • SHENG J, CHU Z, LI J, GAO L AND GONG F. 2007. Inulinase production by the marine yeast Cryptococcus aureus G7a and inulin hydrolysis by the crude inulinase. Process Biochem 42: 805811.
  • SHOWRONEK M AND FIEDUREK J. 2006. Inulinase biosynthesis using immobilized mycelium of Aspergillusniger Enzyme Microb Technol 38: 162-167.
  • UETANABARO APT AND GÓES-NETO A. 2006. Importance of culture collections of microorganisms (CCMs) for the conservation of microbial biotechnological resources of the Brazilian semi-arid region. In: Towards greater knowledge of the Brazilian semi-arid biodiversity. 1st ed., Brasília, DF. Ministério da Ciência e Tecnologia, p. 41-43.
  • VIJAYARAGHAVAN K, YAMINI D, AMBIKA V AND SOWDAMINI NS. 2009. Trends in inulinase production a review. Crit Rev Biotechnol 29: 67-77.
  • YEMM EM AND WILLIS AJ. 1954. The estimation of carbohydrates in plant extracts by anthrone. Biochem J 57: 508-514.
  • Correspondence to:

    Sandra A. de Assis
    E-mail:
  • Publication Dates

    • Publication in this collection
      24 May 2012
    • Date of issue
      June 2012

    History

    • Received
      01 Dec 2010
    • Accepted
      23 Feb 2011
    Academia Brasileira de Ciências Rua Anfilófio de Carvalho, 29, 3º andar, 20030-060 Rio de Janeiro RJ Brasil, Tel: +55 21 3907-8100 - Rio de Janeiro - RJ - Brazil
    E-mail: aabc@abc.org.br