Brazilian Amazon is a vast territory rich in natural renewable and non-renewable resources. Due to the adverse environmental condition (rain, cloud, dense vegetation) and difficult access, topographic information is still poor, and when available needs to be up-dated or remapped. In this paper, the feasibility of using elevation generated from orbital ASTER- stereo-pairs images for topographic mapping was investigated for the mountainous relief in the Serra dos Carajás, Pará. The quality of information derived from these optical images was evaluated regarding field altimetric measurements. Precise topographic field information acquired from Global Positioning System (GPS) was used as Ground Control Points (GCPs) for the modeling of the stereoscopic Digital Elevation Models (DEMs) and as Independent Check Points (ICPs) for the calculation of elevation accuracies. The analysis was performed following two approaches: (1) the use of Root Mean Square Error (RMSE) and (2) calculations of trend analysis and accuracy. The investigation has shown that the altimetric accuracy from ASTER fulfilled the Brazilian Map Accuracy Standards elevation requirements for 1:100,000 A Class. In addition, ASTER can provide up-dated planimetric information that is also necessary for cartographic production. Thus, when the environment condition allows the acquisition of stereo-pairs, the use of ASTER can be considered an alternative for semi-detailed topographic mapping in similar environments of the Brazilian Amazon.
topographic mapping; DEM; ASTER; stereoscopy; Amazon Region
