Acessibilidade / Reportar erro

Development, characterization and chemometric analysis of a gluten-free food bar containing whole flour from a new cultivar of amaranth

Desenvolvimento, caracterização e análise quimiométrica de barra alimentícia sem glúten contendo farinha de um novo cultivar de amaranto

Abstracts

Food bars are consumed heavily, especially because of their practicality; however they cannot be ingested by celiac patients and present low contents of essential nutrients. The goal of this study was the development and physical-chemical, nutritional and sensory evaluation of a gluten-free food bar containing amaranth and linseed. Gluten fractions were not detected in the food bar formulations. Crude protein and total lipid contents ranged from 68.32 to 76.60 and 74.56 to 82.06 g kg-1 of food, respectively. The polyunsaturated/saturated and n-6:n-3 fatty acid ratios ranged from 0.45:1 to 0.55:1 and 1.44:1 to 2.50:1, respectively. Calcium, magnesium, copper, iron, manganese and zinc were the principal minerals. Application of multivariate analysis enabled sample B to be distinguished according to its mineral and alfa-linolenic acid content. All food bar formulations had good sensory acceptance and high purchase intent.

Principal component analysis; pseudo-cereals; linseed; fatty acids


Barras alimentícias são muito consumidas, especialmente por sua praticidade; no entanto apresentam baixos teores de nutrientes essenciais e, em sua maioria, não podem ser ingeridas por pessoas celíacas. O objetivo deste estudo foi o desenvolvimento, avaliação físico-química, nutricional e sensorial de barras alimentícias sem glúten contendo amaranto e linhaça. As barras alimentícias formuladas não apresentaram frações de glúten. Os teores de proteína bruta e lipídios totais variaram entre 68,32-76,60 e 74,56-82,06 g kg-1 de alimento, respectivamente. As razões entre ácidos graxos poli-insaturados/saturados e n-6:n-3 variaram de 0,45:1 para 0,55:1 e 1,44:1 para 2,50:1, respectivamente. Os principais minerais foram o cálcio, magnésio, cobre, ferro, manganês e zinco. Aplicação de análise multivariada permitiu diferenciar a amostra B das demais em relação ao seu conteúdo mineral e teor de ácido alfa-linolênico. Todas as barras formuladas tiveram boa aceitação sensorial e intenção de compra elevada.

Análise de componentes principais; pseudocereal; linhaça; ácido graxo


FOOD SCIENCE AND TECHNOLOGY

Development, characterization and chemometric analysis of a gluten-free food bar containing whole flour from a new cultivar of amaranth

Desenvolvimento, caracterização e análise quimiométrica de barra alimentícia sem glúten contendo farinha de um novo cultivar de amaranto

Lilian Maria PagamuniciI; Aloisio Henrique Pereira SouzaI; Aline Kirie GoharaI; Nilson Evelázio SouzaI; Sandra Terezinha Marques GomesII; Makoto MatsushitaIII

IUniversidade Estadual de Maringá/UEM - Maringá - PR - Brasil

IIUniversidade Tecnológica Federal do Paraná/UTFPR - Londrina - PR - Brasil

IIIUniversidade Estadual de Maringá/UEM - Departamento de Química - Avenida Colombo - n. 5790 - 87020 -900 - Maringá - Paraná - Brasil - mmakoto@uem.br

ABSTRACT

Food bars are consumed heavily, especially because of their practicality; however they cannot be ingested by celiac patients and present low contents of essential nutrients. The goal of this study was the development and physical-chemical, nutritional and sensory evaluation of a gluten-free food bar containing amaranth and linseed. Gluten fractions were not detected in the food bar formulations. Crude protein and total lipid contents ranged from 68.32 to 76.60 and 74.56 to 82.06 g kg-1 of food, respectively. The polyunsaturated/saturated and n-6:n-3 fatty acid ratios ranged from 0.45:1 to 0.55:1 and 1.44:1 to 2.50:1, respectively. Calcium, magnesium, copper, iron, manganese and zinc were the principal minerals. Application of multivariate analysis enabled sample B to be distinguished according to its mineral and alfa-linolenic acid content. All food bar formulations had good sensory acceptance and high purchase intent.

Index terms: Principal component analysis, pseudo-cereals, linseed, fatty acids.

RESUMO

Barras alimentícias são muito consumidas, especialmente por sua praticidade; no entanto apresentam baixos teores de nutrientes essenciais e, em sua maioria, não podem ser ingeridas por pessoas celíacas. O objetivo deste estudo foi o desenvolvimento, avaliação físico-química, nutricional e sensorial de barras alimentícias sem glúten contendo amaranto e linhaça. As barras alimentícias formuladas não apresentaram frações de glúten. Os teores de proteína bruta e lipídios totais variaram entre 68,32-76,60 e 74,56-82,06 g kg-1 de alimento, respectivamente. As razões entre ácidos graxos poli-insaturados/saturados e n-6:n-3 variaram de 0,45:1 para 0,55:1 e 1,44:1 para 2,50:1, respectivamente. Os principais minerais foram o cálcio, magnésio, cobre, ferro, manganês e zinco. Aplicação de análise multivariada permitiu diferenciar a amostra B das demais em relação ao seu conteúdo mineral e teor de ácido alfa-linolênico. Todas as barras formuladas tiveram boa aceitação sensorial e intenção de compra elevada.

Termos para indexação: Análise de componentes principais, pseudocereal, linhaça, ácido graxo.

INTRODUCTION

Celiac disease, intolerance to the intake of gluten protein, arises from its resistance to digestive enzymes and affects genetically predisposed individuals by triggering an inflammatory response (Arendt et al., 2008). The amaranth (Amaranthus spp.) from the Andean region is classified as a pseudo-cereal. Cultivar Amaranthus cruentus BRS Alegria was genetically modified for central-western Brazil climate conditions and to remove saponins while still maintaining its chemical composition (Spehar et al., 2003). Levels of 20.92% crude protein, 64.80% carbohydrate, 8.68% total lipids and 3.42% minerals, respectively, have been reported for this cultivar of amaranth (Palombini et al., 2013). Levels of 12.2-13.8% crude protein, 67.4-69.2% carbohydrate, 9.7-12.9% dietary fiber, 5.0-6.3% total lipids and 2.5-3.4% minerals, respectively, have been reported for amaranth (Arendt et al., 2008; Gutiérrez et al., 2010). The linseed (Linum usitatissimum L.), high levels of crude fiber and total lipids, 8.3 and 43.9%, respectively, are also found in linseed (Gutiérrez et al., 2010). Food bars or cereal bars normally have high contents of soluble and insoluble fibers, lipids and carbohydrates, but low protein content, thus being an energy source (Mahanna; Lee, 2010). The goal of this paper was the development, quimiometric analysis, physico-chemical, sensory and nutritional assessment of gluten-free food bars containing amaranth and linseed.

MATERIAL AND METHODS

Sampling and formulations

The grains of A. cruentus BRS Alegria were provided by Embrapa. The other ingredients were purchased from local shops in Maringá, Paraná state. The food bar formulations (Table 1) consisted of a binder phase (syrup) and a solid phase (grains, nuts and raisins). The binder phase was heated under stirring and the soluble sugar content was measured until it reached 85-89ºBrix on a digital refractometer (Leica Microsystems Inc., USA). The phases were mixed and pressed to obtain a form with dimensions 90 mm X 30 mm X 15 mm weighing 25 g. These bars were then covered with melted chocolate (0.1-0.2mm thickness).

Fatty acid composition, mineral quantification and chemical analysis

The moisture, ash and crude protein contents were determined according to Cunniff (1998) using a factor of 5.80 (Arendt et al., 2008 ; Palombini, 2013) to convert the percentage of nitrogen into crude protein content. The total lipids were determined according to Bligh and Dyer (1959).

To determine the fatty acid composition, the lipids were converted into fatty acid methyl esters (FAME) and methylated according to Hartman and Lago (1973). The FAME were separated in a gas chromatograph CP-3380 (Varian, USA) fitted with a flame ionization detector and a CP 7420-select Fame fused-silica capillary column (100 m x 0.25 mm x 0.25 µm cyanopropyl). The gas flows were 1.4 mL min-1 carrier gas hydrogen, 30 mL min-1 make-up gas nitrogen, 300 mL min-1 synthetic air and 30 mL min-1 flame gas hydrogen; the sample was injected in a split ratio of 1:100. The injector and detector temperatures were both 235 °C. The column temperature was maintained at 165 °C for 4 min, then increased 4 °C min-1 to 185 °C and maintained for 5 min, then raised to 225 ºC at 10 °C min-1 and maintained for another 10 min. (Souza et al., 2013). The retention times were compared to those of standard methyl esters (Sigma, USA). The fatty acids were identified using tricosanoic acid methyl ester (Sigma, USA) as an internal standard, following Joseph and Ackman (1992). The peak areas were determined with Star 5.0 software (Varian, USA) and the concentrations were expressed in mg kg-1 of food.

For the mineral composition analysis, the samples were digested by the dry method (AOAC, 1995) and Ca, Cu, Fe, Mg, Mn and Zn were quantified in an atomic absorption spectrophotometer AA240FS (Varian, USA) as mg of mineral per kg of product using standard solutions and analytical curves.

Indices of the nutritional quality of lipids and gluten test

The gluten fractions in the final products were determined using a commercial ELISA kit (Enzyme-linked immunosorbent assay)-R5 Ridascreen® Gliadin (R-Biopharm, Germany), a Sunrise spectrophotometer (Tecan, Switzerland) at 450 nm, and Rida-Win software (R-Biofarm, Germany). The limits of detection and quantification of the method were 1.50 ng gliadin mL-1 (or 3.00 ng gluten mL-1) and 2.50 ng gliadin mL-1 (or 5.00 ng gluten mL-1), respectively, with a sensitivity greater than 2.00 mg gluten 100 g-1 of food, as recommended by the Codex Food Commission (1983).

A better approach to the nutritional evaluation of fat is utilization of indices based on the functional effects of fatty acid composition. These indices were available as the index of atherogenicity (IA) = [(12:0 + (4 x 14:0) + 16:0)] / (ΣMUFA + Σn-6 +Σn-3), and index of thrombogenicity (IT) = (14:0 + 16:0 + 18:0) / [(0.5 x ΣMUFA) + (0.5 x Σn-6) + (3 x Σn-3) + (Σn-3/Σn-6)], by Ulbricht and Southgate (1991), as well as the hypocholesterolemic/hypercholesterolemic fatty acid ratio (HH) = (18:1n-9 + 18:2n-6 + 20:4n-6 + 18:3n-3 + 20:5n-3 + 22:5n-3 + 22:6n-3) / (14:0 +16:0), according to Santos-Silva, Bessa and Santos-Silva (2002).

Ethical aspects and sensory analysis

A group of 80 untrained volunteer panelists and potential consumers of the products developed participated in the sensory analysis, which consisted of acceptance testing, preference ordering and intent of purchase of the formulations developed. In the acceptance test, appearance, flavor, texture, crispness and overall acceptance of the food bar were assessed using a 9-point hedonic scale (1 = extremely dislike to 9 = extremely like). The samples were presented in random complete blocks for comparison. The index of acceptability (IA) of the products was calculated as (global aspect grade x 100%) / 9, where nine was the maximum score on the hedonic scale. The lowest IA value for considering the products well accepted by the consumers was 70%. The ordering test assessed the preference for each formulation; the results were obtained by summing the order values of each sample. The purchase intent test was determined using a 5-point scale (1 = definitely would not buy and 5 = definitely would buy) (Lawless; Heymann, 2010).

The sensory testing in this study was approved by the Standing Committee on Ethics in Research Involving Human Beings of Maringá State University, CAAE File No. 0433.0.093.000-10.

Statistical analysis

Fatty acid composition, mineral, instrumental and physical-chemical analyses were carried out in triplicate. The results were submitted to variance analysis (ANOVA) and the means were compared using Tukey's post hoc. Friedman's test was used only for the Preference Ordering test, according to Lawless and Heymann (2010). The multivariate analysis was performed by applying Principal Component Analysis (PCA). The average of three individual batches was used with respect to the sums and ratios of fatty acids, mineral composition and sensory attributes. The averages were autoscaled using NIPALS algorithm. The statistical software SAS, version 7.0, was used with a 5% (p < 0.05) significance level for rejection of the null hypothesis.

RESULTS AND DISCUSSION

Gluten fractions were not detected by the ELISA test in either the grains or the gluten-free food bar formulations developed, corroborating studies that have shown the absence of gluten in other varieties of the same species of grains (Alvarez-Jubete et al., 2010). The results of the physical-chemical analyses are shown in table 2. The crude protein content showed significant differences (p <0.05) because it increased progressively and proportionally with increasing grain concentrations in the food bar formulations, corroborating studies accomplished by Enriquez et al. (2003).

According to Brasil, (1998) the food bars can be considered a "source of protein" because they presented 10% of the DRI (Recomended Daily Intake) for adults (50 g day-1) in 100 g of product. According to Gutierrez et al. (2010), linseed has a mineral content of 2.66%, while pseudo-cereals have approximately 3% (Palombini et al., 2013), which contributed to the high mineral content of the products developed. There was a difference (p < 0.05) in total lipids between the samples. The food bar formulations presented proximal composition and percent energy similar to those of Freitas and Moretti (2006), Souza et. al. (2014) and (Pagamunici et al., 2014).

Table 3 presents thrombogenicity and atherogenicity indices. The major ratios HH and PUFA:SFA (Table 3) are important due to their hypocholesterolemic effect and the prevalence of polyunsaturated fatty acids are related to lowered risk of cardiovascular disease (Ratnayake; Galli, 2009). The saturated fatty acid contents of food bars A, B and C were 4.02, 3.87 and 3.63%, respectively (Table 3). Excessive consumption of lipids and an unbalanced n-6:n-3 ratio are related to a higher frequency of myocardial infarction cases, hypercholesterolemia, increased low density lipoprotein (LDL) cholesterol and blood pressure, atheroma, lipid disorders and other disorders. The n-6:n-3 ratio of the food bars ranged from 1.4:1 to 2.5:1, which is near the ideal value of 1:1 (Simopoulos, 2011). These fatty acids ratios and indexes were similar to those reported by Souza el al. (2014).

As shown in table 4, the major mineral component was Mg and Ca for all the formulations. The first plays a vital role in a wide range of biochemical and physiological processes and the presence of calcium in the diet contributes to increasing the bioavailability and absorption of Mg, Mn and Zn. The content of the trace mineral Zn in the samples varied significantly (p < 0.05). These minerals are essential for the maintenance of biological systems because they participate as cofactors in metabolic reactions (Hathcock, 2004). Studies about cookie (Pagamunici et al., 2014), and granola (Souza et al., 2014) found similar results for mineral contents. Besides, the levels of all minerals were much bigger than the levels found in chocolate cakes using psudocereal chia (Gohara et al., 2013).

The acceptance test results are shown in table 5. The attributes flavor and acceptance ranged from slightly liked to moderately liked with a significant difference (p < 0.05). The food bars were considered well accepted when the acceptance rate was above 70%, as proposed by Lawless and Heymann (2010). The formulations showed no differences (p < 0.05) in preference ordering by the Friedman's test. As to the purchase intent results, ranging from probably buy to surely buy, the consumption potentials of the gluten-free food bars were above 85% for all the formulations.

Figures 1, 2 and 3 show the principal component analysis (PCA). The NIPALNS algorithm enabled selection of PC1, PC2 and PC3, which were significant (p < 0.05) and explained 99.67, 89.81 and 99.87% of the data variance, respectively, in fatty acids/nutritional indices, mineral and sensory attributes. Figure 1A on PC1 enabled formulation A to be distinguished due to the positive contributions of SFA, MUFA, n-6, n-6:n-3 and IT. By analyzing PC2 and PC3 (Figures 1A and 1B), formulation C obtained positive contributions in the sums of SFA, MUFA and n-6, and in the PUFA:SFA ratio, which was different from the others.




As shown in figure 2A, all minerals made a positive contribution in PC1, but only copper and iron presented positive contributions in PC3 (Figure 2B). The minerals Ca and Cu in PC2 (Figure 2A) were responsible for the differentiation of formulation A.

In a multivariate analysis of all sensory attributes, all of them were highly significant in PC1, as shown in Figure 3A, distinguishing sample A, which recorded the highest scores for all attributes (Table 5). In PC2 and PC3 (Figures 3A and 3B), respectively, texture and flavor attributes made positive contributions to samples B and A.

Although there was no significant difference (p < 0.05) in some of the parameters analyzed, the principal component analysis allowed apparently equal samples to be distinguished according to loadings (studied parameters) and scores (samples).

CONCLUSIONS

The use of naturally gluten-free ingredients allowed the development of food bar formulations for celiac disease patients. Promising grains like amaranth and linseed contributed to increasing the protein, lipid and mineral contents in the products. The evaluation of the nutritional indices in the lipid fraction verified their anti-atherogenic, anti-thrombogenic and hypocholesterolemic effects and good ratios for PUFA:SFA and n-6:n-3, corroborating other studies. All formulations are good sources of minerals. With respect to sensory analysis, there was no preference for a specific formulation and the purchase intent indices were high. Application of multivariate analysis allowed sample B to be distinguished due to the contributions of alpha-linolenic acid and mineral content to the weights of its constituents.

Received in september 30, 2013 and approved in april 8, 2014

  • ALVAREZ-JUBETE, L. et al. Polyphenol composition and in vitro antioxidant activity of amaranth, quinoa buckwheat and wheat as affected by sprouting and baking. Food Chemistry119(2):770-778, 2010.
  • AOAC. Association of Official Analytical Chemists. Method 985.35. In: _____. Official methods of analysis of AOAC international 16 ed. Washington: AOAC, 1995. 14p.
  • ARENDT, E.K. et al. Gluten-free cereal products and beverages London: Elsevier, 2008, p. 289-311.
  • BLIGH, E.G.; DYER, W.J. A rapid method of total lipid extraction and purification. Canadian Journal of Biochemistry and Physiology 37(8):911-917, 1959.
  • BRASIL. Regulamento técnico Mercosul sobre informação nutricional complementar RDC n°54. Brasília: Diário Oficial da República Federativa do Brasil, 2012.
  • CODEX FOOD COMISSION. Codex Committee on Nutrition and Food for Special Dietary Uses. Codex standard for "gluten-free foods" Rome: Codex, 1983.
  • CUNNIFF, P.A. Official methods of analysis of AOAC international 16 ed. Washington: AOAC, 1998.
  • ENRIQUEZ, N. et al. Characterization of wheat and quinoa flour blends in relation to their breadmaking quality. Journal of the Argentine Chemical Society 91(4/6):47-54, 2003.
  • FREITAS, D.G.; MORETTI, R.H. Characterization and sensorial evaluation of functional cereal bar. Ciência e Tecnologia de Alimentos 26(2):318-324, 2006.
  • GOHARA, A.K. et al. Chemometric methods applied to the mineral content increase in chocolate cakes containing chia and azuki. Journal of the Brazilian Chemical Society 24(5):771-776, 2013.
  • GUTIÉRREZ, C. et al. Flaxseed and flaxseed cake as a source of compounds for food industry. Journal of Soil Science and Plant Nutrition10(4):454-463, 2010.
  • HARTMAN, L.; LAGO, R.C. Rapid preparation of fatty acid methyl esters from lipids. Laboratory Practice 22(6):475-477, 1973.
  • HATHCOCK, J.N. Vitamin and mineral safety 2.ed. Washington: Council for Responsible Nutrition, 2004. 169p.
  • JOSEPH, J.D.; ACKMAN, R. Capillary column gas chromatographic method for analysis of encapsulated fish oils and fish oil ethyl esters: collaborative study. Journal of AOAC International 75(3):488-506, 1992.
  • LAWLESS, H.T.; HEYMANN, H. Sensory evaluation of food: principles and practices 2.ed. Berlin: Springer. 2010. 586p.
  • MAHANNA, K.; LEE, S.Y. Consumer acceptance of food bars. Journal of Sensory Studies 25(1):153-170, 2010.
  • PAGAMUNICI, M.P. et al. Using chemometric techniques to characterize gluten-free cookies containing the whole flour of a new quinoa cultivar. Journal Brazilian of the Chemical Society 25(2):219-228, 2014.
  • PALOMBINI, S.V. et al. Evaluation of nutritional compounds in new amaranth and quinoa cultivars. Food Science and Technology 33(2)339-344, 2013.
  • RATNAYAKE, W.M.; GALLI, C. Fat and fatty acid terminology, methods of analysis and fat digestion and metabolism: a background review paper. Annals of Nutrition and Metabolism 55(1-3):8-43, 2009.
  • SANTOS-SILVA, J.; BESSA, R.J.; SANTOS-SILVA, F. Effect of genotype, feeding system and slaughter weight on the quality of light lambs. II. Fatty acid composition of meat. Livestock Production Science77(2-3):187-194, 2002.
  • SIMOPOULOS, A. Evolutionary aspects of diet: the omega-6/omega-3 ratio and the brain. Molecular Neurobiology44(2):203-215, 2011.
  • SOUZA, A.H.P. et. al. Development, characterization and chemometric analysis of gluten-free granolas containing whole flour of pseudo-cereals new cultivars. Acta Scientiariarum. Techonology 36(1):157-163, 2014.
  • ________. Sacha inchi as potencial source of essential fatty acids and tocopherols: multivariate study of nut and shell. Acta Scientiariarum. Techonology 35(4):757-763, 2013.
  • SPEHAR, C.R. et al. Amaranth BRS Alegria: alternative for diversification of croppings systems. Pesquisa Agropecuaria Brasileira 38(5):659-663, 2003.
  • ULBRICHT, T.L.; SOUTHGATE, D.A. Coronary heart disease: seven dietary factors. Lancet 338(8773):985-992, 1991.
  • ZAVAREZE, E.R. et. al. Development of oxidised and heat-moisture treated potato starch film. Food Chemistry132(1):344-350, 2012.

Publication Dates

  • Publication in this collection
    01 July 2014
  • Date of issue
    June 2014

History

  • Accepted
    08 Apr 2014
  • Received
    30 Sept 2013
Editora da Universidade Federal de Lavras Editora da UFLA, Caixa Postal 3037 - 37200-900 - Lavras - MG - Brasil, Telefone: 35 3829-1115 - Lavras - MG - Brazil
E-mail: revista.ca.editora@ufla.br